brcm63xx: drop linux 4.1 support
authorÁlvaro Fernández Rojas <noltari@gmail.com>
Tue, 24 May 2016 18:59:54 +0000 (20:59 +0200)
committerÁlvaro Fernández Rojas <noltari@gmail.com>
Fri, 3 Jun 2016 14:25:11 +0000 (16:25 +0200)
Switch to linux 4.4 now that it has been enough tested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
162 files changed:
target/linux/brcm63xx/config-4.1 [deleted file]
target/linux/brcm63xx/patches-4.1/001-4.2-MIPS-Add-support-for-vmlinux.bin-appended-dtb.patch [deleted file]
target/linux/brcm63xx/patches-4.1/002-4.2-irqchip-Move-IRQCHIP_DECLARE-macro-to-include-linux-.patch [deleted file]
target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch [deleted file]
target/linux/brcm63xx/patches-4.1/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [deleted file]
target/linux/brcm63xx/patches-4.1/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [deleted file]
target/linux/brcm63xx/patches-4.1/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [deleted file]
target/linux/brcm63xx/patches-4.1/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [deleted file]
target/linux/brcm63xx/patches-4.1/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-4.1/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-4.1/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-4.1/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-4.1/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-4.1/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-4.1/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [deleted file]
target/linux/brcm63xx/patches-4.1/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch [deleted file]
target/linux/brcm63xx/patches-4.1/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch [deleted file]
target/linux/brcm63xx/patches-4.1/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch [deleted file]
target/linux/brcm63xx/patches-4.1/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch [deleted file]
target/linux/brcm63xx/patches-4.1/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch [deleted file]
target/linux/brcm63xx/patches-4.1/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch [deleted file]
target/linux/brcm63xx/patches-4.1/302-extended-platform-devices.patch [deleted file]
target/linux/brcm63xx/patches-4.1/303-spi-board-info.patch [deleted file]
target/linux/brcm63xx/patches-4.1/309-cfe_version_mod.patch [deleted file]
target/linux/brcm63xx/patches-4.1/310-cfe_simplify_detection.patch [deleted file]
target/linux/brcm63xx/patches-4.1/311-bcm63xxpart_use_cfedetection.patch [deleted file]
target/linux/brcm63xx/patches-4.1/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch [deleted file]
target/linux/brcm63xx/patches-4.1/321-irqchip-add-support-for-bcm6345-style-external-inter.patch [deleted file]
target/linux/brcm63xx/patches-4.1/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch [deleted file]
target/linux/brcm63xx/patches-4.1/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch [deleted file]
target/linux/brcm63xx/patches-4.1/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch [deleted file]
target/linux/brcm63xx/patches-4.1/331-MIPS-BCM63XX-define-variant-id-field.patch [deleted file]
target/linux/brcm63xx/patches-4.1/332-MIPS-BCM63XX-detect-BCM6328-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.1/333-MIPS-BCM63XX-detect-BCM6362-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.1/334-MIPS-BCM63XX-detect-BCM6368-variants.patch [deleted file]
target/linux/brcm63xx/patches-4.1/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch [deleted file]
target/linux/brcm63xx/patches-4.1/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch [deleted file]
target/linux/brcm63xx/patches-4.1/337-MIPS-BCM63XX-widen-cpuid-field.patch [deleted file]
target/linux/brcm63xx/patches-4.1/338-MIPS-BCM63XX-increase-number-of-IRQs.patch [deleted file]
target/linux/brcm63xx/patches-4.1/339-MIPS-BCM63XX-add-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.1/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch [deleted file]
target/linux/brcm63xx/patches-4.1/341-MIPS-BCM63XX-add-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.1/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch [deleted file]
target/linux/brcm63xx/patches-4.1/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch [deleted file]
target/linux/brcm63xx/patches-4.1/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch [deleted file]
target/linux/brcm63xx/patches-4.1/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch [deleted file]
target/linux/brcm63xx/patches-4.1/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch [deleted file]
target/linux/brcm63xx/patches-4.1/347-MIPS-BCM6318-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-4.1/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch [deleted file]
target/linux/brcm63xx/patches-4.1/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch [deleted file]
target/linux/brcm63xx/patches-4.1/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.1/351-set-board-usbh-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.1/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch [deleted file]
target/linux/brcm63xx/patches-4.1/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch [deleted file]
target/linux/brcm63xx/patches-4.1/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch [deleted file]
target/linux/brcm63xx/patches-4.1/357-MIPS-BCM63XX-use-platform-data-for-the-sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.1/358-MIPS-BCM63XX-make-fallback-sprom-optional.patch [deleted file]
target/linux/brcm63xx/patches-4.1/359-MIPS-BCM63XX-allow-different-types-of-sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.1/360-MIPS-BCM63XX-add-support-for-raw-sproms.patch [deleted file]
target/linux/brcm63xx/patches-4.1/361-MIPS-BCM63XX-add-raw-fallback-sproms-for-most-common.patch [deleted file]
target/linux/brcm63xx/patches-4.1/362-MIPS-BCM63XX-also-register-a-fallback-sprom-for-bcma.patch [deleted file]
target/linux/brcm63xx/patches-4.1/363-MIPS-BCM63XX-add-BCMA-based-sprom-templates.patch [deleted file]
target/linux/brcm63xx/patches-4.1/364-MIPS-BCM63XX-allow-board-files-to-provide-sprom-fixu.patch [deleted file]
target/linux/brcm63xx/patches-4.1/365-MIPS-BCM63XX-allow-setting-a-pci-bus-device-for-fall.patch [deleted file]
target/linux/brcm63xx/patches-4.1/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch [deleted file]
target/linux/brcm63xx/patches-4.1/368-MIPS-BCM63XX-add-support-for-matching-the-board_info.patch [deleted file]
target/linux/brcm63xx/patches-4.1/369-MIPS-BCM63XX-populate-the-compatible-to-board_info-l.patch [deleted file]
target/linux/brcm63xx/patches-4.1/371_add_of_node_available_by_alias.patch [deleted file]
target/linux/brcm63xx/patches-4.1/372_dont_register_pflash_when_available_in_dtb.patch [deleted file]
target/linux/brcm63xx/patches-4.1/373-MIPS-BCM63XX-register-interrupt-controllers-through-.patch [deleted file]
target/linux/brcm63xx/patches-4.1/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch [deleted file]
target/linux/brcm63xx/patches-4.1/375-MIPS-BCM63XX-switch-to-new-gpio-driver.patch [deleted file]
target/linux/brcm63xx/patches-4.1/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch [deleted file]
target/linux/brcm63xx/patches-4.1/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch [deleted file]
target/linux/brcm63xx/patches-4.1/378-MIPS-BCM63XX-do-not-register-gpio-controller-if-pres.patch [deleted file]
target/linux/brcm63xx/patches-4.1/379-MIPS-BCM63XX-provide-a-gpio-lookup-for-the-pcmcia-re.patch [deleted file]
target/linux/brcm63xx/patches-4.1/380-pcmcia-bcm63xx_pmcia-use-the-new-named-gpio.patch [deleted file]
target/linux/brcm63xx/patches-4.1/400-bcm963xx_flashmap.patch [deleted file]
target/linux/brcm63xx/patches-4.1/401-bcm963xx_real_rootfs_length.patch [deleted file]
target/linux/brcm63xx/patches-4.1/402_bcm63xx_enet_vlan_incoming_fixed.patch [deleted file]
target/linux/brcm63xx/patches-4.1/403-6358-enet1-external-mii-clk.patch [deleted file]
target/linux/brcm63xx/patches-4.1/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [deleted file]
target/linux/brcm63xx/patches-4.1/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [deleted file]
target/linux/brcm63xx/patches-4.1/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [deleted file]
target/linux/brcm63xx/patches-4.1/412-MTD-physmap-allow-passing-pp_data.patch [deleted file]
target/linux/brcm63xx/patches-4.1/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [deleted file]
target/linux/brcm63xx/patches-4.1/414-MTD-m25p80-allow-passing-pp_data.patch [deleted file]
target/linux/brcm63xx/patches-4.1/415-MIPS-BCM63XX-export-the-attached-flash-type.patch [deleted file]
target/linux/brcm63xx/patches-4.1/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [deleted file]
target/linux/brcm63xx/patches-4.1/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch [deleted file]
target/linux/brcm63xx/patches-4.1/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch [deleted file]
target/linux/brcm63xx/patches-4.1/420-BCM63XX-add-endian-check-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-4.1/421-BCM63XX-add-led-pin-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-4.1/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [deleted file]
target/linux/brcm63xx/patches-4.1/423-bcm63xx_enet_add_b53_support.patch [deleted file]
target/linux/brcm63xx/patches-4.1/424-bcm63xx_enet_no_request_mem_region.patch [deleted file]
target/linux/brcm63xx/patches-4.1/425-bcm63xxpart_parse_paritions_from_dt.patch [deleted file]
target/linux/brcm63xx/patches-4.1/427-boards_probe_switch.patch [deleted file]
target/linux/brcm63xx/patches-4.1/499-allow_better_context_for_board_patches.patch [deleted file]
target/linux/brcm63xx/patches-4.1/500-board-D4PW.patch [deleted file]
target/linux/brcm63xx/patches-4.1/501-board-NB4.patch [deleted file]
target/linux/brcm63xx/patches-4.1/502-board-96338W2_E7T.patch [deleted file]
target/linux/brcm63xx/patches-4.1/503-board-CPVA642.patch [deleted file]
target/linux/brcm63xx/patches-4.1/504-board_dsl_274xb_rev_c.patch [deleted file]
target/linux/brcm63xx/patches-4.1/505-board_spw500v.patch [deleted file]
target/linux/brcm63xx/patches-4.1/506-board_gw6200_gw6000.patch [deleted file]
target/linux/brcm63xx/patches-4.1/507-board-MAGIC.patch [deleted file]
target/linux/brcm63xx/patches-4.1/508-board_hw553.patch [deleted file]
target/linux/brcm63xx/patches-4.1/509-board_rta1320_16m.patch [deleted file]
target/linux/brcm63xx/patches-4.1/510-board_spw303v.patch [deleted file]
target/linux/brcm63xx/patches-4.1/511-board_V2500V.patch [deleted file]
target/linux/brcm63xx/patches-4.1/512-board_BTV2110.patch [deleted file]
target/linux/brcm63xx/patches-4.1/513-MIPS-BCM63XX-add-inventel-Livebox-support.patch [deleted file]
target/linux/brcm63xx/patches-4.1/514-board_ct536_ct5621.patch [deleted file]
target/linux/brcm63xx/patches-4.1/515-board_DWV-S0_fixes.patch [deleted file]
target/linux/brcm63xx/patches-4.1/516-board_96348A-122.patch [deleted file]
target/linux/brcm63xx/patches-4.1/517-RTA1205W_16_uart_fixes.patch [deleted file]
target/linux/brcm63xx/patches-4.1/519_board_CPVA502plus.patch [deleted file]
target/linux/brcm63xx/patches-4.1/520-bcm63xx-add-support-for-96368MVWG-board.patch [deleted file]
target/linux/brcm63xx/patches-4.1/521-bcm63xx-add-support-for-96368MVNgr-board.patch [deleted file]
target/linux/brcm63xx/patches-4.1/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-4.1/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-4.1/524-board_dsl_274xb_rev_f.patch [deleted file]
target/linux/brcm63xx/patches-4.1/525-board_96348w3.patch [deleted file]
target/linux/brcm63xx/patches-4.1/526-board_CT6373-1.patch [deleted file]
target/linux/brcm63xx/patches-4.1/527-board_dva-g3810bn-tl-1.patch [deleted file]
target/linux/brcm63xx/patches-4.1/528-board_nb6.patch [deleted file]
target/linux/brcm63xx/patches-4.1/529-board_fast2604.patch [deleted file]
target/linux/brcm63xx/patches-4.1/530-board_A4001N1.patch [deleted file]
target/linux/brcm63xx/patches-4.1/531-board_AR-5387un.patch [deleted file]
target/linux/brcm63xx/patches-4.1/532-board_AR-5381u.patch [deleted file]
target/linux/brcm63xx/patches-4.1/533-board_rta770bw.patch [deleted file]
target/linux/brcm63xx/patches-4.1/534-board_hw556.patch [deleted file]
target/linux/brcm63xx/patches-4.1/535-board_rta770w.patch [deleted file]
target/linux/brcm63xx/patches-4.1/536-board_fast2704.patch [deleted file]
target/linux/brcm63xx/patches-4.1/537-board_fast2504n.patch [deleted file]
target/linux/brcm63xx/patches-4.1/550-MIPS-BCM63XX-remove-leds-and-buttons.patch [deleted file]
target/linux/brcm63xx/patches-4.1/555-board_96318ref.patch [deleted file]
target/linux/brcm63xx/patches-4.1/556-board_96318ref_p300.patch [deleted file]
target/linux/brcm63xx/patches-4.1/557-board_bcm963269bhr.patch [deleted file]
target/linux/brcm63xx/patches-4.1/558-board_AR1004G.patch [deleted file]
target/linux/brcm63xx/patches-4.1/559-board_vw6339gu.patch [deleted file]
target/linux/brcm63xx/patches-4.1/560-board_963268gu_p300.patch [deleted file]
target/linux/brcm63xx/patches-4.1/561-board_WAP-5813n.patch [deleted file]
target/linux/brcm63xx/patches-4.1/562-board_VR-3025u.patch [deleted file]
target/linux/brcm63xx/patches-4.1/563-board_VR-3025un.patch [deleted file]
target/linux/brcm63xx/patches-4.1/564-board_P870HW-51a_v2.patch [deleted file]
target/linux/brcm63xx/patches-4.1/565-board_hw520.patch [deleted file]
target/linux/brcm63xx/patches-4.1/566-board_A4001N.patch [deleted file]
target/linux/brcm63xx/patches-4.1/567-board_dsl-2751b_e1.patch [deleted file]
target/linux/brcm63xx/patches-4.1/568-board_DGND3700v1_3800B.patch [deleted file]
target/linux/brcm63xx/patches-4.1/569-board_homehub2a.patch [deleted file]
target/linux/brcm63xx/patches-4.1/570-board_HG655b.patch [deleted file]
target/linux/brcm63xx/patches-4.1/571-board_fast2704n.patch [deleted file]
target/linux/brcm63xx/patches-4.1/572-board_VR-3026e.patch [deleted file]
target/linux/brcm63xx/patches-4.1/573-board_R5010UNv2.patch [deleted file]
target/linux/brcm63xx/patches-4.1/574-board_HG622.patch [deleted file]
target/linux/brcm63xx/patches-4.1/800-wl_exports.patch [deleted file]
target/linux/brcm63xx/patches-4.1/801-ssb_export_fallback_sprom.patch [deleted file]
target/linux/brcm63xx/patches-4.1/802-rtl8367r_fix_RGMII_support.patch [deleted file]
target/linux/brcm63xx/patches-4.1/803-jffs2-work-around-unaligned-accesses-failing-on-bcm6.patch [deleted file]
target/linux/brcm63xx/patches-4.1/804-bcm63xx_enet_63268_rgmii_ports.patch [deleted file]

diff --git a/target/linux/brcm63xx/config-4.1 b/target/linux/brcm63xx/config-4.1
deleted file mode 100644 (file)
index d61b6e6..0000000
+++ /dev/null
@@ -1,241 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_B53=y
-CONFIG_B53_MMAP_DRIVER=y
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-CONFIG_B53_SPI_DRIVER=y
-# CONFIG_B53_SRAB_DRIVER is not set
-CONFIG_BCM6345_EXT_IRQ=y
-CONFIG_BCM6345_PERIPH_IRQ=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_3368=y
-CONFIG_BCM63XX_CPU_6318=y
-CONFIG_BCM63XX_CPU_63268=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-# CONFIG_BCMA_DEBUG is not set
-# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
-# CONFIG_BCMA_DRIVER_MIPS is not set
-CONFIG_BCMA_DRIVER_PCI=y
-# CONFIG_BCMA_DRIVER_PCI_HOSTMODE is not set
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-# CONFIG_BCMA_HOST_SOC is not set
-CONFIG_BOARD_BCM63XX_DT=y
-CONFIG_BOARD_BCM963XX=y
-CONFIG_BOARD_LIVEBOX=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_BMIPS=y
-CONFIG_CPU_BMIPS32_3300=y
-CONFIG_CPU_BMIPS4350=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_BCM63XX=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-CONFIG_MIPS_L1_CACHE_SHIFT_4=y
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_BMIPS4350=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-4.1/001-4.2-MIPS-Add-support-for-vmlinux.bin-appended-dtb.patch b/target/linux/brcm63xx/patches-4.1/001-4.2-MIPS-Add-support-for-vmlinux.bin-appended-dtb.patch
deleted file mode 100644 (file)
index fa7732b..0000000
+++ /dev/null
@@ -1,112 +0,0 @@
-From 1da8f1798e307fb8422753984339beb00025f97d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 12 Apr 2015 12:24:58 +0200
-Subject: [PATCH] MIPS: Add support for vmlinux.bin appended dtb
-
-Add support for detecting a vmlinux.bin appended dtb and overriding
-the boot arguments to match the UHI interface.
-
-Due to the PERCPU section being empty for !SMP, but still modifying
-the current address by aligning it to the page size, do not define
-it for !SMP builds to allow __appended_dtb to still point to
-the actual end of the data.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: devicetree@vger.kernel.org
-Cc: John Crispin <blogic@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Cc: Florian Fainelli <f.fainelli@gmail.com>
-Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
-Cc: Markos Chandras <markos.chandras@imgtec.com>
-Cc: Andrew Bresticker <abrestic@chromium.org>
-Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
-Cc: Paul Burton <paul.burton@imgtec.com>
-Cc: James Hartley <James.Hartley@imgtec.com>
-Patchwork: https://patchwork.linux-mips.org/patch/9739/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/Kconfig              | 27 +++++++++++++++++++++++++++
- arch/mips/kernel/head.S        | 16 ++++++++++++++++
- arch/mips/kernel/vmlinux.lds.S |  8 +++++++-
- 3 files changed, 50 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2703,6 +2703,33 @@ config BOOT_RAW
-+choice
-+      prompt "Kernel appended dtb support" if OF
-+      default MIPS_NO_APPENDED_DTB
-+
-+      config MIPS_NO_APPENDED_DTB
-+              bool "None"
-+              help
-+                Do not enable appended dtb support.
-+
-+      config MIPS_RAW_APPENDED_DTB
-+              bool "vmlinux.bin"
-+              help
-+                With this option, the boot code will look for a device tree binary
-+                DTB) appended to raw vmlinux.bin (without decompressor).
-+                (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
-+
-+                This is meant as a backward compatibility convenience for those
-+                systems with a bootloader that can't be upgraded to accommodate
-+                the documented boot protocol using a device tree.
-+
-+                Beware that there is very little in terms of protection against
-+                this option being confused by leftover garbage in memory that might
-+                look like a DTB header after a reboot if no actual DTB is appended
-+                to vmlinux.bin.  Do not leave this option active in a production kernel
-+                if you don't intend to always append a DTB.
-+endchoice
-+
- endmenu
- config LOCKDEP_SUPPORT
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -100,6 +100,22 @@ NESTED(kernel_entry, 16, sp)                      # kernel
-       jr      t0
- 0:
-+#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
-+      PTR_LA          t0, __appended_dtb
-+
-+#ifdef CONFIG_CPU_BIG_ENDIAN
-+      li              t1, 0xd00dfeed
-+#else
-+      li              t1, 0xedfe0dd0
-+#endif
-+      lw              t2, (t0)
-+      bne             t1, t2, not_found
-+       nop
-+
-+      move            a1, t0
-+      PTR_LI          a0, -2
-+not_found:
-+#endif
-       PTR_LA          t0, __bss_start         # clear .bss
-       LONG_S          zero, (t0)
-       PTR_LA          t1, __bss_stop - LONGSIZE
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -125,8 +125,14 @@ SECTIONS
-       .exit.data : {
-               EXIT_DATA
-       }
--
-+#ifdef CONFIG_SMP
-       PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
-+#endif
-+#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
-+      __appended_dtb = .;
-+      /* leave space for appended DTB */
-+      . += 0x100000;
-+#endif
-       /*
-        * Align to 64K in attempt to eliminate holes before the
-        * .bss..swapper_pg_dir section at the start of .bss.  This
diff --git a/target/linux/brcm63xx/patches-4.1/002-4.2-irqchip-Move-IRQCHIP_DECLARE-macro-to-include-linux-.patch b/target/linux/brcm63xx/patches-4.1/002-4.2-irqchip-Move-IRQCHIP_DECLARE-macro-to-include-linux-.patch
deleted file mode 100644 (file)
index 83c07e6..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-From 91e20b5040c67c51aad88cf87db4305c5bd7f79d Mon Sep 17 00:00:00 2001
-From: Joel Porquet <joel@porquet.org>
-Date: Thu, 2 Jul 2015 15:32:00 -0400
-Subject: [PATCH] irqchip: Move IRQCHIP_DECLARE macro to
- include/linux/irqchip.h
-
-At the moment the IRQCHIP_DECLARE macro is only declared locally in
-drivers/irqchip/irqchip.h. It prevents from using it directly in arch/*
-directories whenever irqchip drivers only exist there, which happens in a few
-cases (e.g. arc, arm, microblaze and mips).
-
-This patch makes the macro to be globally defined, i.e. in
-include/linux/irqchip.h, and thus usable for arch-specific declarations of
-irqchip drivers. In this way, it is very similar to what clocksource does (ie
-CLOCKSOURCE_OF_DECLARE is defined in include/linux/clocksource.h).
-
-For now, this patch only moves the declaration of the macro
-IRQCHIP_DECLARE to the global header 'include/linux/irqchip.h' and make
-'drivers/irqchip/irqchip.h' include 'include/linux/irqchip.h'. Later, other
-patches will get rid of 'drivers/irqchip/irqchip.h' and modify all the impacted
-irqchip drivers.
-
-Signed-off-by: Joel Porquet <joel@porquet.org>
-Cc: Jason Cooper <jason@lakedaemon.net>
-Link: http://lkml.kernel.org/r/1435865565-14114-1-git-send-email-joel@porquet.org
-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
----
- drivers/irqchip/irqchip.h | 19 +------------------
- include/linux/irqchip.h   | 14 ++++++++++++++
- 2 files changed, 15 insertions(+), 18 deletions(-)
-
---- a/drivers/irqchip/irqchip.h
-+++ b/drivers/irqchip/irqchip.h
-@@ -8,21 +8,4 @@
-  * warranty of any kind, whether express or implied.
-  */
--#ifndef _IRQCHIP_H
--#define _IRQCHIP_H
--
--#include <linux/of.h>
--
--/*
-- * This macro must be used by the different irqchip drivers to declare
-- * the association between their DT compatible string and their
-- * initialization function.
-- *
-- * @name: name that must be unique accross all IRQCHIP_DECLARE of the
-- * same file.
-- * @compstr: compatible string of the irqchip driver
-- * @fn: initialization function
-- */
--#define IRQCHIP_DECLARE(name, compat, fn) OF_DECLARE_2(irqchip, name, compat, fn)
--
--#endif
-+#include <linux/irqchip.h>
---- a/include/linux/irqchip.h
-+++ b/include/linux/irqchip.h
-@@ -11,6 +11,20 @@
- #ifndef _LINUX_IRQCHIP_H
- #define _LINUX_IRQCHIP_H
-+#include <linux/of.h>
-+
-+/*
-+ * This macro must be used by the different irqchip drivers to declare
-+ * the association between their DT compatible string and their
-+ * initialization function.
-+ *
-+ * @name: name that must be unique accross all IRQCHIP_DECLARE of the
-+ * same file.
