openwrt/staging/dedeckeh.git
2 years agox86: Set default baud rate on Geode images to 115200
David Woodhouse [Wed, 15 Feb 2017 17:27:45 +0000 (17:27 +0000)]
x86: Set default baud rate on Geode images to 115200

Prior to commit 1496b95a0 ("x86: clean up default grub baudrate
settings") we had three different baud rates for the Geode targets:
19200 for net5501, 38400 for alix2, and 115200 for Geos.

It doesn't seem that there's a very good reason for varying from our
default 115200 baud, so let's make the Geode target do that instead.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2 years agox86: Add Geos profile for Geode subtarget
David Woodhouse [Wed, 15 Feb 2017 16:11:12 +0000 (16:11 +0000)]
x86: Add Geos profile for Geode subtarget

This makes the Geode images actually useful again. The Geos profile
should include the relevant hardware for that board, and the Default
profile adds the via-rhine adapter which seems to have been present in
the net5501 and alix targets killed in commit 9e0759ea265 ("x86: merge
all geode based subtargets into one").

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2 years agox86: Add board configs for the PC Engines APU2
Chris Blake [Mon, 13 Feb 2017 08:01:14 +0000 (02:01 -0600)]
x86: Add board configs for the PC Engines APU2

This adds the default LED and network settings for the PC Engines APU2
when running under the x86 target.

[dwmw2: Change Ethernet port setup]
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2 years agox86: Enable DIAG LED on Geos
David Woodhouse [Mon, 13 Feb 2017 13:38:33 +0000 (13:38 +0000)]
x86: Enable DIAG LED on Geos

Based on a patch from Chris Blake <chrisrblake93@gmail.com>, except let's
do it by using the LED configuration instead of hard-coding it for each
board type. And try using /bin/board_detect to do the default behaviour,
on the first boot where the config hasn't yet been generated.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2 years agox86: Move Traverse Geos configs into x86 base-files
Chris Blake [Mon, 13 Feb 2017 08:01:13 +0000 (02:01 -0600)]
x86: Move Traverse Geos configs into x86 base-files

This change moves the files in 657418d to the root of the x86 target.
This is done in preperation for adding more devices under other
subtargets.

CC: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2 years agox86: Add configuration back for Traverse Geos
David Woodhouse [Fri, 10 Feb 2017 11:41:30 +0000 (11:41 +0000)]
x86: Add configuration back for Traverse Geos

When we merged all the Geode boards into one generic target, the default
network and LED configuration was lost. Put it back.

Fixes: 9e0759ea2653 ("x86: merge all geode based subtargets into one")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2 years agoMark targets using kernel 3.18 as source-only
Rafał Miłecki [Fri, 17 Feb 2017 05:57:33 +0000 (06:57 +0100)]
Mark targets using kernel 3.18 as source-only

We're past v17.01.0-rc2 phase and these few targets are stuck at 3.18
kernel. We obviously don't want to have targets like this built for the
release, especially with 3.18 being EOL.

It may be not too late for bringing these targets back for the next
minor release, so just mark them as source-only instead of dropping
completely.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agoramips: fix the number of uarts for MT7688
Furong Xu [Thu, 16 Feb 2017 03:10:28 +0000 (11:10 +0800)]
ramips: fix the number of uarts for MT7688

Same as MT7621 and MT7628, MT7688 allows up to 3 uarts

Signed-off-by: Furong Xu <xfr@outlook.com>
2 years agoramips: fix PWM pin mux conflict in dtsi
Furong Xu [Thu, 16 Feb 2017 02:00:48 +0000 (10:00 +0800)]
ramips: fix PWM pin mux conflict in dtsi

GPIO18 and GPIO19 on OMEGA2(+) should be GPIO mode, enable PWM lead to a conflict

[    0.290633] rt2880-pinmux pinctrl: pin io18 already requested by pinctrl; cannot claim for 10005000.pwm
[    0.299722] rt2880-pinmux pinctrl: pin-18 (10005000.pwm) status -22
[    0.305729] rt2880-pinmux pinctrl: could not request pin 18 (io18) from group pwm0  on device rt2880-pinmux
[    0.315131] mtk-pwm 10005000.pwm: Error applying setting, reverse things back

Keep PWM disabled.

Signed-off-by: Furong Xu <xfr@outlook.com>
2 years agougps: fix typo
Cezary Jackiewicz [Wed, 15 Feb 2017 18:06:04 +0000 (19:06 +0100)]
ugps: fix typo

Removing redundant spaces from the name of the option. Without fix:

root@LEDE:~# opkg install ugps
Installing ugps (2016-10-24-32a6b2b7-1) to root...
Downloading http://downloads.lede-project.org/releases/17.01-SNAPSHOT/packages/mips_24kc/base/ugps_2016-10-24-32a6b2b7-1_mips_24kc.ipk
Configuring ugps.
uci: Parse error (invalid character in name field) at line 3, byte 23
uci: Parse error (invalid character in name field) at line 3, byte 23
sh: out of range
root@LEDE:~# uci show gps
uci: Parse error (invalid character in name field) at line 3, byte 23

