ar71xx: GL.iNet AR300M family: correct LED definitions

remove USB as this is no LED but power control
rename WiFi LED with correct color red (like in stock firmware)
set middle LED to be used for LAN link/activity

Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 170adaa7a22d1476cc269574f2b8b0c226a350f5..183495e57fe9c8fc6fda9e462b0ef5b193413d46 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -412,6 +412,7 @@ fritz450e)
        ;;
 gl-ar300m)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
+       ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
        ;;
 gl-ar750)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt"

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
index 2a2d2702bcc699f481d1e3595f29349a70fc8d6d..d10a91012926280391e0907df531a01e8073c00f 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
@@ -29,7 +29,6 @@
 #include "machtypes.h"
 #include "pci.h"
 
-#define GL_AR300M_GPIO_LED_USB         2
 #define GL_AR300M_GPIO_LED_WLAN                14
 #define GL_AR300M_GPIO_LED_LAN         13
 #define GL_AR300M_GPIO_LED_SYSTEM      12
@@ -47,13 +46,7 @@
 
 static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
        {
-               .name = "gl-ar300m:green:usb",
-               .gpio = GL_AR300M_GPIO_LED_USB,
-               .active_low = 0,
-               .default_state = 1,
-       },
-       {
-               .name = "gl-ar300m:green:wlan",
+               .name = "gl-ar300m:red:wlan",
                .gpio = GL_AR300M_GPIO_LED_WLAN,
                .active_low = 1,
        },