include ./common-buffalo.mk
include ./common-netgear.mk
include ./common-tp-link.mk
+include ./common-yuncore.mk
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX
+DEVICE_VARS += DAP_SIGNATURE
define Build/add-elecom-factory-initramfs
$(eval edimax_model=$(word 1,$(1)))
-mv "$@.new" "$@"
endef
+define Build/append-md5sum-bin
+ $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
+ xargs echo -ne >> $@
+endef
+
define Build/cybertan-trx
@echo -n '' > $@-empty.bin
-$(STAGING_DIR_HOST)/bin/trx -o $@.new \
-rm $@-empty.bin
endef
+define Build/mkwrggimg
+ $(STAGING_DIR_HOST)/bin/mkwrggimg -b \
+ -i $@ -o $@.imghdr -d /dev/mtdblock/1 \
+ -m $(DEVICE_MODEL)-$(DEVICE_VARIANT) -s $(DAP_SIGNATURE) \
+ -v $(VERSION_DIST) -B $(REVISION)
+ mv $@.imghdr $@
+endef
+
define Build/nec-enc
$(STAGING_DIR_HOST)/bin/nec-enc \
-i $@ -o $@.new -k $(1)
rm -rf "$@.tmp"
endef
+define Build/teltonika-fw-fake-checksum
+ # Teltonika U-Boot web based firmware upgrade/recovery routine compares
+ # 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes
+ # from begin of the firmware file) with 16 bytes stored just before
+ # 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
+ let \
+ offs="$$(stat -c%s $@) - 20"; \
+ dd if=$@ bs=1 count=16 skip=76 |\
+ dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
+endef
+
+define Build/wrgg-pad-rootfs
+ $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
+endef
+
define Device/seama
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
KERNEL_INITRAMFS := $$(KERNEL) | seama
# - 28 bytes seama_header
# - 36 bytes of META data (4-bytes aligned)
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
- IMAGE/sysupgrade.bin := \
- $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := \
- $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
+ append-metadata | check-size
+ IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
+ seama-seal | check-size
SEAMA_SIGNATURE :=
endef
define Device/8dev_carambola2
- ATH_SOC := ar9331
+ SOC := ar9331
DEVICE_VENDOR := 8devices
DEVICE_MODEL := Carambola2
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
TARGET_DEVICES += 8dev_carambola2
define Device/adtran_bsap1880
- ATH_SOC := ar7161
+ SOC := ar7161
DEVICE_VENDOR := Adtran/Bluesocket
DEVICE_PACKAGES += -swconfig -uboot-envtools fconfig
- KERNEL := kernel-bin | append-dtb | lzma
+ KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
KERNEL_INITRAMFS := kernel-bin | append-dtb
IMAGE_SIZE := 11200k
IMAGES += kernel.bin rootfs.bin
- IMAGE/kernel.bin := append-kernel | pad-to $$$$(BLOCKSIZE)
+ IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
+ check-size | sysupgrade-tar rootfs=$$$$@ | append-metadata
endef
define Device/adtran_bsap1800-v2
TARGET_DEVICES += adtran_bsap1840
define Device/alfa-network_ap121f
- ATH_SOC := ar9331
+ SOC := ar9331
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AP121F
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 kmod-usb-storage -swconfig
TARGET_DEVICES += alfa-network_ap121f
define Device/aruba_ap-105
- ATH_SOC := ar7161
+ SOC := ar7161
DEVICE_VENDOR := Aruba
DEVICE_MODEL := AP-105
IMAGE_SIZE := 16000k
- DEVICE_PACKAGES := kmod-i2c-core kmod-i2c-gpio kmod-tpm-i2c-atmel
+ DEVICE_PACKAGES := kmod-i2c-gpio kmod-tpm-i2c-atmel
endef
TARGET_DEVICES += aruba_ap-105
-define Device/avm_fritz300e
- ATH_SOC := ar7242
+define Device/avm
DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!WLAN Repeater 300E
KERNEL := kernel-bin | append-dtb | lzma | eva-image
KERNEL_INITRAMFS := $$(KERNEL)
- IMAGE_SIZE := 15232k
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
- append-squashfs-fakeroot-be | pad-to 256 | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- DEVICE_PACKAGES := fritz-tffs rssileds -swconfig
+ append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
+ DEVICE_PACKAGES := fritz-tffs
+endef
+
+define Device/avm_fritz1750e
+ $(Device/avm)
+ SOC := qca9556
+ IMAGE_SIZE := 15232k
+ DEVICE_MODEL := FRITZ!WLAN Repeater 1750E
+ DEVICE_PACKAGES += rssileds kmod-ath10k-ct-smallbuffers \
+ ath10k-firmware-qca988x-ct -swconfig
+endef
+TARGET_DEVICES += avm_fritz1750e
+
+define Device/avm_fritz300e
+ $(Device/avm)
+ SOC := ar7242
+ IMAGE_SIZE := 15232k
+ DEVICE_MODEL := FRITZ!WLAN Repeater 300E
+ DEVICE_PACKAGES += rssileds -swconfig
+ SUPPORTED_DEVICES += fritz300e
endef
TARGET_DEVICES += avm_fritz300e
define Device/avm_fritz4020
- ATH_SOC := qca9561
- DEVICE_VENDOR := AVM
- DEVICE_MODEL := FRITZ!Box 4020
+ $(Device/avm)
+ SOC := qca9561
IMAGE_SIZE := 15232k
- KERNEL := kernel-bin | append-dtb | lzma | eva-image
- KERNEL_INITRAMFS := $$(KERNEL)
- IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
- append-squashfs-fakeroot-be | pad-to 256 | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- DEVICE_PACKAGES := fritz-tffs
+ DEVICE_MODEL := FRITZ!Box 4020
SUPPORTED_DEVICES += fritz4020
endef
TARGET_DEVICES += avm_fritz4020
+define Device/avm_fritz450e
+ $(Device/avm)
+ SOC := qca9556
+ IMAGE_SIZE := 15232k
+ DEVICE_MODEL := FRITZ!WLAN Repeater 450E
+ SUPPORTED_DEVICES += fritz450e
+endef
+TARGET_DEVICES += avm_fritz450e
+
+define Device/avm_fritzdvbc
+ $(Device/avm)
+ SOC := qca9556
+ IMAGE_SIZE := 15232k
+ DEVICE_MODEL := FRITZ!WLAN Repeater DVB-C
+ DEVICE_PACKAGES += rssileds kmod-ath10k-ct-smallbuffers \
+ ath10k-firmware-qca988x-ct -swconfig
+endef
+TARGET_DEVICES += avm_fritzdvbc
+
define Device/buffalo_bhr-4grv
- ATH_SOC := ar7242
+ SOC := ar7242
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := BHR-4GRV
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 32256k
IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | buffalo-tag BHR-4GRV 3
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs | check-size
+ IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | \
+ buffalo-tag BHR-4GRV 3
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += wzr-hp-g450h
endef
TARGET_DEVICES += buffalo_bhr-4grv
define Device/buffalo_bhr-4grv2
- ATH_SOC := qca9557
+ SOC := qca9557
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := BHR-4GRV2
IMAGE_SIZE := 16000k
TARGET_DEVICES += buffalo_bhr-4grv2
define Device/buffalo_wzr-hp-ag300h
- ATH_SOC := ar7161
+ SOC := ar7161
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WZR-HP-AG300H
- IMAGE_SIZE := 32256k
+ IMAGE_SIZE := 32320k
IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | buffalo-tag WZR-HP-AG300H 3
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs | check-size
+ IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | \
+ buffalo-tag WZR-HP-AG300H 3
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
+ DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
+ kmod-leds-reset kmod-owl-loader
SUPPORTED_DEVICES += wzr-hp-ag300h
endef
TARGET_DEVICES += buffalo_wzr-hp-ag300h
define Device/buffalo_wzr-hp-g302h-a1a0
- ATH_SOC := ar7242
+ SOC := ar7242
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WZR-HP-G302H
DEVICE_VARIANT := A1A0
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 32128k
IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G302H 1.99 | buffalo-tag WZR-HP-G302H 4
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs | check-size
+ IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G302H 1.99 | \
+ buffalo-tag WZR-HP-G302H 4
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += wzr-hp-g300nh2
endef
TARGET_DEVICES += buffalo_wzr-hp-g302h-a1a0
define Device/buffalo_wzr-hp-g450h
- ATH_SOC := ar7242
+ SOC := ar7242
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WZR-HP-G450H/WZR-450HP
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
IMAGE_SIZE := 32256k
IMAGES += factory.bin tftp.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | buffalo-tag WZR-HP-G450H 3
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs | check-size
+ IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | \
+ buffalo-tag WZR-HP-G450H 3
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
SUPPORTED_DEVICES += wzr-hp-g450h
endef
TARGET_DEVICES += buffalo_wzr-hp-g450h
define Device/comfast_cf-e110n-v2
- ATH_SOC := qca9533
+ SOC := qca9533
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-E110N
DEVICE_VARIANT := v2
TARGET_DEVICES += comfast_cf-e110n-v2
define Device/comfast_cf-e120a-v3
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-E120A
DEVICE_VARIANT := v3
endef
TARGET_DEVICES += comfast_cf-e120a-v3
+define Device/comfast_cf-e130n-v2
+ SOC := qca9531
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-E130N
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := rssileds kmod-leds-gpio -swconfig -uboot-envtools
+ IMAGE_SIZE := 7936k
+endef
+TARGET_DEVICES += comfast_cf-e130n-v2
+
+define Device/comfast_cf-e313ac
+ SOC := qca9531
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-E313AC
+ DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-ath10k-ct-smallbuffers \
+ ath10k-firmware-qca9888-ct -swconfig -uboot-envtools
+ IMAGE_SIZE := 7936k
+endef
+TARGET_DEVICES += comfast_cf-e313ac
+
define Device/comfast_cf-e314n-v2
- ATH_SOC := qca9531
+ SOC := qca9531
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-E314N
DEVICE_VARIANT := v2
TARGET_DEVICES += comfast_cf-e314n-v2
define Device/comfast_cf-e5
- ATH_SOC := qca9531
+ SOC := qca9531
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-E5/E7
- DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-usb-core kmod-usb2 kmod-usb-net \
+ DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-usb2 kmod-usb-net \
kmod-usb-net-qmi-wwan -swconfig -uboot-envtools
IMAGE_SIZE := 16192k
endef
TARGET_DEVICES += comfast_cf-e5
+define Device/comfast_cf-e560ac
+ SOC := qca9531
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-E560AC
+ DEVICE_PACKAGES := kmod-leds-gpio kmod-usb2 kmod-ath10k-ct \
+ ath10k-firmware-qca9888-ct
+ IMAGE_SIZE := 16128k
+endef
+TARGET_DEVICES += comfast_cf-e560ac
+
+define Device/comfast_cf-ew72
+ SOC := qca9531
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-EW72
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
+ -uboot-envtools -swconfig
+ IMAGE_SIZE := 16192k
+endef
+TARGET_DEVICES += comfast_cf-ew72
+
define Device/comfast_cf-wr650ac-v1
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-WR650AC
DEVICE_VARIANT := v1
TARGET_DEVICES += comfast_cf-wr650ac-v1
define Device/comfast_cf-wr650ac-v2
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := COMFAST
DEVICE_MODEL := CF-WR650AC
DEVICE_VARIANT := v2
endef
TARGET_DEVICES += comfast_cf-wr650ac-v2
+define Device/comfast_cf-wr752ac-v1
+ SOC := qca9531
+ DEVICE_VENDOR := COMFAST
+ DEVICE_MODEL := CF-WR752AC
+ DEVICE_VARIANT := v1
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
+ -uboot-envtools
+ IMAGE_SIZE := 16192k
+endef
+TARGET_DEVICES += comfast_cf-wr752ac-v1
+
+define Device/compex_wpj531-16m
+ SOC := qca9531
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 16128k
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := WPJ531
+ DEVICE_VARIANT := 16M
+ SUPPORTED_DEVICES += wpj531
+endef
+TARGET_DEVICES += compex_wpj531-16m
+
define Device/devolo_dvl1200e
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := devolo
DEVICE_MODEL := WiFi pro 1200e
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TARGET_DEVICES += devolo_dvl1200e
define Device/devolo_dvl1200i
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := devolo
DEVICE_MODEL := WiFi pro 1200i
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TARGET_DEVICES += devolo_dvl1200i
define Device/devolo_dvl1750c
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := devolo
DEVICE_MODEL := WiFi pro 1750c
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TARGET_DEVICES += devolo_dvl1750c
define Device/devolo_dvl1750e
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := devolo
DEVICE_MODEL := WiFi pro 1750e
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
TARGET_DEVICES += devolo_dvl1750e
define Device/devolo_dvl1750i
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := devolo
DEVICE_MODEL := WiFi pro 1750i
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
TARGET_DEVICES += devolo_dvl1750i
define Device/devolo_dvl1750x
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := devolo
DEVICE_MODEL := WiFi pro 1750x
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += devolo_dvl1750x
+define Device/devolo_magic-2-wifi
+ SOC := ar9344
+ DEVICE_VENDOR := Devolo
+ DEVICE_MODEL := Magic 2 WiFi
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 15872k
+endef
+TARGET_DEVICES += devolo_magic-2-wifi
+
+define Device/dlink_dap-2695-a1
+ SOC := qca9558
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-2965
+ DEVICE_VARIANT := A1
+ IMAGES := factory.img sysupgrade.bin
+ IMAGE_SIZE := 15360k
+ IMAGE/default := append-kernel | pad-offset 65536 160
+ IMAGE/factory.img := $$(IMAGE/default) | append-rootfs | wrgg-pad-rootfs | \
+ mkwrggimg | check-size
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | mkwrggimg | append-rootfs | \
+ wrgg-pad-rootfs | append-metadata | check-size
+ KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
+ KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
+ DAP_SIGNATURE := wapac02_dkbs_dap2695
+ SUPPORTED_DEVICES += dap-2695-a1
+endef
+TARGET_DEVICES += dlink_dap-2695-a1
+
+define Device/dlink_dir-505
+ SOC := ar9330
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DIR-505
+ IMAGE_SIZE := 7680k
+ DEVICE_PACKAGES := kmod-usb2
+ SUPPORTED_DEVICES += dir-505-a1
+endef
+TARGET_DEVICES += dlink_dir-505
+
define Device/dlink_dir-825-b1
- ATH_SOC := ar7161
+ SOC := ar7161
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-825
DEVICE_VARIANT := B1
IMAGE_SIZE := 6208k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
+ DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
+ kmod-leds-reset kmod-owl-loader
SUPPORTED_DEVICES += dir-825-b1
endef
TARGET_DEVICES += dlink_dir-825-b1
define Device/dlink_dir-825-c1
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-825