With this fix:

root@LEDE:~# uci show gps
gps.@gps[0]=gps
gps.@gps[0].tty='ttyACM0'
gps.@gps[0].adjust_time='1'

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2 years agobrcm47xx: fix button inversion for Asus WL-500W
Mirko Parthey [Tue, 14 Feb 2017 21:38:17 +0000 (22:38 +0100)]
brcm47xx: fix button inversion for Asus WL-500W

The Asus WL-500W buttons are active high,
but the software treats them as active low.
Fix the inverted logic.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agobrcm47xx: fix USB driver choice for Asus WL-500W
Mirko Parthey [Tue, 14 Feb 2017 14:05:09 +0000 (15:05 +0100)]
brcm47xx: fix USB driver choice for Asus WL-500W

BCM4704 SoC has only USB 1.1 core:
ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, vendor 0x4243)
but this device actually comes with two USB 2.0 ports.

It appears embedded controller isn't used but instead there are two PCI
attached controllers (next to the BCM4321 wireless card):
1106:3038 VT82xx/62xx UHCI USB 1.1 Controller
1106:3104 USB 2.0

Choose a set of USB drivers which actually support this hardware.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agoqos-scripts: fix module load commands (FS#438)
Felix Fietkau [Wed, 15 Feb 2017 13:00:24 +0000 (14:00 +0100)]
qos-scripts: fix module load commands (FS#438)

fq_codel is built-in, and xt_CONNMARK is provided by the xt_connmark
module

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agokernel: fix crashes on MIPS when loading kernel modules under memory pressure
Felix Fietkau [Wed, 15 Feb 2017 11:33:03 +0000 (12:33 +0100)]
kernel: fix crashes on MIPS when loading kernel modules under memory pressure

When memory is tight, modules may need to be loaded into vmalloc()
space. The code then has to generate jump trampolines which enable
relocations between vmalloc space and physical address space.

The code had a bug that was freeing these trampolines even when the
module was successfully loaded.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agomdns: update and rename package to the umdns
Rafał Miłecki [Wed, 15 Feb 2017 10:46:57 +0000 (11:46 +0100)]
mdns: update and rename package to the umdns

This update includes numerous small fixes for:
1) Interfaces setup
2) Packets parsing
3) Sending replies
Without this there were multiple problems with exchanging information
between (u)mdns and other implementations (including (u)mdns as well).

This also follows project rename to umdns which was required to avoid
confusion with Apple's mdnsd from mDNSResponder project.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agoar71xx: fix DEFAULT_PACKAGES for mikrotik devices
Felix Fietkau [Tue, 14 Feb 2017 12:14:38 +0000 (13:14 +0100)]
ar71xx: fix DEFAULT_PACKAGES for mikrotik devices

Include packages from the default profile for NAND devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agobuild: add buildbot specific config option for setting defaults
Felix Fietkau [Tue, 14 Feb 2017 11:24:07 +0000 (12:24 +0100)]
build: add buildbot specific config option for setting defaults

This can be used to tweak the buildbot behavior without having to change
buildbot's configuration.
It will also allow us to add more aggressive clean steps (e.g. on
toolchain changes), which would break developers' workflows if enable
by default.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agotools: patch-image: fix file descriptor leak.
Furong Xu [Tue, 14 Feb 2017 13:25:01 +0000 (21:25 +0800)]
tools: patch-image: fix file descriptor leak.

Maybe this is committed by mistake, fix it.

Signed-off-by: Furong Xu <xfr@outlook.com>
2 years agoocteon: only copy sysupgrade file if present
John Crispin [Wed, 15 Feb 2017 05:36:21 +0000 (06:36 +0100)]
octeon: only copy sysupgrade file if present

this caused

'mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory'

when running sysupgrade -n

Signed-off-by: John Crispin <john@phrozen.org>
2 years agoar71xx: Add missing device package om-watchdog for MR1750
Sven Eckelmann [Fri, 3 Feb 2017 08:14:57 +0000 (09:14 +0100)]
ar71xx: Add missing device package om-watchdog for MR1750

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: add OpenMesh A40 to OpenMesh A60 profile
Sven Eckelmann [Fri, 23 Sep 2016 07:39:06 +0000 (09:39 +0200)]
ar71xx: add OpenMesh A40 to OpenMesh A60 profile

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: extract ath10k wifi board.bin for the OpenMesh A40 board
Sven Eckelmann [Fri, 23 Sep 2016 07:40:10 +0000 (09:40 +0200)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh A40 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agopackage/uboot-envtools: add OpenMesh A40 support
Sven Eckelmann [Fri, 23 Sep 2016 07:38:34 +0000 (09:38 +0200)]
package/uboot-envtools: add OpenMesh A40 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agopackage/om-watchdog: add OpenMesh A40 support
Sven Eckelmann [Fri, 23 Sep 2016 07:38:10 +0000 (09:38 +0200)]
package/om-watchdog: add OpenMesh A40 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: enable sysupgrade for the OpenMesh A40
Sven Eckelmann [Fri, 23 Sep 2016 07:37:44 +0000 (09:37 +0200)]
ar71xx: enable sysupgrade for the OpenMesh A40

