LINUX_VERSION-3.18 = .43
LINUX_VERSION-4.4 = .74
-LINUX_VERSION-4.9 = .34
+LINUX_VERSION-4.9 = .37
LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c
LINUX_KERNEL_HASH-4.4.74 = c319ad6150d112bd4f8c9d1427868eeafd3ab461becf9457f814e4ba7c57808e
-LINUX_KERNEL_HASH-4.9.34 = 13d159d1b1fa41ea19fcc2defe09d7532f312ee0b8279b8e12c961d8b02a4546
+LINUX_KERNEL_HASH-4.9.37 = f61ecf083b690d97cfdeec2b4457992e98882250c4f41ade36fd7cdfda066090
ifdef KERNEL_PATCHVER
LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))
#include "xhci.h"
#include "xhci-trace.h"
-@@ -230,6 +232,458 @@ static void xhci_pme_acpi_rtd3_enable(st
+@@ -242,6 +244,458 @@ static void xhci_pme_acpi_rtd3_enable(st
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */
/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
-@@ -269,6 +723,22 @@ static int xhci_pci_probe(struct pci_dev
+@@ -281,6 +735,22 @@ static int xhci_pci_probe(struct pci_dev
struct hc_driver *driver;
struct usb_hcd *hcd;
driver = (struct hc_driver *)id->driver_data;
/* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -326,6 +796,16 @@ static void xhci_pci_remove(struct pci_d
+@@ -338,6 +808,16 @@ static void xhci_pci_remove(struct pci_d
{
struct xhci_hcd *xhci;
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -191,7 +191,7 @@ static void xhci_pci_quirks(struct devic
+@@ -203,7 +203,7 @@ static void xhci_pci_quirks(struct devic
}
if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
pdev->device == 0x0015)
/* hcd->irq is 0, we have MSI */
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1678,6 +1678,7 @@ struct xhci_hcd {
+@@ -1679,6 +1679,7 @@ struct xhci_hcd {
/* support xHCI 0.96 spec USB2 software LPM */
unsigned sw_lpm_support:1;
/* support xHCI 1.0 spec USB2 hardware LPM */
+++ /dev/null
-From bb1a619735b4660f21bce3e728b937640024b4ad Mon Sep 17 00:00:00 2001
-From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
-Date: Wed, 8 Feb 2017 17:14:26 -0500
-Subject: [PATCH] net: phy: Initialize mdio clock at probe function
-
-USB PHYs need the MDIO clock divisor enabled earlier to work.
-Initialize mdio clock divisor in probe function. The ext bus
-bit available in the same register will be used by mdio mux
-to enable external mdio.
-
-Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
-Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/mdio-bcm-iproc.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/mdio-bcm-iproc.c
-+++ b/drivers/net/phy/mdio-bcm-iproc.c
-@@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bu
- if (rc)
- return rc;
-
-- iproc_mdio_config_clk(priv->base);
--
- /* Prepare the read operation */
- cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
- (reg << MII_DATA_RA_SHIFT) |
-@@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_b
- if (rc)
- return rc;
-
-- iproc_mdio_config_clk(priv->base);
--
- /* Prepare the write operation */
- cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
- (reg << MII_DATA_RA_SHIFT) |
-@@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platf
- bus->read = iproc_mdio_read;
- bus->write = iproc_mdio_write;
-
-+ iproc_mdio_config_clk(priv->base);
-+
- rc = of_mdiobus_register(bus, pdev->dev.of_node);
- if (rc) {
- dev_err(&pdev->dev, "MDIO bus registration failed\n");
/*
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
-@@ -1660,6 +1660,7 @@ struct xhci_hcd {
- /* For controller with a broken Port Disable implementation */
+@@ -1661,6 +1661,7 @@ struct xhci_hcd {
#define XHCI_BROKEN_PORT_PED (1 << 25)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
-+#define XHCI_FAKE_DOORBELL (1 << 27)
+ #define XHCI_U2_DISABLE_WAKE (1 << 27)
++#define XHCI_FAKE_DOORBELL (1 << 28)
unsigned int num_active_eps;
unsigned int limit_active_eps;
struct bcm2835_dmadev {
struct dma_device ddev;
-@@ -922,6 +924,9 @@ static int bcm2835_dma_probe(struct plat
+@@ -925,6 +927,9 @@ static int bcm2835_dma_probe(struct plat
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
od->base = base;
-@@ -959,6 +964,9 @@ static int bcm2835_dma_probe(struct plat
+@@ -962,6 +967,9 @@ static int bcm2835_dma_probe(struct plat
goto err_no_dma;
}
/* get irqs for each channel that we support */
for (i = 0; i <= BCM2835_DMA_MAX_DMA_CHAN_SUPPORTED; i++) {
/* skip masked out channels */
-@@ -1033,6 +1041,7 @@ static int bcm2835_dma_remove(struct pla
+@@ -1036,6 +1044,7 @@ static int bcm2835_dma_remove(struct pla
{
struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
dma_async_device_unregister(&od->ddev);
bcm2835_dma_free(od);
-@@ -1048,7 +1057,22 @@ static struct platform_driver bcm2835_dm
+@@ -1051,7 +1060,22 @@ static struct platform_driver bcm2835_dm
},
};
+++ /dev/null
-From 9fd7a158ec098ab05b8d3ec2c2973b3dc7e498f3 Mon Sep 17 00:00:00 2001
-From: Matthias Reichl <hias@horus.com>
-Date: Mon, 20 Feb 2017 20:01:16 +0100
-Subject: [PATCH] dmaengine: bcm2835: Fix cyclic DMA period splitting
-
-The code responsible for splitting periods into chunks that
-can be handled by the DMA controller missed to update total_len,
-the number of bytes processed in the current period, when there
-are more chunks to follow.