DEVICE_VARIANT := C1
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset \
+ kmod-owl-loader
SUPPORTED_DEVICES += dir-825-c1
IMAGE_SIZE := 15936k
IMAGES := factory.bin sysupgrade.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
- append-string 00DB120AR9344-RT-101214-00 | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+ append-string 00DB120AR9344-RT-101214-00 | check-size
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
+ check-size
endef
TARGET_DEVICES += dlink_dir-825-c1
define Device/dlink_dir-835-a1
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-835
DEVICE_VARIANT := A1
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-leds-reset kmod-owl-loader
+ DEVICE_PACKAGES := kmod-usb2 kmod-leds-reset kmod-owl-loader
SUPPORTED_DEVICES += dir-835-a1
IMAGE_SIZE := 15936k
IMAGES := factory.bin sysupgrade.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
- append-string 00DB120AR9344-RT-101214-00 | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+ append-string 00DB120AR9344-RT-101214-00 | check-size
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
+ check-size
endef
TARGET_DEVICES += dlink_dir-835-a1
define Device/dlink_dir-842-c
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-842
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
# 64 bytes offset:
# - 28 bytes seama_header
# - 36 bytes of META data (4-bytes aligned)
- IMAGE/default := append-kernel | uImage lzma | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
- IMAGE/sysupgrade.bin := \
- $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := \
- $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE)
+ IMAGE/default := append-kernel | uImage lzma | \
+ pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
+ append-metadata | check-size
+ IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
+ seama-seal | check-size
IMAGE_SIZE := 15680k
endef
define Device/dlink_dir-859-a1
$(Device/seama)
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DIR-859
DEVICE_VARIANT := A1
IMAGE_SIZE := 15872k
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859
- SUPPORTED_DEVICES += dir-859-a1
endef
TARGET_DEVICES += dlink_dir-859-a1
define Device/elecom_wrc-1750ghbk2-i
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-1750GHBK2-I/C
IMAGE_SIZE := 15808k
TARGET_DEVICES += elecom_wrc-1750ghbk2-i
define Device/elecom_wrc-300ghbk2-i
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-300GHBK2-I
IMAGE_SIZE := 7616k
TARGET_DEVICES += elecom_wrc-300ghbk2-i
define Device/embeddedwireless_dorin
- ATH_SOC := ar9331
+ SOC := ar9331
DEVICE_VENDOR := Embedded Wireless
DEVICE_MODEL := Dorin
DEVICE_PACKAGES := kmod-usb-chipidea2
TARGET_DEVICES += embeddedwireless_dorin
define Device/engenius_ecb1750
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ECB1750
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
IMAGE_SIZE := 15680k
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
- senao-header -r 0x101 -p 0x6d -t 2
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x101 -p 0x6d -t 2
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
endef
TARGET_DEVICES += engenius_ecb1750
define Device/engenius_epg5000
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EPG5000
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
IMAGE_SIZE := 14656k
IMAGES += factory.dlf
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
+ append-rootfs | pad-rootfs | check-size | \
senao-header -r 0x101 -p 0x71 -t 2
SUPPORTED_DEVICES += epg5000
endef
TARGET_DEVICES += engenius_epg5000
define Device/engenius_ews511ap
- ATH_SOC := qca9531
+ SOC := qca9531
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EWS511AP
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
endef
TARGET_DEVICES += engenius_ews511ap
+define Device/enterasys_ws-ap3705i
+ SOC := ar9344
+ DEVICE_VENDOR := Enterasys
+ DEVICE_MODEL := WS-AP3705i
+ IMAGE_SIZE := 30528k
+endef
+TARGET_DEVICES += enterasys_ws-ap3705i
+
define Device/etactica_eg200
- ATH_SOC := ar9331
+ SOC := ar9331
DEVICE_VENDOR := eTactica
DEVICE_MODEL := EG200
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
- kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
+ kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += rme-eg200
endef
TARGET_DEVICES += etactica_eg200
+define Device/glinet_6408
+ $(Device/tplink-8mlzma)
+ SOC := ar9331
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := 6408
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 8000k
+ TPLINK_HWID := 0x08000001
+ IMAGES := sysupgrade.bin
+ SUPPORTED_DEVICES += gl-inet
+endef
+TARGET_DEVICES += glinet_6408
+
+define Device/glinet_6416