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: add user-space support for the OpenMesh A40
Sven Eckelmann [Fri, 23 Sep 2016 07:36:43 +0000 (09:36 +0200)]
ar71xx: add user-space support for the OpenMesh A40

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: add kernel support for the OpenMesh A40 board
Sven Eckelmann [Fri, 23 Sep 2016 07:36:10 +0000 (09:36 +0200)]
ar71xx: add kernel support for the OpenMesh A40 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: create profile and build image for the OpenMesh A60 board
Sven Eckelmann [Tue, 9 Aug 2016 14:10:16 +0000 (16:10 +0200)]
ar71xx: create profile and build image for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: extract ath10k wifi board.bin for the OpenMesh A60 board
Sven Eckelmann [Tue, 9 Aug 2016 14:12:06 +0000 (16:12 +0200)]
ar71xx: extract ath10k wifi board.bin for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agopackage/uboot-envtools: add OpenMesh a60 support
Sven Eckelmann [Tue, 9 Aug 2016 14:02:39 +0000 (16:02 +0200)]
package/uboot-envtools: add OpenMesh a60 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agopackage/om-watchdog: add OpenMesh A60 support
Sven Eckelmann [Tue, 9 Aug 2016 14:01:50 +0000 (16:01 +0200)]
package/om-watchdog: add OpenMesh A60 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: enable sysupgrade for the OpenMesh A60
Sven Eckelmann [Tue, 9 Aug 2016 14:00:55 +0000 (16:00 +0200)]
ar71xx: enable sysupgrade for the OpenMesh A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoscripts/om-fwupgradecfg-gen.sh: add support for the A60
Sven Eckelmann [Tue, 9 Aug 2016 14:08:01 +0000 (16:08 +0200)]
scripts/om-fwupgradecfg-gen.sh: add support for the A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: add user-space support for the OpenMesh A60
Sven Eckelmann [Tue, 9 Aug 2016 14:06:45 +0000 (16:06 +0200)]
ar71xx: add user-space support for the OpenMesh A60

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: add kernel support for the OpenMesh A60 board
Sven Eckelmann [Tue, 9 Aug 2016 13:58:08 +0000 (15:58 +0200)]
ar71xx: add kernel support for the OpenMesh A60 board

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agopackage/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support
Sven Eckelmann [Thu, 2 Jun 2016 09:33:13 +0000 (11:33 +0200)]
package/uboot-envtools: add OpenMesh OM2Pv4/-HSv4 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agopackage/om-watchdog: add OpenMesh OM2Pv4/-HSv4 support
Sven Eckelmann [Thu, 2 Jun 2016 09:31:47 +0000 (11:31 +0200)]
package/om-watchdog: add OpenMesh OM2Pv4/-HSv4 support

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: enable sysupgrade for the OpenMesh OM2Pv4/-HSv4
Sven Eckelmann [Thu, 2 Jun 2016 09:29:23 +0000 (11:29 +0200)]
ar71xx: enable sysupgrade for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4
Sven Eckelmann [Thu, 2 Jun 2016 09:25:00 +0000 (11:25 +0200)]
ar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4
Sven Eckelmann [Thu, 2 Jun 2016 09:23:21 +0000 (11:23 +0200)]
ar71xx: add kernel support for the OpenMesh OM2Pv4/-HSv4

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoar71xx: Remove the v2/v3 from the OpenMesh profile names
Sven Eckelmann [Thu, 2 Jun 2016 09:06:39 +0000 (11:06 +0200)]
ar71xx: Remove the v2/v3 from the OpenMesh profile names

The list of v2/v3 devices is getting longer and makes reading the names of
the profiles unnecessary hard.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2 years agoprocd: fix default timeout for reload trigger actions
Denis Osvald [Tue, 14 Feb 2017 16:08:49 +0000 (17:08 +0100)]
procd: fix default timeout for reload trigger actions

Default trigger action timeout was added to procd.sh in commit f88e3a4c0
(procd: add default timeout for reload trigger actions)
However, the timeout value was not placed under the correct JSON-script
array nesting level and thus did not apply.

To fix this and make the timeout actually apply to the reload triggers,
we place it in the correct scope, that is the per-trigger array.

Fixes: f88e3a4c0abb60bb76a7678dd30dfdc8a808a2f1
Signed-off-by: Denis Osvald <denis.osvald@sartura.hr>
2 years agomvebu: append metadata to clearfog sd card images
Jonas Gorski [Mon, 13 Feb 2017 16:40:29 +0000 (17:40 +0100)]
mvebu: append metadata to clearfog sd card images

Fixes the following issue:

root@LEDE:/# sysupgrade /tmp/lede-mvebu-armada-388-clearfog-sdcard.img.gz
Saving metaconfig...
Image metadata not found
Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check 'fwtool_check_image' failed.
root@LEDE:/#

Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2 years agobrcm63xx: Neufbox 6: fix switch by probing through DT
Jonas Gorski [Tue, 7 Feb 2017 16:15:36 +0000 (17:15 +0100)]
brcm63xx: Neufbox 6: fix switch by probing through DT

Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2 years agosdk: clean scripts/config before packing tarball (FS#504)
Felix Fietkau [Mon, 13 Feb 2017 10:45:43 +0000 (11:45 +0100)]
sdk: clean scripts/config before packing tarball (FS#504)

Avoids shipping potentially incompatible object files and also reduces
the tarball size

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agoramips: added image size into dwr-512 DT
Giuseppe Lippolis [Sat, 11 Feb 2017 17:53:33 +0000 (18:53 +0100)]
ramips: added image size into dwr-512 DT

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2 years agolayerscape: fix adjust_link for 10G & 2.5G
Yangbo Lu [Fri, 10 Feb 2017 18:03:35 +0000 (02:03 +0800)]
layerscape: fix adjust_link for 10G & 2.5G

Added a linux-4.4 patch to fix adjust_link for 10G & 2.5G.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2 years agoramips: Correct switch configuration for Newifi D1
Chuanhong Guo [Sat, 11 Feb 2017 13:32:07 +0000 (21:32 +0800)]
ramips: Correct switch configuration for Newifi D1

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2 years agolantiq: fix patching the wifi mac address on BTHOMEHUBV3A
Martin Blumenstingl [Sun, 12 Feb 2017 22:29:16 +0000 (22:29 +0000)]
lantiq: fix patching the wifi mac address on BTHOMEHUBV3A

The firmware hotplug script tries to read the mac address from a
partition with the name "uboot-env" which does not exist (instead it's
name is uboot_env). This broke calculation of the new checksum (after
patching the mac address) which resulted in ath9k refusing to use the
EEPROM data.

The original error reported by ath9k was:
PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
ath: phy0: Bad EEPROM checksum 0x2523
ath: phy0: Unable to initialize hardware; initialization status: -22
ath9k 0000:00:0e.0: Failed to initialize device

Fixes: a20616863d32d9 ("lantiq: use ath9k device tree bindings
binding/owl-loader")

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2 years agoath9k: fix various issues in the airtime-fairness implementation
Felix Fietkau [Sun, 12 Feb 2017 12:25:08 +0000 (13:25 +0100)]
ath9k: fix various issues in the airtime-fairness implementation

Effects of the bugs could include memory corruption, tx hangs, kernel
crahes, possibly other things as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agokernel: MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch
Hauke Mehrtens [Sun, 12 Feb 2017 00:40:16 +0000 (01:40 +0100)]
kernel: MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch

This backports the following fix to our mips IRQ stack patches:
https://patchwork.linux-mips.org/patch/15110/

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2 years agobrcm63xx: fix lzma loader for BCM6362
Jonas Gorski [Tue, 7 Feb 2017 18:08:04 +0000 (19:08 +0100)]
brcm63xx: fix lzma loader for BCM6362

BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2 years agobrcm63xx: do a full reset phy cycle
Jonas Gorski [Wed, 1 Feb 2017 11:11:07 +0000 (12:11 +0100)]
brcm63xx: do a full reset phy cycle

Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2 years agobrcm63xx: fix external interrupts on BCM6318
Jonas Gorski [Mon, 19 Dec 2016 12:02:21 +0000 (13:02 +0100)]
brcm63xx: fix external interrupts on BCM6318

Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2 years agoodhcpd: update to git HEAD version (FS#396)
Hans Dedecker [Thu, 9 Feb 2017 17:20:13 +0000 (18:20 +0100)]
odhcpd: update to git HEAD version (FS#396)

8df4253 ndp: harden netlink event socket error handling
b02f3e6 ndp: close proc file descriptor also during error handling
8a615ad npd: rework IPv6 relay logic (FS#396)
0129f79 config: restore interface defaults when cleaning interface

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2 years agoodhcpd: update to git HEAD version (FS#388)
Hans Dedecker [Wed, 1 Feb 2017 19:59:49 +0000 (20:59 +0100)]
odhcpd: update to git HEAD version (FS#388)

3317c86 dhcpv6-ia: apply lease delete based on assignment bound state
df50429 odhcpd: properly handle netlink messages (FS#388)
83d72cf odhcpd: fix coding style

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2 years agoarc770: backport upstream fix for unaligned access
Alexey Brodkin [Wed, 8 Feb 2017 14:01:00 +0000 (17:01 +0300)]
arc770: backport upstream fix for unaligned access

This commit reverts 42f3c1f ("arc770: fix broken upstream change")
and simultaneously adds back-ported fix from Linus' tree:
a524c218bc94 ("ARC: [arcompact] brown paper bag bug in unaligned
access delay slot fixup").

Note mentioned patch will appear in stable trees soon as well so
IMHO there's not much sense in adding this separate patch in lede/master branch.
As well as we will get rid of it here in 17.01 once we bump 4.4 kernel here
later down the line.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Jo-Philipp Wich <jo@mein.io>
2 years agoprocd: update to latest git HEAD
John Crispin [Wed, 8 Feb 2017 11:39:10 +0000 (12:39 +0100)]
procd: update to latest git HEAD

cdc3dab ujail: fix signal forwarding

Signed-off-by: John Crispin <john@phrozen.org>
2 years agoramips: fix AR670W partition alignment
Claudio Leite [Sun, 5 Feb 2017 08:59:45 +0000 (03:59 -0500)]
ramips: fix AR670W partition alignment

mtdsplit_lzma requires that the rootfs be aligned to a block boundary.
Pad the kernel partition to make this so.