-
-Therefore total_len was stuck at 0 and the code didn't work at all.
-This resulted in a wrong control block layout and audio issues because
-the cyclic DMA callback wasn't executing on period boundaries.
-
-Fix this by adding the missing total_len update.
-
-Signed-off-by: Matthias Reichl <hias@horus.com>
-Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
-Tested-by: Clive Messer <clive.messer@digitaldreamtime.co.uk>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- drivers/dma/bcm2835-dma.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/dma/bcm2835-dma.c
-+++ b/drivers/dma/bcm2835-dma.c
-@@ -253,8 +253,11 @@ static void bcm2835_dma_create_cb_set_le
- */
-
- /* have we filled in period_length yet? */
-- if (*total_len + control_block->length < period_len)
-+ if (*total_len + control_block->length < period_len) {
-+ /* update number of bytes in this period so far */
-+ *total_len += control_block->length;
- return;
-+ }
-
- /* calculate the length that remains to reach period_length */
- control_block->length = period_len - *total_len;
/**
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
-@@ -983,6 +983,9 @@ static int spi_transfer_one_message(stru
+@@ -985,6 +985,9 @@ static int spi_transfer_one_message(stru
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
trace_spi_transfer_start(msg, xfer);
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1256,6 +1256,13 @@ static int spansion_quad_enable(struct s
- return -EINVAL;
+@@ -1263,6 +1263,13 @@ static int spansion_quad_enable(struct s
+ return ret;
}
+ ret = spi_nor_wait_till_ready(nor);
if (ret < 0)
goto write_err;
written = ret;
-@@ -1312,6 +1401,47 @@ static int spi_nor_check(struct spi_nor
+@@ -1319,6 +1408,47 @@ static int spi_nor_check(struct spi_nor
return 0;
}
int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
{
const struct flash_info *info = NULL;
-@@ -1360,6 +1490,14 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1367,6 +1497,14 @@ int spi_nor_scan(struct spi_nor *nor, co
mutex_init(&nor->lock);
/*
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
* with the software protection bits set
*/
-@@ -1517,6 +1655,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1524,6 +1662,12 @@ int spi_nor_scan(struct spi_nor *nor, co
nor->read_dummy = spi_nor_read_dummy_cycles(nor);
static struct seq_rw_config stfsm_s25fl_write4_configs[] = {
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1625,16 +1625,16 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1632,16 +1632,16 @@ int spi_nor_scan(struct spi_nor *nor, co
/* Dedicated 4-byte command set */
switch (nor->flash_read) {
case SPI_NOR_QUAD:
/* Enable/disable 4-byte addressing mode. */
static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
int enable)
-@@ -1621,27 +1697,10 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1628,27 +1704,10 @@ int spi_nor_scan(struct spi_nor *nor, co
else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
+++ /dev/null
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Date: Wed, 23 Nov 2016 10:40:07 +0100
-Subject: [PATCH] of: Add check to of_scan_flat_dt() before accessing
- initial_boot_params
-
-An empty __dtb_start to __dtb_end section might result in initial_boot_params
-being null for arch/mips/ralink. This showed that the boot process hangs
-indefinitely in of_scan_flat_dt().
