From b5893d19fc774939920f8566d8770a00e008f972 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 5 Apr 2005 18:21:58 +0000 Subject: [PATCH] hide experimental/developer options from the user. can be reenabled by using make menuconfig DEVELOPER=1 SVN-Revision: 567 --- openwrt/Config.in | 26 ++---- openwrt/Config.in.devel | 114 +++++++++++++++++++++++++++ openwrt/Makefile | 4 + openwrt/package/busybox/Config.in | 1 + openwrt/toolchain/Config.in | 41 ++-------- openwrt/toolchain/Config.in.devel | 55 +++++++++++++ openwrt/toolchain/binutils/Config.in | 8 +- openwrt/toolchain/ccache/Config.in | 7 +- openwrt/toolchain/gcc/Config.in | 15 ++-- openwrt/toolchain/uClibc/Config.in | 11 ++- 10 files changed, 211 insertions(+), 71 deletions(-) create mode 100644 openwrt/Config.in.devel create mode 100644 openwrt/toolchain/Config.in.devel diff --git a/openwrt/Config.in b/openwrt/Config.in index 31ddbac6d7..576e4826da 100644 --- a/openwrt/Config.in +++ b/openwrt/Config.in @@ -11,7 +11,6 @@ config BR2_HAVE_DOT_CONFIG default y choice - prompt "Target Architecture" default BR2_mipsel help Stuff @@ -65,7 +64,7 @@ config BR2_ARCH default "i386" if BR2_i386 default "m68k" if BR2_m68k default "mips" if BR2_mips - default "mipsel" if BR2_mipsel + default "mipsel" if BR2_mipsel || !CONFIG_DEVEL default "powerpc" if BR2_powerpc default "sh3" if BR2_sh3 default "sh3eb" if BR2_sh3eb @@ -74,36 +73,21 @@ config BR2_ARCH default "sparc" if BR2_sparc -menu "Build options" - config BR2_WGET - string "Wget command" + string default "wget --passive-ftp -nd" config BR2_TAR_VERBOSITY - bool "Tar verbose" + bool default n config BR2_STAGING_DIR - string "Toolchain and header file location?" + string default "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)" - help - This is the location where the toolchain will be installed. - Since the toolchain will not work if it is moved from this - location, it is important for people wishing to package up - a uClibc toolchain that this be set to the location in which - the toolchain will be used. - - Most people will leave this set to the default value of - "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)". config BR2_JLEVEL - int "Number of jobs to run simultaneously" + int default "1" - help - Number of jobs to run simultanesouly - -endmenu source "toolchain/Config.in" source "package/Config.in" diff --git a/openwrt/Config.in.devel b/openwrt/Config.in.devel new file mode 100644 index 0000000000..38e79b9e60 --- /dev/null +++ b/openwrt/Config.in.devel @@ -0,0 +1,114 @@ +# + +mainmenu "OpenWRT Configuration" + +config MODULES + bool + default y + +config BR2_HAVE_DOT_CONFIG + bool + default y + +config CONFIG_DEVEL + bool + default y + +choice + prompt "Target Architecture" if CONFIG_DEVEL + default BR2_mipsel + help + Stuff + +config BR2_arm + bool "arm" + +config BR2_armeb + bool "armeb" + +config BR2_cris + bool "cris" + +config BR2_i386 + bool "i386" + +config BR2_m68k + bool "m68k" + +config BR2_mips + bool "mips" + +config BR2_mipsel + bool "mipsel" + +config BR2_powerpc + bool "powerpc" + +config BR2_sh3 + bool "sh3" + +config BR2_sh3eb + bool "sh3eb" + +config BR2_sh4 + bool "sh4" + +config BR2_sh4eb + bool "sh4eb" + +config BR2_sparc + bool "sparc" + +endchoice + +config BR2_ARCH + string + default "arm" if BR2_arm + default "armeb" if BR2_armeb + default "cris" if BR2_cris + default "i386" if BR2_i386 + default "m68k" if BR2_m68k + default "mips" if BR2_mips + default "mipsel" if BR2_mipsel + default "powerpc" if BR2_powerpc + default "sh3" if BR2_sh3 + default "sh3eb" if BR2_sh3eb + default "sh4" if BR2_sh4 + default "sh4eb" if BR2_sh4eb + default "sparc" if BR2_sparc + + +menu "Build options" + +config BR2_WGET + string "Wget command" + default "wget --passive-ftp -nd" + +config BR2_TAR_VERBOSITY + bool "Tar verbose" + default n + +config BR2_STAGING_DIR + string "Toolchain and header file location?" + default "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)" + help + This is the location where the toolchain will be installed. + Since the toolchain will not work if it is moved from this + location, it is important for people wishing to package up + a uClibc toolchain that this be set to the location in which + the toolchain will be used. + + Most people will leave this set to the default value of + "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)". + +config BR2_JLEVEL + int "Number of jobs to run simultaneously" + default "1" + help + Number of jobs to run simultanesouly + +endmenu + +source "toolchain/Config.in.devel" +source "package/Config.in" +source "target/Config.in" diff --git a/openwrt/Makefile b/openwrt/Makefile index 3d9bcb3870..fd2a4ad8e4 100644 --- a/openwrt/Makefile +++ b/openwrt/Makefile @@ -24,7 +24,11 @@ #-------------------------------------------------------------- TOPDIR=${shell pwd} export TOPDIR +ifneq ($(DEVELOPER),) +CONFIG_CONFIG_IN = Config.in.devel +else CONFIG_CONFIG_IN = Config.in +endif CONFIG_DEFCONFIG = .defconfig CONFIG = package/config diff --git a/openwrt/package/busybox/Config.in b/openwrt/package/busybox/Config.in index 4f72994af5..4187ed0bef 100644 --- a/openwrt/package/busybox/Config.in +++ b/openwrt/package/busybox/Config.in @@ -12,6 +12,7 @@ config BR2_PACKAGE_BUSYBOX config BR2_PACKAGE_BUSYBOX_SNAPSHOT bool "Use the daily snapshot of busybox?" depends BR2_PACKAGE_BUSYBOX + depends CONFIG_DEVEL default n help Use the latest busybox CVS snapshot instead of release. diff --git a/openwrt/toolchain/Config.in b/openwrt/toolchain/Config.in index 5b3fe70125..756deddd24 100644 --- a/openwrt/toolchain/Config.in +++ b/openwrt/toolchain/Config.in @@ -1,56 +1,29 @@ # -menu "Toolchain Options" - - source "toolchain/uClibc/Config.in" source "toolchain/binutils/Config.in" source "toolchain/gcc/Config.in" source "toolchain/ccache/Config.in" - -comment "Common Toolchain Options" +if CONFIG_DEVEL + comment "Common Toolchain Options" +endif config BR2_ENABLE_MULTILIB - bool "Enable multilib support?" + bool default n - help - If you want multilib enabled, enable this... config BR2_LARGEFILE - bool "Enable large file (files > 2 GB) support?" + bool depends on !BR2_cris default y - help - Enable large file (files > 2 GB) support config BR2_SOFT_FLOAT - bool "Use software floating point by default" + bool default n depends on BR2_arm || BR2_mips || BR2_powerpc - help - If your target CPU does not have a Floating Point Unit (FPU) or a - kernel FPU emulator, but you still wish to support floating point - functions, then everything will need to be compiled with soft floating - point support (-msoft-float). - - Most people will answer N. config BR2_TARGET_OPTIMIZATION - string "Target Optimizations" + string default "-Os -pipe -mips32 -mtune=mips32" - help - Optimizations to use when building for the target host. - -# Might be worth experimenting with for gcc 3.4.x. -#GCC_WITH_CPU:= -#GCC_WITH_ARCH:= -#GCC_WITH_TUNE:= - -#GCC_WITH_CPU:=--with-cpu= -#GCC_WITH_ARCH:=--with-arch= -#GCC_WITH_TUNE:=--with-tune= - - -endmenu diff --git a/openwrt/toolchain/Config.in.devel b/openwrt/toolchain/Config.in.devel new file mode 100644 index 0000000000..00434607a0 --- /dev/null +++ b/openwrt/toolchain/Config.in.devel @@ -0,0 +1,55 @@ +# + +menu "Toolchain Options" + +source "toolchain/uClibc/Config.in" +source "toolchain/binutils/Config.in" +source "toolchain/gcc/Config.in" +source "toolchain/ccache/Config.in" + + +comment "Common Toolchain Options" + +config BR2_ENABLE_MULTILIB + bool "Enable multilib support?" + default n + help + If you want multilib enabled, enable this... + +config BR2_LARGEFILE + bool "Enable large file (files > 2 GB) support?" + depends on !BR2_cris + default y + help + Enable large file (files > 2 GB) support + +config BR2_SOFT_FLOAT + bool "Use software floating point by default" + default n + depends on BR2_arm || BR2_mips || BR2_powerpc + help + If your target CPU does not have a Floating Point Unit (FPU) or a + kernel FPU emulator, but you still wish to support floating point + functions, then everything will need to be compiled with soft floating + point support (-msoft-float). + + Most people will answer N. + +config BR2_TARGET_OPTIMIZATION + string "Target