Signed-off-by: Claudio Leite <leitec@gmail.com>
2 years agobrcmfmac: improve Raspberry Pi 3 stability
Álvaro Fernández Rojas [Tue, 7 Feb 2017 13:45:19 +0000 (14:45 +0100)]
brcmfmac: improve Raspberry Pi 3 stability

- Really disable power management (wrong config flags).
- Disable internal roaming engine.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2 years agobcm53xx: add missing system.sh include
Rafał Miłecki [Tue, 7 Feb 2017 10:43:49 +0000 (11:43 +0100)]
bcm53xx: add missing system.sh include

It's needed for macaddr_add.

Fixes: 5ed23223fd1f ("bcm53xx: set WAN MAC address to don't share one with LAN interface")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agoarc770: fix broken upstream change
Jo-Philipp Wich [Tue, 7 Feb 2017 08:30:41 +0000 (09:30 +0100)]
arc770: fix broken upstream change

Add a patch to revert upstream commit 9aed02feae57bf7a40cb04ea0e3017cb7a998db4
which introduces syntax errors.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agotcpdump: update to version 4.9.0
Hauke Mehrtens [Sun, 5 Feb 2017 12:00:38 +0000 (13:00 +0100)]
tcpdump: update to version 4.9.0

This fixes the following 41 security problems:
 + CVE-2016-7922: buffer overflow in print-ah.c:ah_print().
 + CVE-2016-7923: buffer overflow in print-arp.c:arp_print().
 + CVE-2016-7924: buffer overflow in print-atm.c:oam_print().
 + CVE-2016-7925: buffer overflow in print-sl.c:sl_if_print().
 + CVE-2016-7926: buffer overflow in print-ether.c:ethertype_print().
 + CVE-2016-7927: buffer overflow in print-802_11.c:ieee802_11_radio_print().
 + CVE-2016-7928: buffer overflow in print-ipcomp.c:ipcomp_print().
 + CVE-2016-7929: buffer overflow in print-juniper.c:juniper_parse_header().
 + CVE-2016-7930: buffer overflow in print-llc.c:llc_print().
 + CVE-2016-7931: buffer overflow in print-mpls.c:mpls_print().
 + CVE-2016-7932: buffer overflow in print-pim.c:pimv2_check_checksum().
 + CVE-2016-7933: buffer overflow in print-ppp.c:ppp_hdlc_if_print().
 + CVE-2016-7934: buffer overflow in print-udp.c:rtcp_print().
 + CVE-2016-7935: buffer overflow in print-udp.c:rtp_print().
 + CVE-2016-7936: buffer overflow in print-udp.c:udp_print().
 + CVE-2016-7937: buffer overflow in print-udp.c:vat_print().
 + CVE-2016-7938: integer overflow in print-zeromq.c:zmtp1_print_frame().
 + CVE-2016-7939: buffer overflow in print-gre.c, multiple functions.
 + CVE-2016-7940: buffer overflow in print-stp.c, multiple functions.
 + CVE-2016-7973: buffer overflow in print-atalk.c, multiple functions.
 + CVE-2016-7974: buffer overflow in print-ip.c, multiple functions.
 + CVE-2016-7975: buffer overflow in print-tcp.c:tcp_print().
 + CVE-2016-7983: buffer overflow in print-bootp.c:bootp_print().
 + CVE-2016-7984: buffer overflow in print-tftp.c:tftp_print().
 + CVE-2016-7985: buffer overflow in print-calm-fast.c:calm_fast_print().
 + CVE-2016-7986: buffer overflow in print-geonet.c, multiple functions.
 + CVE-2016-7992: buffer overflow in print-cip.c:cip_if_print().
 + CVE-2016-7993: a bug in util-print.c:relts_print() could cause a
      buffer overflow in multiple protocol parsers (DNS, DVMRP, HSRP, IGMP,
      lightweight resolver protocol, PIM).
 + CVE-2016-8574: buffer overflow in print-fr.c:frf15_print().
 + CVE-2016-8575: buffer overflow in print-fr.c:q933_print().
 + CVE-2017-5202: buffer overflow in print-isoclns.c:clnp_print().
 + CVE-2017-5203: buffer overflow in print-bootp.c:bootp_print().
 + CVE-2017-5204: buffer overflow in print-ip6.c:ip6_print().
 + CVE-2017-5205: buffer overflow in print-isakmp.c:ikev2_e_print().
 + CVE-2017-5341: buffer overflow in print-otv.c:otv_print().
 + CVE-2017-5342: a bug in multiple protocol parsers (Geneve, GRE, NSH,
      OTV, VXLAN and VXLAN GPE) could cause a buffer overflow in
      print-ether.c:ether_print().
 + CVE-2017-5482: buffer overflow in print-fr.c:q933_print().
 + CVE-2017-5483: buffer overflow in print-snmp.c:asn1_parse().
 + CVE-2017-5484: buffer overflow in print-atm.c:sig_print().
 + CVE-2017-5485: buffer overflow in addrtoname.c:lookup_nsap().
 + CVE-2017-5486: buffer overflow in print-isoclns.c:clnp_print().