-+ * @compstr: compatible string of the irqchip driver
-+ * @fn: initialization function
-+ */
-+#define IRQCHIP_DECLARE(name, compat, fn) OF_DECLARE_2(irqchip, name, compat, fn)
-+
- #ifdef CONFIG_IRQCHIP
- void irqchip_init(void);
- #else
diff --git a/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch b/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch
deleted file mode 100644 (file)
index 1be40eb..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From 61dc388f577b6f984797949f32c30021d9ea73dc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 23 Aug 2015 12:16:02 +0200
-Subject: [PATCH V2] spi/bcm63xx-hsspi: add support for dual spi read/write
-
-Add support for dual read/writes on spi-bcm63xx-hsspi. This has been
-tested with a s25fl129p1 dual read capable spi flash, with a nice speed
-improvement:
-
-serial read:
-
-root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192
-2032+0 records in
-2032+0 records out
-real    0m 4.39s
-user    0m 0.00s
-sys     0m 1.55s
-
-dual read:
-
-root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192
-2032+0 records in
-2032+0 records out
-real    0m 3.09s
-user    0m 0.00s
-sys     0m 1.56s
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx-hsspi.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx-hsspi.c
-+++ b/drivers/spi/spi-bcm63xx-hsspi.c
-@@ -76,6 +76,7 @@
- #define HSSPI_FIFO_REG(x)                     (0x200 + (x) * 0x200)
-+#define HSSPI_OP_MULTIBIT                     BIT(11)
- #define HSSPI_OP_CODE_SHIFT                   13
- #define HSSPI_OP_SLEEP                                (0 << HSSPI_OP_CODE_SHIFT)
- #define HSSPI_OP_READ_WRITE                   (1 << HSSPI_OP_CODE_SHIFT)
-@@ -171,9 +172,12 @@ static int bcm63xx_hsspi_do_txrx(struct
-       if (opcode != HSSPI_OP_READ)
-               step_size -= HSSPI_OPCODE_LEN;
--      __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
--                   2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
--                   2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
-+      if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) ||
-+          (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL))
-+              opcode |= HSSPI_OP_MULTIBIT;
-+
-+      __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT |
-+                   1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff,
-                    bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
-       while (pending > 0) {
-@@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct pl
-       master->num_chipselect = 8;
-       master->setup = bcm63xx_hsspi_setup;
-       master->transfer_one_message = bcm63xx_hsspi_transfer_one;
--      master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-+      master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
-+                          SPI_RX_DUAL | SPI_TX_DUAL;
-       master->bits_per_word_mask = SPI_BPW_MASK(8);
-       master->auto_runtime_pm = true;
diff --git a/target/linux/brcm63xx/patches-4.1/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-4.1/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644 (file)
index 63d385b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -177,6 +177,11 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              msleep(100);
- }
- static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-4.1/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-4.1/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644 (file)
index 5b2c03f..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -199,6 +199,11 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              udelay(10);
- }
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -391,7 +391,6 @@ static inline void set_clocks(struct bcm
-       if (is_enabled) {
-               clk_enable(udc->usbh_clk);
-               clk_enable(udc->usbd_clk);
--              udelay(10);
-       } else {
-               clk_disable(udc->usbd_clk);
-               clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-4.1/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-4.1/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644 (file)
index 5d106f8..0000000
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--                 dev-wdt.o dev-usb-usbd.o
-+                 dev-wdt.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_device) {
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      } else {
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      }
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+      if (is_device)
-+              val |= USBH_PRIV_SWAP_USBD_MASK;
-+      else
-+              val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_on)
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      else
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/udc/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
-@@ -40,6 +40,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- #define DRV_MODULE_NAME               "bcm63xx_udc"
-@@ -868,22 +869,7 @@ static void bcm63xx_select_phy_mode(stru
-               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
-       }
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_device) {
--              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      } else {
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      }
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--      if (is_device)
--              val |= USBH_PRIV_SWAP_USBD_MASK;
--      else
--              val &= ~USBH_PRIV_SWAP_USBD_MASK;
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- /**
-@@ -897,14 +883,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--      u32 val, portmask = BIT(udc->pd->port_no);
-+      u32 portmask = BIT(udc->pd->port_no);
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_on)
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      else
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+      bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- /**
diff --git a/target/linux/brcm63xx/patches-4.1/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-4.1/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644 (file)
index 40bbe08..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
-       else
-               val &= ~USBH_PRIV_SWAP_USBD_MASK;
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
-       else
-               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA       ENDN    mmio    descriptor
-+ * 0  0       BE      invalid
-+ * 0  1       BE      LE
-+ * 1  0       BE      BE
-+ * 1  1       BE      invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6348())
-+              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+      else if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-4.1/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-4.1/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644 (file)
index 768dcca..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+config BCM63XX_OHCI
-+      bool
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.1/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-4.1/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644 (file)
index 111d481..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--                 dev-wdt.o dev-usb-usbd.o usb-common.o
-+                 dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ohci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .no_big_frame_no        = 1,
-+      .num_ports              = 1,
-+      .power_on               = bcm63xx_ohci_power_on,
-+      .power_off              = bcm63xx_ohci_power_off,
-+      .power_suspend          = bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+      .name           = "ohci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ohci_resources),
-+      .resource       = ohci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ohci_pdata,
-+              .dma_mask               = &ohci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+              return -ENODEV;
-+
-+      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+      ohci_resources[0].end = ohci_resources[0].start;
-+      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+      return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-4.1/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-4.1/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 2c26482..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -898,6 +899,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-       if (board.has_dsp)
-               bcm63xx_dsp_register(&board.dsp);
diff --git a/target/linux/brcm63xx/patches-4.1/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-4.1/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644 (file)
index bce91e3..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -12,11 +12,18 @@ config BCM63XX_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+config BCM63XX_EHCI
-+      bool
-+      select USB_ARCH_HAS_EHCI
-+      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-4.1/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-4.1/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644 (file)
index 8b1f8d2..0000000
+++ /dev/null
@@ -1,137 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,8 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
--                 dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
-+                 usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ehci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .power_on               = bcm63xx_ehci_power_on,
-+      .power_off              = bcm63xx_ehci_power_off,
-+      .power_suspend          = bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+      .name           = "ehci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ehci_resources),
-+      .resource       = ehci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ehci_pdata,
-+              .dma_mask               = &ehci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              return 0;
-+
-+      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+      ehci_resources[0].end = ehci_resources[0].start;
-+      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+      return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-4.1/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-4.1/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 641a57c..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -899,6 +900,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-       if (board.has_ohci0)
-               bcm63xx_ohci_register();
diff --git a/target/linux/brcm63xx/patches-4.1/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-4.1/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644 (file)
index 6d91129..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-+      .ignore_oc              = 1,
-       .power_on               = bcm63xx_ehci_power_on,
-       .power_off              = bcm63xx_ehci_power_off,
-       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-4.1/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch b/target/linux/brcm63xx/patches-4.1/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
deleted file mode 100644 (file)
index 00dc9c9..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 1 Jul 2011 23:16:47 +0200
-Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- include/linux/spi/flash.h |    5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -2,7 +2,7 @@
- #define LINUX_SPI_FLASH_H
- struct mtd_partition;
--
-+struct mtd_part_parser_data;
- /**
-  * struct flash_platform_data: board-specific flash data
-  * @name: optional flash device name (eg, as used with mtdparts=)
-@@ -10,6 +10,8 @@ struct mtd_partition;
-  * @nr_parts: number of mtd_partitions for static partitoning
-  * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
-  *    with chips that can't be queried for JEDEC or other IDs
-+ * @part_probe_types: optional list of MTD parser names to use for
-+ *    partitioning
-  *
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-@@ -25,6 +27,7 @@ struct flash_platform_data {
-       char            *type;
-+      const char      **part_probe_types;
-       /* we'll likely add more ... use JEDEC IDs, etc */
- };
diff --git a/target/linux/brcm63xx/patches-4.1/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-4.1/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
deleted file mode 100644 (file)
index be62e67..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 16:53:08 +0100
-Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
- platform data
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |    3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -229,7 +229,8 @@ static int m25p_probe(struct spi_device
-       ppdata.of_node = spi->dev.of_node;
--      return mtd_device_parse_register(&nor->mtd, NULL, &ppdata,
-+      return mtd_device_parse_register(&nor->mtd,
-+                      data ? data->part_probe_types : NULL, &ppdata,
-                       data ? data->parts : NULL,
-                       data ? data->nr_parts : 0);
- }
diff --git a/target/linux/brcm63xx/patches-4.1/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-4.1/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
deleted file mode 100644 (file)
index 3877442..0000000
+++ /dev/null
@@ -1,90 +0,0 @@
-From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 17:33:40 +0100
-Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |   29 +++++++++++++++++++++++++++--
- include/linux/spi/flash.h    |    4 ++++
- 2 files changed, 31 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -31,6 +31,7 @@
- struct m25p {
-       struct spi_device       *spi;
-       struct spi_nor          spi_nor;
-+      int                     max_transfer_len;
-       u8                      command[MAX_CMD_SIZE];
- };
-@@ -119,7 +120,7 @@ static inline unsigned int m25p80_rx_nbi
-  * Read an address range from the nor chip.  The address range
-  * may be any size provided it is within the physical boundaries.
-  */
--static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-+static int __m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-                       size_t *retlen, u_char *buf)
- {
-       struct m25p *flash = nor->priv;
-@@ -152,6 +153,29 @@ static int m25p80_read(struct spi_nor *n
-       return 0;
- }
-+static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-+      size_t *retlen, u_char *buf)
-+{
-+      struct m25p *flash = nor->priv;
-+      size_t off;
-+      size_t read_len = flash->max_transfer_len;
-+      size_t part_len;
-+      int ret = 0;
-+
-+      if (!read_len)
-+              return __m25p80_read(nor, from, len, retlen, buf);
-+
-+      *retlen = 0;
-+
-+      for (off = 0; off < len && !ret; off += read_len) {
-+              ret = __m25p80_read(nor, from + off, min(len - off, read_len),
-+                                  &part_len, buf + off);
-+                      *retlen += part_len;
-+      }
-+
-+      return ret;
-+}
-+
- static int m25p80_erase(struct spi_nor *nor, loff_t offset)
- {
-       struct m25p *flash = nor->priv;
-@@ -223,6 +247,9 @@ static int m25p_probe(struct spi_device
-       else
-               flash_name = spi->modalias;
-+      if (data)
-+              flash->max_transfer_len = data->max_transfer_len;
-+
-       ret = spi_nor_scan(nor, flash_name, mode);
-       if (ret)
-               return ret;
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
-  * @part_probe_types: optional list of MTD parser names to use for
-  *    partitioning
-  *
-+ * @max_transfer_len: option maximum read/write length limitation for
-+ *    SPI controllers not able to transfer any length commands.
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-  * help set up the device and its appropriate default partitioning.
-@@ -28,6 +30,8 @@ struct flash_platform_data {
-       char            *type;
-       const char      **part_probe_types;
-+
-+      unsigned int    max_transfer_len;
-       /* we'll likely add more ... use JEDEC IDs, etc */
- };
diff --git a/target/linux/brcm63xx/patches-4.1/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-4.1/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
deleted file mode 100644 (file)
index f615deb..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 19 Jan 2014 12:18:03 +0100
-Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
-
-In the same way as the ohci platform driver allows limiting ports,
-enable the same for ehci. This prevents a mismatch in the available
-ports between ehci/ohci on USB 2.0 controllers.
-
-This is needed if the USB host controller always reports the maximum
-number of ports regardless of the number of available ports (because
-one might be set to be usb device).
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c      | 4 ++++
- drivers/usb/host/ehci-platform.c | 2 ++
- drivers/usb/host/ehci.h          | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 4 files changed, 8 insertions(+)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -665,6 +665,10 @@ int ehci_setup(struct usb_hcd *hcd)
-       /* cache this readonly data; minimize chip reads */
-       ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+      if (ehci->num_ports) {
-+              ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
-+              ehci->hcs_params |= ehci->num_ports;
-+      }
-       ehci->sbrn = HCD_USB2;
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -59,6 +59,9 @@ static int ehci_platform_reset(struct us
-       hcd->has_tt = pdata->has_tt;
-       ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-+      if (pdata->num_ports && pdata->num_ports <= 15)
-+              ehci->num_ports = pdata->num_ports;
-+
-       if (pdata->pre_setup) {
-               retval = pdata->pre_setup(hcd);
-               if (retval < 0)
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -213,6 +213,7 @@ struct ehci_hcd {                  /* one per controlle
-       u32                     command;
-       /* SILICON QUIRKS */
-+      unsigned int            num_ports;
-       unsigned                no_selective_suspend:1;
-       unsigned                has_fsl_port_bug:1; /* FreeScale */
-       unsigned                big_endian_mmio:1;
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -42,6 +42,7 @@ struct usb_hcd;
-  */
- struct usb_ehci_pdata {
-       int             caps_offset;
-+      unsigned int    num_ports;
-       unsigned        has_tt:1;
-       unsigned        has_synopsys_hc_bug:1;
-       unsigned        big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-4.1/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch b/target/linux/brcm63xx/patches-4.1/207-MIPS-BCM63XX-move-device-registration-code-into-its-.patch
deleted file mode 100644 (file)
index 4e5e611..0000000
+++ /dev/null
@@ -1,493 +0,0 @@
-From 5a50cb0d53344a2429831b00925d6183d4d332e1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 03:54:05 +0100
-Subject: [PATCH 40/44] MIPS: BCM63XX: move device registration code into its
- own file
-
-Move device registration code into its own file to allow sharing it
-between board implementations.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Makefile         |   1 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 188 +-------------------------
- arch/mips/bcm63xx/boards/board_common.c   | 215 ++++++++++++++++++++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |   8 ++
- 4 files changed, 223 insertions(+), 183 deletions(-)
- create mode 100644 arch/mips/bcm63xx/boards/board_common.c
- create mode 100644 arch/mips/bcm63xx/boards/board_common.h
-
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
-+obj-y                                 += board_common.o
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -10,35 +10,22 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/string.h>
--#include <linux/platform_device.h>
--#include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
--#include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_nvram.h>
--#include <bcm63xx_dev_pci.h>
--#include <bcm63xx_dev_enet.h>
--#include <bcm63xx_dev_dsp.h>
--#include <bcm63xx_dev_flash.h>
--#include <bcm63xx_dev_hsspi.h>
--#include <bcm63xx_dev_pcmcia.h>
--#include <bcm63xx_dev_spi.h>
--#include <bcm63xx_dev_usb_ehci.h>
--#include <bcm63xx_dev_usb_ohci.h>
--#include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #include <uapi/linux/bcm933xx_hcs.h>
- #define PFX   "board_bcm963xx: "
- #define HCS_OFFSET_128K                       0x20000
--static struct board_info board;
--
- /*
-  * known 3368 boards
-  */
-@@ -711,52 +698,6 @@ static const struct board_info __initcon
- };
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-- * return board name for /proc/cpuinfo
-- */
--const char *board_get_name(void)
--{
--      return board.name;
--}
--
--/*
-  * early init callback, read nvram data from flash and checksum it
-  */
- void __init board_prom_init(void)
-@@ -801,141 +742,16 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              memcpy(&board, bcm963xx_boards[i], sizeof(board));
-+              board_early_setup(bcm963xx_boards[i]);
-               break;
-       }
--      /* bail out if board is not found, will complain later */
--      if (!board.name[0]) {
-+      /* warn if board is not found, will complain later */
-+      if (i == ARRAY_SIZE(bcm963xx_boards)) {
-               char name[17];
-               memcpy(name, board_name, 16);
-               name[16] = 0;
-               printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
-                      name);
--              return;
--      }
--
--      /* setup pin multiplexing depending on board enabled device,
--       * this has to be done this early since PCI init is done
--       * inside arch_initcall */
--      val = 0;
--
--#ifdef CONFIG_PCI
--      if (board.has_pci) {
--              bcm63xx_pci_enabled = 1;
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G2_PCI;
--      }
--#endif
--
--      if (board.has_pccard) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
--      }
--
--      if (board.has_enet0 && !board.enet0.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      if (board.has_enet1 && !board.enet1.use_internal_phy) {
--              if (BCMCPU_IS_6348())
--                      val |= GPIO_MODE_6348_G3_EXT_MII |
--                              GPIO_MODE_6348_G0_EXT_MII;
--      }
--
--      bcm_gpio_writel(val, GPIO_MODE_REG);
--}
--
--/*
-- * second stage init callback, good time to panic if we couldn't
-- * identify on which board we're running since early printk is working
-- */
--void __init board_setup(void)
--{
--      if (!board.name[0])
--              panic("unable to detect bcm963xx board");
--      printk(KERN_INFO PFX "board name: %s\n", board.name);
--
--      /* make sure we're running on expected cpu */
--      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
--              panic("unexpected CPU for bcm963xx board");
--}
--
--static struct gpio_led_platform_data bcm63xx_led_data;
--
--static struct platform_device bcm63xx_gpio_leds = {
--      .name                   = "leds-gpio",
--      .id                     = 0,
--      .dev.platform_data      = &bcm63xx_led_data,
--};
--
--/*
-- * third stage init callback, register all board devices.
-- */
--int __init board_register_devices(void)
--{
--      if (board.has_uart0)
--              bcm63xx_uart_register(0);
--
--      if (board.has_uart1)
--              bcm63xx_uart_register(1);
--
--      if (board.has_pccard)
--              bcm63xx_pcmcia_register();
--
--      if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
--              bcm63xx_enet_register(0, &board.enet0);
--
--      if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
--              bcm63xx_enet_register(1, &board.enet1);
--
--      if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
--              bcm63xx_enetsw_register(&board.enetsw);
--
--      if (board.has_usbd)
--              bcm63xx_usbd_register(&board.usbd);
--
--      if (board.has_ehci0)
--              bcm63xx_ehci_register();
--
--      if (board.has_ohci0)
--              bcm63xx_ohci_register();
--
--      if (board.has_dsp)
--              bcm63xx_dsp_register(&board.dsp);
--
--      /* Generate MAC address for WLAN and register our SPROM,
--       * do this after registering enet devices
--       */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err(PFX "failed to register fallback SPROM\n");
-       }
--#endif
--
--      bcm63xx_spi_register();
--
--      bcm63xx_hsspi_register();
--
--      bcm63xx_flash_register();
--
--      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--      bcm63xx_led_data.leds = board.leds;
--
--      platform_device_register(&bcm63xx_gpio_leds);
--
--      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
--              gpio_request_one(board.ephy_reset_gpio,
--                              board.ephy_reset_gpio_flags, "ephy-reset");
--
--      return 0;
- }
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -0,0 +1,217 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_usbd.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "board: "
-+
-+static struct board_info board;
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }
-+}
-+#endif
-+
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+      return board.name;
-+}
-+
-+/*
-+ * setup board for device registration
-+ */
-+void __init board_early_setup(const struct board_info *target)
-+{
-+      u32 val;
-+
-+      memcpy(&board, target, sizeof(board));
-+
-+      /* setup pin multiplexing depending on board enabled device,
-+       * this has to be done this early since PCI init is done
-+       * inside arch_initcall */
-+      val = 0;
-+
-+#ifdef CONFIG_PCI
-+      if (board.has_pci) {
-+              bcm63xx_pci_enabled = 1;
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G2_PCI;
-+      }
-+#endif
-+
-+      if (board.has_pccard) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+      }
-+
-+      if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+      if (!board.name[0])
-+              panic("unable to detect bcm963xx board");
-+      printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+      /* make sure we're running on expected cpu */
-+      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+              panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+      .name                   = "leds-gpio",
-+      .id                     = 0,
-+      .dev.platform_data      = &bcm63xx_led_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+      if (board.has_uart0)
-+              bcm63xx_uart_register(0);
-+
-+      if (board.has_uart1)
-+              bcm63xx_uart_register(1);
-+
-+      if (board.has_pccard)
-+              bcm63xx_pcmcia_register();
-+
-+      if (board.has_enet0 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+              bcm63xx_enet_register(0, &board.enet0);
-+
-+      if (board.has_enet1 &&
-+          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+              bcm63xx_enet_register(1, &board.enet1);
-+
-+      if (board.has_enetsw &&
-+          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+              bcm63xx_enetsw_register(&board.enetsw);
-+
-+      if (board.has_usbd)
-+              bcm63xx_usbd_register(&board.usbd);
-+
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-+      if (board.has_dsp)
-+              bcm63xx_dsp_register(&board.dsp);
-+
-+      /* Generate MAC address for WLAN and register our SPROM,
-+       * do this after registering enet devices
-+       */
-+#ifdef CONFIG_SSB_PCIHOST
-+      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-+              if (ssb_arch_register_fallback_sprom(
-+                              &bcm63xx_get_fallback_sprom) < 0)
-+                      pr_err(PFX "failed to register fallback SPROM\n");
-+      }
-+#endif
-+
-+      bcm63xx_spi_register();
-+
-+      bcm63xx_hsspi_register();
-+
-+      bcm63xx_flash_register();
-+
-+      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-+      bcm63xx_led_data.leds = board.leds;
-+
-+      platform_device_register(&bcm63xx_gpio_leds);
-+
-+      if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
-+              gpio_request_one(board.ephy_reset_gpio,
-+                              board.ephy_reset_gpio_flags, "ephy-reset");
-+
-+      return 0;
-+}
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -0,0 +1,8 @@
-+#ifndef __BOARD_COMMON_H
-+#define __BOARD_COMMON_H
-+
-+#include <board_bcm963xx.h>
-+
-+void board_early_setup(const struct board_info *board);
-+
-+#endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.1/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch b/target/linux/brcm63xx/patches-4.1/208-MIPS-BCM63XX-pass-a-mac-addresss-allocator-to-board-.patch
deleted file mode 100644 (file)
index 877030f..0000000
+++ /dev/null
@@ -1,100 +0,0 @@
-From 4e9c34a37bd3442b286ba55441bfe22c1ac5b65f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:08:06 +0100
-Subject: [PATCH 41/44] MIPS: BCM63XX: pass a mac addresss allocator to board
- setup
-
-Pass a mac address allocator to board setup code to allow board
-implementations to work with third party bootloaders not using nvram
-for configuration storage.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  3 ++-
- arch/mips/bcm63xx/boards/board_common.c   | 16 ++++++++++------
- arch/mips/bcm63xx/boards/board_common.h   |  3 ++-
- 3 files changed, 14 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -742,7 +742,8 @@ void __init board_prom_init(void)
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
-                       continue;
-               /* copy, board desc array is marked initdata */
--              board_early_setup(bcm963xx_boards[i]);
-+              board_early_setup(bcm963xx_boards[i],
-+                                bcm63xx_nvram_get_mac_address);
-               break;
-       }
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -18,7 +18,6 @@
- #include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
--#include <bcm63xx_nvram.h>
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
-@@ -81,15 +80,20 @@ const char *board_get_name(void)
-       return board.name;
- }
-+static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
-+
- /*
-  * setup board for device registration
-  */
--void __init board_early_setup(const struct board_info *target)
-+void __init board_early_setup(const struct board_info *target,
-+                            int (*get_mac_address)(u8 mac[ETH_ALEN]))
- {
-       u32 val;
-       memcpy(&board, target, sizeof(board));
-+      board_get_mac_address = get_mac_address;
-+
-       /* setup pin multiplexing depending on board enabled device,
-        * this has to be done this early since PCI init is done
-        * inside arch_initcall */
-@@ -162,15 +166,15 @@ int __init board_register_devices(void)
-               bcm63xx_pcmcia_register();
-       if (board.has_enet0 &&
--          !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
-+          !board_get_mac_address(board.enet0.mac_addr))
-               bcm63xx_enet_register(0, &board.enet0);
-       if (board.has_enet1 &&
--          !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-+          !board_get_mac_address(board.enet1.mac_addr))
-               bcm63xx_enet_register(1, &board.enet1);
-       if (board.has_enetsw &&
--          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+          !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-       if (board.has_usbd)
-@@ -189,7 +193,7 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
- #ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               if (ssb_arch_register_fallback_sprom(
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -3,6 +3,7 @@
- #include <board_bcm963xx.h>
--void board_early_setup(const struct board_info *board);
-+void board_early_setup(const struct board_info *board,
-+                     int (*get_mac_address)(u8 mac[ETH_ALEN]));
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.1/302-extended-platform-devices.patch b/target/linux/brcm63xx/patches-4.1/302-extended-platform-devices.patch
deleted file mode 100644 (file)
index 3f5cfc6..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -206,6 +206,9 @@ int __init board_register_devices(void)
-       bcm63xx_hsspi_register();
-+      if (board.num_devs)
-+              platform_add_devices(board.devs, board.num_devs);
-+
-       bcm63xx_flash_register();
-       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -53,6 +53,10 @@ struct board_info {
-       /* External PHY reset GPIO flags from gpio.h */
-       unsigned long ephy_reset_gpio_flags;
-+
-+      /* Additional platform devices */
-+      struct platform_device **devs;
-+      unsigned int    num_devs;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-4.1/303-spi-board-info.patch b/target/linux/brcm63xx/patches-4.1/303-spi-board-info.patch
deleted file mode 100644 (file)
index ece8691..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -12,6 +12,7 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -209,6 +210,9 @@ int __init board_register_devices(void)
-       if (board.num_devs)
-               platform_add_devices(board.devs, board.num_devs);
-+      if (board.num_spis)
-+              spi_register_board_info(board.spis, board.num_spis);
-+
-       bcm63xx_flash_register();
-       bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,6 +57,10 @@ struct board_info {
-       /* Additional platform devices */
-       struct platform_device **devs;
-       unsigned int    num_devs;
-+
-+      /* Additional platform devices */
-+      struct spi_board_info *spis;
-+      unsigned int    num_spis;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-4.1/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-4.1/309-cfe_version_mod.patch
deleted file mode 100644 (file)
index 9a8c106..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -722,10 +722,20 @@ void __init board_prom_init(void)
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
--      if (!memcmp(cfe, "cfe-v", 5))
--              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
--                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
--      else
-+      if (strstarts(cfe, "cfe-")) {
-+              if(cfe[4] == 'v') {
-+                      if(cfe[5] == 'd')
-+                              snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
-+                      else if (cfe[10] > 0)
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
-+                      else
-+                              snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-+                                       cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+              } else {
-+                      snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
-+              }
-+      } else
-               strcpy(cfe_version, "unknown");
-       printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
diff --git a/target/linux/brcm63xx/patches-4.1/310-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-4.1/310-cfe_simplify_detection.patch
deleted file mode 100644 (file)
index e05c91d..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-@@ -1,6 +1,8 @@
- #ifndef BCM63XX_BOARD_H_
- #define BCM63XX_BOARD_H_
-+#include <asm/bootinfo.h>
-+
- const char *board_get_name(void);
- void board_prom_init(void);
-@@ -9,4 +11,8 @@ void board_setup(void);
- int board_register_devices(void);
-+static inline bool bcm63xx_is_cfe_present(void) {
-+      return fw_arg3 == 0x43464531;
-+}
-+
- #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-4.1/311-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-4.1/311-bcm63xxpart_use_cfedetection.patch
deleted file mode 100644 (file)
index 46d9b47..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -35,7 +35,7 @@
- #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
- #include <asm/mach-bcm63xx/bcm963xx_tag.h>
--#include <asm/mach-bcm63xx/board_bcm963xx.h>
-+#include <asm/mach-bcm63xx/bcm63xx_board.h>
- #define BCM63XX_EXTENDED_SIZE 0xBFC00000      /* Extended flash address */
-@@ -43,30 +43,6 @@
- #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
--static int bcm63xx_detect_cfe(struct mtd_info *master)
--{
--      char buf[9];
--      int ret;
--      size_t retlen;
--
--      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      if (ret)
--              return ret;
--
--      if (strncmp("cfe-v", buf, 5) == 0)
--              return 0;
--
--      /* very old CFE's do not have the cfe-v string, so check for magic */
--      ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      return strncmp("CFE1CFE1", buf, 8);
--}
--
- static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
-                                       struct mtd_partition **pparts,
-                                       struct mtd_part_parser_data *data)
-@@ -85,7 +61,7 @@ static int bcm63xx_parse_cfe_partitions(
-       u32 computed_crc;
-       bool rootfs_first = false;
--      if (bcm63xx_detect_cfe(master))
-+      if (!bcm63xx_is_cfe_present())
-               return -EINVAL;
-       cfe_erasesize = max_t(uint32_t, master->erasesize,
diff --git a/target/linux/brcm63xx/patches-4.1/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch b/target/linux/brcm63xx/patches-4.1/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
deleted file mode 100644 (file)
index 4a5b629..0000000
+++ /dev/null
@@ -1,455 +0,0 @@
-From 301744ecbeece89ab3a9d6beef7802fa22598f00 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:53:12 +0100
-Subject: [PATCH 1/5] irqchip: add support for bcm6345-style periphery irq
- controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../brcm,bcm6345-periph-intc.txt                   |   50 +++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-periph.c               |  339 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-periph.h         |   16 +
- 5 files changed, 410 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-periph.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-periph.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-periph-intc.txt
-@@ -0,0 +1,50 @@
-+Broadcom BCM6345 Level 1 periphery interrupt controller
-+
-+This block is a  interrupt controller that is typically connected directly
-+to one of the HW INT lines on each CPU.  Every BCM63XX xDSL chip since
-+BCM6345 has contained this hardware.
