projects / openwrt / staging / florian.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
enable start-stop-daemon by default, i want to use this to clean up a few init script...
[openwrt/staging/florian.git] / target / linux / amazon-2.6 / files / drivers / atm / amazon_tpe.c
1 /*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
6 *
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
11 *
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
15 */
16 //-----------------------------------------------------------------------
17 /*
18 * Description:
19 * Driver for Infineon Amazon TPE
20 */
21 //-----------------------------------------------------------------------
22 /* Author: peng.liu@infineon.com
23 * Created: 12-April-2004
24 */
25 //-----------------------------------------------------------------------
26 /* History
27 * Last changed on: 13 Oct. 2004
28 * Last changed by: peng.liu@infineon.com
29 * Last changed on: 28 Jan. 2004
30 * Last changed by: peng.liu@infineon.com
31 * Last changed Reason:
32 * - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes)
33 */
34 // 507261:tc.chen 2005/07/26 re-organize code address map to improve performance.
35 // 507281:tc.chen 2005/07/28 fix f4 segment isssue
36 /* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */
37
38 #ifndef __KERNEL__
39 #define __KERNEL__
40 #endif
41 #ifndef EXPORT_SYMTAB
42 #define EXPORT_SYMTAB
43 #endif
44
45 /*TPE level loopback, bypass AWARE DFE */
46 #undef TPE_LOOPBACK
47
48 /* enable debug options */
49 #undef AMAZON_ATM_DEBUG
50
51 /* enable rx error packet analysis */
52 #undef AMAZON_ATM_DEBUG_RX
53
54 /* test AAL5 Interrupt */
55 #undef AMAZON_TPE_TEST_AAL5_INT
56
57 /* dump packet */
58 #undef AMAZON_TPE_DUMP
59
60 /* read ARC register*/
61 /* this register is located in side DFE module*/
62 #undef AMAZON_TPE_READ_ARC
63
64 /* software controlled reassembly */
65 #undef AMAZON_TPE_SCR
66
67 /* recovery from AAL5 bug */
68 #undef AMAZON_TPE_AAL5_RECOVERY
69
70 #if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
71 #define ALPHAEUS_BASE_ADDR 0x31c00
72 #define A_CFG_ADDR (ALPHAEUS_BASE_ADDR+0x04)
73 #define AR_CB0_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x2c)
74 #define AR_CB1_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x30)
75 #define AT_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x90)
76 #define AR_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x1a0)
77 #define AR_CD_CNT0_ADDR (ALPHAEUS_BASE_ADDR+0x1c8)
78 #endif
79
80 #include <linux/module.h>
81 #include <linux/config.h>
82 #include <linux/init.h>
83 #include <linux/kernel.h>
84 #include <linux/slab.h>
85 #include <linux/fs.h>
86 #include <linux/types.h>
87 #include <linux/errno.h>
88 #include <linux/time.h>
89 #include <linux/atm.h>
90 #include <linux/atmdev.h>
91 #include <linux/netdevice.h>
92 #include <asm/byteorder.h>
93 #include <asm/io.h>
94 #include <asm/uaccess.h>
95 #include <asm/system.h>
96 #include <asm/atomic.h>
97 #include <asm/bitops.h>
98 #include <asm/system.h>
99
100 #include <asm/amazon/amazon.h>
101 #include <asm/amazon/irq.h>
102
103 #include <linux/in.h>
104 #include <linux/netdevice.h>
105 #include <linux/etherdevice.h>
106 #include <linux/ip.h>
107 #include <linux/tcp.h>
108 #include <linux/skbuff.h>
109 #include <linux/in6.h>
110 #include <linux/delay.h>
111 #include <asm/amazon/atm_defines.h>
112 #include <asm/amazon/amazon_dma.h>
113 #include <asm/amazon/amazon_tpe.h>
114
115 #if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
116 #include <asm/amazon/amazon_mei.h>
117 #include <asm/amazon/amazon_mei_app.h>
118 #endif
119
120 #define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args)
121
122 /***************************************** External Functions *******************************************/
123 extern unsigned int amazon_get_fpi_hz(void);
124 extern void mask_and_ack_amazon_irq(unsigned int irq_nr);
125 extern void amz_push_oam(unsigned char *);
126
127 //amazon_mei.c
128 #if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY)