The size of the package is only incread very little:
new size:
306430 tcpdump_4.9.0-1_mips_24kc.ipk
130324 tcpdump-mini_4.9.0-1_mips_24kc.ipk

old size:
302782 tcpdump_4.8.1-1_mips_24kc.ipk
129033 tcpdump-mini_4.8.1-1_mips_24kc.ipk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2 years agobcm53xx: set Netgear R8000 USB LEDs
Rafał Miłecki [Mon, 6 Feb 2017 19:23:48 +0000 (20:23 +0100)]
bcm53xx: set Netgear R8000 USB LEDs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agokernel: update kernel 4.4 to version 4.4.47
Stijn Tintel [Mon, 6 Feb 2017 01:47:54 +0000 (02:47 +0100)]
kernel: update kernel 4.4 to version 4.4.47

Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked
broken, except arc770 and arch38 due to broken toolchain.

Runtime-tested on ar71xx, octeon, ramips and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit d2c4041f0266cc93447998ddd67c7d6b6a4c2ee3)

Conflicts:
include/kernel-version.mk
target/linux/ramips/patches-4.4/997-ralink-Introduce-fw_passed_dtb-to-arch-mips-ralink.patch

2 years agokernel: bump to 4.4.46
Koen Vandeputte [Wed, 1 Feb 2017 16:02:21 +0000 (17:02 +0100)]
kernel: bump to 4.4.46

Refreshed patches for all supported targets.

Compile-tested on ar71xx, cns3xxx, imx6, mt7621, oxnas and x86/64.
Run-tested on ar71xx, cns3xxx, imx6 and mt7621.

Tested-by: Stijn Segers <francesco.borromini@inventati.org>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 3becadd56cddfb8abff50cdb0ef1cb3f90b0809a)
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2 years agokernel: bump to 4.4.45
Koen Vandeputte [Fri, 27 Jan 2017 14:18:00 +0000 (15:18 +0100)]
kernel: bump to 4.4.45

Refreshed patches for all supported targets.

Compiled & tested on cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 4d1515070baeca64fedaca957b6b4156976f3b3a)
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Conflicts:
target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch

2 years agoKernel: bump to 4.4.44
Stijn Segers [Sat, 21 Jan 2017 17:30:10 +0000 (18:30 +0100)]
Kernel: bump to 4.4.44

Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
(cherry picked from commit 20996edd68b8a0b139bdb36b3aafa29c037d4bda)
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Conflicts:
target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch

2 years agobcm53xx: refresh Linux 4.4 config
Rafał Miłecki [Mon, 6 Feb 2017 16:20:59 +0000 (17:20 +0100)]
bcm53xx: refresh Linux 4.4 config

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agobcm53xx: image: use one style of adding TARGET_DEVICES entries
Rafał Miłecki [Mon, 6 Feb 2017 12:58:47 +0000 (13:58 +0100)]
bcm53xx: image: use one style of adding TARGET_DEVICES entries

It just makes code consistent. This trivial change may be a 17.01
candidate to provide simpler backporting experience.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agobcm53xx: backport upstream DTS files for Linksys devices
Rafał Miłecki [Mon, 6 Feb 2017 07:43:01 +0000 (08:43 +0100)]
bcm53xx: backport upstream DTS files for Linksys devices

We dont't build officialy images for them yet due to partitioning
issues.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agobcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices
Rafał Miłecki [Wed, 18 Jan 2017 06:16:37 +0000 (07:16 +0100)]
bcm53xx: use accepted BCM5301X patches for R8000 and Luxul devices

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: brcmfmac: backport wowlan netdetect fixes
Rafał Miłecki [Thu, 2 Feb 2017 10:23:17 +0000 (11:23 +0100)]
mac80211: brcmfmac: backport wowlan netdetect fixes

I needed a moment to figure out relation between this patchset and the
nl80211: fix validation of scheduled scan info for wowlan netdetect

It appears nl80211 commit will go on top of brcmfmac changes so it's
safe to backport these patches.

One patch that was excluded is commit 2a2a5d1835b6 ("brcmfmac: add
.update_connect_params() callback") as it depends on missing commit
088e8df82f91 ("cfg80211: Add support to update connection parameters").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: brcmfmac: backport PSM watchdog improvements
Rafał Miłecki [Thu, 2 Feb 2017 09:04:57 +0000 (10:04 +0100)]
mac80211: brcmfmac: backport PSM watchdog improvements

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: brcmfmac: backport minor code cleanups
Rafał Miłecki [Thu, 2 Feb 2017 08:59:05 +0000 (09:59 +0100)]
mac80211: brcmfmac: backport minor code cleanups

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: brcmfmac: backport 4.10 fixes & typo fix
Rafał Miłecki [Thu, 2 Feb 2017 08:29:21 +0000 (09:29 +0100)]
mac80211: brcmfmac: backport 4.10 fixes & typo fix