-+
-+Key elements of the hardware design include:
-+
-+- 32, 64, or 128 incoming level IRQ lines
-+
-+- All onchip peripherals are wired directly to an L2 input
-+
-+- A separate instance of the register set for each CPU, allowing individual
-+  peripheral IRQs to be routed to any CPU
-+
-+- No atomic mask/unmask operations
-+
-+- No polarity/level/edge settings
-+
-+- No FIFO or priority encoder logic; software is expected to read all
-+  1-4 status words to determine which IRQs are pending
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-periph-intc".
-+- reg: Specifies the base physical address and size of the registers.
-+  Multiple register addresses may be specified, and must match the amount of
-+  parent interrupts.
-+- interrupt-controller: Identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, should be 1.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+  Multiple lines are used to route interrupts to different cpus, with the first
-+  assumed to be for the boot CPU.
-+
-+Example:
-+
-+periph_intc: interrupt-controller@f0406800 {
-+      compatible = "brcm,bcm6345-periph-intc";
-+      reg = <0x10000020 0x10>, <0x10000030 0x10>;
-+
-+      interrupt-controller;
-+      #interrupt-cells = <1>;
-+
-+      interrupt-parent = <&cpu_intc>;
-+      interrupts = <2>, <3>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -75,6 +75,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_PERIPH_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config DW_APB_ICTL
-       bool
-       select GENERIC_IRQ_CHIP
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_MVEBU)               += irq-armada-
- obj-$(CONFIG_ARCH_MXS)                        += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)                   += irq-metag-ext.o
- obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)  += irq-metag.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-periph.c
-@@ -0,0 +1,339 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE     IRQ_INTERNAL_BASE
-+#else
-+#define VIRQ_BASE     0
-+#endif
-+
-+#include "irqchip.h"
-+
-+#define MAX_WORDS     4
-+#define MAX_PARENT_IRQS       2
-+#define IRQS_PER_WORD 32
-+
-+struct intc_block {
-+      int parent_irq;
-+      void __iomem *base;
-+      void __iomem *en_reg[MAX_WORDS];
-+      void __iomem *status_reg[MAX_WORDS];
-+      u32 mask_cache[MAX_WORDS];
-+};
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct intc_block block[MAX_PARENT_IRQS];
-+
-+      int num_words;
-+
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+};
-+
-+static void bcm6345_periph_irq_handle(unsigned int irq, struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      struct intc_block *block;
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_PARENT_IRQS; idx++)
-+              if (irq == data->block[idx].parent_irq)
-+                      block = &data->block[idx];
-+
-+      for (idx = 0; idx < data->num_words; idx++) {
-+              int base = idx * IRQS_PER_WORD;
-+              unsigned long pending;
-+              int hw_irq;
-+
-+              raw_spin_lock(&data->lock);
-+              pending = __raw_readl(block->en_reg[idx]) &
-+                        __raw_readl(block->status_reg[idx]);
-+              raw_spin_unlock(&data->lock);
-+
-+              for_each_set_bit(hw_irq, &pending, IRQS_PER_WORD) {
-+                      int virq;
-+
-+                      virq  = irq_find_mapping(data->domain, base + hw_irq);
-+                      generic_handle_irq(virq);
-+              }
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void __bcm6345_periph_enable(struct intc_block *block, int reg, int bit,
-+                                  bool enable)
-+{
-+      u32 val;
-+
-+      val = __raw_readl(block->en_reg[reg]);
-+      if (enable)
-+              val |= BIT(bit);
-+      else
-+              val &= ~BIT(bit);
-+      __raw_writel(val, block->en_reg[reg]);
-+}
-+
-+static void bcm6345_periph_irq_mask(struct irq_data *data)
-+{
-+      unsigned int i, reg, bit;
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_periph_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      unsigned int i, reg, bit;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      raw_spin_lock(&priv->lock);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (block->mask_cache[reg] & BIT(bit))
-+                      __bcm6345_periph_enable(block, reg, bit, true);
-+              else
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+      }
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+#ifdef CONFIG_SMP
-+static int bcm6345_periph_set_affinity(struct irq_data *data,
-+                                     const struct cpumask *mask, bool force)
-+{
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      struct intc_data *priv = data->domain->host_data;
-+      unsigned int i, reg, bit;
-+      unsigned long flags;
-+      bool enabled;
-+      int cpu;
-+
-+      reg = hwirq / IRQS_PER_WORD;
-+      bit = hwirq % IRQS_PER_WORD;
-+
-+      /* we could route to more than one cpu, but performance
-+         suffers, so fix it to one.
-+       */
-+      cpu = cpumask_any_and(mask, cpu_online_mask);
-+      if (cpu >= nr_cpu_ids)
-+              return -EINVAL;
-+
-+      if (cpu >= MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      if (!priv->block[cpu].parent_irq)
-+              return -EINVAL;
-+
-+      raw_spin_lock_irqsave(&priv->lock, flags);
-+      enabled = !irqd_irq_masked(data);
-+      for (i = 0; i < MAX_PARENT_IRQS; i++) {
-+              struct intc_block *block = &priv->block[i];
-+
-+              if (!block->parent_irq)
-+                      break;
-+
-+              if (i == cpu) {
-+                      block->mask_cache[reg] |= BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, enabled);
-+              } else {
-+                      block->mask_cache[reg] &= ~BIT(bit);
-+                      __bcm6345_periph_enable(block, reg, bit, false);
-+              }
-+      }
-+      raw_spin_unlock_irqrestore(&priv->lock, flags);
-+
-+      return 0;
-+}
-+#endif
-+
-+static int bcm6345_periph_map(struct irq_domain *d, unsigned int irq,
-+                            irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_periph_domain_ops = {
-+      .xlate = irq_domain_xlate_onecell,
-+      .map = bcm6345_periph_map,
-+};
-+
-+static int __init __bcm6345_periph_intc_init(struct device_node *node,
-+                                           int num_blocks, int *irq,
-+                                           void __iomem **base, int num_words)
-+{
-+      struct intc_data *data;
-+      unsigned int i, w, status_offset;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      status_offset = num_words * sizeof(u32);
-+
-+      for (i = 0; i < num_blocks; i++) {
-+              struct intc_block *block = &data->block[i];
-+
-+              block->parent_irq = irq[i];
-+              block->base = base[i];
-+
-+              for (w = 0; w < num_words; w++) {
-+                      int word_offset = sizeof(u32) * ((num_words - w) - 1);
-+
-+                      block->en_reg[w] = base[i] + word_offset;
-+                      block->status_reg[w] = base[i] + status_offset;
-+                      block->status_reg[w] += word_offset;
-+
-+                      /* route all interrupts to line 0 by default */
-+                      if (i == 0)
-+                              block->mask_cache[w] = 0xffffffff;
-+              }
-+
-+              irq_set_handler_data(block->parent_irq, data);
-+              irq_set_chained_handler(block->parent_irq,
-+                                      bcm6345_periph_irq_handle);
-+      }
-+
-+      data->num_words = num_words;
-+
-+      data->chip.name = "bcm6345-periph-intc";
-+      data->chip.irq_mask = bcm6345_periph_irq_mask;
-+      data->chip.irq_unmask = bcm6345_periph_irq_unmask;
-+
-+#ifdef CONFIG_SMP
-+      if (num_blocks > 1)
-+              data->chip.irq_set_affinity = bcm6345_periph_set_affinity;
-+#endif
-+
-+      data->domain = irq_domain_add_simple(node, IRQS_PER_WORD * num_words,
-+                                           VIRQ_BASE,
-+                                           &bcm6345_periph_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -EINVAL;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_periph_intc_init(int num_blocks, int *irq,
-+                                   void __iomem **base, int num_words)
-+{
-+      __bcm6345_periph_intc_init(NULL, num_blocks, irq, base, num_words);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_periph_of_init(struct device_node *node,
-+                                       struct device_node *parent)
-+{
-+      struct resource res;
-+      int num_irqs, ret = -EINVAL;
-+      int irqs[MAX_PARENT_IRQS] = { 0 };
-+      void __iomem *bases[MAX_PARENT_IRQS] = { NULL };
-+      int words = 0;
-+      int i;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (num_irqs < 1 || num_irqs > MAX_PARENT_IRQS)
-+              return -EINVAL;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              resource_size_t size;
-+
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i])
-+                      goto out_unmap;
-+
-+              if (of_address_to_resource(node, i, &res))
-+                      goto out_unmap;
-+
-+              size = resource_size(&res);
-+              switch (size) {
-+              case 8:
-+              case 16:
-+              case 32:
-+                      size = size / 8;
-+                      break;
-+              default:
-+                      goto out_unmap;
-+              }
-+
-+              if (words && words != size) {
-+                      ret = -EINVAL;
-+                      goto out_unmap;
-+              }
-+              words = size;
-+
-+              bases[i] = of_iomap(node, i);
-+              if (!bases[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      ret = __bcm6345_periph_intc_init(node, num_irqs, irqs, bases, words);
-+      if (!ret)
-+              return 0;
-+
-+out_unmap:
-+      for (i = 0; i < num_irqs; i++) {
-+              iounmap(bases[i]);
-+              irq_dispose_mapping(irqs[i]);
-+      }
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_periph_intc, "brcm,bcm6345-periph-intc",
-+              bcm6345_periph_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-periph.h
-@@ -0,0 +1,16 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H
-+
-+void bcm6345_periph_intc_init(int num_blocks, int *irq, void __iomem **base,
-+                            int num_words);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_PERIPH_H */
diff --git a/target/linux/brcm63xx/patches-4.1/321-irqchip-add-support-for-bcm6345-style-external-inter.patch b/target/linux/brcm63xx/patches-4.1/321-irqchip-add-support-for-bcm6345-style-external-inter.patch
deleted file mode 100644 (file)
index 5ee5ee2..0000000
+++ /dev/null
@@ -1,381 +0,0 @@
-From cf908990d4a8ccdb73ee4484aa8cadad379ca314 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:54:27 +0100
-Subject: [PATCH 2/5] irqchip: add support for bcm6345-style external
- interrupt controller
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- .../interrupt-controller/brcm,bcm6345-ext-intc.txt |   29 ++
- drivers/irqchip/Kconfig                            |    4 +
- drivers/irqchip/Makefile                           |    1 +
- drivers/irqchip/irq-bcm6345-ext.c                  |  287 ++++++++++++++++++++
- include/linux/irqchip/irq-bcm6345-ext.h            |   14 +
- 5 files changed, 335 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
- create mode 100644 drivers/irqchip/irq-bcm6345-ext.c
- create mode 100644 include/linux/irqchip/irq-bcm6345-ext.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-ext-intc.txt
-@@ -0,0 +1,29 @@
-+Broadcom BCM6345-style external interrupt controller
-+
-+Required properties:
-+
-+- compatible: Should be "brcm,bcm6345-ext-intc".
-+- reg: Specifies the base physical addresses and size of the registers.
-+- interrupt-controller: identifies the node as an interrupt controller.
-+- #interrupt-cells: Specifies the number of cells needed to encode an interrupt
-+  source, Should be 2.
-+- interrupt-parent: Specifies the phandle to the parent interrupt controller
-+  this one is cascaded from.
-+- interrupts: Specifies the interrupt line(s) in the interrupt-parent controller
-+  node, valid values depend on the type of parent interrupt controller.
-+
-+Optional properties:
-+
-+- brcm,field-width: Size of each field (mask, clear, sense, ...) in bits in the
-+  register. Defaults to 4.
-+
-+Example:
-+
-+ext_intc: interrupt-controller@10000018 {
-+      compatible = "brcm,bcm6345-ext-intc";
-+      interrupt-parent = <&periph_intc>;
-+      #interrupt-cells = <2>;
-+      reg = <0x10000018 0x4>;
-+      interrupt-controller;
-+      interrupts = <24>, <25>, <26>, <27>;
-+};
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -75,6 +75,10 @@ config BRCMSTB_L2_IRQ
-       select GENERIC_IRQ_CHIP
-       select IRQ_DOMAIN
-+config BCM6345_EXT_IRQ
-+      bool
-+      select IRQ_DOMAIN
-+
- config BCM6345_PERIPH_IRQ
-       bool
-       select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_MVEBU)               += irq-armada-
- obj-$(CONFIG_ARCH_MXS)                        += irq-mxs.o
- obj-$(CONFIG_ARCH_TEGRA)              += irq-tegra.o
- obj-$(CONFIG_ARCH_S3C24XX)            += irq-s3c24xx.o
-+obj-$(CONFIG_BCM6345_EXT_IRQ)         += irq-bcm6345-ext.o
- obj-$(CONFIG_BCM6345_PERIPH_IRQ)      += irq-bcm6345-periph.o
- obj-$(CONFIG_DW_APB_ICTL)             += irq-dw-apb-ictl.o
- obj-$(CONFIG_METAG)                   += irq-metag-ext.o
---- /dev/null
-+++ b/drivers/irqchip/irq-bcm6345-ext.c
-@@ -0,0 +1,288 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#include <linux/ioport.h>
-+#include <linux/irq.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/kernel.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+
-+#include "irqchip.h"
-+
-+#ifdef CONFIG_BCM63XX
-+#include <asm/mach-bcm63xx/bcm63xx_irq.h>
-+
-+#define VIRQ_BASE             IRQ_EXTERNAL_BASE
-+#else
-+#define VIRQ_BASE             0
-+#endif
-+
-+#define MAX_IRQS              4
-+
-+#define EXTIRQ_CFG_SENSE      0
-+#define EXTIRQ_CFG_STAT               1
-+#define EXTIRQ_CFG_CLEAR      2
-+#define EXTIRQ_CFG_MASK               3
-+#define EXTIRQ_CFG_BOTHEDGE   4
-+#define EXTIRQ_CFG_LEVELSENSE 5
-+
-+struct intc_data {
-+      struct irq_chip chip;
-+      struct irq_domain *domain;
-+      raw_spinlock_t lock;
-+
-+      int parent_irq[MAX_IRQS];
-+      void __iomem *reg;
-+      int shift;
-+};
-+
-+static void bcm6345_ext_intc_irq_handle(unsigned int irq, struct irq_desc *desc)
-+{
-+      struct intc_data *data = irq_desc_get_handler_data(desc);
-+      struct irq_chip *chip = irq_desc_get_chip(desc);
-+      unsigned int idx;
-+
-+      chained_irq_enter(chip, desc);
-+
-+      for (idx = 0; idx < MAX_IRQS; idx++) {
-+              if (data->parent_irq[idx] != irq)
-+                      continue;
-+
-+              generic_handle_irq(irq_find_mapping(data->domain, idx));
-+      }
-+
-+      chained_irq_exit(chip, desc);
-+}
-+
-+static void bcm6345_ext_intc_irq_ack(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg |= hwirq << (EXTIRQ_CFG_CLEAR * priv->shift);
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_mask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg &= ~(hwirq << (EXTIRQ_CFG_MASK * priv->shift));
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static void bcm6345_ext_intc_irq_unmask(struct irq_data *data)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      u32 reg;
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+      reg |= hwirq << (EXTIRQ_CFG_MASK * priv->shift);
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+}
-+
-+static int bcm6345_ext_intc_set_type(struct irq_data *data,
-+                                   unsigned int flow_type)
-+{
-+      struct intc_data *priv = data->domain->host_data;
-+      irq_hw_number_t hwirq = irqd_to_hwirq(data);
-+      bool levelsense = 0, sense = 0, bothedge = 0;
-+      u32 reg;
-+
-+      flow_type &= IRQ_TYPE_SENSE_MASK;
-+
-+      if (flow_type == IRQ_TYPE_NONE)
-+              flow_type = IRQ_TYPE_LEVEL_LOW;
-+
-+      switch (flow_type) {
-+      case IRQ_TYPE_EDGE_BOTH:
-+              bothedge = 1;
-+              break;
-+
-+      case IRQ_TYPE_EDGE_RISING:
-+              break;
-+
-+      case IRQ_TYPE_EDGE_FALLING:
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_HIGH:
-+              levelsense = 1;
-+              sense = 1;
-+              break;
-+
-+      case IRQ_TYPE_LEVEL_LOW:
-+              levelsense = 1;
-+              break;
-+
-+      default:
-+              pr_err("bogus flow type combination given!\n");
-+              return -EINVAL;
-+      }
-+
-+      raw_spin_lock(&priv->lock);
-+      reg = __raw_readl(priv->reg);
-+
-+      if (levelsense)
-+              reg |= hwirq << (EXTIRQ_CFG_LEVELSENSE * priv->shift);
-+      else
-+              reg &= ~(hwirq << (EXTIRQ_CFG_LEVELSENSE * priv->shift));
-+      if (sense)
-+              reg |= hwirq << (EXTIRQ_CFG_SENSE * priv->shift);
-+      else
-+              reg &= ~(hwirq << (EXTIRQ_CFG_SENSE * priv->shift));
-+      if (bothedge)
-+              reg |= hwirq << (EXTIRQ_CFG_BOTHEDGE * priv->shift);
-+      else
-+              reg &= ~(hwirq << (EXTIRQ_CFG_BOTHEDGE * priv->shift));
-+
-+      __raw_writel(reg, priv->reg);
-+      raw_spin_unlock(&priv->lock);
-+
-+      irqd_set_trigger_type(data, flow_type);
-+      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
-+              __irq_set_handler_locked(data->irq, handle_level_irq);
-+      else
-+              __irq_set_handler_locked(data->irq, handle_edge_irq);
-+
-+      return 0;
-+}
-+
-+static int bcm6345_ext_intc_map(struct irq_domain *d, unsigned int irq,
-+                              irq_hw_number_t hw)
-+{
-+      struct intc_data *priv = d->host_data;
-+
-+      irq_set_chip_and_handler(irq, &priv->chip, handle_level_irq);
-+
-+      return 0;
-+}
-+
-+static const struct irq_domain_ops bcm6345_ext_domain_ops = {
-+      .xlate = irq_domain_xlate_twocell,
-+      .map = bcm6345_ext_intc_map,
-+};
-+
-+static int __init __bcm6345_ext_intc_init(struct device_node *node,
-+                                        int num_irqs, int *irqs,
-+                                        void __iomem *reg, int shift)
-+{
-+      struct intc_data *data;
-+      unsigned int i;
-+      int start = VIRQ_BASE;
-+
-+      data = kzalloc(sizeof(*data), GFP_KERNEL);
-+      if (!data)
-+              return -ENOMEM;
-+
-+      raw_spin_lock_init(&data->lock);
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              data->parent_irq[i] = irqs[i];
-+
-+              irq_set_handler_data(irqs[i], data);
-+              irq_set_chained_handler(irqs[i], bcm6345_ext_intc_irq_handle);
-+      }
-+
-+      data->reg = reg;
-+      data->shift = shift;
-+
-+      data->chip.name = "bcm6345-ext-intc";
-+      data->chip.irq_ack = bcm6345_ext_intc_irq_ack;
-+      data->chip.irq_mask = bcm6345_ext_intc_irq_mask;
-+      data->chip.irq_unmask = bcm6345_ext_intc_irq_unmask;
-+      data->chip.irq_set_type = bcm6345_ext_intc_set_type;
-+
-+      /*
-+       * If we have less than 4 irqs, this is the second controller on
-+       * bcm63xx. So increase the VIRQ start to not overlap with the first
-+       * one, but only do so if we actually use a non-zero start.
-+       *
-+       * This can be removed when bcm63xx has no legacy users anymore.
