PKG_DRIVERS = \
adm8211 \
airo \
- ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \
b43 b43legacy brcmsmac brcmfmac brcmutil \
- carl9170 \
hermes hermes-pci hermes-pcmcia hermes-plx\
iwl-legacy iwl3945 iwl4965 iwlwifi \
lib80211 \
CONFIG_PACKAGE_MAC80211_DEBUGFS \
CONFIG_PACKAGE_MAC80211_MESH \
CONFIG_PACKAGE_MAC80211_TRACING \
- CONFIG_PACKAGE_ATH_DEBUG \
- CONFIG_PACKAGE_ATH_DFS \
- CONFIG_PACKAGE_ATH_SPECTRAL \
- CONFIG_PACKAGE_ATH_DYNACK \
CONFIG_PACKAGE_B43_DEBUG \
CONFIG_PACKAGE_B43_PIO \
CONFIG_PACKAGE_B43_PHY_G \
CONFIG_PACKAGE_IWLWIFI_DEBUG \
CONFIG_PACKAGE_IWLWIFI_DEBUGFS \
CONFIG_PACKAGE_RTLWIFI_DEBUG \
- CONFIG_ATH9K_SUPPORT_PCOEM \
- CONFIG_ATH9K_TX99 \
- CONFIG_ATH10K_LEDS \
- CONFIG_ATH10K_THERMAL \
- CONFIG_ATH_USER_REGD \
include $(INCLUDE_DIR)/package.mk
config-$(call config_package,mac80211) += MAC80211
config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH
+include ath.mk
include ralink.mk
PKG_CONFIG_DEPENDS += \
Kernel support for Cisco Aironet cards
endef
-define KernelPackage/ath/config
- if PACKAGE_kmod-ath
- config ATH_USER_REGD
- bool "Force Atheros drivers to respect the user's regdomain settings"
- default y
- help
- Atheros' idea of regulatory handling is that the EEPROM of the card defines
- the regulatory limits and the user is only allowed to restrict the settings
- even further, even if the country allows frequencies or power levels that
- are forbidden by the EEPROM settings.
-
- Select this option if you want the driver to respect the user's decision about
- regulatory settings.
-
- config PACKAGE_ATH_DEBUG
- bool "Atheros wireless debugging"
- help
- Say Y, if you want to debug atheros wireless drivers.
- Only ath9k & ath10k make use of this.
-
- config PACKAGE_ATH_DFS
- bool "Enable DFS support"
- default y
- help
- Dynamic frequency selection (DFS) is required for most of the 5 GHz band
- channels in Europe, US, and Japan.
-
- Select this option if you want to use such channels.
-
- config PACKAGE_ATH_SPECTRAL
- bool "Atheros spectral scan support"
- depends on PACKAGE_ATH_DEBUG
- select KERNEL_RELAY
- help
- Say Y to enable access to the FFT/spectral data via debugfs.
-
- config PACKAGE_ATH_DYNACK
- bool "Enable Dynack support"
- depends on PACKAGE_kmod-ath9k-common
- help
- Enables support for Dynamic ACK estimation, which allows the fastest possible speed
- at any distance automatically by increasing/decreasing the max frame ACK time for
- the most remote station detected. It can be enabled by using iw (iw phy0 set distance auto),
- or by sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink.
-
- Select this option if you want to enable this feature
-
- endif
-endef
-
-define KernelPackage/ath
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros common driver part
- DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79||TARGET_ath25 +kmod-mac80211
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
- MENU:=1
-endef
-
-define KernelPackage/ath/description
- This module contains some common parts needed by Atheros Wireless drivers.
-endef
-
-define KernelPackage/ath5k
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros 5xxx wireless cards support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
- DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath +@DRIVER_11W_SUPPORT
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
- AUTOLOAD:=$(call AutoProbe,ath5k)
-endef
-
-define KernelPackage/ath5k/description
- This module adds support for wireless adapters based on
- Atheros 5xxx chipset.