Optimizations" + default "-Os -pipe -mips32 -mtune=mips32" + help + Optimizations to use when building for the target host. + +# Might be worth experimenting with for gcc 3.4.x. +#GCC_WITH_CPU:= +#GCC_WITH_ARCH:= +#GCC_WITH_TUNE:= + +#GCC_WITH_CPU:=--with-cpu= +#GCC_WITH_ARCH:=--with-arch= +#GCC_WITH_TUNE:=--with-tune= + + +endmenu + diff --git a/openwrt/toolchain/binutils/Config.in b/openwrt/toolchain/binutils/Config.in index 4b06f1aa9a..3fe1750a42 100644 --- a/openwrt/toolchain/binutils/Config.in +++ b/openwrt/toolchain/binutils/Config.in @@ -1,9 +1,11 @@ # Choose binutils version. -comment "Binutils Options" +if CONFIG_DEVEL + comment "Binutils Options" +endif choice - prompt "Binutils Version" + prompt "Binutils Version" if CONFIG_DEVEL default BR2_BINUTILS_VERSION_2_14_90_0_8 help Select the version of binutils you wish to use. @@ -56,7 +58,7 @@ config BR2_BINUTILS_VERSION string default "2.14.90.0.6" if BR2_BINUTILS_VERSION_2_14_90_0_6 default "2.14.90.0.7" if BR2_BINUTILS_VERSION_2_14_90_0_7 - default "2.14.90.0.8" if BR2_BINUTILS_VERSION_2_14_90_0_8 + default "2.14.90.0.8" if BR2_BINUTILS_VERSION_2_14_90_0_8 || !CONFIG_DEVEL default "2.15" if BR2_BINUTILS_VERSION_2_15 default "2.15.90.0.1" if BR2_BINUTILS_VERSION_2_15_90_0_1 default "2.15.90.0.0.1.1" if BR2_BINUTILS_VERSION_2_15_90_0_1_1 diff --git a/openwrt/toolchain/ccache/Config.in b/openwrt/toolchain/ccache/Config.in index a265375c40..9cd6f0b11d 100644 --- a/openwrt/toolchain/ccache/Config.in +++ b/openwrt/toolchain/ccache/Config.in @@ -1,9 +1,10 @@ # - -comment "Ccache Options" +if CONFIG_DEVEL + comment "Ccache Options" +endif config BR2_CCACHE - bool "Enable ccache support?" + bool "Enable ccache support?" if CONFIG_DEVEL default y help Enable ccache support? diff --git a/openwrt/toolchain/gcc/Config.in b/openwrt/toolchain/gcc/Config.in index 9dd7d0ca41..7d70d0691c 100644 --- a/openwrt/toolchain/gcc/Config.in +++ b/openwrt/toolchain/gcc/Config.in @@ -2,10 +2,12 @@ # WARNING -- 2.95 currently only builds for i386, arm, mips*, and powerpc. # WARNING -- 2.95 does not currently build natively for the target. -comment "Gcc Options" +if CONFIG_DEVEL + comment "Gcc Options" +endif choice - prompt "GCC compiler Version" + prompt "GCC compiler Version" if CONFIG_DEVEL default BR2_GCC_VERSION_3_3_5 help Select the version of gcc you wish to use. @@ -35,10 +37,9 @@ endchoice config BR2_GCC_VERSION string - default "2.95" if BR2_GCC_VERSION_2_95 default "3.3.3" if BR2_GCC_VERSION_3_3_3 default "3.3.4" if BR2_GCC_VERSION_3_3_4 - default "3.3.5" if BR2_GCC_VERSION_3_3_5 + default "3.3.5" if BR2_GCC_VERSION_3_3_5 || !CONFIG_DEVEL default "3.4.0" if BR2_GCC_VERSION_3_4_0 default "3.4.1" if BR2_GCC_VERSION_3_4_1 default "3.4.2" if BR2_GCC_VERSION_3_4_2 @@ -53,13 +54,15 @@ config BR2_GCC_USE_SJLJ_EXCEPTIONS but not dynamic. So use setjmp/longjmp exceptions by default. config BR2_EXTRA_GCC_CONFIG_OPTIONS - string "Additional gcc options" + string + prompt "Additional gcc options" if CONFIG_DEVEL default "" help Any additional gcc options you may want to include.... config BR2_INSTALL_LIBSTDCPP - bool "Build/install c++ compiler and libstdc++?" + bool + prompt "Build/install c++ compiler and libstdc++?" if CONFIG_DEVEL default n help Build/install c++ compiler and libstdc++? diff --git a/openwrt/toolchain/uClibc/Config.in b/openwrt/toolchain/uClibc/Config.in index 0e4b29a7df..09453bff3e 100644 --- a/openwrt/toolchain/uClibc/Config.in +++ b/openwrt/toolchain/uClibc/Config.in @@ -1,10 +1,12 @@ # Choose uClibc options # - -comment "uClibc Options" +if CONFIG_DEVEL + comment "uClibc Options" +endif config BR2_UCLIBC_VERSION_SNAPSHOT - bool "Use the daily snapshot of uClibc?" + bool + prompt "Use the daily snapshot of uClibc?" if CONFIG_DEVEL default n help Would you like to use the latest daily snapshot? @@ -15,7 +17,8 @@ config BR2_USE_UCLIBC_SNAPSHOT depends on BR2_UCLIBC_VERSION_SNAPSHOT config BR2_ENABLE_LOCALE - bool "Enable locale/gettext/i18n support?" + bool + prompt "Enable locale/gettext/i18n support?" if CONFIG_DEVEL default n help Enable locale/gettext/i18n support? -- 2.30.2