129 extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize);
130 extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize);
131 #endif
132
133 /***************************************** Internal Functions *******************************************/
134 int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data);
135 /***************************************** Global Data *******************************************/
136 amazon_atm_dev_t g_atm_dev; //device data
137 static struct tq_struct swex_start_task; //BH task
138 static struct tq_struct swex_complete_task; //BH task
139 #ifdef AMAZON_TPE_SCR
140 static struct tq_struct a5r_task; //BH task
141 #endif
142 static struct dma_device_info g_dma_dev; //for DMA
143 static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM];
144 static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM];
145 static u8 g_oam_cell[AMAZON_AAL0_SDU+4]; //for OAM cells
146 #ifdef AMAZON_CHECK_LINK
147 static int adsl_link_status; //ADSL link status, 0:down, 1:up
148 #endif //AMAZON_CHECK_LINK
149 /***************************************** Module Parameters *************************************/
150 // Parameter Definition for module
151 static int port_enable0 = 1; // Variable for parameter port_enable0
152 static int port_enable1 = 0; // Variable for parameter port_enable1
153 static int port_max_conn0 = 15; // Variable for parameter port_max_conn0
154 static int port_max_conn1 = 0; // Variable for parameter port_max_conn1
155 static int port_cell_rate_up0 = 7500; // Variable for parameter port_cell_rate_up0
156 static int port_cell_rate_up1 = 7500; // Variable for parameter port_cell_rate_up1
157
158
159 static int qsb_tau = 1; // Variable for parameter qsb_tau
160 static int qsb_srvm = 0xf; // Variable for parameter qsb_srvm
161 static int qsb_tstep = 4 ; // Variable for parameter qsb_tstep
162
163 static int cbm_nrt = 3900; // Variable for parameter cbm_nrt
164 static int cbm_clp0 =3500; // Variable for parameter cbm_clp0
165 static int cbm_clp1 =3200; // Variable for parameter cbm_clp1
166 static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS; // Variable for parameter cbm_free_cell_no
167
168 static int a5_fill_pattern = 0x7e; // Variable for parameter a5_fill_pattern '~'
169 static int a5s_mtu = 0x700; // mtu for tx
170 static int a5r_mtu = 0x700; // mtu for rx
171
172 static int oam_q_threshold = 64; // oam queue threshold, minium value 64
173 static int rx_q_threshold = 1000; // rx queue threshold, minium value 64
174 static int tx_q_threshold = 800; // tx queue threshold, minium value 64
175
176 MODULE_PARM(port_max_conn0, "i");
177 MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0");
178 MODULE_PARM(port_max_conn1, "i");
179 MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1");
180 MODULE_PARM(port_enable0, "i");
181 MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled");
182 MODULE_PARM(port_enable1, "i");
183 MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled");
184 MODULE_PARM(port_cell_rate_up0, "i");
185 MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s");
186 MODULE_PARM(port_cell_rate_up1, "i");
187 MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s");
188
189 MODULE_PARM(qsb_tau,"i");
190 MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0");
191 MODULE_PARM(qsb_srvm, "i");
192 MODULE_PARM_DESC(qsb_srvm, "Maximum burst size");
193 MODULE_PARM(qsb_tstep, "i");
194 MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4");
195
196 MODULE_PARM(cbm_nrt, "i");
197 MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer");
198 MODULE_PARM(cbm_clp0, "i");
199 MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0");
200 MODULE_PARM(cbm_clp1, "i");
201 MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1");
202 MODULE_PARM(cbm_free_cell_no, "i");
203 MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager");
204
205 MODULE_PARM(a5_fill_pattern, "i");
206 MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames");
207 MODULE_PARM(a5s_mtu, "i");
208 MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream");