-endef
-
-define KernelPackage/ath6kl
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros FullMAC wireless devices (common code for ath6kl_sdio and ath6kl_usb)
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl
- HIDDEN:=1
- DEPENDS+= +kmod-ath +@DRIVER_11N_SUPPORT
- FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_core.ko
-endef
-
-define KernelPackage/ath6kl-sdio
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros 802.11n SDIO wireless cards support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl
- DEPENDS+= +kmod-mmc +kmod-ath6kl
- FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko
- AUTOLOAD:=$(call AutoProbe,ath6kl_sdio)
-endef
-
-define KernelPackage/ath6kl-sdio/description
-This module adds support for wireless adapters based on
-Atheros IEEE 802.11n AR6003 and AR6004 family of chipsets.
-endef
-
-define KernelPackage/ath6kl-usb
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros 802.11n USB wireless cards support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl
- DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-ath6kl
- FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_usb.ko
- AUTOLOAD:=$(call AutoProbe,ath6kl_usb)
-endef
-
-define KernelPackage/ath6kl-usb/description
-This module adds support for wireless adapters based on the
-Atheros IEEE 802.11n AR6004 chipset.
-endef
-
-define KernelPackage/ath9k-common
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
- HIDDEN:=1
- DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
-endef
-
-define KernelPackage/ath9k
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros 802.11n PCI wireless cards support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
- DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath9k-common
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
- AUTOLOAD:=$(call AutoProbe,ath9k)
-endef
-
-define KernelPackage/ath9k/description
-This module adds support for wireless adapters based on
-Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
-endef
-
-define KernelPackage/ath9k/config
-
- config ATH9K_SUPPORT_PCOEM
- bool "Support chips used in PC OEM cards"
- depends on PACKAGE_kmod-ath9k
-
- config ATH9K_TX99
- bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)"
- depends on PACKAGE_kmod-ath9k
-
- config ATH9K_UBNTHSR
- bool "Support for Ubiquiti UniFi Outdoor+ access point"
- depends on PACKAGE_kmod-ath9k && (TARGET_ar71xx_generic||TARGET_ath79)
- default y
-
-endef
-
-define KernelPackage/ath9k-htc
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros 802.11n USB device support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
- DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
- AUTOLOAD:=$(call AutoProbe,ath9k_htc)
-endef
-
-define KernelPackage/ath9k-htc/description
-This module adds support for wireless adapters based on
-Atheros USB AR9271 and AR7010 family of chipsets.
-endef
-
-define KernelPackage/ath10k
- $(call KernelPackage/mac80211/Default)
- TITLE:=Atheros 802.11ac wireless cards support
- URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k
- DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT \
- +ATH10K_THERMAL:kmod-hwmon-core +ATH10K_THERMAL:kmod-thermal
- FILES:= \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
- $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
- AUTOLOAD:=$(call AutoProbe,ath10k_pci)
-endef
-
-define KernelPackage/ath10k/description
-This module adds support for wireless adapters based on
-Atheros IEEE 802.11ac family of chipsets. For now only
-PCI is supported.
