[ -n "$mtd" ] || \
ath10kcal_die "no mtd device found for partition $part"
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+ dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $mtd"
}
[ -n "$ubi" ] || \
ath10kcal_die "no UBI volume found for $part"
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+ dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
ath10kcal_die "failed to extract from $ubi"
}
-ath10kcal_patch_mac() {
- local mac=$1
-
- [ -z "$mac" ] && return
-
- macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
-}
-
ath10kcal_patch_mac_crc() {
local mac=$1
local mac_offset=6
local xor_fw_mac
local xor_fw_chksum
+ [ -z "$mac" ] && return
+
xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
- ath10kcal_patch_mac "$mac" && {
- xor_mac=${mac//:/}
- xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+ macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+
+ xor_mac=${mac//:/}
+ xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
- xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
- xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+ xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+ xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
- printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
- dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
- }
+ printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+ dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=$chksum_offset count=2
}
ath10kcal_is_caldata_valid() {
board=$(board_name)
-
case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case "$board" in
meraki,mr33)
ath10kcal_ubi_extract "ART" 36864 2116
ath10kcal_is_caldata_valid "4408" || ath10kcal_extract "ART" 36864 2116
- ath10kcal_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
+ ath10kcal_patch_mac_crc $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 102) +1)
;;
esac
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case "$board" in
+ asus,map-ac2200)
+ ath10kcal_ubi_extract "Factory" 36864 12064
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ linksys,ea8300)
+ ath10kcal_extract "ART" 36864 12064
+ # OEM assigns 4 sequential MACs
+ ath10kcal_patch_mac_crc $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+ ;;
openmesh,a62)
ath10kcal_extract "0:ART" 36864 12064
;;
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
8dev,jalapeno |\
+ alfa-network,ap120c-ac |\
glinet,gl-b1300 |\
+ linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 4096 12064
;;
+ asus,map-ac2200)
+ ath10kcal_ubi_extract "Factory" 4096 12064
+ ;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
ath10kcal_ubi_extract "Factory" 4096 12064
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ avm,fritzbox-7530 |\
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ compex,wpj428 |\
+ engenius,eap1300 |\
+ openmesh,a42 |\
+ openmesh,a62 |\
+ qxwlan,e2600ac-c1 |\
+ qxwlan,e2600ac-c2)
+ ath10kcal_extract "0:ART" 4096 12064
+ ;;
+ engenius,ens620ext)
+ ath10kcal_extract "ART" 4096 12064
+ ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+ ;;
+ linksys,ea8300)
+ ath10kcal_extract "ART" 4096 12064
+ ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+ ;;
meraki,mr33)
ath10kcal_ubi_extract "ART" 4096 12064
ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 4096 12064
ath10kcal_extract "ART" 4096 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 0)
;;
- compex,wpj428 |\
- openmesh,a42 |\
- openmesh,a62)
- ath10kcal_extract "0:ART" 4096 12064
- ;;
zyxel,nbg6617 |\
zyxel,wre6606)
ath10kcal_extract "ART" 4096 12064
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
8dev,jalapeno |\
+ alfa-network,ap120c-ac |\
glinet,gl-b1300 |\
+ linksys,ea6350v3 |\
qcom,ap-dk01.1-c1)
ath10kcal_extract "ART" 20480 12064
;;
+ asus,map-ac2200)
+ ath10kcal_ubi_extract "Factory" 20480 12064
+ ;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
ath10kcal_ubi_extract "Factory" 20480 12064
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
+ avm,fritzbox-7530 |\
+ avm,fritzrepeater-3000)
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+ /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+ ;;
+ compex,wpj428 |\
+ engenius,eap1300 |\
+ openmesh,a42 |\
+ openmesh,a62 |\
+ qxwlan,e2600ac-c1 |\
+ qxwlan,e2600ac-c2)
+ ath10kcal_extract "0:ART" 20480 12064
+ ;;
+ engenius,ens620ext)
+ ath10kcal_extract "ART" 20480 12064
+ ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+ ;;
+ linksys,ea8300)
+ ath10kcal_extract "ART" 20480 12064
+ ath10kcal_patch_mac_crc $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+ ;;
meraki,mr33)
ath10kcal_ubi_extract "ART" 20480 12064
ath10kcal_is_caldata_valid "202f" || ath10kcal_extract "ART" 20480 12064
ath10kcal_extract "ART" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_binary dnidata 12)
;;
- compex,wpj428 |\
- openmesh,a42 |\
- openmesh,a62)
- ath10kcal_extract "0:ART" 20480 12064
- ;;
zyxel,nbg6617 |\
zyxel,wre6606)
ath10kcal_extract "ART" 20480 12064