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -741,9 +741,12 @@ int __init of_scan_flat_dt(int (*it)(uns
- const char *pathp;
- int offset, rc = 0, depth = -1;
-
-- for (offset = fdt_next_node(blob, -1, &depth);
-- offset >= 0 && depth >= 0 && !rc;
-- offset = fdt_next_node(blob, offset, &depth)) {
-+ if (!blob)
-+ return 0;
-+
-+ for (offset = fdt_next_node(blob, -1, &depth);
-+ offset >= 0 && depth >= 0 && !rc;
-+ offset = fdt_next_node(blob, offset, &depth)) {
-
- pathp = fdt_get_name(blob, offset, NULL);
- if (*pathp == '/')
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
-@@ -698,7 +698,7 @@ static void spi_set_cs(struct spi_device
+@@ -700,7 +700,7 @@ static void spi_set_cs(struct spi_device
enable = !enable;
if (gpio_is_valid(spi->cs_gpio))
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1588,6 +1588,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1595,6 +1595,7 @@ int spi_nor_scan(struct spi_nor *nor, co
if (JEDEC_MFR(info) == SNOR_MFR_ATMEL ||
JEDEC_MFR(info) == SNOR_MFR_INTEL ||
/**
* ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
* @t: the outgoing tunnel device
-@@ -1283,6 +1423,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1285,6 +1425,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
{
struct ip6_tnl *t = netdev_priv(dev);
struct ipv6hdr *ipv6h = ipv6_hdr(skb);
int encap_limit = -1;
__u16 offset;
struct flowi6 fl6;
-@@ -1338,6 +1479,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+@@ -1343,6 +1484,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
fl6.flowi6_mark = skb->mark;
}
if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
return -1;
-@@ -1463,6 +1616,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
+@@ -1470,6 +1623,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
t->parms.flowinfo = p->flowinfo;
t->parms.link = p->link;
t->parms.proto = p->proto;
dst_cache_reset(&t->dst_cache);
ip6_tnl_link_config(t);
return 0;
-@@ -1501,6 +1662,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
+@@ -1508,6 +1669,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
p->flowinfo = u->flowinfo;
p->link = u->link;
p->proto = u->proto;
memcpy(p->name, u->name, sizeof(u->name));
}
-@@ -1878,6 +2040,15 @@ static int ip6_tnl_validate(struct nlatt
+@@ -1885,6 +2047,15 @@ static int ip6_tnl_validate(struct nlatt
return 0;
}
static void ip6_tnl_netlink_parms(struct nlattr *data[],
struct __ip6_tnl_parm *parms)
{
-@@ -1912,6 +2083,46 @@ static void ip6_tnl_netlink_parms(struct
+@@ -1919,6 +2090,46 @@ static void ip6_tnl_netlink_parms(struct
if (data[IFLA_IPTUN_COLLECT_METADATA])
parms->collect_md = true;
}
static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2021,6 +2232,12 @@ static void ip6_tnl_dellink(struct net_d
+@@ -2028,6 +2239,12 @@ static void ip6_tnl_dellink(struct net_d
static size_t ip6_tnl_get_size(const struct net_device *dev)
{
return
/* IFLA_IPTUN_LINK */
nla_total_size(4) +
-@@ -2048,6 +2265,24 @@ static size_t ip6_tnl_get_size(const str
+@@ -2055,6 +2272,24 @@ static size_t ip6_tnl_get_size(const str
nla_total_size(2) +
/* IFLA_IPTUN_COLLECT_METADATA */
nla_total_size(0) +
0;
}
-@@ -2055,6 +2290,9 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2062,6 +2297,9 @@ static int ip6_tnl_fill_info(struct sk_b
{
struct ip6_tnl *tunnel = netdev_priv(dev);
struct __ip6_tnl_parm *parm = &tunnel->parms;
if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2063,9 +2301,27 @@ static int ip6_tnl_fill_info(struct sk_b
+@@ -2070,9 +2308,27 @@ static int ip6_tnl_fill_info(struct sk_b
nla_put_u8(skb, IFLA_IPTUN_ENCAP_LIMIT, parm->encap_limit) ||
nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2103,6 +2359,7 @@ static const struct nla_policy ip6_tnl_p
+@@ -2110,6 +2366,7 @@ static const struct nla_policy ip6_tnl_p
[IFLA_IPTUN_ENCAP_SPORT] = { .type = NLA_U16 },
[IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 },
[IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG },
default:
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