209 MODULE_PARM(a5r_mtu, "i");
210 MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream");
211
212 MODULE_PARM(oam_q_threshold, "i");
213 MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold");
214
215 MODULE_PARM(rx_q_threshold, "i");
216 MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold");
217
218 MODULE_PARM(tx_q_threshold, "i");
219 MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold");
220
221 /***************************************** local functions *************************************/
222 /* Brief: valid QID
223 * Return: 1 if valid
224 * 0 if not
225 */
226 static inline int valid_qid(int qid)
227 {
228 return ( (qid>0) && (qid<AMAZON_ATM_MAX_QUEUE_NUM));
229 }
230
231 /*
232 * Brief: align to 16 bytes boundary
233 * Parameter:
234 * skb
235 * Description:
236 * use skb_reserve to adjust the data pointer
237 * don't change head pointer
238 * pls allocate extrac 16 bytes before call this function
239 */
240 static void inline alloc_align_16(struct sk_buff * skb)
241 {
242 if ( ( ((u32) (skb->data)) & 15) != 0){
243 AMAZON_TPE_DMSG("need to adjust the alignment manually\n");
244 skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) );
245 }
246
247 }
248
249 /*
250 * Brief: initialize the device according to the module paramters
251 * Return: not NULL - ok
252 * NULL - fails
253 * Description: arrange load parameters and call the hardware initialization routines
254 */
255 static void atm_init_parameters(amazon_atm_dev_t *dev)
256 {
257 //port setting
258 dev->ports[0].enable = port_enable0;
259 dev->ports[0].max_conn = port_max_conn0;
260 dev->ports[0].tx_max_cr = port_cell_rate_up0;
261 if (port_enable1){
262 dev->ports[1].enable = port_enable1;
263 dev->ports[1].max_conn = port_max_conn1;
264 dev->ports[1].tx_max_cr = port_cell_rate_up1;
265 }
266
267 //aal5
268 dev->aal5.padding_byte = a5_fill_pattern;
269 dev->aal5.tx_max_sdu = a5s_mtu;
270 dev->aal5.rx_max_sdu = a5r_mtu;
271
272 //cbm
273 dev->cbm.nrt_thr = cbm_nrt;
274 dev->cbm.clp0_thr = cbm_clp0;
275 dev->cbm.clp1_thr = cbm_clp1;
276 dev->cbm.free_cell_cnt = cbm_free_cell_no;
277
278 //qsb
279 dev->qsb.tau = qsb_tau;
280 dev->qsb.tstepc =qsb_tstep;
281 dev->qsb.sbl = qsb_srvm;
282
283 //allocate on the fly
284 dev->cbm.mem_addr = NULL;
285 dev->cbm.qd_addr = NULL;
286 }
287
288
289 /* Brief: Find QID for VCC
290 * Parameters: vcc - VCC data structure
291 * Return Value: -EINVAL - VCC not found
292 * qid - QID for this VCC
293 * Description:
294 * This function returns the QID of a given VCC
295 */
296 static int amazon_atm_get_queue(struct atm_vcc* vcc)
297 {
298 int i;
299 for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
300 if (g_atm_dev.queues[i].vcc == vcc) return i;
301 }
302 return -EINVAL;
303 }
304
305
306 /*
307 * Brief: Find QID for VPI/VCI
308 * Parameters: vpi - VPI to found
309 * vci - VCI to found
310 *
311 * Return Value: -EINVAL - VPI/VCI not found
312 * qid - QID for this VPI/VCI
313 *
314 * Description:
315 * This function returns the QID for a given VPI/VCI. itf doesn't matter
316 */
317 static int amazon_atm_find_vpivci(u8 vpi, u16 vci)
318 {
319 int i;
320 struct atm_vcc * vcc;
321 for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
322 if ( (vcc = g_atm_dev.queues[i].vcc)!= NULL) {
323 if ((vcc->vpi == vpi) && (vcc->vci == vci)) return i;
324 }
325 }
326 return -EINVAL;
327 }
328
329 /* Brief: Find QID for VPI
330 * Parameters: vpi - VPI to found
331 * Return Value: -EINVAL - VPI not found
332 * qid - QID for this VPI
333 *
334 * Description:
335 * This function returns the QID for a given VPI. itf and VCI don't matter
336 */
337 static int amazon_atm_find_vpi(u8 vpi)
338 {
339 int i;
340 for (i=0;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
341 if ( g_atm_dev.queues[i].vcc!= NULL) {
342 if (g_atm_dev.queues[i].vcc->vpi == vpi) return i;
343 }
344 }
345 return -EINVAL;
346 }
347
348 /*
349 * Brief: Clears QID entries for VCC
350 *
351 * Parameters: vcc - VCC to found
352 *
353 * Description:
354 * This function searches for the given VCC and sets it to NULL if found.
