status = "disabled";
};
- usb_phy0: usb-phy@18030000 {
+ usb_phy0: usb-phy0@18030000 {
compatible ="qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+ reg = <0x18030000 4>, <0x18030004 4>;
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst 4>, <&rst 3>;
status = "disabled";
};
- usb_phy1: usb-phy {
+ usb_phy1: usb-phy1@18030010 {
compatible = "qca,qca9550-usb-phy", "qca,ar7200-usb-phy";
+ reg = <0x18030010 4>, <0x18030014 4>;
reset-names = "usb-phy", "usb-suspend-override";
resets = <&rst2 4>, <&rst2 3>;
pinmux: pinmux@1804002c {
compatible = "pinctrl-single";
- reg = <0x1804002c 0x40>;
+ reg = <0x1804002c 0x44>;
#size-cells = <0>;
pll: pll-controller@18050000 {
compatible = "qca,ar9557-pll",
- "qca,qca9550-pll";
+ "qca,qca9550-pll", "syscon";
reg = <0x18050000 0x50>;
#clock-cells = <1>;
rst: reset-controller@1806001c {
compatible = "qca,qca9550-reset",
- "qca,ar7100-reset",
- "simple-bus";
+ "qca,ar7100-reset";
reg = <0x1806001c 0x4>;
#reset-cells = <1>;
interrupt-parent = <&cpuintc>;
- intc2: interrupt-controller@2 {
+ intc2: interrupt-controller2 {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
<0x1f0>; /* pcie rc 0 */
};
- intc3: interrupt-controller@3 {
+ intc3: interrupt-controller3 {
compatible = "qca,ar9340-intc";
interrupt-parent = <&cpuintc>;
<0x180f0000 0x100>, /* CTRL */
<0x14000000 0x1000>; /* CFG */
reg-names = "crp_base", "ctrl_base", "cfg_base";
- ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000 /* pci memory */
+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x02000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&intc2>;
interrupts = <1>;
status = "disabled";
};
+ gmac: gmac@18070000 {
+ compatible = "qca,qca9550-gmac";
+ reg = <0x18070000 0x14>;
+ };
+
wmac: wmac@18100000 {
compatible = "qca,qca9550-wmac";
reg = <0x18100000 0x10000>;
};
ð0 {
- compatible = "qca,qca9550-eth", "syscon";
+ compatible = "qca,qca9550-eth", "syscon", "simple-mfd";
+
+ pll-reg = <0 0x28 0>;
+ pll-handle = <&pll>;
- pll-data = <0x82000101 0x80000101 0x80001313>;
+ pll-data = <0x16000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
resets = <&rst 9>;
};
ð1 {
- compatible = "qca,qca9550-eth", "syscon";
+ compatible = "qca,qca9550-eth", "syscon", "simple-mfd";
+
+ pll-reg = <0 0x48 0>;
+ pll-handle = <&pll>;
- pll-data = <0x82000101 0x80000101 0x80001313>;
+ pll-data = <0x16000000 0x00000101 0x00001616>;
phy-mode = "sgmii";
resets = <&rst 13>;