#include <linux/clk.h>
#include <linux/module.h>
#include <linux/mbus.h>
+#include <linux/mfd/syscon.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
-#include <linux/of_pci.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/of_irq.h>
+#include <linux/of_pci.h>
#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/clk.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/io.h>
#include <linux/sizes.h>
-#define OXNAS_UART1_BASE 0x44200000
-#define OXNAS_UART1_SIZE SZ_32
-#define OXNAS_UART1_BASE_VA 0xF0000000
-
-#define OXNAS_UART2_BASE 0x44300000
-#define OXNAS_UART2_SIZE SZ_32
-
-#define OXNAS_PERCPU_BASE 0x47000000
-#define OXNAS_PERCPU_SIZE SZ_8K
-#define OXNAS_PERCPU_BASE_VA 0xF0002000
-
-#define OXNAS_SYSCRTL_BASE 0x44E00000
-#define OXNAS_SYSCRTL_SIZE SZ_4K
-#define OXNAS_SYSCRTL_BASE_VA 0xF0004000
-
-#define OXNAS_SECCRTL_BASE 0x44F00000
-#define OXNAS_SECCRTL_SIZE SZ_4K
-#define OXNAS_SECCRTL_BASE_VA 0xF0005000
-
-#define OXNAS_RPSA_BASE 0x44400000
-#define OXNAS_RPSA_SIZE SZ_4K
-#define OXNAS_RPSA_BASE_VA 0xF0006000
-
-#define OXNAS_RPSC_BASE 0x44500000
-#define OXNAS_RPSC_SIZE SZ_4K
-#define OXNAS_RPSC_BASE_VA 0xF0007000
-
-
-/*
- * Location of flags and vectors in SRAM for controlling the booting of the
- * secondary ARM11 processors.
- */
-
-#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA
-#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100)
-
-#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
-#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
-
-/**
- * System block reset and clock control
- */
-#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20)
-#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24)
-#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C)
-#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30)
-#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34)
-#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38)
-
-#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48)
-#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64)
-#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C)
-#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78)
-#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100)
-
-/* Scratch registers */
-#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
-#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
-#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc)
-#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0)
-
-#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0)
-#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4)
-#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8)
-#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC)
-
-#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40)
-#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44)
-#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8)
-#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84)
-#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90)
-
-/* pcie */
-#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114)
-
-/* System control multi-function pin function selection */
-#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14)
-#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c)
-#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94)
-#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c)
-#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4)
-#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac)
-
-/* Secure control multi-function pin function selection */
-#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14)
-#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c)
-#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94)
-#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c)
-#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4)
-#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac)
-
-#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68)
-#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98)
-#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0)
-#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8)
-#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0)
-#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
-#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
-
-#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10)
-#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108)
-#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C)
-#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC)
-
-#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10)
-#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108)
-#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C)
-#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC)
-
-#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224)
-
-#define REF300_DIV_INT_SHIFT 8
-#define REF300_DIV_FRAC_SHIFT 0
-#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
-#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