+ $(Device/tplink-16mlzma)
+ SOC := ar9331
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := 6416
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 16192k
+ TPLINK_HWID := 0x08000001
+ IMAGES := sysupgrade.bin
+ SUPPORTED_DEVICES += gl-inet
+endef
+TARGET_DEVICES += glinet_6416
+
define Device/glinet_gl-ar150
- ATH_SOC := ar9330
+ SOC := ar9330
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-AR150
DEVICE_PACKAGES := kmod-usb-chipidea2
TARGET_DEVICES += glinet_gl-ar150
define Device/glinet_gl-ar300m-common-nor
- ATH_SOC := qca9531
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_PACKAGES := kmod-usb2
IMAGE_SIZE := 16000k
SUPPORTED_DEVICES += gl-ar300m
endef
define Device/glinet_gl-ar300m-lite
$(Device/glinet_gl-ar300m-common-nor)
- DEVICE_VENDOR := GL.iNet
- DEVICE_MODEL := GL-AR300M-Lite
+ DEVICE_MODEL := GL-AR300M
+ DEVICE_VARIANT := Lite
endef
TARGET_DEVICES += glinet_gl-ar300m-lite
-define Device/glinet_gl-ar300m-nor
+define Device/glinet_gl-ar300m16
$(Device/glinet_gl-ar300m-common-nor)
- DEVICE_VENDOR := GL.iNet
- DEVICE_MODEL := GL-AR300M
+ DEVICE_MODEL := GL-AR300M16
endef
-TARGET_DEVICES += glinet_gl-ar300m-nor
+TARGET_DEVICES += glinet_gl-ar300m16
define Device/glinet_gl-ar750
- ATH_SOC := qca9531
+ SOC := qca9531
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-AR750
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
endef
TARGET_DEVICES += glinet_gl-ar750
-define Device/glinet_gl-ar750s
- ATH_SOC := qca9563
- DEVICE_VENDOR := GL.iNet
- DEVICE_MODEL := GL-AR750S
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct block-mount
- IMAGE_SIZE := 16000k
- SUPPORTED_DEVICES += gl-ar750s
-endef
-TARGET_DEVICES += glinet_gl-ar750s
-
define Device/glinet_gl-x750
- ATH_SOC := qca9531
+ SOC := qca9531
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-X750
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
IMAGE_SIZE := 16000k
endef
TARGET_DEVICES += glinet_gl-x750
define Device/iodata_etg3-r
- ATH_SOC := ar9342
+ SOC := ar9342
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := ETG3-R
IMAGE_SIZE := 7680k
TARGET_DEVICES += iodata_etg3-r
define Device/iodata_wn-ac1167dgr
- ATH_SOC := qca9557
+ SOC := qca9557
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AC1167DGR
IMAGE_SIZE := 14656k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
- senao-header -r 0x30a -p 0x61 -t 2
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x30a -p 0x61 -t 2
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += iodata_wn-ac1167dgr
define Device/iodata_wn-ac1600dgr
- ATH_SOC := qca9557
+ SOC := qca9557
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AC1600DGR
IMAGE_SIZE := 14656k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
- senao-header -r 0x30a -p 0x60 -t 2 -v 200
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x30a -p 0x60 -t 2 -v 200
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += iodata_wn-ac1600dgr
define Device/iodata_wn-ac1600dgr2
- ATH_SOC := qca9557
+ SOC := qca9557
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AC1600DGR2/DGR3
IMAGE_SIZE := 14656k
IMAGES += dgr2-dgr3-factory.bin
- IMAGE/dgr2-dgr3-factory.bin := \
- append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
- senao-header -r 0x30a -p 0x60 -t 2 -v 200
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE/dgr2-dgr3-factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x30a -p 0x60 -t 2 -v 200
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
endef
TARGET_DEVICES += iodata_wn-ac1600dgr2
define Device/iodata_wn-ag300dgr
- ATH_SOC := ar1022
+ SOC := ar1022
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-AG300DGR
IMAGE_SIZE := 15424k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
- senao-header -r 0x30a -p 0x47 -t 2
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x30a -p 0x47 -t 2
+ DEVICE_PACKAGES := kmod-usb2
endef
TARGET_DEVICES += iodata_wn-ag300dgr
define Device/jjplus_ja76pf2
- ATH_SOC := ar7161
+ SOC := ar7161
DEVICE_VENDOR := jjPlus
DEVICE_MODEL := JA76PF2
DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-mini -uboot-envtools fconfig
TARGET_DEVICES += jjplus_ja76pf2
define Device/librerouter_librerouter-v1
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := Librerouter
DEVICE_MODEL := LibreRouter
DEVICE_VARIANT := v1
IMAGE_SIZE := 7936k
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ DEVICE_PACKAGES := kmod-usb2
endef
TARGET_DEVICES += librerouter_librerouter-v1
define Device/nec_wg1200cr
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := NEC
DEVICE_MODEL := Aterm WG1200CR
IMAGE_SIZE := 7616k
SEAMA_MTDBLOCK := 6
SEAMA_SIGNATURE := wrgac72_necpf.2016gui_wg1200cr