-+       */
-+      if (start && num_irqs < 4)
-+              start += 4;
-+
-+      data->domain = irq_domain_add_simple(node, num_irqs, start,
-+                                           &bcm6345_ext_domain_ops, data);
-+      if (!data->domain) {
-+              kfree(data);
-+              return -ENOMEM;
-+      }
-+
-+      return 0;
-+}
-+
-+void __init bcm6345_ext_intc_init(int num_irqs, int *irqs, void __iomem *reg,
-+                                int shift)
-+{
-+      __bcm6345_ext_intc_init(NULL, num_irqs, irqs, reg, shift);
-+}
-+
-+#ifdef CONFIG_OF
-+static int __init bcm6345_ext_intc_of_init(struct device_node *node,
-+                                         struct device_node *parent)
-+{
-+      int num_irqs, ret = -EINVAL;
-+      unsigned i;
-+      void __iomem *base;
-+      int irqs[MAX_IRQS] = { 0 };
-+      u32 shift;
-+
-+      num_irqs = of_irq_count(node);
-+
-+      if (!num_irqs || num_irqs > MAX_IRQS)
-+              return -EINVAL;
-+
-+      if (of_property_read_u32(node, "brcm,field-width", &shift))
-+              shift = 4;
-+
-+      for (i = 0; i < num_irqs; i++) {
-+              irqs[i] = irq_of_parse_and_map(node, i);
-+              if (!irqs[i]) {
-+                      ret = -ENOMEM;
-+                      goto out_unmap;
-+              }
-+      }
-+
-+      base = of_iomap(node, 0);
-+      if (!base)
-+              goto out_unmap;
-+
-+      ret = __bcm6345_ext_intc_init(node, num_irqs, irqs, base, shift);
-+      if (!ret)
-+              return 0;
-+out_unmap:
-+      iounmap(base);
-+
-+      for (i = 0; i < num_irqs; i++)
-+              irq_dispose_mapping(irqs[i]);
-+
-+      return ret;
-+}
-+
-+IRQCHIP_DECLARE(bcm6345_ext_intc, "brcm,bcm6345-ext-intc",
-+              bcm6345_ext_intc_of_init);
-+#endif
---- /dev/null
-+++ b/include/linux/irqchip/irq-bcm6345-ext.h
-@@ -0,0 +1,14 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>
-+ */
-+
-+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+#define __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H
-+
-+void bcm6345_ext_intc_init(int n_irqs, int *irqs, void __iomem *reg, int shift);
-+
-+#endif /* __INCLUDE_LINUX_IRQCHIP_IRQ_BCM6345_EXT_H */
diff --git a/target/linux/brcm63xx/patches-4.1/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch b/target/linux/brcm63xx/patches-4.1/322-MIPS-BCM63XX-switch-to-IRQ_DOMAIN.patch
deleted file mode 100644 (file)
index e45ada6..0000000
+++ /dev/null
@@ -1,695 +0,0 @@
-From 86c5d808d660a6aa72cc41d584776fbc8b2736fe Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 14:55:02 +0100
-Subject: [PATCH 5/8] MIPS: BCM63XX: switch to IRQ_DOMAIN
-
-Now that we have working IRQ_DOMAIN drivers for both interrupt controllers,
-switch to using them.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig       |    3 +
- arch/mips/bcm63xx/irq.c |  612 ++++++++---------------------------------------
- 2 files changed, 108 insertions(+), 507 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -197,6 +197,9 @@ config BCM63XX
-       select SYNC_R4K
-       select DMA_NONCOHERENT
-       select IRQ_CPU
-+      select BCM6345_EXT_IRQ
-+      select BCM6345_PERIPH_IRQ
-+      select IRQ_DOMAIN
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_HAS_EARLY_PRINTK
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -12,7 +12,9 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/irq.h>
--#include <linux/spinlock.h>
-+#include <linux/irqchip.h>
-+#include <linux/irqchip/irq-bcm6345-ext.h>
-+#include <linux/irqchip/irq-bcm6345-periph.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -20,544 +22,140 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--
--static DEFINE_SPINLOCK(ipic_lock);
--static DEFINE_SPINLOCK(epic_lock);
--
--static u32 irq_stat_addr[2];
--static u32 irq_mask_addr[2];
--static void (*dispatch_internal)(int cpu);
--static int is_ext_irq_cascaded;
--static unsigned int ext_irq_count;
--static unsigned int ext_irq_start, ext_irq_end;
--static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
--static void (*internal_irq_mask)(struct irq_data *d);
--static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
--
--
--static inline u32 get_ext_irq_perf_reg(int irq)
--{
--      if (irq < 4)
--              return ext_irq_cfg_reg1;
--      return ext_irq_cfg_reg2;
--}
--
--static inline void handle_internal(int intbit)
--{
--      if (is_ext_irq_cascaded &&
--          intbit >= ext_irq_start && intbit <= ext_irq_end)
--              do_IRQ(intbit - ext_irq_start + IRQ_EXTERNAL_BASE);
--      else
--              do_IRQ(intbit + IRQ_INTERNAL_BASE);
--}
--
--static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
--                                   const struct cpumask *m)
--{
--      bool enable = cpu_online(cpu);
--
--#ifdef CONFIG_SMP
--      if (m)
--              enable &= cpumask_test_cpu(cpu, m);
--      else if (irqd_affinity_was_set(d))
--              enable &= cpumask_test_cpu(cpu, d->affinity);
--#endif
--      return enable;
--}
--
--/*
-- * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
-- * prioritize any interrupt relatively to another. the static counter
-- * will resume the loop where it ended the last time we left this
-- * function.
-- */
--
--#define BUILD_IPIC_INTERNAL(width)                                    \
--void __dispatch_internal_##width(int cpu)                             \
--{                                                                     \
--      u32 pending[width / 32];                                        \
--      unsigned int src, tgt;                                          \
--      bool irqs_pending = false;                                      \
--      static unsigned int i[2];                                       \
--      unsigned int *next = &i[cpu];                                   \
--      unsigned long flags;                                            \
--                                                                      \
--      /* read registers in reverse order */                           \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
--              u32 val;                                                \
--                                                                      \
--              val = bcm_readl(irq_stat_addr[cpu] + src * sizeof(u32)); \
--              val &= bcm_readl(irq_mask_addr[cpu] + src * sizeof(u32)); \
--              pending[--tgt] = val;                                   \
--                                                                      \
--              if (val)                                                \
--                      irqs_pending = true;                            \
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--                                                                      \
--      if (!irqs_pending)                                              \
--              return;                                                 \
--                                                                      \
--      while (1) {                                                     \
--              unsigned int to_call = *next;                           \
--                                                                      \
--              *next = (*next + 1) & (width - 1);                      \
--              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
--                      handle_internal(to_call);                       \
--                      break;                                          \
--              }                                                       \
--      }                                                               \
--}                                                                     \
--                                                                      \
--static void __internal_irq_mask_##width(struct irq_data *d)           \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              val &= ~(1 << bit);                                     \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}                                                                     \
--                                                                      \
--static void __internal_irq_unmask_##width(struct irq_data *d,         \
--                                        const struct cpumask *m)      \
--{                                                                     \
--      u32 val;                                                        \
--      unsigned irq = d->irq - IRQ_INTERNAL_BASE;                      \
--      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
--      unsigned bit = irq & 0x1f;                                      \
--      unsigned long flags;                                            \
--      int cpu;                                                        \
--                                                                      \
--      spin_lock_irqsave(&ipic_lock, flags);                           \
--      for_each_present_cpu(cpu) {                                     \
--              if (!irq_mask_addr[cpu])                                \
--                      break;                                          \
--                                                                      \
--              val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
--              if (enable_irq_for_cpu(cpu, d, m))                      \
--                      val |= (1 << bit);                              \
--              else                                                    \
--                      val &= ~(1 << bit);                             \
--              bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
--      }                                                               \
--      spin_unlock_irqrestore(&ipic_lock, flags);                      \
--}
--
--BUILD_IPIC_INTERNAL(32);
--BUILD_IPIC_INTERNAL(64);
--
--asmlinkage void plat_irq_dispatch(void)
--{
--      u32 cause;
--
--      do {
--              cause = read_c0_cause() & read_c0_status() & ST0_IM;
--
--              if (!cause)
--                      break;
--
--              if (cause & CAUSEF_IP7)
--                      do_IRQ(7);
--              if (cause & CAUSEF_IP0)
--                      do_IRQ(0);
--              if (cause & CAUSEF_IP1)
--                      do_IRQ(1);
--              if (cause & CAUSEF_IP2)
--                      dispatch_internal(0);
--              if (is_ext_irq_cascaded) {
--                      if (cause & CAUSEF_IP3)
--                              dispatch_internal(1);
--              } else {
--                      if (cause & CAUSEF_IP3)
--                              do_IRQ(IRQ_EXT_0);
--                      if (cause & CAUSEF_IP4)
--                              do_IRQ(IRQ_EXT_1);
--                      if (cause & CAUSEF_IP5)
--                              do_IRQ(IRQ_EXT_2);
--                      if (cause & CAUSEF_IP6)
--                              do_IRQ(IRQ_EXT_3);
--              }
--      } while (1);
--}
--
--/*
-- * internal IRQs operations: only mask/unmask on PERF irq mask
-- * register.
-- */
--static void bcm63xx_internal_irq_mask(struct irq_data *d)
--{
--      internal_irq_mask(d);
--}
--
--static void bcm63xx_internal_irq_unmask(struct irq_data *d)
--{
--      internal_irq_unmask(d, NULL);
--}
--
--/*
-- * external IRQs operations: mask/unmask and clear on PERF external
-- * irq control register.
-- */
--static void bcm63xx_external_irq_mask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg &= ~EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg &= ~EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
--}
--
--static void bcm63xx_external_irq_unmask(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_MASK_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_MASK(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      if (is_ext_irq_cascaded)
--              internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
--                                  NULL);
--}
--
--static void bcm63xx_external_irq_clear(struct irq_data *d)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      unsigned long flags;
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--
--      if (BCMCPU_IS_6348())
--              reg |= EXTIRQ_CFG_CLEAR_6348(irq % 4);
--      else
--              reg |= EXTIRQ_CFG_CLEAR(irq % 4);
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--}
--
--static int bcm63xx_external_irq_set_type(struct irq_data *d,
--                                       unsigned int flow_type)
--{
--      unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
--      u32 reg, regaddr;
--      int levelsense, sense, bothedge;
--      unsigned long flags;
--
--      flow_type &= IRQ_TYPE_SENSE_MASK;
--
--      if (flow_type == IRQ_TYPE_NONE)
--              flow_type = IRQ_TYPE_LEVEL_LOW;
--
--      levelsense = sense = bothedge = 0;
--      switch (flow_type) {
--      case IRQ_TYPE_EDGE_BOTH:
--              bothedge = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_RISING:
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_EDGE_FALLING:
--              break;
--
--      case IRQ_TYPE_LEVEL_HIGH:
--              levelsense = 1;
--              sense = 1;
--              break;
--
--      case IRQ_TYPE_LEVEL_LOW:
--              levelsense = 1;
--              break;
--
--      default:
--              printk(KERN_ERR "bogus flow type combination given !\n");
--              return -EINVAL;
--      }
--
--      regaddr = get_ext_irq_perf_reg(irq);
--      spin_lock_irqsave(&epic_lock, flags);
--      reg = bcm_perf_readl(regaddr);
--      irq %= 4;
--
--      switch (bcm63xx_get_cpu_id()) {
--      case BCM6348_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE_6348(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE_6348(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
--              break;
--
--      case BCM3368_CPU_ID:
--      case BCM6328_CPU_ID:
--      case BCM6338_CPU_ID:
--      case BCM6345_CPU_ID:
--      case BCM6358_CPU_ID:
--      case BCM6362_CPU_ID:
--      case BCM6368_CPU_ID:
--              if (levelsense)
--                      reg |= EXTIRQ_CFG_LEVELSENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_LEVELSENSE(irq);
--              if (sense)
--                      reg |= EXTIRQ_CFG_SENSE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_SENSE(irq);
--              if (bothedge)
--                      reg |= EXTIRQ_CFG_BOTHEDGE(irq);
--              else
--                      reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
--              break;
--      default:
--              BUG();
--      }
--
--      bcm_perf_writel(reg, regaddr);
--      spin_unlock_irqrestore(&epic_lock, flags);
--
--      irqd_set_trigger_type(d, flow_type);
--      if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
--              __irq_set_handler_locked(d->irq, handle_level_irq);
--      else
--              __irq_set_handler_locked(d->irq, handle_edge_irq);
--
--      return IRQ_SET_MASK_OK_NOCOPY;
--}
--
--#ifdef CONFIG_SMP
--static int bcm63xx_internal_set_affinity(struct irq_data *data,
--                                       const struct cpumask *dest,
--                                       bool force)
--{
--      if (!irqd_irq_disabled(data))
--              internal_irq_unmask(data, dest);
--
--      return 0;
--}
--#endif
--
--static struct irq_chip bcm63xx_internal_irq_chip = {
--      .name           = "bcm63xx_ipic",
--      .irq_mask       = bcm63xx_internal_irq_mask,
--      .irq_unmask     = bcm63xx_internal_irq_unmask,
--};
--
--static struct irq_chip bcm63xx_external_irq_chip = {
--      .name           = "bcm63xx_epic",
--      .irq_ack        = bcm63xx_external_irq_clear,
--
--      .irq_mask       = bcm63xx_external_irq_mask,
--      .irq_unmask     = bcm63xx_external_irq_unmask,
--
--      .irq_set_type   = bcm63xx_external_irq_set_type,
--};
--
--static struct irqaction cpu_ip2_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip2",
--      .flags          = IRQF_NO_THREAD,
--};
--
--#ifdef CONFIG_SMP
--static struct irqaction cpu_ip3_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_ip3",
--      .flags          = IRQF_NO_THREAD,
--};
--#endif
--
--static struct irqaction cpu_ext_cascade_action = {
--      .handler        = no_action,
--      .name           = "cascade_extirq",
--      .flags          = IRQF_NO_THREAD,
--};
--
--static void bcm63xx_init_irq(void)
-+void __init arch_init_irq(void)
- {
--      int irq_bits;
--
--      irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
--      irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
-+      void __iomem *periph_bases[2];
-+      void __iomem *ext_intc_bases[2];
-+      int periph_irq_count, periph_width, ext_irq_count, ext_shift;
-+      int periph_irqs[2] = { 2, 3 };
-+      int ext_irqs[6];
-+
-+      periph_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      periph_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[0] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-+      ext_intc_bases[1] = (void __iomem *)bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM3368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+              periph_bases[0] += PERF_IRQMASK_3368_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_3368;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_3368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_3368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_3368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_3368_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6328_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6328_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+              periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6328_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6328;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6328_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6328_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6328_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6328_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6338_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-+              periph_bases[0] += PERF_IRQMASK_6338_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6338;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6345_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-+              periph_bases[0] += PERF_IRQMASK_6345_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6345;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 4;
-               break;
-       case BCM6348_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
--              irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
--              irq_stat_addr[1] = 0;
--              irq_mask_addr[1] = 0;
--              irq_bits = 32;
--              ext_irq_count = 4;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-+              periph_bases[0] += PERF_IRQMASK_6348_REG;
-+              periph_irq_count = 1;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6348;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = 3;
-+              ext_irqs[1] = 4;
-+              ext_irqs[2] = 5;
-+              ext_irqs[3] = 6;
-+              ext_shift = 5;
-               break;
-       case BCM6358_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
--              irq_bits = 32;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-+              periph_bases[0] += PERF_IRQMASK_6358_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6358_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 1;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6358_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6358_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6358_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
--              irq_bits = 64;
--              ext_irq_count = 4;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+              periph_bases[0] += PERF_IRQMASK_6362_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6362_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6362;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6362_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6362_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6362_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6362_EXT_IRQ3;
-+              ext_shift = 4;
-               break;
-       case BCM6368_CPU_ID:
--              irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
--              irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
--              irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
--              irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
--              irq_bits = 64;
-+              periph_bases[0] += PERF_IRQMASK_6368_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_6368_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 2;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6368;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6368;
-               ext_irq_count = 6;
--              is_ext_irq_cascaded = 1;
--              ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
--              ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
--              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
--              ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
-+              ext_irqs[0] = BCM_6368_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6368_EXT_IRQ1;
-+              ext_irqs[2] = BCM_6368_EXT_IRQ2;
-+              ext_irqs[3] = BCM_6368_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6368_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6368_EXT_IRQ5;
-+              ext_shift = 4;
-               break;
-       default:
-               BUG();
-       }
--      if (irq_bits == 32) {
--              dispatch_internal = __dispatch_internal_32;
--              internal_irq_mask = __internal_irq_mask_32;
--              internal_irq_unmask = __internal_irq_unmask_32;
--      } else {
--              dispatch_internal = __dispatch_internal_64;
--              internal_irq_mask = __internal_irq_mask_64;
--              internal_irq_unmask = __internal_irq_unmask_64;
--      }
--}
--
--void __init arch_init_irq(void)
--{
--      int i;
--
--      bcm63xx_init_irq();
-       mips_cpu_irq_init();
--      for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_internal_irq_chip,
--                                       handle_level_irq);
--
--      for (i = IRQ_EXTERNAL_BASE; i < IRQ_EXTERNAL_BASE + ext_irq_count; ++i)
--              irq_set_chip_and_handler(i, &bcm63xx_external_irq_chip,
--                                       handle_edge_irq);
--
--      if (!is_ext_irq_cascaded) {
--              for (i = 3; i < 3 + ext_irq_count; ++i)
--                      setup_irq(MIPS_CPU_IRQ_BASE + i, &cpu_ext_cascade_action);
--      }
--
--      setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
--#ifdef CONFIG_SMP
--      if (is_ext_irq_cascaded) {
--              setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
--              bcm63xx_internal_irq_chip.irq_set_affinity =
--                      bcm63xx_internal_set_affinity;
--
--              cpumask_clear(irq_default_affinity);
--              cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
--      }
--#endif
-+      bcm6345_periph_intc_init(periph_irq_count, periph_irqs, periph_bases,
-+                               periph_width);
-+      bcm6345_ext_intc_init(4, ext_irqs, ext_intc_bases[0], ext_shift);
-+      if (ext_irq_count > 4)
-+              bcm6345_ext_intc_init(2, &ext_irqs[4], ext_intc_bases[1],
-+                                    ext_shift);
- }
diff --git a/target/linux/brcm63xx/patches-4.1/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch b/target/linux/brcm63xx/patches-4.1/323-MIPS-BCM63XX-wire-up-BCM6358-s-external-interrupts-4.patch
deleted file mode 100644 (file)
index 0796bb5..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 4fd286c3e5a5bebab0391cf1937695b3ed6721a3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Nov 2014 20:20:30 +0100
-Subject: [PATCH 4/5] MIPS: BCM63XX: wire up BCM6358's external interrupts 4
- and 5
-
-Due to the external interrupts being non consecutive, the previous
-implementation did not support them. Now that we treat both registers
-as separate irq controllers, there is no such limitation anymore and
-we can expose them for drivers to use.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           |    5 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
- 3 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -109,11 +109,14 @@ void __init arch_init_irq(void)
-               periph_width = 1;
-               ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6358;
--              ext_irq_count = 4;
-+              ext_intc_bases[1] += PERF_EXTIRQ_CFG_REG2_6358;
-+              ext_irq_count = 6;
-               ext_irqs[0] = BCM_6358_EXT_IRQ0;
-               ext_irqs[1] = BCM_6358_EXT_IRQ1;
-               ext_irqs[2] = BCM_6358_EXT_IRQ2;
-               ext_irqs[3] = BCM_6358_EXT_IRQ3;
-+              ext_irqs[4] = BCM_6358_EXT_IRQ4;
-+              ext_irqs[5] = BCM_6358_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-       case BCM6362_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -895,6 +895,8 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ1             (IRQ_INTERNAL_BASE + 26)
- #define BCM_6358_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6358_EXT_IRQ4             (IRQ_INTERNAL_BASE + 20)
-+#define BCM_6358_EXT_IRQ5             (IRQ_INTERNAL_BASE + 21)
- /*
-  * 6362 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -243,6 +243,7 @@
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
- /* for 6348 only */
diff --git a/target/linux/brcm63xx/patches-4.1/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/brcm63xx/patches-4.1/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
deleted file mode 100644 (file)
index 661abf6..0000000
+++ /dev/null
@@ -1,77 +0,0 @@
-From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:08:36 +0100
-Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
-
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
- 2 files changed, 28 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
- u16 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
-+static u32 bcm63xx_cpu_variant __read_mostly;
-+
- static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
- };
-+u32 bcm63xx_get_cpu_variant(void)
-+{
-+      return bcm63xx_cpu_variant;
-+}
-+
-+EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
-+
- u8 bcm63xx_get_cpu_rev(void)
- {
-       return bcm63xx_cpu_rev;
-@@ -333,6 +342,7 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-       switch (bcm63xx_cpu_id) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -19,6 +19,7 @@
- #define BCM6368_CPU_ID                0x6368
- void __init bcm63xx_cpu_init(void);
-+u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-@@ -82,6 +83,23 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_3368() \
-+      (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6328() \
-+      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6338() \
-+      (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6345() \
-+      (bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6348() \
-+      (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6358() \
-+      (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6362() \
-+      (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6368() \
-+      (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-  * address of these sets do change.
diff --git a/target/linux/brcm63xx/patches-4.1/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/brcm63xx/patches-4.1/331-MIPS-BCM63XX-define-variant-id-field.patch
deleted file mode 100644 (file)
index 2e21c65..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From 3bd8e2535265f06f79ed9c0ad788405441e091dc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:22:41 +0100
-Subject: [PATCH 21/45] MIPS: BCM63XX: define variant id field
-
-Some SoC have a variant id field in the chip id register.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -9,6 +9,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_VARID_SHIFT                       12
-+#define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
- #define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
diff --git a/target/linux/brcm63xx/patches-4.1/332-MIPS-BCM63XX-detect-BCM6328-variants.patch b/target/linux/brcm63xx/patches-4.1/332-MIPS-BCM63XX-detect-BCM6328-variants.patch
deleted file mode 100644 (file)
index faa002e..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From d59120f23279ef62a48d9f94847254b061d0a8b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:30:59 +0100
-Subject: [PATCH 22/45] MIPS: BCM63XX: detect BCM6328 variants
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
- 2 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -305,6 +305,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-       chipid_reg = 0;
-@@ -344,6 +345,7 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-+      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -353,6 +355,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6328_CPU_ID:
-               bcm63xx_regs_base = bcm6328_regs_base;
-               bcm63xx_irqs = bcm6328_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM63281_CPU_ID;
-+              else if (varid == 3)
-+                      bcm63xx_cpu_variant = BCM63283_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6328 variant: %x\n", varid);
-+
-               break;
-       case BCM6338_CPU_ID:
-               bcm63xx_regs_base = bcm6338_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -11,6 +11,8 @@
-  */
- #define BCM3368_CPU_ID                0x3368
- #define BCM6328_CPU_ID                0x6328
-+#define BCM63281_CPU_ID               0x63281
-+#define BCM63283_CPU_ID               0x63283
- #define BCM6338_CPU_ID                0x6338
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
-@@ -85,8 +87,10 @@ static inline u16 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
--#define BCMCPU_VARIANT_IS_6328() \
--      (bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63281() \
-+      (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63283() \
-+      (bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
- #define BCMCPU_VARIANT_IS_6338() \
-       (bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
- #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/brcm63xx/patches-4.1/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/brcm63xx/patches-4.1/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
deleted file mode 100644 (file)
index 62ce12e..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-From 04458c3db8eb79da21ecde40ab36a1dde52bef06 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:33:28 +0100
-Subject: [PATCH 23/45] MIPS: BCM63XX: detect BCM6362 variants
-
----
- arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 11 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -383,6 +383,14 @@ void __init bcm63xx_cpu_init(void)
-       case BCM6362_CPU_ID:
-               bcm63xx_regs_base = bcm6362_regs_base;
-               bcm63xx_irqs = bcm6362_irqs;
-+
-+              if (varid == 1)
-+                      bcm63xx_cpu_variant = BCM6362_CPU_ID;
-+              else if (varid == 2)
-+                      bcm63xx_cpu_variant = BCM6361_CPU_ID;
-+              else
-+                      pr_warn("unknown BCM6362 variant: %x\n", varid);
-+
-               break;
-       case BCM6368_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -17,6 +17,7 @@
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
- #define BCM6358_CPU_ID                0x6358
-+#define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-@@ -99,6 +100,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
- #define BCMCPU_VARIANT_IS_6358() \
-       (bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6361() \
-+      (bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
- #define BCMCPU_VARIANT_IS_6362() \
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/brcm63xx/patches-4.1/334-MIPS-BCM63XX-detect-BCM6368-variants.patch b/target/linux/brcm63xx/patches-4.1/334-MIPS-BCM63XX-detect-BCM6368-variants.patch
deleted file mode 100644 (file)
index a993e23..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From 825cc67e56b5e624a05f6850a86d91508b786848 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:36:56 +0100
-Subject: [PATCH 24/44] MIPS: BCM63XX: detect BCM6368 variants
-
-The DSL-less BCM6368 variant BCM6367 uses a different chip id. Apart
-from missing DSL, there is no difference to BCM6368, so treat it such.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                          | 4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -393,8 +393,12 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       case BCM6368_CPU_ID:
-+      case BCM6369_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
-               bcm63xx_irqs = bcm6368_irqs;
-+
-+              /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-+              bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -20,6 +20,7 @@
- #define BCM6361_CPU_ID                0x6361
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
-+#define BCM6369_CPU_ID                0x6369
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -106,6 +107,8 @@ static inline u16 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
- #define BCMCPU_VARIANT_IS_6368() \
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6369() \
-+      (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-4.1/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/brcm63xx/patches-4.1/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
deleted file mode 100644 (file)
index 3230add..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:05:54 +0100
-Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -41,7 +41,7 @@
-                                       BCM_CB_MEM_SIZE - 1)
- #define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
-                                       BCM_PCIE_MEM_SIZE - 1)
diff --git a/target/linux/brcm63xx/patches-4.1/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/brcm63xx/patches-4.1/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
deleted file mode 100644 (file)
index d6eb54d..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:13:06 +0100
-Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
-
-Different SoCs use different memory windows (and sizes), so don't
-hardcode it.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
- arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
- 2 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -40,10 +40,10 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
--#define BCM_PCIE_MEM_BASE_PA          0x10f00000
--#define BCM_PCIE_MEM_SIZE             (1 * 1024 * 1024)
--#define BCM_PCIE_MEM_END_PA           (BCM_PCIE_MEM_BASE_PA +         \
--                                      BCM_PCIE_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
-+#define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-+                                      BCM_PCIE_MEM_SIZE_6328 - 1)
- /*
-  * Internal registers are accessed through KSEG3
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
- static struct resource bcm_pcie_mem_resource = {
-       .name   = "bcm63xx PCIe memory space",
--      .start  = BCM_PCIE_MEM_BASE_PA,
--      .end    = BCM_PCIE_MEM_END_PA,
-+      .start  = 0,
-+      .end    = 0,
-       .flags  = IORESOURCE_MEM,
- };
-@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
-       /* set bar0 to little endian */
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-       val |= BASEMASK_REMAP_EN;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--      val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-       bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-       register_pci_controller(&bcm63xx_pcie_controller);
-@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      }
-+
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.1/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/brcm63xx/patches-4.1/337-MIPS-BCM63XX-widen-cpuid-field.patch
deleted file mode 100644 (file)
index 0ead82e..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 14:54:51 +0100
-Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
-
----
- arch/mips/bcm63xx/cpu.c                          | 2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
- 2 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
- const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
--u16 bcm63xx_cpu_id __read_mostly;
-+u32 bcm63xx_cpu_id __read_mostly;
- EXPORT_SYMBOL(bcm63xx_cpu_id);
- static u32 bcm63xx_cpu_variant __read_mostly;
-@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
- static unsigned int detect_cpu_clock(void)
- {
--      u16 cpu_id = bcm63xx_get_cpu_id();
-+      u32 cpu_id = bcm63xx_get_cpu_id();
-       switch (cpu_id) {
-       case BCM3368_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -27,7 +27,7 @@ u32 bcm63xx_get_cpu_variant(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
--static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
-+static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
- {
-       switch (cpu_id) {
- #ifdef CONFIG_BCM63XX_CPU_3368
-@@ -69,11 +69,11 @@ static inline u16 __pure __bcm63xx_get_c
-       return cpu_id;
- }
--extern u16 bcm63xx_cpu_id;
-+extern u32 bcm63xx_cpu_id;
--static inline u16 __pure bcm63xx_get_cpu_id(void)
-+static inline u32 __pure bcm63xx_get_cpu_id(void)
- {
--      const u16 cpu_id = bcm63xx_cpu_id;
-+      const u32 cpu_id = bcm63xx_cpu_id;
-       return __bcm63xx_get_cpu_id(cpu_id);
- }
diff --git a/target/linux/brcm63xx/patches-4.1/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/brcm63xx/patches-4.1/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
deleted file mode 100644 (file)
index 9132e42..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:46:26 +0100
-Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
-
-Newer SoCs have 128 bit wide irq registers, thus 128 available internal
-interupts.