-
-#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16
-#define USBHSPHY_SUSPENDM_MANUAL_STATE 15
-#define USBHSPHY_ATE_ESET 14
-#define USBHSPHY_TEST_DIN 6
-#define USBHSPHY_TEST_ADD 2
-#define USBHSPHY_TEST_DOUT_SEL 1
-#define USBHSPHY_TEST_CLK 0
-
-#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5
-#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
-#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
-#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
-
-#define USBAMUX_DEVICE BIT(4)
-
-#define USBPHY_REFCLKDIV_SHIFT 2
-#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT)
-#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT)
-#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT)
-
-#define USB_CTRL_USB_CKO_SEL_BIT 0
-
-#define USB_INT_CLK_XTAL 0
-#define USB_INT_CLK_REF300 2
-#define USB_INT_CLK_PLLB 3
-
-#define SYS_CTRL_GMAC_CKEN_RX_IN 14
-#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13
-#define SYS_CTRL_GMAC_CKEN_RX_OUT 12
-#define SYS_CTRL_GMAC_CKEN_TX_IN 10
-#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9
-#define SYS_CTRL_GMAC_CKEN_TX_OUT 8
-#define SYS_CTRL_GMAC_RX_SOURCE 7
-#define SYS_CTRL_GMAC_TX_SOURCE 6
-#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4
-#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3
-#define SYS_CTRL_GMAC_RGMII 2
-#define SYS_CTRL_GMAC_SIMPLE_MUX 1
-#define SYS_CTRL_GMAC_CKEN_GTX 0
-#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0
-#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8
-#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16
-#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24
-#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT)
-#define SYS_CTRL_GMAC_TXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT)
-#define SYS_CTRL_GMAC_RX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT)
-#define SYS_CTRL_GMAC_RXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT)
-
-#define PLLB_BYPASS 1
-#define PLLB_ENSAT 3
-#define PLLB_OUTDIV 4
-#define PLLB_REFDIV 8
-#define PLLB_DIV_INT_SHIFT 8
-#define PLLB_DIV_FRAC_SHIFT 0
-#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
-#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
-
-#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0
-#define SYS_CTRL_CKCTRL_SLOW_BIT 8
-
-#define SYS_CTRL_UART2_DEQ_EN 0
-#define SYS_CTRL_UART3_DEQ_EN 1
-#define SYS_CTRL_UART3_IQ_EN 2
-#define SYS_CTRL_UART4_IQ_EN 3
-#define SYS_CTRL_UART4_NOT_PCI_MODE 4
-
-#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT 11
-
-#define PLLA_REFDIV_MASK 0x3F
-#define PLLA_REFDIV_SHIFT 8
-#define PLLA_OUTDIV_MASK 0x7
-#define PLLA_OUTDIV_SHIFT 4
-
-/* bit numbers of clock control register */
-#define SYS_CTRL_CLK_COPRO 0
-#define SYS_CTRL_CLK_DMA 1
-#define SYS_CTRL_CLK_CIPHER 2
-#define SYS_CTRL_CLK_SD 3
-#define SYS_CTRL_CLK_SATA 4
-#define SYS_CTRL_CLK_I2S 5
-#define SYS_CTRL_CLK_USBHS 6
-#define SYS_CTRL_CLK_MACA 7
-#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA
-#define SYS_CTRL_CLK_PCIEA 8
-#define SYS_CTRL_CLK_STATIC 9
-#define SYS_CTRL_CLK_MACB 10
-#define SYS_CTRL_CLK_PCIEB 11
-#define SYS_CTRL_CLK_REF600 12
-#define SYS_CTRL_CLK_USBDEV 13
-#define SYS_CTRL_CLK_DDR 14
-#define SYS_CTRL_CLK_DDRPHY 15
-#define SYS_CTRL_CLK_DDRCK 16
-
-
-/* bit numbers of reset control register */
-#define SYS_CTRL_RST_SCU 0
-#define SYS_CTRL_RST_COPRO 1
-#define SYS_CTRL_RST_ARM0 2
-#define SYS_CTRL_RST_ARM1 3
-#define SYS_CTRL_RST_USBHS 4
-#define SYS_CTRL_RST_USBHSPHYA 5
-#define SYS_CTRL_RST_MACA 6
-#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA
-#define SYS_CTRL_RST_PCIEA 7
-#define SYS_CTRL_RST_SGDMA 8
-#define SYS_CTRL_RST_CIPHER 9
-#define SYS_CTRL_RST_DDR 10
-#define SYS_CTRL_RST_SATA 11
-#define SYS_CTRL_RST_SATA_LINK 12
-#define SYS_CTRL_RST_SATA_PHY 13
-#define SYS_CTRL_RST_PCIEPHY 14
-#define SYS_CTRL_RST_STATIC 15
-#define SYS_CTRL_RST_GPIO 16
-#define SYS_CTRL_RST_UART1 17
-#define SYS_CTRL_RST_UART2 18
-#define SYS_CTRL_RST_MISC 19
-#define SYS_CTRL_RST_I2S 20
-#define SYS_CTRL_RST_SD 21
-#define SYS_CTRL_RST_MACB 22
-#define SYS_CTRL_RST_PCIEB 23
-#define SYS_CTRL_RST_VIDEO 24
-#define SYS_CTRL_RST_DDR_PHY 25
-#define SYS_CTRL_RST_USBHSPHYB 26
-#define SYS_CTRL_RST_USBDEV 27
-#define SYS_CTRL_RST_ARMDBG 29
-#define SYS_CTRL_RST_PLLA 30
-#define SYS_CTRL_RST_PLLB 31
+#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114
static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
{
void __iomem *cfgbase;
void __iomem *base;
void __iomem *inbound;
- void __iomem *outbound;
- void __iomem *pcie_ctrl;
+ struct regmap *sys_ctrl;
+ unsigned int outbound_offset;
+ unsigned int pcie_ctrl_offset;
int haslink;
struct platform_device *pdev;
static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
{
- oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL,
+ regmap_update_bits(pcie->sys_ctrl, pcie->outbound_offset + PCIE_AHB_SLAVE_CTRL,
PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
wmb();
}