IMAGES += factory.bin
- IMAGE/default := \
- append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
- IMAGE/sysupgrade.bin := \
- $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := \
- $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | nec-enc 9gsiy9nzep452pad | \
- check-size $$$$(IMAGE_SIZE)
+ IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
+ append-metadata | check-size
+ IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
+ seama-seal | nec-enc 9gsiy9nzep452pad | check-size
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += nec_wg1200cr
define Device/nec_wg800hp
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := NEC
DEVICE_MODEL := Aterm WG800HP
IMAGE_SIZE := 7104k
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
- xor-image -p 6A57190601121E4C004C1E1201061957 -x | \
- nec-fw LASER_ATERM
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct-htt
+ append-rootfs | pad-rootfs | check-size | \
+ xor-image -p 6A57190601121E4C004C1E1201061957 -x | nec-fw LASER_ATERM
+ DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct-full-htt
endef
TARGET_DEVICES += nec_wg800hp
define Device/netgear_ex6400_ex7300
- ATH_SOC := qca9558
+ SOC := qca9558
NETGEAR_KERNEL_MAGIC := 0x27051956
NETGEAR_BOARD_ID := EX7300series
NETGEAR_HW_ID := 29765104+16+0+128
IMAGE_SIZE := 15552k
- IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | netgear-rootfs | pad-rootfs
+ IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
+ netgear-rootfs | pad-rootfs
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca99x0-ct
$(Device/netgear_ath79)
endef
TARGET_DEVICES += netgear_ex7300
define Device/netgear_wndr3x00
- ATH_SOC := ar7161
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
- DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
+ SOC := ar7161
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | \
+ append-rootfs | pad-rootfs
+ DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
+ kmod-leds-reset kmod-owl-loader
$(Device/netgear_ath79)
endef
NETGEAR_BOARD_ID := WNDR3700
IMAGE_SIZE := 7680k
IMAGES += factory-NA.img
- IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \
+ check-size
SUPPORTED_DEVICES += wndr3700
endef
TARGET_DEVICES += netgear_wndr3700
-define Device/netgear_wndr3700v2
+define Device/netgear_wndr3700-v2
$(Device/netgear_wndr3x00)
DEVICE_MODEL := WNDR3700
DEVICE_VARIANT := v2
NETGEAR_BOARD_ID := WNDR3700v2
NETGEAR_HW_ID := 29763654+16+64
IMAGE_SIZE := 15872k
- SUPPORTED_DEVICES += wndr3700v2
+ SUPPORTED_DEVICES += wndr3700 netgear,wndr3700v2
endef
-TARGET_DEVICES += netgear_wndr3700v2
+TARGET_DEVICES += netgear_wndr3700-v2
define Device/netgear_wndr3800
$(Device/netgear_wndr3x00)
NETGEAR_BOARD_ID := WNDR3800
NETGEAR_HW_ID := 29763654+16+128
IMAGE_SIZE := 15872k
- SUPPORTED_DEVICES += wndr3800
+ SUPPORTED_DEVICES += wndr3700
endef
TARGET_DEVICES += netgear_wndr3800
+define Device/netgear_wndr3800ch
+ $(Device/netgear_wndr3x00)
+ DEVICE_MODEL := WNDR3800CH
+ NETGEAR_KERNEL_MAGIC := 0x33373031
+ NETGEAR_BOARD_ID := WNDR3800CH
+ NETGEAR_HW_ID := 29763654+16+128
+ IMAGE_SIZE := 15872k
+ SUPPORTED_DEVICES += wndr3700
+endef
+TARGET_DEVICES += netgear_wndr3800ch
+
+define Device/netgear_wndrmac-v1
+ $(Device/netgear_wndr3x00)
+ DEVICE_MODEL := WNDRMAC
+ DEVICE_VARIANT := v1
+ NETGEAR_KERNEL_MAGIC := 0x33373031
+ NETGEAR_BOARD_ID := WNDRMAC
+ NETGEAR_HW_ID := 29763654+16+64
+ IMAGE_SIZE := 15872k
+ SUPPORTED_DEVICES += wndr3700
+endef
+TARGET_DEVICES += netgear_wndrmac-v1
+
+define Device/netgear_wndrmac-v2
+ $(Device/netgear_wndr3x00)
+ DEVICE_MODEL := WNDRMAC
+ DEVICE_VARIANT := v2
+ NETGEAR_KERNEL_MAGIC := 0x33373031
+ NETGEAR_BOARD_ID := WNDRMACv2
+ NETGEAR_HW_ID := 29763654+16+128
+ IMAGE_SIZE := 15872k
+ SUPPORTED_DEVICES += wndr3700
+endef
+TARGET_DEVICES += netgear_wndrmac-v2
+
+define Device/netgear_wnr2200_common
+ SOC := ar7241
+ DEVICE_MODEL := WNR2200
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
+ NETGEAR_KERNEL_MAGIC := 0x32323030
+ NETGEAR_BOARD_ID := wnr2200
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | \
+ append-rootfs | pad-rootfs
+ $(Device/netgear_ath79)
+endef
+
+define Device/netgear_wnr2200-8m
+ $(Device/netgear_wnr2200_common)
+ DEVICE_VARIANT := 8M
+ NETGEAR_HW_ID := 29763600+08+64
+ IMAGE_SIZE := 7808k
+ IMAGES += factory-NA.img
+ IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \
+ check-size
+ SUPPORTED_DEVICES += wnr2200
+endef
+TARGET_DEVICES += netgear_wnr2200-8m
+
+define Device/netgear_wnr2200-16m
+ $(Device/netgear_wnr2200_common)
+ DEVICE_VARIANT := 16M
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := WNR2200
