X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fdedeckeh.git;a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fimage%2Fconfig.txt;h=e80d9801cce5ff3d85f1a38179c2911afbe72407;hp=9e6e8e96f2347f2a29ef66bbe53328a08a6455aa;hb=3fc661a98c8046a27dcf45a63049ee6605ebd364;hpb=c40f94b0d0147836f1097d0ce3615bcae7f67f74

diff --git a/target/linux/brcm2708/image/config.txt b/target/linux/brcm2708/image/config.txt
index 9e6e8e96f2..e80d9801cc 100644
--- a/target/linux/brcm2708/image/config.txt
+++ b/target/linux/brcm2708/image/config.txt
@@ -476,7 +476,14 @@
 ##     Stop start.elf from filling in ATAGS (memory from 0x100) before
 ##     launching kernel
 ##
-disable_commandline_tags=1
+#disable_commandline_tags=2
+
+## enable_uart
+##     Enables or disables uart pin multiplexing
+##     Raspberry Pi 1/2: if unset, uart is enabled by default
+##     Raspberry Pi 3: if unset uart is disabled by default
+##
+enable_uart=1
 
 ## cmdline (string)
 ##     Command line parameters. Can be used instead of cmdline.txt file
@@ -491,7 +498,7 @@ disable_commandline_tags=1
 ## kernel_address
 ##     Address to load kernel.img file at
 ##
-kernel_address=0x8000
+#kernel_address=0x8000
 
 ## ramfsfile (string)
 ##     ramfs file to load
@@ -515,21 +522,21 @@ kernel_address=0x8000
 ## device_tree_address
 ##     Address to load device_tree at
 ##
-device_tree_address=0x100
+#device_tree_address=0x100
 
 ## init_uart_baud
 ##     Initial uart baud rate.
 ##
 ##     Default 115200
 ##
-init_uart_baud=115200
+#init_uart_baud=115200
 
 ## init_uart_clock
 ##     Initial uart clock.
 ##
 ##     Default 3000000 (3MHz)
 ##
-init_uart_clock=3000000
+#init_uart_clock=3000000
 
 ## init_emmc_clock
 ##     Initial emmc clock, increasing this can speedup your SD-card.
@@ -921,3 +928,24 @@ init_uart_clock=3000000
 ##     8        1.4   V
 ##
 #over_voltage_sdram_p=0
+
+################################################################################
+##  Device Tree Settings
+################################################################################
+
+dtparam=random=on,watchdog=on,audio=on,i2c0=on,i2c1=on,spi=on
+
+#dtoverlay=adau1977-adc
+#dtoverlay=audioinjector-wm8731-audio
+#dtoverlay=hifiberry-amp
+#dtoverlay=hifiberry-dac
+#dtoverlay=hifiberry-dacplus
+#dtoverlay=hifiberry-digi
+#dtoverlay=iqaudio-dac
+#dtoverlay=iqaudio-dacplus
+#dtoverlay=justboom-dac
+#dtoverlay=justboom-digi
+#dtoverlay=raspidac3
+#dtoverlay=rpi-dac
+#dtoverlay=rpi-proto
+#dtoverlay=rra-digidac1-wm8741-audio