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
- arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
- 2 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
-@@ -1,10 +1,12 @@
- #ifndef BCM63XX_IRQ_H_
- #define BCM63XX_IRQ_H_
-+#include <irq.h>
- #include <bcm63xx_cpu.h>
- #define IRQ_INTERNAL_BASE             8
--#define IRQ_EXTERNAL_BASE             100
-+#define NR_INTERNAL_IRQS              128
-+#define IRQ_EXTERNAL_BASE             (IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
- #define IRQ_EXT_0                     (IRQ_EXTERNAL_BASE + 0)
- #define IRQ_EXT_1                     (IRQ_EXTERNAL_BASE + 1)
- #define IRQ_EXT_2                     (IRQ_EXTERNAL_BASE + 2)
---- a/arch/mips/include/asm/mach-bcm63xx/irq.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
-@@ -1,7 +1,7 @@
- #ifndef __ASM_MACH_BCM63XX_IRQ_H
- #define __ASM_MACH_BCM63XX_IRQ_H
--#define NR_IRQS 128
-+#define NR_IRQS 256
- #define MIPS_CPU_IRQ_BASE 0
- #endif
diff --git a/target/linux/brcm63xx/patches-4.1/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.1/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
deleted file mode 100644 (file)
index 277aa70..0000000
+++ /dev/null
@@ -1,735 +0,0 @@
-From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 7 Dec 2013 17:14:17 +0100
-Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
- arch/mips/bcm63xx/dev-flash.c                     |   6 +
- arch/mips/bcm63xx/dev-spi.c                       |   4 +-
- arch/mips/bcm63xx/irq.c                           |  20 +++-
- arch/mips/bcm63xx/reset.c                         |  21 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 12 files changed, 342 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -60,6 +60,11 @@ config BCM63XX_CPU_6368
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-       select BCM63XX_EHCI
-+
-+config BCM63XX_CPU_63268
-+      bool "support 63268 CPU"
-+      select SYS_HAS_CPU_BMIPS4350
-+      select HW_HAS_PCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -712,7 +712,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -133,6 +133,8 @@ static void enetsw_set(struct clk *clk,
-                               CKCTL_6368_SWPKT_USB_EN |
-                               CKCTL_6368_SWPKT_SAR_EN,
-                               enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
-       else
-               return;
-@@ -177,6 +179,8 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-       else
-               return;
-@@ -199,6 +203,8 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
-       else
-               return;
-@@ -225,9 +231,13 @@ static void spi_set(struct clk *clk, int
-               mask = CKCTL_6358_SPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_SPI_EN;
--      else
--              /* BCMCPU_IS_6368 */
-+      else if (BCMCPU_IS_6368())
-               mask = CKCTL_6368_SPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_SPI_EN;
-+      else
-+              return;
-+
-       bcm_hwclock_set(mask, enable);
- }
-@@ -246,6 +256,8 @@ static void hsspi_set(struct clk *clk, i
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-+      else if (BCMCPU_IS_63268())
-+              mask = CKCTL_63268_HSSPI_EN;
-       else
-               return;
-@@ -307,6 +319,8 @@ static void pcie_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
-       else if (BCMCPU_IS_6362())
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
-+      else if (BCMCPU_IS_63268())
-+              bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
- }
- static struct clk clk_pcie = {
-@@ -386,9 +400,11 @@ struct clk *clk_get(struct device *dev,
-               return &clk_periph;
-       if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
-               return &clk_pcm;
--      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
-+      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
-+          !strcmp(id, "ipsec"))
-               return &clk_ipsec;
--      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
-+      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-+          !strcmp(id, "pcie"))
-               return &clk_pcie;
-       return ERR_PTR(-ENOENT);
- }
-@@ -411,6 +427,7 @@ static int __init bcm63xx_clk_init(void)
-               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-               break;
-       case BCM6362_CPU_ID:
-+      case BCM63268_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6362;
-               break;
-       }
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
- };
-+static const unsigned long bcm63268_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(63268)
-+};
-+
-+static const int bcm63268_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(63268)
-+
-+};
-+
- u32 bcm63xx_get_cpu_variant(void)
- {
-       return bcm63xx_cpu_variant;
-@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
-               return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
-       }
-+      case BCM63268_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
-+                              STRAPBUS_63268_FCVO_SHIFT;
-+              switch (mips_pll_fcvo) {
-+              case 0x3:
-+              case 0xe:
-+                      return 320000000;
-+              case 0xa:
-+                      return 333000000;
-+              case 0x2:
-+              case 0xb:
-+              case 0xf:
-+                      return 400000000;
-+              default:
-+                      return 0;
-+              }
-+      }
-       default:
-               panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
-@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-       if (BCMCPU_IS_6345()) {
-@@ -305,6 +335,7 @@ void __init bcm63xx_cpu_init(void)
-       unsigned int tmp;
-       unsigned int cpu = smp_processor_id();
-       u32 chipid_reg;
-+      bool long_chipid = false;
-       u8 __maybe_unused varid = 0;
-       /* soc registers location depends on cpu type */
-@@ -326,6 +357,9 @@ void __init bcm63xx_cpu_init(void)
-               case 0x10:
-                       chipid_reg = BCM_6345_PERF_BASE;
-                       break;
-+              case 0x80:
-+                      long_chipid = true;
-+                      /* fall-through */
-               default:
-                       chipid_reg = BCM_6368_PERF_BASE;
-                       break;
-@@ -333,6 +367,7 @@ void __init bcm63xx_cpu_init(void)
-               break;
-       }
-+
-       /*
-        * really early to panic, but delaying panic would not help since we
-        * will never get any working console
-@@ -342,10 +377,17 @@ void __init bcm63xx_cpu_init(void)
-       /* read out CPU type */
-       tmp = bcm_readl(chipid_reg);
--      bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
--      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-+
-+      if (long_chipid) {
-+              bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
-+              bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
-+      } else {
-+              bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-+              varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      }
-+
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--      varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
-+      bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-       case BCM3368_CPU_ID:
-@@ -400,6 +442,15 @@ void __init bcm63xx_cpu_init(void)
-               /* BCM6369 is a BCM6368 without xDSL, so treat it the same */
-               bcm63xx_cpu_id = BCM6368_CPU_ID;
-               break;
-+      case BCM63168_CPU_ID:
-+      case BCM63169_CPU_ID:
-+      case BCM63268_CPU_ID:
-+      case BCM63269_CPU_ID:
-+              bcm63xx_regs_base = bcm63268_regs_base;
-+              bcm63xx_irqs = bcm63268_irqs;
-+
-+              bcm63xx_cpu_id = BCM63268_CPU_ID;
-+              break;
-       default:
-               panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
-               break;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
-               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
-                       return BCM63XX_FLASH_TYPE_PARALLEL;
-               }
-+      case BCM63268_CPU_ID:
-+              val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
-+              if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
-+                      return BCM63XX_FLASH_TYPE_SERIAL;
-+              else
-+                      return BCM63XX_FLASH_TYPE_NAND;
-       default:
-               return -EINVAL;
-       }
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-               bcm63xx_regs_spi = bcm6348_regs_spi;
-       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
--              BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+              BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268())
-               bcm63xx_regs_spi = bcm6358_regs_spi;
- }
-@@ -85,7 +85,7 @@ int __init bcm63xx_spi_register(void)
-       }
-       if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
--              BCMCPU_IS_6368()) {
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
-               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-               spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
-               spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -150,6 +150,20 @@ void __init arch_init_irq(void)
-               ext_irqs[5] = BCM_6368_EXT_IRQ5;
-               ext_shift = 4;
-               break;
-+      case BCM63268_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_63268_REG(0);
-+              periph_bases[1] += PERF_IRQMASK_63268_REG(1);
-+              periph_irq_count = 2;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_63268;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_63268_EXT_IRQ0;
-+              ext_irqs[1] = BCM_63268_EXT_IRQ1;
-+              ext_irqs[2] = BCM_63268_EXT_IRQ2;
-+              ext_irqs[3] = BCM_63268_EXT_IRQ3;
-+              ext_shift = 4;
-+              break;
-       default:
-               BUG();
-       }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -125,6 +125,20 @@
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
-+#define BCM63268_RESET_ENET   0
-+#define BCM63268_RESET_USBH   SOFTRESET_63268_USBH_MASK
-+#define BCM63268_RESET_USBD   SOFTRESET_63268_USBS_MASK
-+#define BCM63268_RESET_DSL    0
-+#define BCM63268_RESET_SAR    SOFTRESET_63268_SAR_MASK
-+#define BCM63268_RESET_EPHY   0
-+#define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
-+#define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
-+#define BCM63268_RESET_MPI    0
-+#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
-+                               SOFTRESET_63268_PCIE_CORE_MASK)
-+#define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+
- /*
-  * core reset bits
-  */
-@@ -156,6 +170,10 @@ static const u32 bcm6368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(6368)
- };
-+static const u32 bcm63268_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(63268)
-+};
-+
- const u32 *bcm63xx_reset_bits;
- static int reset_reg;
-@@ -182,6 +200,9 @@ static int __init bcm63xx_reset_bits_ini
-       } else if (BCMCPU_IS_6368()) {
-               reset_reg = PERF_SOFTRESET_6368_REG;
-               bcm63xx_reset_bits = bcm6368_reset_bits;
-+      } else if (BCMCPU_IS_63268()) {
-+              reset_reg = PERF_SOFTRESET_63268_REG;
-+              bcm63xx_reset_bits = bcm63268_reset_bits;
-       }
-       return 0;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -21,6 +21,10 @@
- #define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
- #define BCM6369_CPU_ID                0x6369
-+#define BCM63168_CPU_ID               0x63168
-+#define BCM63169_CPU_ID               0x63169
-+#define BCM63268_CPU_ID               0x63268
-+#define BCM63269_CPU_ID               0x63269
- void __init bcm63xx_cpu_init(void);
- u32 bcm63xx_get_cpu_variant(void);
-@@ -61,6 +65,10 @@ static inline u32 __pure __bcm63xx_get_c
- #ifdef CONFIG_BCM63XX_CPU_6368
-               case BCM6368_CPU_ID:
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_63268
-+              case BCM63268_CPU_ID:
-+#endif
-               break;
-       default:
-               unreachable();
-@@ -86,6 +94,7 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_IS_6358()      (bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
- #define BCMCPU_IS_6362()      (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
- #define BCMCPU_IS_6368()      (bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
-+#define BCMCPU_IS_63268()     (bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-@@ -109,6 +118,14 @@ static inline u32 __pure bcm63xx_get_cpu
-       (bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
- #define BCMCPU_VARIANT_IS_6369() \
-       (bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63168() \
-+      (bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63169() \
-+      (bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63268() \
-+      (bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
-+#define BCMCPU_VARIANT_IS_63269() \
-+      (bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
- /*
-  * While registers sets are (mostly) the same across 63xx CPU, base
-@@ -573,6 +590,52 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RNG_BASE             (0xb0004180)
- #define BCM_6368_MISC_BASE            (0xdeadbeef)
-+/*
-+ * 63268 register sets base address
-+ */
-+#define BCM_63268_DSL_LMEM_BASE               (0xdeadbeef)
-+#define BCM_63268_PERF_BASE           (0xb0000000)
-+#define BCM_63268_TIMER_BASE          (0xb0000080)
-+#define BCM_63268_WDT_BASE            (0xb000009c)
-+#define BCM_63268_UART0_BASE          (0xb0000180)
-+#define BCM_63268_UART1_BASE          (0xb00001a0)
-+#define BCM_63268_GPIO_BASE           (0xb00000c0)
-+#define BCM_63268_SPI_BASE            (0xb0000800)
-+#define BCM_63268_HSSPI_BASE          (0xb0001000)
-+#define BCM_63268_UDC0_BASE           (0xdeadbeef)
-+#define BCM_63268_USBDMA_BASE         (0xb000c800)
-+#define BCM_63268_OHCI0_BASE          (0xb0002600)
-+#define BCM_63268_OHCI_PRIV_BASE      (0xdeadbeef)
-+#define BCM_63268_USBH_PRIV_BASE      (0xb0002700)
-+#define BCM_63268_USBD_BASE           (0xb0002400)
-+#define BCM_63268_MPI_BASE            (0xdeadbeef)
-+#define BCM_63268_PCMCIA_BASE         (0xdeadbeef)
-+#define BCM_63268_PCIE_BASE           (0xb06e0000)
-+#define BCM_63268_SDRAM_REGS_BASE     (0xdeadbeef)
-+#define BCM_63268_DSL_BASE            (0xdeadbeef)
-+#define BCM_63268_UBUS_BASE           (0xdeadbeef)
-+#define BCM_63268_ENET0_BASE          (0xdeadbeef)
-+#define BCM_63268_ENET1_BASE          (0xdeadbeef)
-+#define BCM_63268_ENETDMA_BASE                (0xb000d800)
-+#define BCM_63268_ENETDMAC_BASE               (0xb000da00)
-+#define BCM_63268_ENETDMAS_BASE               (0xb000dc00)
-+#define BCM_63268_ENETSW_BASE         (0xb0700000)
-+#define BCM_63268_EHCI0_BASE          (0xb0002500)
-+#define BCM_63268_SDRAM_BASE          (0xdeadbeef)
-+#define BCM_63268_MEMC_BASE           (0xdeadbeef)
-+#define BCM_63268_DDR_BASE            (0xb0003000)
-+#define BCM_63268_M2M_BASE            (0xdeadbeef)
-+#define BCM_63268_ATM_BASE            (0xdeadbeef)
-+#define BCM_63268_XTM_BASE            (0xb0007000)
-+#define BCM_63268_XTMDMA_BASE         (0xb000b800)
-+#define BCM_63268_XTMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_XTMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_PCM_BASE            (0xb000b000)
-+#define BCM_63268_PCMDMA_BASE         (0xb000b800)
-+#define BCM_63268_PCMDMAC_BASE                (0xdeadbeef)
-+#define BCM_63268_PCMDMAS_BASE                (0xdeadbeef)
-+#define BCM_63268_RNG_BASE            (0xdeadbeef)
-+#define BCM_63268_MISC_BASE           (0xb0001800)
- extern const unsigned long *bcm63xx_regs_base;
-@@ -1041,6 +1104,73 @@ enum bcm63xx_irq {
- #define BCM_6368_EXT_IRQ4             (IRQ_INTERNAL_BASE + 24)
- #define BCM_6368_EXT_IRQ5             (IRQ_INTERNAL_BASE + 25)
-+/*
-+ * 63268 irqs
-+ */
-+#define BCM_63268_HIGH_IRQ_BASE               (IRQ_INTERNAL_BASE + 32)
-+#define BCM_63268_VERY_HIGH_IRQ_BASE  (BCM_63268_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_63268_TIMER_IRQ           (IRQ_INTERNAL_BASE + 0)
-+#define BCM_63268_SPI_IRQ             (BCM_63268_VERY_HIGH_IRQ_BASE + 16)
-+#define BCM_63268_UART0_IRQ           (IRQ_INTERNAL_BASE + 5)
-+#define BCM_63268_UART1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_DSL_IRQ             (IRQ_INTERNAL_BASE + 23)
-+#define BCM_63268_UDC0_IRQ            0
-+#define BCM_63268_ENET0_IRQ           0
-+#define BCM_63268_ENET1_IRQ           0
-+#define BCM_63268_ENET_PHY_IRQ                (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_HSSPI_IRQ           (IRQ_INTERNAL_BASE + 6)
-+#define BCM_63268_OHCI0_IRQ           (IRQ_INTERNAL_BASE + 9)
-+#define BCM_63268_EHCI0_IRQ           (IRQ_INTERNAL_BASE + 10)
-+#define BCM_63268_USBD_IRQ            (IRQ_INTERNAL_BASE + 11)
-+#define BCM_63268_USBD_RXDMA0_IRQ     (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_USBD_TXDMA0_IRQ     (BCM_63268_HIGH_IRQ_BASE + 4)
-+#define BCM_63268_USBD_RXDMA1_IRQ     (IRQ_INTERNAL_BASE + 20)
-+#define BCM_63268_USBD_TXDMA1_IRQ     (BCM_63268_HIGH_IRQ_BASE + 5)
-+#define BCM_63268_USBD_RXDMA2_IRQ     (IRQ_INTERNAL_BASE + 21)
-+#define BCM_63268_USBD_TXDMA2_IRQ     (BCM_63268_HIGH_IRQ_BASE + 6)
-+#define BCM_63268_PCMCIA_IRQ          0
-+#define BCM_63268_ENET0_RXDMA_IRQ     0
-+#define BCM_63268_ENET0_TXDMA_IRQ     0
-+#define BCM_63268_ENET1_RXDMA_IRQ     0
-+#define BCM_63268_ENET1_TXDMA_IRQ     0
-+#define BCM_63268_PCI_IRQ             (BCM_63268_HIGH_IRQ_BASE + 8)
-+#define BCM_63268_ATM_IRQ             0
-+#define BCM_63268_ENETSW_RXDMA0_IRQ   (IRQ_INTERNAL_BASE + 1)
-+#define BCM_63268_ENETSW_RXDMA1_IRQ   (IRQ_INTERNAL_BASE + 2)
-+#define BCM_63268_ENETSW_RXDMA2_IRQ   (IRQ_INTERNAL_BASE + 3)
-+#define BCM_63268_ENETSW_RXDMA3_IRQ   (IRQ_INTERNAL_BASE + 4)
-+#define BCM_63268_ENETSW_TXDMA0_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_ENETSW_TXDMA1_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_ENETSW_TXDMA2_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 2)
-+#define BCM_63268_ENETSW_TXDMA3_IRQ   (BCM_63268_VERY_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_XTM_IRQ             (BCM_63268_HIGH_IRQ_BASE + 17)
-+#define BCM_63268_XTM_DMA0_IRQ                (IRQ_INTERNAL_BASE + 26)
-+
-+#define BCM_63268_RING_OSC_IRQ                (BCM_63268_HIGH_IRQ_BASE + 20)
-+#define BCM_63268_WLAN_GPIO_IRQ               (BCM_63268_HIGH_IRQ_BASE + 3)
-+#define BCM_63268_WLAN_IRQ            (IRQ_INTERNAL_BASE + 7)
-+#define BCM_63268_IPSEC_IRQ           (IRQ_INTERNAL_BASE + 8)
-+#define BCM_63268_NAND_IRQ            (BCM_63268_HIGH_IRQ_BASE + 18)
-+#define BCM_63268_PCM_IRQ             (IRQ_INTERNAL_BASE + 13)
-+#define BCM_63268_DG_IRQ              (IRQ_INTERNAL_BASE + 15)
-+#define BCM_63268_EPHY_ENERGY0_IRQ    (IRQ_INTERNAL_BASE + 16)
-+#define BCM_63268_EPHY_ENERGY1_IRQ    (IRQ_INTERNAL_BASE + 17)
-+#define BCM_63268_EPHY_ENERGY2_IRQ    (IRQ_INTERNAL_BASE + 18)
-+#define BCM_63268_EPHY_ENERGY3_IRQ    (IRQ_INTERNAL_BASE + 19)
-+#define BCM_63268_IPSEC_DMA0_IRQ      (IRQ_INTERNAL_BASE + 22)
-+#define BCM_63268_IPSEC_DMA1_IRQ      (BCM_63268_HIGH_IRQ_BASE + 7)
-+#define BCM_63268_FAP0_IRQ            (IRQ_INTERNAL_BASE + 24)
-+#define BCM_63268_FAP1_IRQ            (IRQ_INTERNAL_BASE + 25)
-+#define BCM_63268_PCM_DMA0_IRQ                (BCM_63268_HIGH_IRQ_BASE + 10)
-+#define BCM_63268_PCM_DMA1_IRQ                (BCM_63268_HIGH_IRQ_BASE + 11)
-+#define BCM_63268_DECT0_IRQ           (BCM_63268_HIGH_IRQ_BASE + 0)
-+#define BCM_63268_DECT1_IRQ           (BCM_63268_HIGH_IRQ_BASE + 1)
-+#define BCM_63268_EXT_IRQ0            (BCM_63268_HIGH_IRQ_BASE + 12)
-+#define BCM_63268_EXT_IRQ1            (BCM_63268_HIGH_IRQ_BASE + 13)
-+#define BCM_63268_EXT_IRQ2            (BCM_63268_HIGH_IRQ_BASE + 14)
-+#define BCM_63268_EXT_IRQ3            (BCM_63268_HIGH_IRQ_BASE + 15)
-+
- extern const int *bcm63xx_irqs;
- #define __GEN_CPU_IRQ_TABLE(__cpu)                                    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -22,6 +22,8 @@ static inline unsigned long bcm63xx_gpio
-               return 48;
-       case BCM6368_CPU_ID:
-               return 38;
-+      case BCM63268_CPU_ID:
-+              return 52;
-       case BCM6348_CPU_ID:
-       default:
-               return 37;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -9,6 +9,8 @@
- #define PERF_REV_REG                  0x0
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
-+#define REV_LONG_CHIPID_SHIFT         12
-+#define REV_LONG_CHIPID_MASK          (0xfffff << REV_LONG_CHIPID_SHIFT)
- #define REV_VARID_SHIFT                       12
- #define REV_VARID_MASK                        (0xf << REV_VARID_SHIFT)
- #define REV_REVID_SHIFT                       0
-@@ -211,6 +213,52 @@
-                                       CKCTL_6368_NAND_EN |            \
-                                       CKCTL_6368_IPSEC_EN)
-+#define CKCTL_63268_DISABLE_GLESS     (1 << 0)
-+#define CKCTL_63268_VDSL_QPROC_EN     (1 << 1)
-+#define CKCTL_63268_VDSL_AFE_EN               (1 << 2)
-+#define CKCTL_63268_VDSL_EN           (1 << 3)
-+#define CKCTL_63268_MIPS_EN           (1 << 4)
-+#define CKCTL_63268_WLAN_OCP_EN               (1 << 5)
-+#define CKCTL_63268_DECT_EN           (1 << 6)
-+#define CKCTL_63268_FAP0_EN           (1 << 7)
-+#define CKCTL_63268_FAP1_EN           (1 << 8)
-+#define CKCTL_63268_SAR_EN            (1 << 9)
-+#define CKCTL_63268_ROBOSW_EN         (1 << 10)
-+#define CKCTL_63268_PCM_EN            (1 << 11)
-+#define CKCTL_63268_USBD_EN           (1 << 12)
-+#define CKCTL_63268_USBH_EN           (1 << 13)
-+#define CKCTL_63268_IPSEC_EN          (1 << 14)
-+#define CKCTL_63268_SPI_EN            (1 << 15)
-+#define CKCTL_63268_HSSPI_EN          (1 << 16)
-+#define CKCTL_63268_PCIE_EN           (1 << 17)
-+#define CKCTL_63268_PHYMIPS_EN                (1 << 18)
-+#define CKCTL_63268_GMAC_EN           (1 << 19)
-+#define CKCTL_63268_NAND_EN           (1 << 20)
-+#define CKCTL_63268_TBUS_EN           (1 << 27)
-+#define CKCTL_63268_ROBOSW250_EN      (1 << 31)
-+
-+#define CKCTL_63268_ALL_SAFE_EN               (CKCTL_63268_VDSL_QPROC_EN |    \
-+                                      CKCTL_63268_VDSL_AFE_EN |       \
-+                                      CKCTL_63268_VDSL_EN |           \
-+                                      CKCTL_63268_WLAN_OCP_EN |       \
-+                                      CKCTL_63268_DECT_EN |           \
-+                                      CKCTL_63268_FAP0_EN |           \
-+                                      CKCTL_63268_FAP1_EN |           \
-+                                      CKCTL_63268_SAR_EN |            \
-+                                      CKCTL_63268_ROBOSW_EN |         \
-+                                      CKCTL_63268_PCM_EN |            \
-+                                      CKCTL_63268_USBD_EN |           \
-+                                      CKCTL_63268_USBH_EN |           \
-+                                      CKCTL_63268_IPSEC_EN |          \
-+                                      CKCTL_63268_SPI_EN |            \
-+                                      CKCTL_63268_HSSPI_EN |          \
-+                                      CKCTL_63268_PCIE_EN |           \
-+                                      CKCTL_63268_PHYMIPS_EN |        \
-+                                      CKCTL_63268_GMAC_EN |           \
-+                                      CKCTL_63268_NAND_EN |           \
-+                                      CKCTL_63268_TBUS_EN |           \
-+                                      CKCTL_63268_ROBOSW250_EN)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
-@@ -224,6 +272,7 @@
- #define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
- #define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_63268_REG(x)     (0x20 + (x) * 0x20)
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-@@ -234,6 +283,7 @@
- #define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
- #define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_63268_REG(x)     (0x30 + (x) * 0x20)
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-@@ -244,6 +294,7 @@
- #define PERF_EXTIRQ_CFG_REG_6358      0x14
- #define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
-+#define PERF_EXTIRQ_CFG_REG_63268     0x18
- #define PERF_EXTIRQ_CFG_REG2_6358     0x1c
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
-@@ -274,6 +325,7 @@
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
- #define PERF_SOFTRESET_6368_REG               0x10
-+#define PERF_SOFTRESET_63268_REG      0x10
- #define SOFTRESET_3368_SPI_MASK               (1 << 0)