355 */
356 static inline void amazon_atm_clear_vcc(int i)
357 {
358 g_atm_dev.queues[i].vcc = NULL;
359 g_atm_dev.queues[i].free = 1;
360 }
361
362
363 /*
364 * Brief: dump skb data
365 */
366 static inline void dump_skb(u32 len, char * data)
367 {
368 #ifdef AMAZON_TPE_DUMP
369 int i;
370 for(i=0;i<len;i++){
371 printk("%2.2x ",(u8)(data[i]));
372 if (i % 16 == 15)
373 printk("\n");
374 }
375 printk("\n");
376 #endif
377 }
378
379 /*
380 * Brief: dump queue descriptor
381 */
382 static inline void dump_qd(int qid)
383 {
384 #ifdef AMAZON_TPE_DUMP
385 u8 * qd_addr;
386 if (valid_qid(qid) != 1) return;
387 qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
388 AMAZON_TPE_EMSG("qid: %u [%8x][%8x][%8x][%8x]\n", qid
389 ,readl(qd_addr+qid*CBM_QD_SIZE+0x0)
390 ,readl(qd_addr+qid*CBM_QD_SIZE+0x4)
391 ,readl(qd_addr+qid*CBM_QD_SIZE+0x8)
392 ,readl(qd_addr+qid*CBM_QD_SIZE+0xc));
393 #endif
394 }
395
396 /*
397 * Brief: release TX skbuff
398 */
399 static inline void amazon_atm_free_tx_skb_vcc(struct atm_vcc *vcc, struct sk_buff *skb)
400 {
401 if ( vcc->pop != NULL) {
402 vcc->pop(vcc, skb);
403 } else {
404 dev_kfree_skb_any(skb);
405 }
406 }
407 /*
408 * Brief: release TX skbuff
409 */
410 static inline void amazon_atm_free_tx_skb(struct sk_buff *skb)
411 {
412 struct atm_vcc* vcc = ATM_SKB(skb)->vcc;
413 if (vcc!=NULL){
414 amazon_atm_free_tx_skb_vcc(vcc,skb);
415 } else {
416 dev_kfree_skb_any(skb);//fchang:Added
417 }
418 }
419
420 /* Brief: divide by 64 and round up
421 */
422 static inline u32 divide_by_64_round_up(int input)
423 {
424 u32 tmp1;
425 tmp1 = (u32) input;
426 tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64);
427 if (tmp1 == 0) tmp1 = 1;
428 return tmp1;
429 }
430
431 /*
432 * Brief: statistics
433 */
434 #ifdef AMAZON_ATM_DEBUG
435 static inline void queue_statics(int qid, qs_t idx)
436 {
437 if (valid_qid(qid)){
438 g_atm_dev.queues[qid].qs[idx]++;
439 }
440 }
441 #else //not AMAZON_ATM_DEBUG
442 static inline void queue_statics(int qid, qs_t idx){}
443 #endif //AMAZON_ATM_DEBUG
444
445
446 /* Brief: set dma tx full, i.e. there is no available descriptors
447 */
448 static void inline atm_dma_full(void)
449 {
450 AMAZON_TPE_DMSG("ch0 is full\n");
451 atomic_set(&g_atm_dev.dma_tx_free_0,0);
452 }
453
454 /*
455 * Brief set dma tx free (at least one descript is available)
456 */
457 inline static void atm_dma_free(void)
458 {
459 AMAZON_TPE_DMSG("ch0 is free\n");
460 atomic_set(&g_atm_dev.dma_tx_free_0,1);
461 }
462
463
464 /* Brief: return the status of DMA TX descriptors
465 * Parameters: TX channel (DMA_TX_CH0, TX_CH1)
466 * Return:
467 * 1: there are availabel TX descriptors
468 * 0: no available
469 * Description:
470 *
471 */
472 inline int dma_may_send(int ch)
473 {
474 if (atomic_read(&g_atm_dev.dma_tx_free_0)){
475 return 1;
476 }
477 return 0;
478 }
479
480 /******************************* global functions *********************************/
481 /*
482 * Brief: SWIE Cell Extraction Start Routine
483 * and task routine for swex_complete_task
484 * Parameters: irq_stat - interrupt status
485 *
486 * Description:
487 * This is the routine for extracting cell. It will schedule itself if the hardware is busy.
488 * This routine runs in interrupt context
489 */
490 void amazon_atm_swex(void * irq_stat)
491 {
492 u32 ex_stat=0;
493 u32 addr;
494 // Read extraction status register
495 ex_stat = readl(CBM_HWEXSTAT0_ADDR);
496
497 // Check if extraction/insertion is in progress
498 if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) {
499 AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
500 swex_start_task.data = irq_stat;
501 queue_task(&swex_start_task, &tq_immediate);
502 mark_bh(IMMEDIATE_BH);
503 }else {
504 // Extract QID
505 g_atm_dev.swie.qid = (((u32)irq_stat) >> 24);
506 AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid);
507 //read status word
508 addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
509 addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0);
510 addr = KSEG1ADDR(addr);
511 g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK;
512 AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw);
513
514 // Start extraction
515 AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR);
516 AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR);
517 }
518 }
519 #ifdef AMAZON_TPE_SCR
520 u32 g_a5r_wait=0;
521 /*
522 * Brief: AAL5 Packet Extraction Routine and task routine for a5r_task
523 * Parameters: irq_stat - interrupt status
524 *
525 * Description:
526 * This is the routine for extracting frame. It will schedule itself if the hardware is busy.