static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
{
unsigned long end;
+ unsigned int val;
/* Poll for PCIE link up */
end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
while (!time_after(jiffies, end)) {
- if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP)
+ regmap_read(pcie->sys_ctrl, pcie->pcie_ctrl_offset, &val);
+ if (val & PCIE_LINK_UP)
return 1;
}
return 0;
*/
/* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
- writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR);
- writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT);
- writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_ADDR, pcie->non_mem.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_LIMIT, pcie->non_mem.end);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM0_MEM_ADDR, pcie->non_mem.start);
/* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
- writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR);
- writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT);
- writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_ADDR, pcie->pre_mem.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_LIMIT, pcie->pre_mem.end);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM1_MEM_ADDR, pcie->pre_mem.start);
/* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
- writel_relaxed(pcie->io.start, pcie->outbound + PCIE_IN_IO_ADDR);
- writel_relaxed(pcie->io.end, pcie->outbound + PCIE_IN_IO_LIMIT);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_ADDR, pcie->io.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_LIMIT, pcie->io.end);
+
/* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
- writel_relaxed(pcie->cfg.start, pcie->outbound + PCIE_IN_CFG0_ADDR);
- writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_ADDR, pcie->cfg.start);
+ regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_LIMIT, pcie->cfg.end);
wmb();
/* Enable outbound address translation */
- oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS);
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, PCIE_OBTRANS, PCIE_OBTRANS);
wmb();
/*
}
void oxnas_pcie_init_shared_hw(struct platform_device *pdev,
- void __iomem *phybase)
+ void __iomem *phybase,
+ struct regmap *sys_ctrl)
{
struct reset_control *rstc;
int ret;
/* generate clocks from HCSL buffers, shared parts */
- writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL);
+ regmap_write(sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET, HCSL_BIAS_ON|HCSL_PCIE_EN);
/* Ensure PCIe PHY is properly reset */
rstc = reset_control_get(&pdev->dev, "phy");
}
/* Enable PCIe Pre-Emphasis: What these value means? */
-
writel(ADDR_VAL(0x0014), phybase + PHY_ADDR);
writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA);
writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA);
writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA);
}
-static int oxnas_pcie_shared_init(struct platform_device *pdev)
+static int oxnas_pcie_shared_init(struct platform_device *pdev, struct regmap *sys_ctrl)
{
if (++pcie_shared.refcount == 1) {
/* we are the first */
--pcie_shared.refcount;
return -ENOMEM;
}
- oxnas_pcie_init_shared_hw(pdev, phy);
+ oxnas_pcie_init_shared_hw(pdev, phy, sys_ctrl);
iounmap(phy);
return 0;
} else {
if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
&outbound_ctrl_offset))
return -EINVAL;
- /* SYSCRTL is shared by too many drivers, so is mapped by board file */
- pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset);
+ pcie->outbound_offset = outbound_ctrl_offset;
if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
&pcie_ctrl_offset))
return -EINVAL;
- pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset);
+ pcie->pcie_ctrl_offset = pcie_ctrl_offset;
return 0;
}
mdelay(100);
}
- oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en));
+ regmap_update_bits(pcie->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET,
+ BIT(pcie->hcsl_en), BIT(pcie->hcsl_en));
/* core */
ret = device_reset(&pdev->dev);
}
/* allow entry to L23 state */
- oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23);
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+ PCIE_READY_ENTR_L23, PCIE_READY_ENTR_L23);
/* Set PCIe core into RootCore mode */
- oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK,
- PCIE_DEVICE_TYPE_ROOT);
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+ PCIE_DEVICE_TYPE_MASK, PCIE_DEVICE_TYPE_ROOT);
wmb();
/* Bring up the PCI core */
- oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM);
+ regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset,
+ PCIE_LTSSM, PCIE_LTSSM);
wmb();
}
pcie->haslink = 1;
spin_lock_init(&pcie->lock);
+ pcie->sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl");
+ if (IS_ERR(pcie->sys_ctrl))
+ return PTR_ERR(pcie->sys_ctrl);
+
ret = oxnas_pcie_init_res(pdev, pcie, np);
if (ret)
return ret;
goto err_free_gpio;
}
- ret = oxnas_pcie_shared_init(pdev);
+ ret = oxnas_pcie_shared_init(pdev, pcie->sys_ctrl);
if (ret)
goto err_free_gpio;
projects / openwrt / staging / dedeckeh.git / commitdiff