+ DEVICE_ALT0_VARIANT := CN/RU
+ NETGEAR_HW_ID :=
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += netgear_wnr2200-16m
+
define Device/ocedo_koala
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := Ocedo
DEVICE_MODEL := Koala
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
SUPPORTED_DEVICES += koala
IMAGE_SIZE := 7424k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
endef
TARGET_DEVICES += ocedo_koala
define Device/ocedo_raccoon
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := Ocedo
DEVICE_MODEL := Raccoon
IMAGE_SIZE := 7424k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
endef
TARGET_DEVICES += ocedo_raccoon
define Device/ocedo_ursus
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := Ocedo
DEVICE_MODEL := Ursus
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
IMAGE_SIZE := 7424k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
endef
TARGET_DEVICES += ocedo_ursus
define Device/openmesh_om5p-ac-v2
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := OpenMesh
DEVICE_MODEL := OM5P-AC
DEVICE_VARIANT := v2
TARGET_DEVICES += openmesh_om5p-ac-v2
define Device/pcs_cap324
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := PowerCloud Systems
DEVICE_MODEL := CAP324
IMAGE_SIZE := 16000k
TARGET_DEVICES += pcs_cap324
define Device/pcs_cr3000
- ATH_SOC := ar9341
+ SOC := ar9341
DEVICE_VENDOR := PowerCloud Systems
DEVICE_MODEL := CR3000
IMAGE_SIZE := 7808k
TARGET_DEVICES += pcs_cr3000
define Device/pcs_cr5000
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := PowerCloud Systems
DEVICE_MODEL := CR5000
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-core
+ DEVICE_PACKAGES := kmod-usb2
IMAGE_SIZE := 7808k
SUPPORTED_DEVICES += cr5000
endef
TARGET_DEVICES += pcs_cr5000
define Device/phicomm_k2t
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := Phicomm
DEVICE_MODEL := K2T
IMAGE_SIZE := 15744k
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k-ct ath10k-firmware-qca9888-ct
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+ append-metadata | check-size
+ DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += phicomm_k2t
define Device/pisen_ts-d084
$(Device/tplink-8mlzma)
- ATH_SOC := ar9331
+ SOC := ar9331
DEVICE_VENDOR := PISEN
DEVICE_MODEL := TS-D084
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-chipidea2
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
TPLINK_HWID := 0x07030101
endef
TARGET_DEVICES += pisen_ts-d084
define Device/pisen_wmb001n
- ATH_SOC := ar9341
+ SOC := ar9341
DEVICE_VENDOR := PISEN
DEVICE_MODEL := WMB001N
IMAGE_SIZE := 14080k
- DEVICE_PACKAGES := kmod-i2c-core kmod-i2c-gpio kmod-usb2
+ DEVICE_PACKAGES := kmod-i2c-gpio kmod-usb2
LOADER_TYPE := bin
LOADER_FLASH_OFFS := 0x20000
COMPILE := loader-$(1).bin loader-$(1).uImage
COMPILE/loader-$(1).bin := loader-okli-compile
- COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | uImage lzma
+ COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
+ uImage lzma
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
IMAGES += factory.bin
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pisen_wmb001n-factory $(1)
define Device/pisen_wmm003n
$(Device/tplink-8mlzma)
- ATH_SOC := ar9331
+ SOC := ar9331
DEVICE_VENDOR := PISEN
DEVICE_MODEL := Cloud Easy Power (WMM003N)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-chipidea2
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
TPLINK_HWID := 0x07030101
endef
TARGET_DEVICES += pisen_wmm003n
define Device/qihoo_c301
$(Device/seama)
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := Qihoo
DEVICE_MODEL := C301
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct uboot-envtools
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \
+ uboot-envtools
IMAGE_SIZE := 15744k
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
SUPPORTED_DEVICES += qihoo-c301
TARGET_DEVICES += qihoo_c301
define Device/rosinson_wr818
- ATH_SOC := qca9563
+ SOC := qca9563
DEVICE_VENDOR := Rosinson
DEVICE_MODEL := WR818
IMAGE_SIZE := 15872k
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += rosinson_wr818
+define Device/siemens_ws-ap3610
+ SOC := ar7161
+ DEVICE_VENDOR := Siemens
+ DEVICE_MODEL := WS-AP3610
+ IMAGE_SIZE := 14336k
+ BLOCKSIZE := 256k
+ LOADER_TYPE := bin
+ LOADER_FLASH_OFFS := 0x82000
+ COMPILE := loader-$(1).bin
+ COMPILE/loader-$(1).bin := loader-okli-compile
+ KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
+endef
+TARGET_DEVICES += siemens_ws-ap3610
+
+define Device/sitecom_wlr-7100
+ SOC := ar1022
+ DEVICE_VENDOR := Sitecom
+ DEVICE_MODEL := WLR-7100
+ DEVICE_VARIANT := v1 002
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers kmod-usb2