- #define SOFTRESET_3368_ENET_MASK      (1 << 2)
-@@ -367,6 +419,26 @@
- #define SOFTRESET_6368_USBH_MASK      (1 << 12)
- #define SOFTRESET_6368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_63268_SPI_MASK      (1 << 0)
-+#define SOFTRESET_63268_IPSEC_MASK    (1 << 1)
-+#define SOFTRESET_63268_EPHY_MASK     (1 << 2)
-+#define SOFTRESET_63268_SAR_MASK      (1 << 3)
-+#define SOFTRESET_63268_ENETSW_MASK   (1 << 4)
-+#define SOFTRESET_63268_USBS_MASK     (1 << 5)
-+#define SOFTRESET_63268_USBH_MASK     (1 << 6)
-+#define SOFTRESET_63268_PCM_MASK      (1 << 7)
-+#define SOFTRESET_63268_PCIE_CORE_MASK        (1 << 8)
-+#define SOFTRESET_63268_PCIE_MASK     (1 << 9)
-+#define SOFTRESET_63268_PCIE_EXT_MASK (1 << 10)
-+#define SOFTRESET_63268_WLAN_SHIM_MASK        (1 << 11)
-+#define SOFTRESET_63268_DDR_PHY_MASK  (1 << 12)
-+#define SOFTRESET_63268_FAP0_MASK     (1 << 13)
-+#define SOFTRESET_63268_WLAN_UBUS_MASK        (1 << 14)
-+#define SOFTRESET_63268_DECT_MASK     (1 << 15)
-+#define SOFTRESET_63268_FAP1_MASK     (1 << 16)
-+#define SOFTRESET_63268_PCIE_HARD_MASK        (1 << 17)
-+#define SOFTRESET_63268_GPHY_MASK     (1 << 18)
-+
- /* MIPS PLL control register */
- #define PERF_MIPSPLLCTL_REG           0x34
- #define MIPSPLLCTL_N1_SHIFT           20
-@@ -1366,6 +1438,13 @@
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
-+#define MISC_STRAPBUS_63268_REG               0x14
-+#define STRAPBUS_63268_HSSPI_CLK_FAST (1 << 9)
-+#define STRAPBUS_63268_BOOT_SEL_SERIAL        (1 << 11)
-+#define STRAPBUS_63268_BOOT_SEL_NAND  (0 << 11)
-+#define STRAPBUS_63268_FCVO_SHIFT     21
-+#define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -25,6 +25,7 @@ static inline int is_bcm63xx_internal_re
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-+      case BCM63268_CPU_ID:
-               if (offset >= 0xb0000000 && offset < 0xb1000000)
-                       return 1;
-               break;
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,7 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
-+              BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -276,7 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -297,6 +299,8 @@ bcm63xx_enetsw_register(const struct bcm
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+      else if (BCMCPU_IS_63268())
-+              enetsw_pd.num_ports = ENETSW_PORTS_63268;
-       enetsw_pd.dma_has_sram = true;
-       enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -62,6 +62,7 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT       8
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
- #define ENETSW_RGMII_PORT0    4
diff --git a/target/linux/brcm63xx/patches-4.1/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.1/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
deleted file mode 100644 (file)
index 4e8a090..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 03:22:40 +0100
-Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
-
----
- arch/mips/bcm63xx/reset.c                       | 3 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
- arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
- 3 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -136,7 +136,8 @@
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
- #define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK)
-+                               SOFTRESET_63268_PCIE_CORE_MASK | \
-+                               SOFTRESET_63268_PCIE_HARD_MASK)
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -45,6 +45,11 @@
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
-                                       BCM_PCIE_MEM_SIZE_6328 - 1)
-+#define BCM_PCIE_MEM_BASE_PA_63268    0x11000000
-+#define BCM_PCIE_MEM_SIZE_63268               (15 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_63268     (BCM_PCIE_MEM_BASE_PA_63268 +   \
-+                                      BCM_PCIE_MEM_SIZE_63268 - 1)
-+
- /*
-  * Internal registers are accessed through KSEG3
-  */
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-+      } else if (BCMCPU_IS_63268()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
-       }
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-+      case BCM63268_CPU_ID:
-               return bcm63xx_register_pcie();
-       case BCM3368_CPU_ID:
-       case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.1/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.1/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 1bcaae2..0000000
+++ /dev/null
@@ -1,675 +0,0 @@
-From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 01:24:09 +0100
-Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
-
----
- arch/mips/bcm63xx/Kconfig                         |   5 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
- arch/mips/bcm63xx/clk.c                           |   8 +-
- arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
- arch/mips/bcm63xx/dev-flash.c                     |   3 +
- arch/mips/bcm63xx/dev-spi.c                       |   2 +-
- arch/mips/bcm63xx/irq.c                           |  10 ++
- arch/mips/bcm63xx/prom.c                          |   2 +-
- arch/mips/bcm63xx/reset.c                         |  24 +++++
- arch/mips/bcm63xx/setup.c                         |   5 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
- 13 files changed, 291 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -18,6 +18,11 @@ config BCM63XX_EHCI
-       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+config BCM63XX_CPU_6318
-+      bool "support 6318 CPU"
-+      select SYS_HAS_CPU_BMIPS32_3300
-+      select HW_HAS_PCI
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select SYS_HAS_CPU_BMIPS4350
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -712,7 +712,7 @@ void __init board_prom_init(void)
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-               val = 0x18000000;
-       } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -252,7 +252,9 @@ static void hsspi_set(struct clk *clk, i
- {
-       u32 mask;
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318())
-+              mask = CKCTL_6318_HSSPI_EN;
-+      else if (BCMCPU_IS_6328())
-               mask = CKCTL_6328_HSSPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_HSSPI_EN;
-@@ -417,12 +419,16 @@ void clk_put(struct clk *clk)
- EXPORT_SYMBOL(clk_put);
-+#define HSSPI_PLL_HZ_6318     250000000
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
- static int __init bcm63xx_clk_init(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              clk_hsspi.rate = HSSPI_PLL_HZ_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               clk_hsspi.rate = HSSPI_PLL_HZ_6328;
-               break;
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
-       __GEN_CPU_IRQ_TABLE(3368)
- };
-+static const unsigned long bcm6318_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(6318)
-+};
-+
-+static const int bcm6318_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(6318)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
-       __GEN_CPU_REGS_TABLE(6328)
- };
-@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
-       return bcm63xx_memory_size;
- }
-+#define STRAP_OVERRIDE_BUS_REG                0x0
-+#define OVERRIDE_BUS_MIPS_FREQ_SHIFT  23
-+#define OVERRIDE_BUS_MIPS_FREQ_MASK   (0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
-+
- static unsigned int detect_cpu_clock(void)
- {
-       u32 cpu_id = bcm63xx_get_cpu_id();
-@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
-       case BCM3368_CPU_ID:
-               return 300000000;
-+      case BCM6318_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
-+
-+              pr_info("strap_override_bus = %08x\n", tmp);
-+
-+              mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
-+                              >> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
-+
-+              switch (mips_pll_fcvo) {
-+              case 0:
-+                      return 166000000;
-+              case 1:
-+                      return 400000000;
-+              case 2:
-+                      return 250000000;
-+              case 3:
-+                      return 333000000;
-+              };
-+      }
-       case BCM6328_CPU_ID:
-       {
-               unsigned int tmp, mips_pll_fcvo;
-@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
-+      if (BCMCPU_IS_6318()) {
-+              val = bcm_sdram_readl(SDRAM_CFG_REG);
-+              val = val & SDRAM_CFG_6318_SPACE_MASK;
-+              val >>= SDRAM_CFG_6318_SPACE_SHIFT;
-+              return 1 << (val + 20);
-+      }
-+
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-@@ -343,6 +384,12 @@ void __init bcm63xx_cpu_init(void)
-       switch (current_cpu_type()) {
-       case CPU_BMIPS3300:
-+              if ((read_c0_prid() & 0xff) >= 0x33) {
-+                      /* BCM6318 */
-+                      chipid_reg = BCM_6368_PERF_BASE;
-+                      break;
-+              }
-+
-               if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
-                       __cpu_name[cpu] = "Broadcom BCM6338";
-               /* fall-through */
-@@ -390,6 +437,10 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_variant = bcm63xx_cpu_id;
-       switch (bcm63xx_cpu_id) {
-+      case BCM6318_CPU_ID:
-+              bcm63xx_regs_base = bcm6318_regs_base;
-+              bcm63xx_irqs = bcm6318_irqs;
-+              break;
-       case BCM3368_CPU_ID:
-               bcm63xx_regs_base = bcm3368_regs_base;
-               bcm63xx_irqs = bcm3368_irqs;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
-       u32 val;
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              /* only support serial flash */
-+              return BCM63XX_FLASH_TYPE_SERIAL;
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -70,7 +70,7 @@ static struct platform_device bcm63xx_sp
- int __init bcm63xx_spi_register(void)
- {
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -49,6 +49,19 @@ void __init arch_init_irq(void)
-               ext_irqs[3] = BCM_3368_EXT_IRQ3;
-               ext_shift = 4;
-               break;
-+      case BCM6318_CPU_ID:
-+              periph_bases[0] += PERF_IRQMASK_6318_REG;
-+              periph_irq_count = 1;
-+              periph_width = 4;
-+
-+              ext_intc_bases[0] += PERF_EXTIRQ_CFG_REG_6318;
-+              ext_irq_count = 4;
-+              ext_irqs[0] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[1] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[2] = BCM_6318_EXT_IRQ0;
-+              ext_irqs[3] = BCM_6318_EXT_IRQ0;
-+              ext_shift = 4;
-+              break;
-       case BCM6328_CPU_ID:
-               periph_bases[0] += PERF_IRQMASK_6328_REG(0);
-               periph_bases[1] += PERF_IRQMASK_6328_REG(1);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -68,7 +68,7 @@ void __init prom_init(void)
-                       if (reg & OTP_6328_REG3_TP1_DISABLED)
-                               bmips_smp_enabled = 0;
--              } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-+              } else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-                       bmips_smp_enabled = 0;
-               }
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -43,6 +43,23 @@
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+
-+#define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-+#define BCM6318_RESET_ENET    0
-+#define BCM6318_RESET_USBH    SOFTRESET_6318_USBH_MASK
-+#define BCM6318_RESET_USBD    SOFTRESET_6318_USBS_MASK
-+#define BCM6318_RESET_DSL     0
-+#define BCM6318_RESET_SAR     SOFTRESET_6318_SAR_MASK
-+#define BCM6318_RESET_EPHY    SOFTRESET_6318_EPHY_MASK
-+#define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
-+#define BCM6318_RESET_PCM     0
-+#define BCM6318_RESET_MPI     0
-+#define BCM6318_RESET_PCIE    \
-+                              (SOFTRESET_6318_PCIE_MASK |             \
-+                               SOFTRESET_6318_PCIE_CORE_MASK |        \
-+                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
- #define BCM6328_RESET_USBH    SOFTRESET_6328_USBH_MASK
-@@ -147,6 +164,10 @@ static const u32 bcm3368_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(3368)
- };
-+static const u32 bcm6318_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(6318)
-+};
-+
- static const u32 bcm6328_reset_bits[] = {
-       __GEN_RESET_BITS_TABLE(6328)
- };
-@@ -183,6 +204,9 @@ static int __init bcm63xx_reset_bits_ini
-       if (BCMCPU_IS_3368()) {
-               reset_reg = PERF_SOFTRESET_6358_REG;
-               bcm63xx_reset_bits = bcm3368_reset_bits;
-+      } else if (BCMCPU_IS_6318()) {
-+              reset_reg = PERF_SOFTRESET_6318_REG;
-+              bcm63xx_reset_bits = bcm6318_reset_bits;
-       } else if (BCMCPU_IS_6328()) {
-               reset_reg = PERF_SOFTRESET_6328_REG;
-               bcm63xx_reset_bits = bcm6328_reset_bits;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -72,6 +72,9 @@ void bcm63xx_machine_reboot(void)
-       case BCM3368_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
-               break;
-+      case BCM6318_CPU_ID:
-+              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
-+              break;
-       case BCM6328_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
-               break;
-@@ -111,7 +114,7 @@ void bcm63xx_machine_reboot(void)
-               bcm6348_a1_reboot();
-       printk(KERN_INFO "triggering watchdog soft-reset...\n");
--      if (BCMCPU_IS_6328()) {
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
-               bcm_wdt_writel(1, WDT_SOFTRESET_REG);
-       } else {
-               reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -10,6 +10,7 @@
-  * arm mach-types)
-  */
- #define BCM3368_CPU_ID                0x3368
-+#define BCM6318_CPU_ID                0x6318
- #define BCM6328_CPU_ID                0x6328
- #define BCM63281_CPU_ID               0x63281
- #define BCM63283_CPU_ID               0x63283
-@@ -38,6 +39,10 @@ static inline u32 __pure __bcm63xx_get_c
-               case BCM3368_CPU_ID:
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6318
-+              case BCM6318_CPU_ID:
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
-               case BCM6328_CPU_ID:
- #endif
-@@ -87,6 +92,7 @@ static inline u32 __pure bcm63xx_get_cpu
- }
- #define BCMCPU_IS_3368()      (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#define BCMCPU_IS_6318()      (bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
- #define BCMCPU_IS_6328()      (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
- #define BCMCPU_IS_6338()      (bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
- #define BCMCPU_IS_6345()      (bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
-@@ -98,6 +104,8 @@ static inline u32 __pure bcm63xx_get_cpu
- #define BCMCPU_VARIANT_IS_3368() \
-       (bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
-+#define BCMCPU_VARIANT_IS_6318() \
-+      (bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
- #define BCMCPU_VARIANT_IS_63281() \
-       (bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
- #define BCMCPU_VARIANT_IS_63283() \
-@@ -252,6 +260,56 @@ enum bcm63xx_regs_set {
- #define BCM_3368_MISC_BASE            (0xdeadbeef)
- /*
-+ * 6318 register sets base address
-+ */
-+#define BCM_6318_DSL_LMEM_BASE                (0xdeadbeef)
-+#define BCM_6318_PERF_BASE            (0xb0000000)
-+#define BCM_6318_TIMER_BASE           (0xb0000040)
-+#define BCM_6318_WDT_BASE             (0xb0000068)
-+#define BCM_6318_UART0_BASE           (0xb0000100)
-+#define BCM_6318_UART1_BASE           (0xdeadbeef)
-+#define BCM_6318_GPIO_BASE            (0xb0000080)
-+#define BCM_6318_SPI_BASE             (0xdeadbeef)
-+#define BCM_6318_HSSPI_BASE           (0xb0003000)
-+#define BCM_6318_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6318_USBDMA_BASE          (0xb0006800)
-+#define BCM_6318_OHCI0_BASE           (0xb0005100)
-+#define BCM_6318_OHCI_PRIV_BASE               (0xdeadbeef)
-+#define BCM_6318_USBH_PRIV_BASE               (0xb0005200)
-+#define BCM_6318_USBD_BASE            (0xb0006000)
-+#define BCM_6318_MPI_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMCIA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCIE_BASE            (0xb0010000)
-+#define BCM_6318_SDRAM_REGS_BASE      (0xdeadbeef)
-+#define BCM_6318_DSL_BASE             (0xdeadbeef)
-+#define BCM_6318_UBUS_BASE            (0xdeadbeef)
-+#define BCM_6318_ENET0_BASE           (0xdeadbeef)
-+#define BCM_6318_ENET1_BASE           (0xdeadbeef)
-+#define BCM_6318_ENETDMA_BASE         (0xb0088000)
-+#define BCM_6318_ENETDMAC_BASE                (0xb0088200)
-+#define BCM_6318_ENETDMAS_BASE                (0xb0088400)
-+#define BCM_6318_ENETSW_BASE          (0xb0080000)
-+#define BCM_6318_EHCI0_BASE           (0xb0005000)
-+#define BCM_6318_SDRAM_BASE           (0xb0004000)
-+#define BCM_6318_MEMC_BASE            (0xdeadbeef)
-+#define BCM_6318_DDR_BASE             (0xdeadbeef)
-+#define BCM_6318_M2M_BASE             (0xdeadbeef)
-+#define BCM_6318_ATM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTM_BASE             (0xdeadbeef)
-+#define BCM_6318_XTMDMA_BASE          (0xb000c000)
-+#define BCM_6318_XTMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_XTMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_PCM_BASE             (0xdeadbeef)
-+#define BCM_6318_PCMDMA_BASE          (0xdeadbeef)
-+#define BCM_6318_PCMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6318_PCMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6318_RNG_BASE             (0xdeadbeef)
-+#define BCM_6318_MISC_BASE            (0xb0000280)
-+#define BCM_6318_OTP_BASE             (0xdeadbeef)
-+
-+#define BCM_6318_STRAP_BASE           (0xb0000900)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
-@@ -774,6 +832,55 @@ enum bcm63xx_irq {
- #define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
- #define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+/*
-+ * 6318 irqs
-+ */
-+#define BCM_6318_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
-+#define BCM_6318_VERY_HIGH_IRQ_BASE   (BCM_6318_HIGH_IRQ_BASE + 32)
-+
-+#define BCM_6318_TIMER_IRQ            (IRQ_INTERNAL_BASE + 31)
-+#define BCM_6318_SPI_IRQ              0
-+#define BCM_6318_UART0_IRQ            (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6318_UART1_IRQ            0
-+#define BCM_6318_DSL_IRQ              (IRQ_INTERNAL_BASE + 21)
-+#define BCM_6318_UDC0_IRQ             0
-+#define BCM_6318_ENET0_IRQ            0
-+#define BCM_6318_ENET1_IRQ            0
-+#define BCM_6318_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6318_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
-+#define BCM_6318_OHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 9)
-+#define BCM_6318_EHCI0_IRQ            (BCM_6318_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6318_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6318_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 6)
-+#define BCM_6318_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 7)
-+#define BCM_6318_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 8)
-+#define BCM_6318_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6318_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6318_PCMCIA_IRQ           0
-+#define BCM_6318_ENET0_RXDMA_IRQ      0
-+#define BCM_6318_ENET0_TXDMA_IRQ      0
-+#define BCM_6318_ENET1_RXDMA_IRQ      0
-+#define BCM_6318_ENET1_TXDMA_IRQ      0
-+#define BCM_6318_PCI_IRQ              (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6318_ATM_IRQ              0
-+#define BCM_6318_ENETSW_RXDMA0_IRQ    (BCM_6318_HIGH_IRQ_BASE + 0)
-+#define BCM_6318_ENETSW_RXDMA1_IRQ    (BCM_6318_HIGH_IRQ_BASE + 1)
-+#define BCM_6318_ENETSW_RXDMA2_IRQ    (BCM_6318_HIGH_IRQ_BASE + 2)
-+#define BCM_6318_ENETSW_RXDMA3_IRQ    (BCM_6318_HIGH_IRQ_BASE + 3)
-+#define BCM_6318_ENETSW_TXDMA0_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 10)
-+#define BCM_6318_ENETSW_TXDMA1_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 11)
-+#define BCM_6318_ENETSW_TXDMA2_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 12)
-+#define BCM_6318_ENETSW_TXDMA3_IRQ    (BCM_6318_VERY_HIGH_IRQ_BASE + 13)
-+#define BCM_6318_XTM_IRQ              (BCM_6318_HIGH_IRQ_BASE + 31)
-+#define BCM_6318_XTM_DMA0_IRQ         (BCM_6318_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6318_PCM_DMA0_IRQ         (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6318_PCM_DMA1_IRQ         (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6318_EXT_IRQ0             (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6318_EXT_IRQ1             (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6318_EXT_IRQ2             (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6318_EXT_IRQ3             (IRQ_INTERNAL_BASE + 27)
- /*
-  * 6328 irqs
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -52,6 +52,39 @@
-                                        CKCTL_3368_EMUSB_EN | \
-                                        CKCTL_3368_USBU_EN)
-+#define CKCTL_6318_ADSL_ASB_EN                (1 << 0)
-+#define CKCTL_6318_USB_ASB_EN         (1 << 1)
-+#define CKCTL_6318_MIPS_ASB_EN                (1 << 2)
-+#define CKCTL_6318_PCIE_ASB_EN                (1 << 3)
-+#define CKCTL_6318_PHYMIPS_ASB_EN     (1 << 4)
-+#define CKCTL_6318_ROBOSW_ASB_EN      (1 << 5)
-+#define CKCTL_6318_SAR_ASB_EN         (1 << 6)
-+#define CKCTL_6318_SDR_ASB_EN         (1 << 7)
-+#define CKCTL_6318_SWREG_ASB_EN               (1 << 8)
-+#define CKCTL_6318_PERIPH_ASB_EN      (1 << 9)
-+#define CKCTL_6318_CPUBUS160_EN               (1 << 10)
-+#define CKCTL_6318_ADSL_EN            (1 << 11)
-+#define CKCTL_6318_SAR125_EN          (1 << 12)
-+#define CKCTL_6318_MIPS_EN            (1 << 13)
-+#define CKCTL_6318_PCIE_EN            (1 << 14)
-+#define CKCTL_6318_ROBOSW250_EN               (1 << 16)
-+#define CKCTL_6318_ROBOSW025_EN               (1 << 17)
-+#define CKCTL_6318_SDR_EN             (1 << 19)
-+#define CKCTL_6318_USB_EN             (1 << 20) /* both device and host */
-+#define CKCTL_6318_HSSPI_EN           (1 << 25)
-+#define CKCTL_6318_PCIE25_EN          (1 << 27)
-+#define CKCTL_6318_PHYMIPS_EN         (1 << 28)
-+#define CKCTL_6318_ADSL_AFE_EN                (1 << 29)
-+#define CKCTL_6318_ADSL_QPROC_EN      (1 << 30)
-+
-+#define CKCTL_6318_ALL_SAFE_EN                (CKCTL_6318_PHYMIPS_EN |        \
-+                                      CKCTL_6318_ADSL_QPROC_EN |      \
-+                                      CKCTL_6318_ADSL_AFE_EN |        \
-+                                      CKCTL_6318_ADSL_EN |            \
-+                                      CKCTL_6318_SAR_EN  |            \
-+                                      CKCTL_6318_USB_EN |             \
-+                                      CKCTL_6318_PCIE_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
-@@ -259,12 +292,27 @@
-                                       CKCTL_63268_TBUS_EN |           \
-                                       CKCTL_63268_ROBOSW250_EN)
-+/* UBUS Clock Control register */
-+#define PERF_UB_CKCTL_REG             0x10
-+
-+#define UB_CKCTL_6318_ADSL_EN         (1 << 0)
-+#define UB_CKCTL_6318_ARB_EN          (1 << 1)
-+#define UB_CKCTL_6318_MIPS_EN         (1 << 2)
-+#define UB_CKCTL_6318_PCIE_EN         (1 << 3)
-+#define UB_CKCTL_6318_PERIPH_EN               (1 << 4)
-+#define UB_CKCTL_6318_PHYMIPS_EN      (1 << 5)
-+#define UB_CKCTL_6318_ROBOSW_EN               (1 << 6)
-+#define UB_CKCTL_6318_SAR_EN          (1 << 7)
-+#define UB_CKCTL_6318_SDR_EN          (1 << 8)
-+#define UB_CKCTL_6318_USB_EN          (1 << 9)
-+
- /* System PLL Control register        */
- #define PERF_SYS_PLL_CTL_REG          0x8
- #define SYS_PLL_SOFT_RESET            0x1
- /* Interrupt Mask register */
- #define PERF_IRQMASK_3368_REG         0xc
-+#define PERF_IRQMASK_6318_REG         0x20
- #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
-@@ -276,6 +324,7 @@
- /* Interrupt Status register */
- #define PERF_IRQSTAT_3368_REG         0x10
-+#define PERF_IRQSTAT_6318_REG         0x30
- #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
-@@ -287,6 +336,7 @@
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_3368      0x14
-+#define PERF_EXTIRQ_CFG_REG_6318      0x18
- #define PERF_EXTIRQ_CFG_REG_6328      0x18
- #define PERF_EXTIRQ_CFG_REG_6338      0x14
- #define PERF_EXTIRQ_CFG_REG_6345      0x14
-@@ -321,6 +371,7 @@
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG            0x28
-+#define PERF_SOFTRESET_6318_REG               0x10
- #define PERF_SOFTRESET_6328_REG               0x10
- #define PERF_SOFTRESET_6358_REG               0x34
- #define PERF_SOFTRESET_6362_REG               0x10
-@@ -334,6 +385,18 @@
- #define SOFTRESET_3368_USBS_MASK      (1 << 11)
- #define SOFTRESET_3368_PCM_MASK               (1 << 13)