This includes memory leak fix in initialization path.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: brcmfmac: backport scheduled scan cleanup and chip support
Rafał Miłecki [Thu, 2 Feb 2017 08:27:20 +0000 (09:27 +0100)]
mac80211: brcmfmac: backport scheduled scan cleanup and chip support

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: brcmfmac: backport some old patches from 2016
Rafał Miłecki [Thu, 2 Feb 2017 08:21:13 +0000 (09:21 +0100)]
mac80211: brcmfmac: backport some old patches from 2016

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: rename brcmfmac patches to use higher prefix
Rafał Miłecki [Thu, 2 Feb 2017 08:39:31 +0000 (09:39 +0100)]
mac80211: rename brcmfmac patches to use higher prefix

There are more patches to backport that should go before these.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agokernel: backport bgmac support for external PHYs
Rafał Miłecki [Tue, 31 Jan 2017 21:01:05 +0000 (22:01 +0100)]
kernel: backport bgmac support for external PHYs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agokernel: use upstream accepted bgmac fix for BCM47186B0
Rafał Miłecki [Tue, 31 Jan 2017 20:08:18 +0000 (21:08 +0100)]
kernel: use upstream accepted bgmac fix for BCM47186B0

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agokernel: rename bgmac patches to squeeze them
Rafał Miłecki [Tue, 31 Jan 2017 20:00:51 +0000 (21:00 +0100)]
kernel: rename bgmac patches to squeeze them

This is a pure rename without any changes. It makes maintaining bgmac
simpler and will hopefully make adding new kernel a bit easier.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomac80211: start hostapd with logging wpa_printf messages to syslog
Rafał Miłecki [Mon, 30 Jan 2017 06:32:00 +0000 (07:32 +0100)]
mac80211: start hostapd with logging wpa_printf messages to syslog

Some debugging/error messages are printed using wpa_printf and this
change allows finally reading them out of the syslog.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agohostapd: enable support for logging wpa_printf messages to syslog
Rafał Miłecki [Mon, 30 Jan 2017 06:31:59 +0000 (07:31 +0100)]
hostapd: enable support for logging wpa_printf messages to syslog

This will allow starting hostapd with the new -s parameter and finally
read all (error) messages from the syslog.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agohostapd: backport support for sending debug messages to the syslog
Rafał Miłecki [Wed, 25 Jan 2017 07:32:00 +0000 (08:32 +0100)]
hostapd: backport support for sending debug messages to the syslog

It wasn't possible to read hostapd wpa_printf messages unless running
hostapd manually. It was because hostapd was printing them using vprintf
and not directly to the syslog.

We were trying to workaround this problem by redirecting STDIN_FILENO
and STDOUT_FILENO but it was working only for the initialization phase.
As soon as hostapd did os_daemonize our solution stopped working.

Please note despite the subject this change doesn't affect debug level
messages only but just everything printed by hostapd with wpa_printf
including MSG_ERROR-s. This makes it even more important as reading
error messages can be quite useful for debugging.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agoramips: fix Airlink AR725W factory image build
Mathias Kresin [Sat, 4 Feb 2017 10:02:36 +0000 (11:02 +0100)]
ramips: fix Airlink AR725W factory image build

The factory image can't be bigger than 3328 KByte. If the image is
bigger than that, the gemtek-header tool throws an error and breaks
the build.

Make sure the output file to which the gemtek header should be added
exists and wasn't removed during the check-size step because of it
size. This will prevent hard errors in case the factory image is to big
similar to what is done for sysupgrade images.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agoipq806x: fix wireless macs
Hannu Nyman [Fri, 3 Feb 2017 13:10:57 +0000 (15:10 +0200)]
ipq806x: fix wireless macs

Commit 71a39b8 ("ipq806x: Fix wireless support for Netgear Nighthawk X4S
D7800") added a trailing TAB char after the backslash which prevents
the assignment of the correct MACs for wifi devices.

Fixes: FS#451

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
[reworded commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agobcm53xx: set WAN MAC address to don't share one with LAN interface
Rafał Miłecki [Wed, 1 Feb 2017 15:45:19 +0000 (16:45 +0100)]
bcm53xx: set WAN MAC address to don't share one with LAN interface

After analyzing numerous NVRAMs and vendor firmwares it seems the base
MAC address is used for LAN interface. WAN interface has different one
which sometimes is set directly in NVRAM and sometines needs to be
calculated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agoipq806x: fixup nbg6817 internal mmc and switch configuration in DTS
André Valentin [Thu, 2 Feb 2017 11:05:32 +0000 (12:05 +0100)]
ipq806x: fixup nbg6817 internal mmc and switch configuration in DTS

The setting mmc-ddr-1_8v in the platform dts leads to read errors. The
device is unusable and system reboots in a loop. Because NBG6817 is the
only mmc device, I removed it in base dts.

The second change removes settings now present in base dts.

The third change references was a wrong conversion of constants in the switch settings.
Switch now initializes again.