-endef
-
-define KernelPackage/ath10k/config
-
- config ATH10K_LEDS
- bool "Enable LED support"
- default y
- depends on PACKAGE_kmod-ath10k
-
- config ATH10K_THERMAL
- bool "Enable thermal sensors and throttling support"
- depends on PACKAGE_kmod-ath10k
-
-endef
-
#Broadcom firmware
ifneq ($(CONFIG_B43_FW_6_30),)
PKG_B43_FWV4_NAME:=broadcom-wl
endef
-define KernelPackage/carl9170
- $(call KernelPackage/mac80211/Default)
- TITLE:=Driver for Atheros AR9170 USB sticks
- DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware
- FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
- AUTOLOAD:=$(call AutoProbe,carl9170)
-endef
-
-
define KernelPackage/hermes
$(call KernelPackage/mac80211/Default)
TITLE:=Hermes 802.11b chipset support
AUTOLOAD:=$(call AutoProbe,zd1211rw)
endef
-
-
ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
config-y += \
CFG80211_DEBUGFS \
- MAC80211_DEBUGFS \
- ATH9K_DEBUGFS \
- ATH9K_HTC_DEBUGFS \
- ATH10K_DEBUGFS \
- CARL9170_DEBUGFS \
- ATH5K_DEBUG \
- ATH6KL_DEBUG
+ MAC80211_DEBUGFS
endif
ifdef CONFIG_PACKAGE_MAC80211_TRACING
config-y += \
- ATH10K_TRACING \
- ATH6KL_TRACING \
- ATH_TRACEPOINTS \
- WIL6210_TRACING \
- ATH5K_TRACER \
IWLWIFI_DEVICE_TRACING
endif
config-$(call config_package,airo) += AIRO
-config-$(call config_package,ath) += ATH_CARDS ATH_COMMON ATH_REG_DYNAMIC_USER_REG_HINTS
-config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS
-config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED
-config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL
-config-$(CONFIG_PACKAGE_ATH_DYNACK) += ATH9K_DYNACK
-config-$(call config_package,ath9k) += ATH9K
-config-$(call config_package,ath9k-common) += ATH9K_COMMON
-config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB
-config-$(CONFIG_TARGET_ath79) += ATH9K_AHB
-config-$(CONFIG_TARGET_ipq40xx) += ATH10K_AHB
-config-$(CONFIG_PCI) += ATH9K_PCI
-config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD
-config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM
-config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99
-config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR
-config-$(CONFIG_ATH10K_LEDS) += ATH10K_LEDS
-config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL
-
-config-$(call config_package,ath9k-htc) += ATH9K_HTC
-config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
-
-config-$(call config_package,ath5k) += ATH5K
-ifdef CONFIG_TARGET_ath25
- config-y += ATH5K_AHB
-else
- config-y += ATH5K_PCI
-endif
-
-config-$(call config_package,ath6kl) += ATH6KL
-config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO
-config-$(call config_package,ath6kl-usb) += ATH6KL_USB
-
-config-$(call config_package,carl9170) += CARL9170
-
config-$(call config_package,b43) += B43
config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB
config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA
--- /dev/null
+PKG_DRIVERS += \
+ ath ath5k ath6kl ath6kl-sdio ath6kl-usb ath9k ath9k-common ath9k-htc ath10k \
+ carl9170
+
+PKG_CONFIG_DEPENDS += \
+ CONFIG_PACKAGE_ATH_DEBUG \
+ CONFIG_PACKAGE_ATH_DFS \
+ CONFIG_PACKAGE_ATH_SPECTRAL \
+ CONFIG_PACKAGE_ATH_DYNACK \
+ CONFIG_ATH9K_SUPPORT_PCOEM \
+ CONFIG_ATH9K_TX99 \
+ CONFIG_ATH10K_LEDS \
+ CONFIG_ATH10K_THERMAL \
+ CONFIG_ATH_USER_REGD
+
+ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
+ config-y += \
+ ATH9K_DEBUGFS \
+ ATH9K_HTC_DEBUGFS \
+ ATH10K_DEBUGFS \
+ CARL9170_DEBUGFS \
+ ATH5K_DEBUG \
+ ATH6KL_DEBUG
+endif
+
+ifdef CONFIG_PACKAGE_MAC80211_TRACING
+ config-y += \
+ ATH10K_TRACING \
+ ATH6KL_TRACING \
+ ATH_TRACEPOINTS \
+ ATH5K_TRACER
+endif
+
+config-$(call config_package,ath) += ATH_CARDS ATH_COMMON ATH_REG_DYNAMIC_USER_REG_HINTS
+config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS
+config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED
+config-$(CONFIG_PACKAGE_ATH_SPECTRAL) += ATH9K_COMMON_SPECTRAL ATH10K_SPECTRAL
+config-$(CONFIG_PACKAGE_ATH_DYNACK) += ATH9K_DYNACK
+config-$(call config_package,ath9k) += ATH9K
+config-$(call config_package,ath9k-common) += ATH9K_COMMON
+config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB
+config-$(CONFIG_TARGET_ath79) += ATH9K_AHB
+config-$(CONFIG_TARGET_ipq40xx) += ATH10K_AHB
+config-$(CONFIG_PCI) += ATH9K_PCI
+config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD
+config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM
+config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99
+config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR
+config-$(CONFIG_ATH10K_LEDS) += ATH10K_LEDS
+config-$(CONFIG_ATH10K_THERMAL) += ATH10K_THERMAL
+
+config-$(call config_package,ath9k-htc) += ATH9K_HTC
+config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
+
+config-$(call config_package,ath5k) += ATH5K
+ifdef CONFIG_TARGET_ath25
+ config-y += ATH5K_AHB
+else
+ config-y += ATH5K_PCI
+endif
+
+config-$(call config_package,ath6kl) += ATH6KL
+config-$(call config_package,ath6kl-sdio) += ATH6KL_SDIO
+config-$(call config_package,ath6kl-usb) += ATH6KL_USB
+
+config-$(call config_package,carl9170) += CARL9170
+
+define KernelPackage/ath/config
+ if PACKAGE_kmod-ath
+ config ATH_USER_REGD
+ bool "Force Atheros drivers to respect the user's regdomain settings"
+ default y
+ help
+ Atheros' idea of regulatory handling is that the EEPROM of the card defines
+ the regulatory limits and the user is only allowed to restrict the settings
+ even further, even if the country allows frequencies or power levels that
+ are forbidden by the EEPROM settings.
+
+ Select this option if you want the driver to respect the user's decision about
+ regulatory settings.
+
+ config PACKAGE_ATH_DEBUG
+ bool "Atheros wireless debugging"
+ help
+ Say Y, if you want to debug atheros wireless drivers.
+ Only ath9k & ath10k make use of this.
+
+ config PACKAGE_ATH_DFS
+ bool "Enable DFS support"
+ default y
+ help
+ Dynamic frequency selection (DFS) is required for most of the 5 GHz band
+ channels in Europe, US, and Japan.
+
+ Select this option if you want to use such channels.
+
+ config PACKAGE_ATH_SPECTRAL
+ bool "Atheros spectral scan support"
+ depends on PACKAGE_ATH_DEBUG
+ select KERNEL_RELAY
+ help
+ Say Y to enable access to the FFT/spectral data via debugfs.
+
+ config PACKAGE_ATH_DYNACK
+ bool "Enable Dynack support"
+ depends on PACKAGE_kmod-ath9k-common
+ help
+ Enables support for Dynamic ACK estimation, which allows the fastest possible speed
+ at any distance automatically by increasing/decreasing the max frame ACK time for
+ the most remote station detected. It can be enabled by using iw (iw phy0 set distance auto),
+ or by sending the NL80211_ATTR_WIPHY_DYN_ACK flag to mac80211 driver using netlink.
+
+ Select this option if you want to enable this feature
+
+ endif
+endef
+
+define KernelPackage/ath
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros common driver part
+ DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79||TARGET_ath25 +kmod-mac80211
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
+ MENU:=1
+endef
+
+define KernelPackage/ath/description
+ This module contains some common parts needed by Atheros Wireless drivers.
+endef
+
+define KernelPackage/ath5k
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros 5xxx wireless cards support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
+ DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath +@DRIVER_11W_SUPPORT
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
+ AUTOLOAD:=$(call AutoProbe,ath5k)
+endef
+
+define KernelPackage/ath5k/description
+ This module adds support for wireless adapters based on
+ Atheros 5xxx chipset.
