fritz-tools: Find zlib.h header file Add the necessary changes to CMakeLists.txt to search zlib.h. Fixes build issues with external toolchains that don't have STAGING_DIR in the default search path. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
bcm53xx: backport MDIO bus clock initialization fix Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
bcm53xx: backport USB 3.0 PHY patch cleaning all writes It doesn't change any bevahior just cleanes up the code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
perf: Disable perf for ARC770 only, enable for ARC HS38 Toolchain built for ARCv1 (read for ARC700 cores) by default has disabled atomic ops (-mno-atomic). When we build Linux kernel for ARC770 which has LL/SC instructions and thus may handle normally atomic ops we explicitly add "-matomic" in CFLAGS. But since user-space perf utility has no way to extract CPU config options from Kconfig/defconfig it uses compiler default settings. In case of ARCv2 (read ARC HS38) atomics are enabled by default and so perf builds perfectly fine thus reenabling perf for ARC HS38 (actually for non-ARC700 targets). Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
build: new fixes for symlinked .config handling When running "make {config|defconfig|oldconfig}" with symlinked .config (e.g. to env/.config) it renames symlink to .config.old, creates new .config file, and writes the updated configuration into it. This breaks the desired workflow when changes in the configuration can be checked using "scripts/env diff" and commited using "scripts/env save". Since the env/.config file is not updated. The things become even worse when working with feeds, since feeds script quite often silently invokes "make {oldconfig|defconfig}" and breaks the symlink. Fix this issue by exporting KCONFIG_OVERWRITECONFIG=1, which forces mconf to overwrite the .config content, instead of renaming it and creating a new file. This variable is set only if .config is a symlink, otherwise the variable is not exported and the old behaviour is preserved. This change uses the same behaviour as "make menucofig", which has already been fixed in commit 5bf98b1acc3b6b178f8954c5075a58e1e6a99d6a. Also make a tiny cosmetic update to the "make menuconfig" target code layout to make it look like other config handling targets. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
ramips: add support for Asus RT-AC51U Specification: - SoC: MediaTek MT7620A (580 MHz) - RAM: 64 MiB (Winbond W9751G6JB-25) - Flash: 16 MiB (Spansion S25FL128SAIF00) - LAN: x4 100M - WAN: x1 100M - Others: USB 2.0, reset button, wps button and 9 LEDs Issues: - 5 GHz band is not functional (missing driver support) Installation: Asus windows recovery tool: - install the Asus firmware restoration utility - unplug the router, hold the reset button while powering it on - release when the power LED flashes slowly - specify a static IP on your computer: IP address: 192.168.1.75; Subnet mask 255.255.255.0 - Start the Asus firmware restoration utility, specify the sysupgrade image, and press upload TFTP Recovery method: - set computer to a static ip, 192.168.1.75 - connect computer to the LAN 1 port of the router - hold the reset button while powering on the router for a few seconds - send firmware image using a tftp client; i.e from linux: $ tftp tftp> binary tftp> connect 192.168.1.1 tftp> put lede-ramips-mt7620-rt-ac51u-squashfs-sysupgrade.bin tftp> quit Signed-off-by: Ørjan Malde <foxyred333@gmail.com>
ramips: add new device ZyXEL Keenetic as kn This device exactly same as NBG-419N but with USB port and USB Led. Specification: - SoC: Ralink RT3052 (MIPS24Kc) @384MHz - RAM: 32 MiB - Flash: 8 MiB - WLAN: WiSoC 2T2R/300Mbps (2.4GHz) - LAN: 4x100M - WAN: 1x100M - USB: 1x2.0 Installation via serial console (57600 8N1) from TFTP server - rename the firmware to something shorter, for example "sysupgrade.bin" (max. 32 chars) - copy firmware TFTP server's directory - when you power on device, and see U-Boot log, immediatly push "2" once. - You will see this message: 2: System Load Linux Kernel then write to Flash via TFTP. Warning!! Erase Linux in Flash then burn new one. Are you sure? - Push "y", and enter: device IP, then TFTP server's IP, and then image firmware file name. The firmware will be downloaded within ~30 seconds and flashed to the device (It will take about 2 minutes). Signed-off-by: Alexey Belyaev <spider@spider.vc> [squash commits, compact commit message, fix compatible string, remove superfluous pinmuxes] Signed-off-by: Mathias Kresin <dev@kresin.me>
dnsmasq: add interface-name uci list. This patch adds the interface-name option for each dhcp config in /etc/config/dhcp. With the interface_name option users can define a DNS name for each dhcp section that will be resolved by dnsmasq with the underlaying interface address. For example: config dhcp 'lan' option interface 'lan' ... list interface_name 'home.lan' ... Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
lantiq: fix avm fritz box mac addresses It has been shown that the Fritz boxes have the correct mac address set in the wireless calibration data/eeeprom. Use this mac address as base for the ethernet and xdsl interface increment/decrement the address to match the values stored in the tffs. Signed-off-by: Mathias Kresin <dev@kresin.me>