-@@ -88,6 +88,10 @@ static int fib6_rule_action(struct fib_r
+@@ -77,6 +77,10 @@ static int fib6_rule_action(struct fib_r
err = -EACCES;
rt = net->ipv6.ip6_prohibit_entry;
goto discard_pkt;
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -4512,6 +4512,9 @@ static enum gro_result dev_gro_receive(s
+@@ -4513,6 +4513,9 @@ static enum gro_result dev_gro_receive(s
enum gro_result ret;
int grow;
if (!(skb->dev->features & NETIF_F_GRO))
goto normal;
-@@ -5789,6 +5792,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -5790,6 +5793,48 @@ static void __netdev_adjacent_dev_unlink
&upper_dev->adj_list.lower);
}
static int __netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev, bool master,
void *upper_priv, void *upper_info)
-@@ -5987,6 +6032,8 @@ void netdev_upper_dev_unlink(struct net_
+@@ -5988,6 +6033,8 @@ void netdev_upper_dev_unlink(struct net_
list_for_each_entry(i, &upper_dev->all_adj_list.upper, list)
__netdev_adjacent_dev_unlink(dev, i->dev, i->ref_nr);
call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev,
&changeupper_info.info);
}
-@@ -6587,6 +6634,7 @@ int dev_set_mac_address(struct net_devic
+@@ -6588,6 +6635,7 @@ int dev_set_mac_address(struct net_devic
if (err)
return err;
dev->addr_assign_type = NET_ADDR_SET;
* @phydev: the phy_device struct
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -813,6 +813,7 @@ int phy_ethtool_ksettings_get(struct phy
+@@ -816,6 +816,7 @@ int phy_ethtool_ksettings_get(struct phy
struct ethtool_link_ksettings *cmd);
int phy_ethtool_ksettings_set(struct phy_device *phydev,
const struct ethtool_link_ksettings *cmd);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -496,6 +496,12 @@ struct phy_driver {
+@@ -499,6 +499,12 @@ struct phy_driver {
/* Determines the negotiated speed and duplex */
int (*read_status)(struct phy_device *phydev);
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1267,6 +1267,9 @@ int genphy_update_link(struct phy_device
+@@ -1309,6 +1309,9 @@ int genphy_update_link(struct phy_device
{
int status;
phy_suspend(phydev);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -514,6 +514,12 @@ struct phy_driver {
+@@ -517,6 +517,12 @@ struct phy_driver {
*/
int (*did_interrupt)(struct phy_device *phydev);
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1485,7 +1485,7 @@ int genphy_config_init(struct phy_device
+@@ -1527,7 +1527,7 @@ int genphy_config_init(struct phy_device
return 0;
}
{
/* Do nothing for now */
return 0;
-@@ -1724,7 +1724,7 @@ static struct phy_driver genphy_driver[]
+@@ -1798,7 +1798,7 @@ static struct phy_driver genphy_driver[]
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic PHY",
.config_init = genphy_config_init,
.features = PHY_GBIT_FEATURES | SUPPORTED_MII |
SUPPORTED_AUI | SUPPORTED_FIBRE |
-@@ -1738,7 +1738,7 @@ static struct phy_driver genphy_driver[]
+@@ -1812,7 +1812,7 @@ static struct phy_driver genphy_driver[]
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic 10G PHY",
phy_device_free(phydev);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -856,6 +856,23 @@ void mdio_bus_exit(void);
+@@ -859,6 +859,23 @@ void mdio_bus_exit(void);
extern struct bus_type mdio_bus_type;
help
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -2931,10 +2931,20 @@ static int xmit_one(struct sk_buff *skb,
+@@ -2932,10 +2932,20 @@ static int xmit_one(struct sk_buff *skb,
if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
dev_queue_xmit_nit(skb, dev);
return -ENOMEM;
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
-@@ -2703,6 +2703,8 @@ static const struct file_operations proc
+@@ -2713,6 +2713,8 @@ static const struct file_operations proc
static int __init proc_vmalloc_init(void)
{
+++ /dev/null
-From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 16 Mar 2017 21:00:18 +0100
-Subject: [PATCH] pinctrl: ipq4019: Add missing pingroups
-
-This patch adds the missing PINGROUP for GPIO70-99.
-This fixes a crash that happens in pinctrl-msm, if any
-of the GPIO70-99 are accessed.