+endef
+
+define KernelPackage/ath6kl
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros FullMAC wireless devices (common code for ath6kl_sdio and ath6kl_usb)
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl
+ HIDDEN:=1
+ DEPENDS+= +kmod-ath +@DRIVER_11N_SUPPORT
+ FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_core.ko
+endef
+
+define KernelPackage/ath6kl-sdio
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros 802.11n SDIO wireless cards support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl
+ DEPENDS+= +kmod-mmc +kmod-ath6kl
+ FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko
+ AUTOLOAD:=$(call AutoProbe,ath6kl_sdio)
+endef
+
+define KernelPackage/ath6kl-sdio/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11n AR6003 and AR6004 family of chipsets.
+endef
+
+define KernelPackage/ath6kl-usb
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros 802.11n USB wireless cards support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath6kl
+ DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-ath6kl
+ FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath6kl/ath6kl_usb.ko
+ AUTOLOAD:=$(call AutoProbe,ath6kl_usb)
+endef
+
+define KernelPackage/ath6kl-usb/description
+This module adds support for wireless adapters based on the
+Atheros IEEE 802.11n AR6004 chipset.
+endef
+
+define KernelPackage/ath9k-common
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+ HIDDEN:=1
+ DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT
+ FILES:= \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
+endef
+
+define KernelPackage/ath9k
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros 802.11n PCI wireless cards support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+ DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx||TARGET_ath79 +kmod-ath9k-common
+ FILES:= \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
+ AUTOLOAD:=$(call AutoProbe,ath9k)
+endef
+
+define KernelPackage/ath9k/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
+endef
+
+define KernelPackage/ath9k/config
+
+ config ATH9K_SUPPORT_PCOEM
+ bool "Support chips used in PC OEM cards"
+ depends on PACKAGE_kmod-ath9k
+
+ config ATH9K_TX99
+ bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)"
+ depends on PACKAGE_kmod-ath9k
+
+ config ATH9K_UBNTHSR
+ bool "Support for Ubiquiti UniFi Outdoor+ access point"
+ depends on PACKAGE_kmod-ath9k && (TARGET_ar71xx_generic||TARGET_ath79)
+ default y
+
+endef
+
+define KernelPackage/ath9k-htc
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros 802.11n USB device support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
+ DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware
+ FILES:= \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
+ AUTOLOAD:=$(call AutoProbe,ath9k_htc)
+endef
+
+define KernelPackage/ath9k-htc/description
+This module adds support for wireless adapters based on
+Atheros USB AR9271 and AR7010 family of chipsets.
+endef
+
+define KernelPackage/ath10k
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Atheros 802.11ac wireless cards support
+ URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath10k
+ DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT \
+ +ATH10K_THERMAL:kmod-hwmon-core +ATH10K_THERMAL:kmod-thermal
+ FILES:= \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
+ $(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
+ AUTOLOAD:=$(call AutoProbe,ath10k_pci)
+endef
+
+define KernelPackage/ath10k/description
+This module adds support for wireless adapters based on
+Atheros IEEE 802.11ac family of chipsets. For now only
+PCI is supported.
+endef
+
+define KernelPackage/ath10k/config
+
+ config ATH10K_LEDS
+ bool "Enable LED support"
+ default y
+ depends on PACKAGE_kmod-ath10k
+
+ config ATH10K_THERMAL
+ bool "Enable thermal sensors and throttling support"
+ depends on PACKAGE_kmod-ath10k
+
+endef
+
+define KernelPackage/carl9170
+ $(call KernelPackage/mac80211/Default)
+ TITLE:=Driver for Atheros AR9170 USB sticks
+ DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware
+ FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
+ AUTOLOAD:=$(call AutoProbe,carl9170)
+endef
projects / openwrt / staging / dedeckeh.git / commitdiff