+ IMAGES += factory.dlf
+ IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x222 -p 0x53 -t 2
+ IMAGE_SIZE := 7488k
+endef
+TARGET_DEVICES += sitecom_wlr-7100
+
+define Device/sitecom_wlr-8100
+ SOC := qca9558
+ DEVICE_VENDOR := Sitecom
+ DEVICE_MODEL := WLR-8100
+ DEVICE_ALT0_VENDOR := Sitecom
+ DEVICE_ALT0_MODEL := X8 AC1750
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2 kmod-usb3
+ SUPPORTED_DEVICES += wlr8100
+ IMAGES += factory.dlf
+ IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+ append-rootfs | pad-rootfs | check-size | \
+ senao-header -r 0x222 -p 0x56 -t 2
+ IMAGE_SIZE := 15424k
+endef
+TARGET_DEVICES += sitecom_wlr-8100
+
+define Device/teltonika_rut955
+ SOC := ar9344
+ DEVICE_VENDOR := Teltonika
+ DEVICE_MODEL := RUT955
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-acm kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option kmod-hwmon-mcp3021 uqmi -uboot-envtools
+ IMAGE_SIZE := 15552k
+ TPLINK_HWID := 0x35000001
+ TPLINK_HWREV := 0x1
+ TPLINK_HEADER_VERSION := 1
+ KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
+ pad-rootfs | teltonika-fw-fake-checksum | append-string master |\
+ append-md5sum-bin | check-size
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata |\
+ check-size
+endef
+TARGET_DEVICES += teltonika_rut955
+
+define Device/teltonika_rut955-h7v3c0
+ $(Device/teltonika_rut955)
+ DEVICE_VARIANT := H7V3C0
+endef
+TARGET_DEVICES += teltonika_rut955-h7v3c0
+
define Device/trendnet_tew-823dru
- ATH_SOC := qca9558
+ SOC := qca9558
DEVICE_VENDOR := Trendnet
DEVICE_MODEL := TEW-823DRU
DEVICE_VARIANT := v1.0R
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
SUPPORTED_DEVICES += tew-823dru
IMAGE_SIZE := 15296k
IMAGES := factory.bin sysupgrade.bin
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
- append-string 00AP135AR9558-RT-131129-00 | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+ append-string 00AP135AR9558-RT-131129-00 | check-size
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
+ check-size
endef
TARGET_DEVICES += trendnet_tew-823dru
define Device/wd_mynet-n750
$(Device/seama)
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := Western Digital
DEVICE_MODEL := My Net N750
IMAGE_SIZE := 15872k
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+ DEVICE_PACKAGES := kmod-usb2
SEAMA_SIGNATURE := wrgnd13_wd_av
SUPPORTED_DEVICES += mynet-n750
endef
TARGET_DEVICES += wd_mynet-n750
define Device/wd_mynet-wifi-rangeextender
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := Western Digital
DEVICE_MODEL := My Net Wi-Fi Range Extender
DEVICE_PACKAGES := rssileds nvram -swconfig
TARGET_DEVICES += wd_mynet-wifi-rangeextender
define Device/winchannel_wb2000
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := Winchannel
DEVICE_MODEL := WB2000
IMAGE_SIZE := 15872k
- DEVICE_PACKAGES := kmod-i2c-core kmod-i2c-gpio kmod-rtc-ds1307 kmod-usb2 kmod-usb-ledtrig-usbport
+ DEVICE_PACKAGES := kmod-i2c-gpio kmod-rtc-ds1307 kmod-usb2 \
+ kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += winchannel_wb2000
define Device/xiaomi_mi-router-4q
- ATH_SOC := qca9561
+ SOC := qca9561
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router 4Q
IMAGE_SIZE := 14336k
TARGET_DEVICES += xiaomi_mi-router-4q
define Device/yuncore_a770
- ATH_SOC := qca9531
+ SOC := qca9531
DEVICE_VENDOR := YunCore
DEVICE_MODEL := A770
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
IMAGE_SIZE := 16000k
+ IMAGES += tftp.bin
+ IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
endef
TARGET_DEVICES += yuncore_a770
+define Device/yuncore_a782
+ SOC := qca9563
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := A782
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+ IMAGE_SIZE := 16000k
+ IMAGES += tftp.bin
+ IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
+endef
+TARGET_DEVICES += yuncore_a782
+
+define Device/yuncore_xd4200
+ SOC := qca9563
+ DEVICE_VENDOR := YunCore
+ DEVICE_MODEL := XD4200
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+ IMAGE_SIZE := 16000k
+ IMAGES += tftp.bin
+ IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
+endef
+TARGET_DEVICES += yuncore_xd4200
+
define Device/zbtlink_zbt-wd323
- ATH_SOC := ar9344
+ SOC := ar9344
DEVICE_VENDOR := ZBT
DEVICE_MODEL := WD323
IMAGE_SIZE := 16000k
- DEVICE_PACKAGES := kmod-usb2 kmod-i2c-core kmod-i2c-gpio kmod-rtc-pcf8563 \
- kmod-usb-serial kmod-usb-serial-cp210x uqmi
+ DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio kmod-rtc-pcf8563 \
+ kmod-usb-serial kmod-usb-serial-cp210x uqmi
endef
TARGET_DEVICES += zbtlink_zbt-wd323
projects / openwrt / staging / dedeckeh.git / blobdiff