ramips: Added Onion Omega2 and Omega2+
authorLazar Demin <lazar@onion.io>
Mon, 9 Jan 2017 19:59:56 +0000 (19:59 +0000)
committerJohn Crispin <john@phrozen.org>
Sun, 15 Jan 2017 16:43:14 +0000 (17:43 +0100)
This patch adds support for the Onion Omega2 and Omega2+ (https://onion.io)

Specifications:
- SoC: MediaTek MT7688AN (580MHz, ramips)
- Omega2
  - RAM: 64MB DDR
  - Storage: 16MB NOR SPI flash onboard
- Omega2+
  - RAM: 128MB DDR
  - Storage: 32MB NOR SPI flash onboard + microSD slot
- Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter
- Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port
- Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock)
  - All Docks Provide:
    - Micro-USB port to provide power to the Omega
      - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial
    - USB 2.0 socket connected to Omega
  - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide:
    - Omega GPIO breakout
    - Allows for connection of Omega Expansions:
      - Ethernet Expansion
      - Relay Expansion
      - PWM Expansion
      - OLED Expansion
      - Ethernet Expansion
      - Proto Expansion
      - Cellular Expansion

Signed-off-by: Lazar Demin <lazar@onion.io>
target/linux/ramips/base-files/etc/board.d/02_network
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/base-files/lib/upgrade/platform.sh
target/linux/ramips/dts/OMEGA2.dts [new file with mode: 0644]
target/linux/ramips/dts/OMEGA2.dtsi [new file with mode: 0644]
target/linux/ramips/dts/OMEGA2P.dts [new file with mode: 0644]
target/linux/ramips/image/mt7688.mk

index e84a52d..baf619f 100755 (executable)
@@ -53,6 +53,8 @@ ramips_setup_interfaces()
        microwrt|\
        mpr-a2|\
        ncs601w|\
+       omega2 | \
+       omega2p | \
        timecloud|\
        w150m|\
        widora-neo|\
@@ -366,6 +368,11 @@ ramips_setup_macs()
                lan_mac=$(cat /sys/class/net/eth0/address)
                lan_mac=$(macaddr_add "$lan_mac" 2)
                ;;
+       omega2|\
+       omega2p)
+               wan_mac=$(mtd_get_mac_binary factory 4)
+               lan_mac=$(mtd_get_mac_binary factory 46)
+               ;;
        oy-0001)
                lan_mac=$(mtd_get_mac_binary factory 40)
                wan_mac=$(mtd_get_mac_binary factory 46)
index 0b5bfeb..5367e65 100644 (file)
@@ -172,6 +172,10 @@ get_status_led() {
        newifi-d1)
                status_led="$board:blue:status"
                ;;
+       omega2| \
+       omega2p)
+               status_led="$board:amber:system"
+               ;;
        oy-0001|\
        sl-r7205|\
        zbt-we826)
index 895f3ae..6afe709 100755 (executable)
@@ -364,6 +364,12 @@ ramips_board_detect() {
        *"NW718")
                name="nw718"
                ;;
+       *"Onion Omega2")
+               name="omega2"
+               ;;
+       *"Onion Omega2+")
+               name="omega2p"
+               ;;
        *"OY-0001")
                name="oy-0001"
                ;;
index ce2c222..0f2510c 100755 (executable)
@@ -102,6 +102,8 @@ platform_check_image() {
        newifi-d1|\
        nixcore|\
        nw718|\
+       omega2|\
+       omega2p|\
        oy-0001|\
        pbr-d1|\
        pbr-m1|\
diff --git a/target/linux/ramips/dts/OMEGA2.dts b/target/linux/ramips/dts/OMEGA2.dts
new file mode 100644 (file)
index 0000000..f419dc9
--- /dev/null
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+#include "OMEGA2.dtsi"
+
+/ {
+       model = "Onion Omega2";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+};
+
+&firmware {
+       reg = <0x50000 0xfb0000>;
+};
+
+&system_led {
+       label = "omega2:amber:system";
+};
diff --git a/target/linux/ramips/dts/OMEGA2.dtsi b/target/linux/ramips/dts/OMEGA2.dtsi
new file mode 100644 (file)
index 0000000..7914834
--- /dev/null
@@ -0,0 +1,174 @@
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "onion,omega", "mediatek,mt7628an-soc";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               system_led: system {
+                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "gpio";
+                       ralink,function = "gpio";
+               };
+
+               perst {
+                       ralink,group = "perst";
+                       ralink,function = "gpio";
+               };
+
+               refclk {
+                       ralink,group = "refclk";
+                       ralink,function = "gpio";
+               };
+
+               i2s {
+                       ralink,group = "i2s";
+                       ralink,function = "gpio";
+               };
+
+               spis {
+                       ralink,group = "spis";
+                       ralink,function = "gpio";
+               };
+
+               wled_kn {
+                       ralink,group = "wled_kn";
+                       ralink,function = "gpio";
+               };
+
+               wled_an {
+                       ralink,group = "wled_an";
+                       ralink,function = "gpio";
+               };
+
+               wdt {
+                       ralink,group = "wdt";
+                       ralink,function = "gpio";
+               };
+
+               pwm0 {
+                       ralink,group = "pwm0";
+                       ralink,function = "gpio";
+               };
+
+               pwm1 {
+                       ralink,group = "pwm1";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&wmac {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+               m25p,chunked-io = <31>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               firmware: partition@50000 {
+                       label = "firmware";
+               };
+       };
+
+       spidev@1 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "linux,spidev";
+               reg = <1>;
+               spi-max-frequency = <40000000>;
+       };
+};
+
+&i2c {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&pwm {
+       status = "okay";
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&sdhci {
+       status = "okay";
+       mediatek,cd-low;
+};
+
+&wmac {
+       status = "okay";
+};
diff --git a/target/linux/ramips/dts/OMEGA2P.dts b/target/linux/ramips/dts/OMEGA2P.dts
new file mode 100644 (file)
index 0000000..a49d94c
--- /dev/null
@@ -0,0 +1,20 @@
+/dts-v1/;
+
+#include "OMEGA2.dtsi"
+
+/ {
+       model = "Onion Omega2+";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x8000000>;
+       };
+};
+
+&firmware {
+       reg = <0x50000 0x1fb0000>;
+};
+
+&system_led {
+       label = "omega2p:amber:system";
+};
index f117102..4a50275 100644 (file)
@@ -34,3 +34,19 @@ define Device/widora-neo
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
 endef
 TARGET_DEVICES += widora-neo
+
+define Device/omega2
+  DTS := OMEGA2
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  DEVICE_TITLE := Onion Omega2
+  DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools
+endef
+TARGET_DEVICES += omega2
+
+define Device/omega2p
+  DTS := OMEGA2P
+  IMAGE_SIZE := $(ralink_default_fw_size_32M)
+  DEVICE_TITLE := Onion Omega2+
+  DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci uboot-envtools kmod-sdhci-mt7620
+endef
+TARGET_DEVICES += omega2p