-+#define SOFTRESET_6318_SPI_MASK               (1 << 0)
-+#define SOFTRESET_6318_EPHY_MASK      (1 << 1)
-+#define SOFTRESET_6318_SAR_MASK               (1 << 2)
-+#define SOFTRESET_6318_ENETSW_MASK    (1 << 3)
-+#define SOFTRESET_6318_USBS_MASK      (1 << 4)
-+#define SOFTRESET_6318_USBH_MASK      (1 << 5)
-+#define SOFTRESET_6318_PCIE_CORE_MASK (1 << 6)
-+#define SOFTRESET_6318_PCIE_MASK      (1 << 7)
-+#define SOFTRESET_6318_PCIE_EXT_MASK  (1 << 8)
-+#define SOFTRESET_6318_PCIE_HARD_MASK (1 << 9)
-+#define SOFTRESET_6318_ADSL_MASK      (1 << 10)
-+
- #define SOFTRESET_6328_SPI_MASK               (1 << 0)
- #define SOFTRESET_6328_EPHY_MASK      (1 << 1)
- #define SOFTRESET_6328_SAR_MASK               (1 << 2)
-@@ -505,8 +568,17 @@
- #define TIMER_IRQSTAT_TIMER1_IR_EN    (1 << 9)
- #define TIMER_IRQSTAT_TIMER2_IR_EN    (1 << 10)
-+#define TIMER_IRQMASK_6318_REG                0x0
-+#define TIMER_IRQSTAT_6318_REG                0x4
-+#define IRQSTATMASK_TIMER0            (1 << 0)
-+#define IRQSTATMASK_TIMER1            (1 << 1)
-+#define IRQSTATMASK_TIMER2            (1 << 2)
-+#define IRQSTATMASK_TIMER3            (1 << 3)
-+#define IRQSTATMASK_WDT                       (1 << 4)
-+
- /* Timer control register */
- #define TIMER_CTLx_REG(x)             (0x4 + (x * 4))
-+#define TIMER_CTRx_6318_REG(x)                (0x8 + (x * 4))
- #define TIMER_CTL0_REG                        0x4
- #define TIMER_CTL1_REG                        0x8
- #define TIMER_CTL2_REG                        0xC
-@@ -1253,6 +1325,8 @@
- #define SDRAM_CFG_32B_MASK            (1 << SDRAM_CFG_32B_SHIFT)
- #define SDRAM_CFG_BANK_SHIFT          13
- #define SDRAM_CFG_BANK_MASK           (1 << SDRAM_CFG_BANK_SHIFT)
-+#define SDRAM_CFG_6318_SPACE_SHIFT    4
-+#define SDRAM_CFG_6318_SPACE_MASK     (0xf << SDRAM_CFG_6318_SPACE_SHIFT)
- #define SDRAM_MBASE_REG                       0xc
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -22,6 +22,7 @@ static inline int is_bcm63xx_internal_re
-               if (offset >= 0xfff00000)
-                       return 1;
-               break;
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_63268())
-               return -ENODEV;
-       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
---- a/arch/mips/bcm63xx/dev-usb-usbd.c
-+++ b/arch/mips/bcm63xx/dev-usb-usbd.c
-@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
-               IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
-       int i;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-               return 0;
-       usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -176,8 +176,8 @@ static int __init register_shared(void)
-       else
-               shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
--              BCMCPU_IS_63268())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+              BCMCPU_IS_6368() || BCMCPU_IS_63268())
-               chan_count = 32;
-       else if (BCMCPU_IS_6345())
-               chan_count = 8;
-@@ -277,8 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
- {
-       int ret;
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
--              !BCMCPU_IS_63268())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
-+              !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return -ENODEV;
-       ret = register_shared();
-@@ -295,7 +295,7 @@ bcm63xx_enetsw_register(const struct bcm
-       memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
-               enetsw_pd.num_ports = ENETSW_PORTS_6328;
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-+              return 50;
-       case BCM6328_CPU_ID:
-               return 32;
-       case BCM3368_CPU_ID:
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
--      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+      if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-4.1/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/brcm63xx/patches-4.1/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
deleted file mode 100644 (file)
index 71044f8..0000000
+++ /dev/null
@@ -1,156 +0,0 @@
-From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 8 Dec 2013 14:17:50 +0100
-Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
-
----
- arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
- arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
- 3 files changed, 34 insertions(+), 14 deletions(-)
-
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -28,7 +28,9 @@
-       [BCM63XX_RESET_PCM]             = BCM## __cpu ##_RESET_PCM,     \
-       [BCM63XX_RESET_MPI]             = BCM## __cpu ##_RESET_MPI,     \
-       [BCM63XX_RESET_PCIE]            = BCM## __cpu ##_RESET_PCIE,    \
--      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT,
-+      [BCM63XX_RESET_PCIE_EXT]        = BCM## __cpu ##_RESET_PCIE_EXT, \
-+      [BCM63XX_RESET_PCIE_CORE]       = BCM## __cpu ##_RESET_PCIE_CORE, \
-+      [BCM63XX_RESET_PCIE_HARD]       = BCM## __cpu ##_RESET_PCIE_HARD,
- #define BCM3368_RESET_SPI     SOFTRESET_3368_SPI_MASK
- #define BCM3368_RESET_ENET    SOFTRESET_3368_ENET_MASK
-@@ -42,6 +44,8 @@
- #define BCM3368_RESET_MPI     SOFTRESET_3368_MPI_MASK
- #define BCM3368_RESET_PCIE    0
- #define BCM3368_RESET_PCIE_EXT        0
-+#define BCM3368_RESET_PCIE_CORE       0
-+#define BCM3368_RESET_PCIE_HARD       0
- #define BCM6318_RESET_SPI     SOFTRESET_6318_SPI_MASK
-@@ -54,11 +58,10 @@
- #define BCM6318_RESET_ENETSW  SOFTRESET_6318_ENETSW_MASK
- #define BCM6318_RESET_PCM     0
- #define BCM6318_RESET_MPI     0
--#define BCM6318_RESET_PCIE    \
--                              (SOFTRESET_6318_PCIE_MASK |             \
--                               SOFTRESET_6318_PCIE_CORE_MASK |        \
--                               SOFTRESET_6318_PCIE_HARD_MASK)
-+#define BCM6318_RESET_PCIE    SOFTRESET_6318_PCIE_MASK
- #define BCM6318_RESET_PCIE_EXT        SOFTRESET_6318_PCIE_EXT_MASK
-+#define BCM6318_RESET_PCIE_CORE       SOFTRESET_6318_PCIE_CORE_MASK
-+#define BCM6318_RESET_PCIE_HARD       SOFTRESET_6318_PCIE_HARD_MASK
- #define BCM6328_RESET_SPI     SOFTRESET_6328_SPI_MASK
- #define BCM6328_RESET_ENET    0
-@@ -70,11 +73,10 @@
- #define BCM6328_RESET_ENETSW  SOFTRESET_6328_ENETSW_MASK
- #define BCM6328_RESET_PCM     SOFTRESET_6328_PCM_MASK
- #define BCM6328_RESET_MPI     0
--#define BCM6328_RESET_PCIE    \
--                              (SOFTRESET_6328_PCIE_MASK |             \
--                               SOFTRESET_6328_PCIE_CORE_MASK |        \
--                               SOFTRESET_6328_PCIE_HARD_MASK)
-+#define BCM6328_RESET_PCIE    SOFTRESET_6328_PCIE_MASK
- #define BCM6328_RESET_PCIE_EXT        SOFTRESET_6328_PCIE_EXT_MASK
-+#define BCM6328_RESET_PCIE_CORE       SOFTRESET_6328_PCIE_CORE_MASK
-+#define BCM6328_RESET_PCIE_HARD       SOFTRESET_6328_PCIE_HARD_MASK
- #define BCM6338_RESET_SPI     SOFTRESET_6338_SPI_MASK
- #define BCM6338_RESET_ENET    SOFTRESET_6338_ENET_MASK
-@@ -88,6 +90,8 @@
- #define BCM6338_RESET_MPI     0
- #define BCM6338_RESET_PCIE    0
- #define BCM6338_RESET_PCIE_EXT        0
-+#define BCM6338_RESET_PCIE_CORE       0
-+#define BCM6338_RESET_PCIE_HARD       0
- #define BCM6348_RESET_SPI     SOFTRESET_6348_SPI_MASK
- #define BCM6348_RESET_ENET    SOFTRESET_6348_ENET_MASK
-@@ -101,6 +105,8 @@
- #define BCM6348_RESET_MPI     0
- #define BCM6348_RESET_PCIE    0
- #define BCM6348_RESET_PCIE_EXT        0
-+#define BCM6348_RESET_PCIE_CORE       0
-+#define BCM6348_RESET_PCIE_HARD       0
- #define BCM6358_RESET_SPI     SOFTRESET_6358_SPI_MASK
- #define BCM6358_RESET_ENET    SOFTRESET_6358_ENET_MASK
-@@ -114,6 +120,8 @@
- #define BCM6358_RESET_MPI     SOFTRESET_6358_MPI_MASK
- #define BCM6358_RESET_PCIE    0
- #define BCM6358_RESET_PCIE_EXT        0
-+#define BCM6358_RESET_PCIE_CORE       0
-+#define BCM6358_RESET_PCIE_HARD       0
- #define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
- #define BCM6362_RESET_ENET    0
-@@ -125,9 +133,10 @@
- #define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
- #define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
- #define BCM6362_RESET_MPI     0
--#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
--                               SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
- #define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
-+#define BCM6362_RESET_PCIE_CORE       SOFTRESET_6362_PCIE_CORE_MASK
-+#define BCM6362_RESET_PCIE_HARD       0
- #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET    0
-@@ -141,6 +150,8 @@
- #define BCM6368_RESET_MPI     SOFTRESET_6368_MPI_MASK
- #define BCM6368_RESET_PCIE    0
- #define BCM6368_RESET_PCIE_EXT        0
-+#define BCM6368_RESET_PCIE_CORE       0
-+#define BCM6368_RESET_PCIE_HARD       0
- #define BCM63268_RESET_SPI    SOFTRESET_63268_SPI_MASK
- #define BCM63268_RESET_ENET   0
-@@ -152,10 +163,10 @@
- #define BCM63268_RESET_ENETSW SOFTRESET_63268_ENETSW_MASK
- #define BCM63268_RESET_PCM    SOFTRESET_63268_PCM_MASK
- #define BCM63268_RESET_MPI    0
--#define BCM63268_RESET_PCIE   (SOFTRESET_63268_PCIE_MASK | \
--                               SOFTRESET_63268_PCIE_CORE_MASK | \
--                               SOFTRESET_63268_PCIE_HARD_MASK)
-+#define BCM63268_RESET_PCIE   SOFTRESET_63268_PCIE_MASK
- #define BCM63268_RESET_PCIE_EXT       SOFTRESET_63268_PCIE_EXT_MASK
-+#define BCM63268_RESET_PCIE_CORE      SOFTRESET_63268_PCIE_CORE_MASK
-+#define BCM63268_RESET_PCIE_HARD      SOFTRESET_63268_PCIE_HARD_MASK
- /*
-  * core reset bits
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
-@@ -14,6 +14,8 @@ enum bcm63xx_core_reset {
-       BCM63XX_RESET_MPI,
-       BCM63XX_RESET_PCIE,
-       BCM63XX_RESET_PCIE_EXT,
-+      BCM63XX_RESET_PCIE_CORE,
-+      BCM63XX_RESET_PCIE_HARD,
- };
- void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
-       /* reset the PCIe core */
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
-+              mdelay(10);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
-+      }
-       mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-       mdelay(10);
diff --git a/target/linux/brcm63xx/patches-4.1/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.1/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
deleted file mode 100644 (file)
index 4ffeac9..0000000
+++ /dev/null
@@ -1,342 +0,0 @@
-From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Dec 2013 20:47:34 +0100
-Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
-
----
- arch/mips/bcm63xx/clk.c                           |  25 ++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
- arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
- arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
- 5 files changed, 184 insertions(+), 29 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -50,6 +50,18 @@ static void bcm_hwclock_set(u32 mask, in
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
- }
-+static void bcm_ub_hwclock_set(u32 mask, int enable)
-+{
-+      u32 reg;
-+
-+      reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
-+      if (enable)
-+              reg |= mask;
-+      else
-+              reg &= ~mask;
-+      bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -317,12 +329,17 @@ static struct clk clk_ipsec = {
- static void pcie_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
-+              bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
-+      }
- }
- static struct clk clk_pcie = {
-@@ -405,7 +422,7 @@ struct clk *clk_get(struct device *dev,
-       if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
-           !strcmp(id, "ipsec"))
-               return &clk_ipsec;
--      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-+      if ((BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
-           !strcmp(id, "pcie"))
-               return &clk_pcie;
-       return ERR_PTR(-ENOENT);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -40,6 +40,12 @@
- #define BCM_CB_MEM_END_PA             (BCM_CB_MEM_BASE_PA +           \
-                                       BCM_CB_MEM_SIZE - 1)
-+#define BCM_PCIE_MEM_BASE_PA_6318     0x10200000
-+#define BCM_PCIE_MEM_SIZE_6318                (1 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA_6318      (BCM_PCIE_MEM_BASE_PA_6318 +    \
-+                                      BCM_PCIE_MEM_SIZE_6318 - 1)
-+
-+
- #define BCM_PCIE_MEM_BASE_PA_6328     0x10f00000
- #define BCM_PCIE_MEM_SIZE_6328                (1 * 1024 * 1024)
- #define BCM_PCIE_MEM_END_PA_6328      (BCM_PCIE_MEM_BASE_PA_6328 +    \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1529,6 +1529,17 @@
-  * _REG relative to RSET_PCIE
-  *************************************************************************/
-+#define PCIE_SPECIFIC_REG             0x188
-+#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT       0
-+#define SPECIFIC_ENDIAN_MODE_BAR1_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT       2
-+#define SPECIFIC_ENDIAN_MODE_BAR2_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT       4
-+#define SPECIFIC_ENDIAN_MODE_BAR3_MASK        (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
-+#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN       0
-+#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
-+#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN       2
-+
- #define PCIE_CONFIG2_REG              0x408
- #define CONFIG2_BAR1_SIZE_EN          1
- #define CONFIG2_BAR1_SIZE_MASK                0xf
-@@ -1574,7 +1585,54 @@
- #define PCIE_RC_INT_C                 (1 << 2)
- #define PCIE_RC_INT_D                 (1 << 3)
--#define PCIE_DEVICE_OFFSET            0x8000
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG       0x400c
-+#define C2P_MEM_WIN_ENDIAN_MODE_MASK  0x3
-+#define C2P_MEM_WIN_ENDIAN_NO_SWAP    0
-+#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
-+#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
-+#define C2P_MEM_WIN_BASE_ADDR_SHIFT   20
-+#define C2P_MEM_WIN_BASE_ADDR_MASK    (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
-+
-+#define PCIE_RC_BAR1_CONFIG_LO_REG    0x402c
-+#define RC_BAR_CFG_LO_SIZE_256MB      0xd
-+#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT        20
-+#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
-+
-+#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
-+#define C2P_BASELIMIT_LIMIT_SHIFT     20
-+#define C2P_BASELIMIT_LIMIT_MASK      (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
-+#define C2P_BASELIMIT_BASE_SHIFT      4
-+#define C2P_BASELIMIT_BASE_MASK               (0xfff << C2P_BASELIMIT_BASE_SHIFT)
-+
-+#define PCIE_UBUS_BAR1_CFG_REMAP_REG  0x4088
-+#define BAR1_CFG_REMAP_OFFSET_SHIFT   20
-+#define BAR1_CFG_REMAP_OFFSET_MASK    (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
-+#define BAR1_CFG_REMAP_ACCESS_EN      1
-+
-+#define PCIE_HARD_DEBUG_REG           0x4204
-+#define HARD_DEBUG_SERDES_IDDQ                (1 << 23)
-+
-+#define PCIE_CPU_INT1_MASK_CLEAR_REG  0x830c
-+#define CPU_INT_PCIE_ERR_ATTN_CPU     (1 << 0)
-+#define CPU_INT_PCIE_INTA             (1 << 1)
-+#define CPU_INT_PCIE_INTB             (1 << 2)
-+#define CPU_INT_PCIE_INTC             (1 << 3)
-+#define CPU_INT_PCIE_INTD             (1 << 4)
-+#define CPU_INT_PCIE_INTR             (1 << 5)
-+#define CPU_INT_PCIE_NMI              (1 << 6)
-+#define CPU_INT_PCIE_UBUS             (1 << 7)
-+#define CPU_INT_IPI                   (1 << 8)
-+
-+#define PCIE_EXT_CFG_INDEX_REG                0x8400
-+#define EXT_CFG_FUNC_NUM_SHIFT                12
-+#define EXT_CFG_FUNC_NUM_MASK         (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
-+#define EXT_CFG_DEV_NUM_SHIFT         15
-+#define EXT_CFG_DEV_NUM_MASK          (0xf << EXT_CFG_DEV_NUM_SHIFT)
-+#define EXT_CFG_BUS_NUM_SHIFT         20
-+#define EXT_CFG_BUS_NUM_MASK          (0xff << EXT_CFG_BUS_NUM_SHIFT)
-+
-+#define PCIE_DEVICE_OFFSET_6318               0x9000
-+#define PCIE_DEVICE_OFFSET_6328               0x8000
- /*************************************************************************
-  * _REG relative to RSET_OTP
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
-@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
-       if (!bcm63xx_pcie_can_access(bus, devfn))
-               return PCIBIOS_DEVICE_NOT_FOUND;
--      if (bus->number == PCIE_BUS_DEVICE)
--              reg += PCIE_DEVICE_OFFSET;
-+      if (bus->number == PCIE_BUS_DEVICE) {
-+              if (BCMCPU_IS_6318())
-+                      reg += PCIE_DEVICE_OFFSET_6318;
-+              else
-+                      reg += PCIE_DEVICE_OFFSET_6328;
-+      }
-       data = bcm_pcie_readl(reg);
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
- void __iomem *pci_iospace_start;
--static void __init bcm63xx_reset_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen1(void)
- {
-       u32 val;
-       u32 reg;
-@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
-       mdelay(200);
- }
--static struct clk *pcie_clk;
--
--static int __init bcm63xx_register_pcie(void)
-+static void __init bcm63xx_reset_pcie_gen2(void)
- {
-       u32 val;
--      /* enable clock */
--      pcie_clk = clk_get(NULL, "pcie");
--      if (IS_ERR_OR_NULL(pcie_clk))
--              return -ENODEV;
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
--      clk_prepare_enable(pcie_clk);
-+      /* reset the PCIe core */
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
-+      mdelay(10);
-+      val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
-+      val &= ~HARD_DEBUG_SERDES_IDDQ;
-+      bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
-+      mdelay(10);
-+      bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
-+      mdelay(200);
-+}
--      bcm63xx_reset_pcie();
-+static void __init bcm63xx_init_pcie_gen1(void)
-+{
-+      u32 val;
-       /* configure the PCIe bridge */
-       val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
-       val |= OPT2_CFG_TYPE1_BD_SEL;
-       bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
-+      /* set bar0 to little endian */
-+      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
-+      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
-+      val |= BASEMASK_REMAP_EN;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
-+      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+}
-+
-+static void __init bcm63xx_init_pcie_gen2(void)
-+{
-+      u32 val;
-+
-+      bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
-+                      CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
-+                      PCIE_CPU_INT1_MASK_CLEAR_REG);
-+
-+      val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
-+      val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
-+             C2P_BASELIMIT_BASE_SHIFT;
-+
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
-+
-+      /* set bar0 to little endian */
-+      val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+      val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
-+      val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
-+      bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
-+
-+      bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
-+      bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
-+      bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
-+
-+      bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
-+                      PCIE_EXT_CFG_INDEX_REG);
-+}
-+
-+static struct clk *pcie_clk;
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+      u32 val;
-+
-+      /* enable clock */
-+      pcie_clk = clk_get(NULL, "pcie");
-+      if (IS_ERR_OR_NULL(pcie_clk))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(pcie_clk);
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
-+              bcm63xx_reset_pcie_gen1();
-+              bcm63xx_init_pcie_gen1();
-+      } else {
-+              bcm63xx_reset_pcie_gen2();
-+              bcm63xx_init_pcie_gen2();
-+      }
-+
-       /* setup class code as bridge */
-       val = bcm_pcie_readl(PCIE_IDVAL3_REG);
-       val &= ~IDVAL3_CLASS_CODE_MASK;
-@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
-       val &= ~CONFIG2_BAR1_SIZE_MASK;
-       bcm_pcie_writel(val, PCIE_CONFIG2_REG);
--      /* set bar0 to little endian */
--      val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
--      val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
--      val |= BASEMASK_REMAP_EN;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
--
--      val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
--      bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
--
-       register_pci_controller(&bcm63xx_pcie_controller);
-       return 0;
-@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
-       if (!bcm63xx_pci_enabled)
-               return -ENODEV;
--      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+      if (BCMCPU_IS_6318()) {
-+              bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
-+              bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
-+      } if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
-               bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
-       } else if (BCMCPU_IS_63268()) {
-@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
-       }
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM6318_CPU_ID:
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-       case BCM63268_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-4.1/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/brcm63xx/patches-4.1/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
deleted file mode 100644 (file)
index f5b0e77..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 12:26:57 +0100
-Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
- result
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
- arch/mips/bcm63xx/prom.c                               |  4 ++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 3 files changed, 13 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -22,6 +22,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+static int flash_type;
-+
- static struct mtd_partition mtd_partitions[] = {
-       {
-               .name           = "cfe",
-@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+void __init bcm63xx_flash_detect(void)
-+{
-+      flash_type = bcm63xx_detect_flash_type();
-+}
-+
- int __init bcm63xx_flash_register(void)
- {
--      int flash_type;
-       u32 val;
--      flash_type = bcm63xx_detect_flash_type();
--
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-               /* read base address of boot chip select (0) */
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -17,6 +17,7 @@
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_flash.h>
- void __init prom_init(void)
- {
-@@ -52,6 +53,9 @@ void __init prom_init(void)
-       reg &= ~mask;
-       bcm_perf_writel(reg, PERF_CKCTL_REG);
-+      /* detect and setup flash access */
-+      bcm63xx_flash_detect();
-+
-       /* do low level board init */
-       board_prom_init();
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -7,6 +7,8 @@ enum {
-       BCM63XX_FLASH_TYPE_NAND,
- };
-+void bcm63xx_flash_detect(void);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.1/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-4.1/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
deleted file mode 100644 (file)
index c8bef13..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 22 Dec 2013 13:25:25 +0100
-Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
-
-Some bootloaders leave the flash access in an invalid state with dual
-read enabled; fix it by disabling it and falling back to simple fast
-reads.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c | 51 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 51 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,6 +16,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/mtd/spi-nor.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-@@ -110,9 +111,59 @@ static int __init bcm63xx_detect_flash_t
-       }
- }
-+#define HSSPI_FLASH_CTRL_REG          0x14
-+#define FLASH_CTRL_READ_OPCODE_MASK   0xff
-+#define FLASH_CTRL_ADDR_BYTES_MASK    (0x3 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_2               (0 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_3               (1 << 8)
-+#define FLASH_CTRL_ADDR_BYTES_4               (2 << 8)
-+#define FLASH_CTRL_DUMMY_BYTES_SHIFT  10
-+#define FLASH_CTRL_DUMMY_BYTES_MASK   (0x3 << FLASH_CTRL_DUMMY_BYTES_SHIFT)
-+#define FLASH_CTRL_MB_EN              (1 << 23)
-+
- void __init bcm63xx_flash_detect(void)
- {
-       flash_type = bcm63xx_detect_flash_type();
-+
-+      /* ensure flash mapping has sane values */
-+      if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
-+          (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
-+           BCMCPU_IS_63268())) {
-+              u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