-
-Fixes: 5303f7827fcd41d ("pinctrl: qcom: ipq4019: set ngpios to correct value")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-@@ -405,6 +405,36 @@ static const struct msm_pingroup ipq4019
- PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(70, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(71, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(72, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(73, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(74, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(75, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(76, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(77, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(78, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(79, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(80, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(81, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(82, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(83, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(84, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(85, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(86, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(87, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(88, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(89, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(90, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(91, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(92, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(93, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(94, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(95, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(96, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(97, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(98, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(99, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- };
-
- static const struct msm_pinctrl_soc_data ipq4019_pinctrl = {
+++ /dev/null
-From 833bfade96561216aa2129516a5926a0326860a2 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Mon, 17 Apr 2017 01:38:05 +0200
-Subject: spi: double time out tolerance
-
-The generic SPI code calculates how long the issued transfer would take
-and adds 100ms in addition to the timeout as tolerance. On my 500 MHz
-Lantiq Mips SoC I am getting timeouts from the SPI like this when the
-system boots up:
-
-m25p80 spi32766.4: SPI transfer timed out
-blk_update_request: I/O error, dev mtdblock3, sector 2
-SQUASHFS error: squashfs_read_data failed to read block 0x6e
-
-After increasing the tolerance for the timeout to 200ms I haven't seen
-these SPI transfer time outs any more.
-The Lantiq SPI driver in use here has an extra work queue in between,
-which gets triggered when the controller send the last word and the
-hardware FIFOs used for reading and writing are only 8 words long.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -1004,7 +1004,7 @@ static int spi_transfer_one_message(stru
- ret = 0;
- ms = 8LL * 1000LL * xfer->len;
- do_div(ms, xfer->speed_hz);
-- ms += ms + 100; /* some tolerance */
-+ ms += ms + 200; /* some tolerance */
-
- if (ms > UINT_MAX)
- ms = UINT_MAX;
struct netpoll *netpoll;
int err = 0;
-@@ -1235,11 +1235,16 @@ int dsa_slave_create(struct dsa_switch *
+@@ -1233,11 +1233,16 @@ int dsa_slave_create(struct dsa_switch *
struct net_device *master;
struct net_device *slave_dev;
struct dsa_slave_priv *p;
slave_dev = alloc_netdev(sizeof(struct dsa_slave_priv), name,
NET_NAME_UNKNOWN, ether_setup);
-@@ -1265,6 +1270,7 @@ int dsa_slave_create(struct dsa_switch *
+@@ -1263,6 +1268,7 @@ int dsa_slave_create(struct dsa_switch *
p->parent = ds;
p->port = port;
p->xmit = dst->tag_ops->xmit;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -426,6 +426,7 @@ struct phy_device {
+@@ -429,6 +429,7 @@ struct phy_device {
u8 mdix;
+EXPORT_SYMBOL(phy_write_mmd);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -627,14 +627,7 @@ struct phy_fixup {
+@@ -630,14 +630,7 @@ struct phy_fixup {
*
* Same rules as for phy_read();
*/
/**
* phy_read_mmd_indirect - reads data from the MMD registers
-@@ -728,16 +721,7 @@ static inline bool phy_is_pseudo_fixed_l
+@@ -731,16 +724,7 @@ static inline bool phy_is_pseudo_fixed_l
*
* Same rules as for phy_write();
*/
EXPORT_SYMBOL(phy_write_mmd);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -570,6 +570,30 @@ struct phy_driver {
+@@ -573,6 +573,30 @@ struct phy_driver {
*/
void (*link_change_notify)(struct phy_device *dev);
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -1343,11 +1343,16 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
+@@ -1343,14 +1343,19 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
*/
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
- int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
+ int cap, adv;
-- phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
+- /* Mask prohibited EEE modes */
+- val &= ~phydev->eee_broken_modes;
+ /* Get Supported EEE */
+ cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
+ if (cap < 0)
+ return cap;
++
++ adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
+
+- phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
++ /* Mask prohibited EEE modes */
++ adv &= ~phydev->eee_broken_modes;
- return 0;