Signed-off-by: André Valentin <avalentin@marcant.net>
2 years agoccache, samba36: fix samba.org addresses to use https
Hannu Nyman [Wed, 1 Feb 2017 21:17:37 +0000 (23:17 +0200)]
ccache, samba36: fix samba.org addresses to use https

samba.org has started to enforce https and
currently plain http downloads with curl/wget fail,
so convert samba.org download links to use https.

Modernise links at the same time.

Also convert samba.org URL fields to have https.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2 years agokernel: fix BCM54612E PHY support
Rafał Miłecki [Wed, 1 Feb 2017 19:53:15 +0000 (20:53 +0100)]
kernel: fix BCM54612E PHY support

This backports upstream commit 62e13097c46c ("net: phy: broadcom: rehook
BCM54612E specific init")

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomusl: update musl to 1.1.16+ and switch to download from git
Christian Lamparter [Tue, 3 Jan 2017 16:51:04 +0000 (17:51 +0100)]
musl: update musl to 1.1.16+ and switch to download from git

This patch updates musl to 1.1.16+ [0] and removes all the
backported patches. This is a major release and tagged as such.
For more information visit musl-libc.org or read the WHATSNEW.

Furthermore, this patch also changes musl to download directly
from git. This makes it easier to update musl in the future.

The patch custom Add-format-attribute-to-some-function-declarations.patch
was assigned a new 400- number. This should avoid confusion
since 0xx numbers are usually assigned to backports.

[0] <http://git.musl-libc.org/cgit/musl/commit/?id=769f53598e781ffc89191520f3f8a93cb58db91f>

Cc: Hannu Nyman <hannu.nyman@iki.fi>
Cc: Koen Vandeputte <koen.vandeputte@ncentric.com>
Cc: Jo-Philipp Wich <jo@mein.io>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
2 years agoar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mapping
Qian Zheng [Thu, 12 Jan 2017 01:39:55 +0000 (09:39 +0800)]
ar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mapping

Signed-off-by: Qian Zheng <sotux82@gmail.com>
2 years agoar71xx: fix netgear wnr2000 v3 switch port mapping
Qian Zheng [Thu, 12 Jan 2017 01:34:53 +0000 (09:34 +0800)]
ar71xx: fix netgear wnr2000 v3 switch port mapping

Signed-off-by: Qian Zheng <sotux82@gmail.com>
[Jo-Philipp Wich: fix alphabetical order after merging with gl-ar300 case]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agoar71xx: fix tl-wr841n-v7 switch port mapping
Qian Zheng [Thu, 12 Jan 2017 01:26:20 +0000 (09:26 +0800)]
ar71xx: fix tl-wr841n-v7 switch port mapping

Signed-off-by: Qian Zheng <sotux82@gmail.com>
[Jo-Philipp Wich: fix alphabetical order]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agomvebu: fix usb port leds
Mathias Kresin [Tue, 24 Jan 2017 22:04:10 +0000 (23:04 +0100)]
mvebu: fix usb port leds

All mvebu boards have three USB LEDs. The first one is used for the
USB1 port.

There are two LEDs related to the second USB port. The top (bar) LED
gets bright in case any USB device is connected to the second USB port.

If the connected device is an USB 3 (SuperSpeed) device, the small dot
LED bellow the "bar" LED gets also bright.

While at it, use a name for the USB LEDs that matches the names printed
on the case.

Fixes: FS#423, FS#425

Signed-off-by: Kabuli Chana <newtownbuild@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agomvebu: set fan_ctrl.sh only on mamba
Hans Geiblinger [Fri, 13 Jan 2017 14:13:55 +0000 (09:13 -0500)]
mvebu: set fan_ctrl.sh only on mamba

Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
2 years agox86: add kernel module for sp5100_tco watchdog
Chris Blake [Sat, 14 Jan 2017 16:20:25 +0000 (10:20 -0600)]
x86: add kernel module for sp5100_tco watchdog

This change adds the sp5100_tco driver as a kernel module for the x86
target. Specifically, this can be used by the PCEngines APU2/APU3. The
reason for having this as a kernel module is to allow users to
load/unload it on demand, as the I2C interface on the APU2/APU3 will not
work while this module is loaded. More info can be found on GitHub at
https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2 years agox86: Add sp5100_tco AMD patches
Chris Blake [Sat, 14 Jan 2017 16:20:24 +0000 (10:20 -0600)]
x86: Add sp5100_tco AMD patches

This adds the following patches to the x86 target:

sp5100_tco: Add AMD Mullins platform support
sp5100_tco: Add AMD Carrizo platform support
sp5100_tco: fix the device check for SB800 and later chipsets
watchdog: sp5100_tco: properly check for new register layouts

With these added, the sp5100_tco driver can then be used on newer AMD
platforms, such as the PCEngines APU2/APU3 boards.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2 years agoocteon: fix mtd partitions for erlite on cmdline
Jiri Kastner [Wed, 18 Jan 2017 09:45:23 +0000 (10:45 +0100)]
octeon: fix mtd partitions for erlite on cmdline

erlite mtdparts exposes boot0, boot1 and eeprom regions
as read/write.
this patch adds readonly flags, so these regions can't be
modified. same as it is already for ER profile.

Signed-off-by: Jiri Kastner <cz172638@gmail.com>