-+
-+              if (val & FLASH_CTRL_MB_EN) {
-+                      /* cfe might configure non working dual-io mode */
-+                      val &= ~FLASH_CTRL_MB_EN;
-+                      val &= ~FLASH_CTRL_READ_OPCODE_MASK;
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+
-+                      switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
-+                      case FLASH_CTRL_ADDR_BYTES_3:
-+                              val |= SPINOR_OP_READ_FAST;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_4:
-+                              val |= SPINOR_OP_READ4_FAST;
-+                              break;
-+                      case FLASH_CTRL_ADDR_BYTES_2:
-+                      default:
-+                              pr_warn("unsupported address byte mode (%x), not fixing up\n",
-+                                      val & FLASH_CTRL_ADDR_BYTES_MASK);
-+                              return;
-+                      }
-+              } else {
-+                      /* ensure dummy bytes is set to 1 for _FAST reads */
-+                      u8 cmd = val & FLASH_CTRL_READ_OPCODE_MASK;
-+
-+                      if (cmd != SPINOR_OP_READ_FAST && cmd != SPINOR_OP_READ4_FAST)
-+                              return;
-+
-+                      val &= ~FLASH_CTRL_DUMMY_BYTES_MASK;
-+                      val |= 1 << FLASH_CTRL_DUMMY_BYTES_SHIFT;
-+              }
-+
-+              bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
-+      }
- }
- int __init bcm63xx_flash_register(void)
diff --git a/target/linux/brcm63xx/patches-4.1/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-4.1/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
deleted file mode 100644 (file)
index 384702c..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -136,7 +136,11 @@ static struct clk clk_ephy = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
-+                              CKCTL_6318_ROBOSW025_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
-+      } else if (BCMCPU_IS_6328())
-               bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
-       else if (BCMCPU_IS_6362())
-               bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-@@ -183,18 +187,22 @@ static struct clk clk_pcm = {
-  */
- static void usbh_set(struct clk *clk, int enable)
- {
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6318()) {
-+              bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
-+              bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
-+      } else if (BCMCPU_IS_6328()) {
-               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
--      else if (BCMCPU_IS_6348())
-+      } else if (BCMCPU_IS_6348()) {
-               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
--      else if (BCMCPU_IS_6362())
-+      } else if (BCMCPU_IS_6362()) {
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
--      else if (BCMCPU_IS_6368())
-+      } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
--      else if (BCMCPU_IS_63268())
-+      } else if (BCMCPU_IS_63268()) {
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
--      else
-+      } else {
-               return;
-+      }
-       if (enable)
-               msleep(100);
-@@ -405,9 +413,9 @@ struct clk *clk_get(struct device *dev,
-               return &clk_enetsw;
-       if (!strcmp(id, "ephy"))
-               return &clk_ephy;
--      if (!strcmp(id, "usbh"))
-+      if (!strcmp(id, "usbh") || (BCMCPU_IS_6318() && !strcmp(id, "usbd")))
-               return &clk_usbh;
--      if (!strcmp(id, "usbd"))
-+      if (!strcmp(id, "usbd") && !BCMCPU_IS_6318())
-               return &clk_usbd;
-       if (!strcmp(id, "spi"))
-               return &clk_spi;
diff --git a/target/linux/brcm63xx/patches-4.1/347-MIPS-BCM6318-USB-support.patch b/target/linux/brcm63xx/patches-4.1/347-MIPS-BCM6318-USB-support.patch
deleted file mode 100644 (file)
index db489f8..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_6318()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
-+              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-+              reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
-       }
-       spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -681,6 +681,12 @@
- #define GPIO_MODE_6368_SPI_SSN4               (1 << 30)
- #define GPIO_MODE_6368_SPI_SSN5               (1 << 31)
-+#define GPIO_PINMUX_SEL0_6318         0x1c
-+#define GPIO_PINMUX_SEL0_GPIO13_SHIFT 26
-+#define GPIO_PINMUX_SEL0_GPIO13_MASK  (0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_PWRON (1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_LED   (2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
-+#define GPIO_PINMUX_SEL0_GPIO13_GPIO  (3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
- #define GPIO_PINMUX_OTHR_REG          0x24
- #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-@@ -999,6 +1005,7 @@
- #define USBH_PRIV_SWAP_6358_REG               0x0
- #define USBH_PRIV_SWAP_6368_REG               0x1c
-+#define USBH_PRIV_SWAP_6318_REG               0x0c
- #define USBH_PRIV_SWAP_USBD_SHIFT     6
- #define USBH_PRIV_SWAP_USBD_MASK      (1 << USBH_PRIV_SWAP_USBD_SHIFT)
-@@ -1024,6 +1031,13 @@
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
-+#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+#define USBH_PRIV_SIM_CTRL_6318_REG   0x20
-+#define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
-+
- /*************************************************************************
-  * _REG relative to RSET_USBD
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -126,6 +126,15 @@ void __init board_early_setup(const stru
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
-+
-+#if IS_ENABLED(CONFIG_USB)
-+      if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
-+              val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
-+              val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
-+              val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
-+              bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
-+      }
-+#endif
- }
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -22,6 +22,8 @@ config BCM63XX_CPU_6318
-       bool "support 6318 CPU"
-       select SYS_HAS_CPU_BMIPS32_3300
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
diff --git a/target/linux/brcm63xx/patches-4.1/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/brcm63xx/patches-4.1/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
deleted file mode 100644 (file)
index 10edbc4..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -586,6 +586,9 @@
- #define TIMER_CTL_MONOTONIC_MASK      (1 << 30)
- #define TIMER_CTL_ENABLE_MASK         (1 << 31)
-+/* Clock reset control (63268 only) */
-+#define TIMER_CLK_RST_CTL_REG         0x2c
-+#define CLK_RST_CTL_USB_REF_CLK_EN    (1 << 18)
- /*************************************************************************
-  * _REG relative to RSET_WDT
-@@ -1533,6 +1536,11 @@
- #define STRAPBUS_63268_FCVO_SHIFT     21
- #define STRAPBUS_63268_FCVO_MASK      (0xf << STRAPBUS_63268_FCVO_SHIFT)
-+#define MISC_IDDQ_CTRL_6328_REG               0x48
-+#define MISC_IDDQ_CTRL_63268_REG      0x4c
-+
-+#define IDDQ_CTRL_63268_USBH          (1 << 4)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -62,6 +62,26 @@ static void bcm_ub_hwclock_set(u32 mask,
-       bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
- }
-+static void bcm_misc_iddq_set(u32 mask, int enable)
-+{
-+      u32 offset;
-+      u32 reg;
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-+              offset = MISC_IDDQ_CTRL_6328_REG;
-+      else if (BCMCPU_IS_63268())
-+              offset = MISC_IDDQ_CTRL_63268_REG;
-+      else
-+              return;
-+
-+      reg = bcm_misc_readl(offset);
-+      if (enable)
-+              reg &= ~mask;
-+      else
-+              reg |= mask;
-+      bcm_misc_writel(reg, offset);
-+}
-+
- /*
-  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
-  */
-@@ -199,7 +219,17 @@ static void usbh_set(struct clk *clk, in
-       } else if (BCMCPU_IS_6368()) {
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-       } else if (BCMCPU_IS_63268()) {
-+              u32 reg;
-+
-               bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
-+              bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
-+              bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
-+              reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
-+              if (enable)
-+                      reg |= CLK_RST_CTL_USB_REF_CLK_EN;
-+              else
-+                      reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
-+              bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
-       } else {
-               return;
-       }
diff --git a/target/linux/brcm63xx/patches-4.1/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/brcm63xx/patches-4.1/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
deleted file mode 100644 (file)
index 0b70991..0000000
+++ /dev/null
@@ -1,117 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1033,11 +1033,18 @@
- #define USBH_PRIV_SETUP_6368_REG      0x28
- #define USBH_PRIV_SETUP_IOC_SHIFT     4
- #define USBH_PRIV_SETUP_IOC_MASK      (1 << USBH_PRIV_SETUP_IOC_SHIFT)
-+#define USBH_PRIV_SETUP_IPP_SHIFT     5
-+#define USBH_PRIV_SETUP_IPP_MASK      (1 << USBH_PRIV_SETUP_IPP_SHIFT)
- #define USBH_PRIV_SETUP_6318_REG      0x00
-+#define USBH_PRIV_PLL_CTRL1_6368_REG  0x18
- #define USBH_PRIV_PLL_CTRL1_6318_REG  0x04
--#define USBH_PRIV_PLL_CTRL1_SUSP_EN   (1 << 27)
--#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN        (1 << 31)
-+
-+#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN      (1 << 27)
-+#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN   (1 << 31)
-+#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN  (1 << 9)
-+#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY (1 << 10)
-+
- #define USBH_PRIV_SIM_CTRL_6318_REG   0x20
- #define USBH_PRIV_SIM_CTRL_LADDR_SEL  (1 << 5)
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -72,6 +72,8 @@ config BCM63XX_CPU_63268
-       bool "support 63268 CPU"
-       select SYS_HAS_CPU_BMIPS4350
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
- int __init bcm63xx_ehci_register(void)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--              !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
-@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-               reg |= USBH_PRIV_SETUP_IOC_MASK;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      } else if (BCMCPU_IS_63268()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              reg &= ~USBH_PRIV_SETUP_IPP_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
-+              reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
-+                       USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
-       } else if (BCMCPU_IS_6318()) {
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
-+              reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
-@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
--              reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
-+              reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
-               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
-               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/brcm63xx/patches-4.1/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-4.1/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
deleted file mode 100644 (file)
index 974c67f..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -41,6 +41,7 @@ struct board_info {
-       /* USB config */
-       struct bcm63xx_usbd_platform_data usbd;
-+      unsigned int num_usbh_ports:2;
-       /* DSP config */
-       struct bcm63xx_dsp_platform_data dsp;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_EHCI_H_
- #define BCM63XX_DEV_USB_EHCI_H_
--int bcm63xx_ehci_register(void);
-+int bcm63xx_ehci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_EHCI_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -1,6 +1,6 @@
- #ifndef BCM63XX_DEV_USB_OHCI_H_
- #define BCM63XX_DEV_USB_OHCI_H_
--int bcm63xx_ohci_register(void);
-+int bcm63xx_ohci_register(unsigned int num_ports);
- #endif /* BCM63XX_DEV_USB_OHCI_H_ */
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -166,6 +166,8 @@ static struct platform_device bcm63xx_gp
-  */
- int __init board_register_devices(void)
- {
-+      int usbh_ports = 0;
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -187,14 +189,21 @@ int __init board_register_devices(void)
-           !board_get_mac_address(board.enetsw.mac_addr))
-               bcm63xx_enetsw_register(&board.enetsw);
-+      if ((board.has_ohci0 || board.has_ehci0)) {
-+              usbh_ports = board.num_usbh_ports;
-+
-+              if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
-+                      usbh_ports = 1;
-+      }
-+
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-       if (board.has_ehci0)
--              bcm63xx_ehci_register();
-+              bcm63xx_ehci_register(usbh_ports);
-       if (board.has_ohci0)
--              bcm63xx_ohci_register();
-+              bcm63xx_ohci_register(usbh_ports);
-       if (board.has_dsp)
-               bcm63xx_dsp_register(&board.dsp);
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
-       },
- };
--int __init bcm63xx_ehci_register(void)
-+int __init bcm63xx_ehci_register(unsigned int num_ports)
- {
-       if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-               !BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
-               return 0;
-+      bcm63xx_ehci_pdata.num_ports = num_ports;       
-+
-       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-       ehci_resources[0].end = ehci_resources[0].start;
-       ehci_resources[0].end += RSET_EHCI_SIZE - 1;
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-       .no_big_frame_no        = 1,
--      .num_ports              = 1,
-       .power_on               = bcm63xx_ohci_power_on,
-       .power_off              = bcm63xx_ohci_power_off,
-       .power_suspend          = bcm63xx_ohci_power_off,
-@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
-       },
- };
--int __init bcm63xx_ohci_register(void)
-+int __init bcm63xx_ohci_register(unsigned int num_ports)
- {
-       if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-               return -ENODEV;
-+      bcm63xx_ohci_pdata.num_ports = num_ports;
-+
-       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-       ohci_resources[0].end = ohci_resources[0].start;
-       ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-4.1/351-set-board-usbh-ports.patch b/target/linux/brcm63xx/patches-4.1/351-set-board-usbh-ports.patch
deleted file mode 100644 (file)
index 51cb29d..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -591,6 +591,7 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_pccard = 1,
-       .has_ehci0 = 1,
-+      .num_usbh_ports                 = 2,
-       .leds = {
-               {
diff --git a/target/linux/brcm63xx/patches-4.1/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch b/target/linux/brcm63xx/patches-4.1/354-MIPS-BCM63XX-allow-building-support-for-more-than-on.patch
deleted file mode 100644 (file)
index 125ac83..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 0daf361ea799fba0af5a232036d0f06cea85ad24 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Jun 2014 12:47:49 +0200
-Subject: [PATCH 42/44] MIPS: BCM63XX: allow building support for more than one
- board type
-
-Use the arguments passed to the kernel to detect being booted with
-CFE as the indicator for bcm963xx board support, allowing the
-non presence of CFE_EPTSEAL to assume a different board type.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/Kconfig          |  7 +++----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  2 +-
- arch/mips/bcm63xx/boards/board_common.c   | 13 +++++++++++++
- arch/mips/bcm63xx/boards/board_common.h   |  6 ++++++
- 4 files changed, 23 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -1,11 +1,10 @@
--choice
--      prompt "Board support"
-+menu "Board support"
-       depends on BCM63XX
--      default BOARD_BCM963XX
- config BOARD_BCM963XX
-        bool "Generic Broadcom 963xx boards"
-       select SSB
-+      default y
-        help
--endchoice
-+endmenu
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -701,7 +701,7 @@ static const struct board_info __initcon
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
--void __init board_prom_init(void)
-+void __init board_bcm963xx_init(void)
- {
-       unsigned int i;
-       u8 *boot_addr, *cfe;
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -14,6 +14,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/spi/spi.h>
- #include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/fw/cfe/cfe_api.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_uart.h>
-@@ -31,6 +33,8 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include "board_common.h"
-+
- #define PFX   "board: "
- static struct board_info board;
-@@ -81,6 +85,15 @@ const char *board_get_name(void)
-       return board.name;
- }
-+void __init board_prom_init(void)
-+{
-+      /* detect bootloader */
-+      if (fw_arg3 == CFE_EPTSEAL)
-+              board_bcm963xx_init();
-+      else
-+              panic("unsupported bootloader detected");
-+}
-+
- static int (*board_get_mac_address)(u8 mac[ETH_ALEN]);
- /*
---- a/arch/mips/bcm63xx/boards/board_common.h
-+++ b/arch/mips/bcm63xx/boards/board_common.h
-@@ -6,4 +6,10 @@
- void board_early_setup(const struct board_info *board,
-                      int (*get_mac_address)(u8 mac[ETH_ALEN]));
-+#if defined(CONFIG_BOARD_BCM963XX)
-+void board_bcm963xx_init(void);
-+#else
-+static inline void board_bcm963xx_init(void) { }
-+#endif
-+
- #endif /* __BOARD_COMMON_H */
diff --git a/target/linux/brcm63xx/patches-4.1/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch b/target/linux/brcm63xx/patches-4.1/355-MIPS-BCM63XX-allow-board-implementations-to-force-fl.patch
deleted file mode 100644 (file)
index bdbba03..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From 8a30097a899b975709f728666d5ad20c8b832d21 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Mar 2014 04:28:14 +0100
-Subject: [PATCH 43/44] MIPS: BCM63XX: allow board implementations to force
- flash address
-
-Allow board implementations to force the physmap address.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                         | 19 ++++++++++++++-----
- .../mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
- 2 files changed, 16 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -58,6 +58,12 @@ static struct platform_device mtd_dev =
-       },
- };
-+void __init bcm63xx_flash_force_phys_base_address(u32 start, u32 end)
-+{
-+      mtd_resources[0].start = start;
-+      mtd_resources[0].end = end;
-+}
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -172,12 +178,15 @@ int __init bcm63xx_flash_register(void)
-       switch (flash_type) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
--              /* read base address of boot chip select (0) */
--              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
--              val &= MPI_CSBASE_BASE_MASK;
--              mtd_resources[0].start = val;
--              mtd_resources[0].end = 0x1FFFFFFF;
-+              if (!mtd_resources[0].start) {
-+                      /* read base address of boot chip select (0) */
-+                      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+                      val &= MPI_CSBASE_BASE_MASK;
-+
-+                      mtd_resources[0].start = val;
-+                      mtd_resources[0].end = 0x1FFFFFFF;
-+              }
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -9,6 +9,8 @@ enum {
- void bcm63xx_flash_detect(void);
-+void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-4.1/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch b/target/linux/brcm63xx/patches-4.1/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch
deleted file mode 100644 (file)
index cec6c7e..0000000
+++ /dev/null
@@ -1,188 +0,0 @@
-From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 29 Jul 2014 21:31:12 +0200
-Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
- unit
-
-In preparation for enhancing it, move it into its own file. Require a
-mac address to be passed as the argument to always "reserve" the mac
-regardless of the inclusion state of SSB.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |  2 +-
- arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
- arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
- 4 files changed, 83 insertions(+), 48 deletions(-)
- create mode 100644 arch/mips/bcm63xx/sprom.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
-                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--                 usb-common.o
-+                 usb-common.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -40,44 +40,6 @@
- static struct board_info board;
- /*
-- * Register a sane SPROMv2 to make the on-board
-- * bcm4318 WLAN work
-- */
--#ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
--      .revision               = 0x02,
--      .board_rev              = 0x17,
--      .country_code           = 0x0,
--      .ant_available_bg       = 0x3,
--      .pa0b0                  = 0x15ae,
--      .pa0b1                  = 0xfa85,
--      .pa0b2                  = 0xfe8d,
--      .pa1b0                  = 0xffff,
--      .pa1b1                  = 0xffff,
--      .pa1b2                  = 0xffff,
--      .gpio0                  = 0xff,
--      .gpio1                  = 0xff,
--      .gpio2                  = 0xff,
--      .gpio3                  = 0xff,
--      .maxpwr_bg              = 0x004c,
--      .itssi_bg               = 0x00,
--      .boardflags_lo          = 0x2848,
--      .boardflags_hi          = 0x0000,
--};
--
--int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
--{
--      if (bus->bustype == SSB_BUSTYPE_PCI) {
--              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
--              return 0;
--      } else {
--              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
--              return -EINVAL;
--      }
--}
--#endif
--
--/*
-  * return board name for /proc/cpuinfo
-  */
- const char *board_get_name(void)
-@@ -180,6 +142,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int usbh_ports = 0;
-+      u8 mac[ETH_ALEN];
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -224,15 +187,10 @@ int __init board_register_devices(void)
-       /* Generate MAC address for WLAN and register our SPROM,
-        * do this after registering enet devices
-        */
--#ifdef CONFIG_SSB_PCIHOST
--      if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
--              memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
--              if (ssb_arch_register_fallback_sprom(
--                              &bcm63xx_get_fallback_sprom) < 0)
--                      pr_err(PFX "failed to register fallback SPROM\n");
--      }
--#endif
-+
-+      if (board_get_mac_address(mac) ||
-+          bcm63xx_register_fallback_sprom(mac))
-+              pr_err(PFX "failed to register fallback SPROM\n");
-       bcm63xx_spi_register();
---- /dev/null
-+++ b/arch/mips/bcm63xx/sprom.c
-@@ -0,0 +1,70 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/ssb/ssb.h>
-+#include <bcm63xx_fallback_sprom.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "sprom: "
-+
-+/*
-+ * Register a sane SPROMv2 to make the on-board
-+ * bcm4318 WLAN work
-+ */
-+#ifdef CONFIG_SSB_PCIHOST
-+static struct ssb_sprom bcm63xx_sprom = {
-+      .revision               = 0x02,
-+      .board_rev              = 0x17,
-+      .country_code           = 0x0,
-+      .ant_available_bg       = 0x3,
-+      .pa0b0                  = 0x15ae,
-+      .pa0b1                  = 0xfa85,
-+      .pa0b2                  = 0xfe8d,
-+      .pa1b0                  = 0xffff,
-+      .pa1b1                  = 0xffff,
-+      .pa1b2                  = 0xffff,
-+      .gpio0                  = 0xff,
-+      .gpio1                  = 0xff,
-+      .gpio2                  = 0xff,
-+      .gpio3                  = 0xff,
-+      .maxpwr_bg              = 0x004c,
-+      .itssi_bg               = 0x00,
-+      .boardflags_lo          = 0x2848,
-+      .boardflags_hi          = 0x0000,
-+};
-+
-+int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
-+{
-+      if (bus->bustype == SSB_BUSTYPE_PCI) {
-+              memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
-+              return 0;
-+      } else {
-+              printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
-+              return -EINVAL;
-+      }