-+ adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
-+
+ return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
}
EXPORT_SYMBOL(phy_ethtool_set_eee);
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -1343,16 +1343,33 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
+@@ -1343,19 +1343,36 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
*/
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
+
adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
+ /* Mask prohibited EEE modes */
+ adv &= ~phydev->eee_broken_modes;
+
- return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
+ if (old_adv != adv) {
+ ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
+EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1410,27 +1410,19 @@ EXPORT_SYMBOL(genphy_read_status);
+@@ -1452,27 +1452,19 @@ EXPORT_SYMBOL(genphy_read_status);
static int gen10g_read_status(struct phy_device *phydev)
{
}
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -807,6 +807,8 @@ static inline const char *phydev_name(co
+@@ -810,6 +810,8 @@ static inline const char *phydev_name(co
void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
__printf(2, 3);
void phy_attached_info(struct phy_device *phydev);
int genphy_config_init(struct phy_device *phydev);
int genphy_setup_forced(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
-@@ -817,6 +819,16 @@ int genphy_read_status(struct phy_device
+@@ -820,6 +822,16 @@ int genphy_read_status(struct phy_device
int genphy_suspend(struct phy_device *phydev);
int genphy_resume(struct phy_device *phydev);
int genphy_soft_reset(struct phy_device *phydev);
/**
* phy_aneg_done - return auto-negotiation status
-@@ -1439,3 +1457,14 @@ int phy_ethtool_set_link_ksettings(struc
+@@ -1442,3 +1460,14 @@ int phy_ethtool_set_link_ksettings(struc
return phy_ethtool_ksettings_set(phydev, cmd);
}
EXPORT_SYMBOL(phy_ethtool_set_link_ksettings);
{
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -642,6 +642,9 @@ struct phy_fixup {
+@@ -645,6 +645,9 @@ struct phy_fixup {
int (*run)(struct phy_device *phydev);
};
{
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -645,6 +645,21 @@ struct phy_fixup {
+@@ -648,6 +648,21 @@ struct phy_fixup {
const char *phy_speed_to_str(int speed);
const char *phy_duplex_to_str(unsigned int duplex);
struct sk_buff;
/*
-@@ -422,6 +423,7 @@ struct phy_device {
+@@ -425,6 +426,7 @@ struct phy_device {
struct mutex lock;
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
-@@ -1679,7 +1679,8 @@ static struct phy_driver marvell_drivers
+@@ -1678,7 +1678,8 @@ static struct phy_driver marvell_drivers
.phy_id = MARVELL_PHY_ID_88E1510,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1510",
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
-@@ -1531,7 +1531,7 @@ static struct phy_driver marvell_drivers
+@@ -1530,7 +1530,7 @@ static struct phy_driver marvell_drivers
.phy_id = MARVELL_PHY_ID_88E1111,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
-@@ -1699,7 +1699,7 @@ static struct phy_driver marvell_drivers
+@@ -1698,7 +1698,7 @@ static struct phy_driver marvell_drivers
.phy_id = MARVELL_PHY_ID_88E1540,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1540",
+++ /dev/null
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 23 Dec 2016 18:54:01 +0000
-Subject: [PATCH] net: phy: fix marvell phy status reading
-
-The Marvell driver incorrectly provides phydev->lp_advertising as the
-logical and of the link partner's advert and our advert. This is
-incorrect - this field is supposed to store the link parter's unmodified
-advertisment.
-
-This allows ethtool to report the correct link partner auto-negotiation
-status.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
-
---- a/drivers/net/phy/marvell.c
-+++ b/drivers/net/phy/marvell.c
-@@ -1114,8 +1114,6 @@ static int marvell_read_status_page(stru
- if (adv < 0)
- return adv;
-
-- lpa &= adv;
--
- if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
- phydev->duplex = DUPLEX_FULL;
- else
i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
if (ret == 0)
ret = i;
-@@ -1200,7 +1198,8 @@ static int marvell_read_status(struct ph
- int err;
-
- /* Check the fiber mode first */
-- if (phydev->supported & SUPPORTED_FIBRE) {
-+ if (phydev->supported & SUPPORTED_FIBRE &&
-+ phydev->interface != PHY_INTERFACE_MODE_SGMII) {
- err = phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_M1111_FIBER);
- if (err < 0)
- goto error;
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1534,6 +1534,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1541,6 +1541,7 @@ int spi_nor_scan(struct spi_nor *nor, co
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
-@@ -1598,7 +1599,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1605,7 +1606,12 @@ int spi_nor_scan(struct spi_nor *nor, co
spi_nor_wait_till_ready(nor);
}
static int macronix_quad_enable(struct spi_nor *nor)
{
int ret, val;
-@@ -1623,10 +1683,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1630,10 +1690,12 @@ int spi_nor_scan(struct spi_nor *nor, co
}
/* sst nor chips use AAI word program */
if (info->flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
-@@ -1656,11 +1718,20 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -1663,11 +1725,20 @@ int spi_nor_scan(struct spi_nor *nor, co
mtd->writebufsize = nor->page_size;
if (np) {
projects / openwrt / staging / dedeckeh.git / commitdiff