527 * This routine runs in interrupt context
528 */
529 void amazon_atm_a5r(void* qid)
530 {
531 volatile u32 ex_stat=0;
532 u32 addr;
533 u32 a5r_wait=0;
534
535 ex_stat = readl(CBM_HWEXSTAT0_ADDR);
536 #if 0
537 // Check if extraction/insertion is in progress
538 if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
539 AMAZON_TPE_DMSG(" extraction in progress. Will wait\n");
540 a5r_task.data = qid;
541 queue_task(&a5r_task, &tq_immediate);
542 mark_bh(IMMEDIATE_BH);
543 }else {
544 AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid);
545 // Start extraction
546 AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
547 AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
548 }
549 #else
550 //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) {
551 while ( ex_stat != 0x80){
552 a5r_wait++;
553 ex_stat = readl(CBM_HWEXSTAT0_ADDR);
554 #if 0
555 if (a5r_wait >= 0xffffff){
556 a5r_wait=0;
557 printk(".");
558 }
559 #endif
560 }
561 if (a5r_wait > g_a5r_wait){
562 g_a5r_wait = a5r_wait;
563 }
564 AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
565 AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
566 #endif
567 }
568
569 #endif //AMAZON_TPE_SCR
570
571 /* Brief: Handle F4/F5 OAM cell
572 * Return:
573 * 0 ok
574 * <0 fails
575 */
576 static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status)
577 {
578 struct atm_vcc* vcc=NULL;
579 int qid;
580 if (!status&SWIE_EOAM_MASK){
581 AMAZON_TPE_EMSG("unknown cell received, discarded\n");
582 goto amazon_handle_oam_cell_err_exit;
583 }else if (status&SWIE_ECRC10ERROR_MASK){
584 AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status);
585 goto amazon_handle_oam_cell_err_exit;
586 }else{
587 if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){
588 //F4 level (VPI) OAM, Assume duplex
589 qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET;
590 }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){
591 //F5 level (VCI) OAM, Assume duplex
592 qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET;
593 }else{
594 qid = -1;
595 AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n");
596 goto amazon_handle_oam_cell_err_exit;
597 }
598 }
599 if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){
600 //TODO, should we do this for ALL OAM types? (Actually only User and CC)
601 g_atm_dev.queues[qid].access_time=xtime;
602 if (vcc->push_oam){
603 (*vcc->push_oam)(vcc,data);
604 }else{
605 amz_push_oam(data);
606 }
607 }else{
608 AMAZON_TPE_EMSG("no VCC yet\n");
609 goto amazon_handle_oam_cell_err_exit;
610 }
611 return 0;
612 amazon_handle_oam_cell_err_exit:
613 dump_skb(AMAZON_AAL0_SDU,(char *)data);
614 return -1;
615 }
616
617 /* Brief: SWIE Cell Extraction Finish Routine
618 * and task routine for swex_complete_task
619 * Description:
620 * 1.Allocate a buffer of type struct sk_buff
621 * 2.Copy the data from the temporary memory to this buffer
622 * 3.Push the data to upper layer
623 * 4.Update the statistical data if necessary
624 * 5.Release the temporary data
625
626 */
627 void amazon_atm_swex_push(void * data)
628 {
629 struct atm_vcc* vcc=NULL;
630 struct sk_buff* skb=NULL;
631 struct amazon_atm_cell_header * cell_header;
632 u32 status;
633 int qid;
634 if (!data){
635 AMAZON_TPE_EMSG("data is NULL\n");
636 return;
637 }
638 qid = ((u8*)data)[AMAZON_AAL0_SDU];
639 status = ((u32*)data)[ATM_AAL0_SDU/4];
640 cell_header = (struct amazon_atm_cell_header *) data;
641 if (valid_qid(qid) != 1){
642 AMAZON_TPE_EMSG("error qid: %u\n",qid);
643 AMAZON_TPE_EMSG("unknown cells recieved\n");
644 }else if (qid == AMAZON_ATM_OAM_Q_ID){
645 //OAM or RM or OTHER cell
646 //Find real connection
647
648 #ifdef IKOS_MINI_BOOT
649 //for OAM loop back test
650 dump_skb(56,(char *)data);
651 //kfree(data); using g_oam_cell
652 return;
653 #endif //IKOS_MINI_BOOT
654 #ifdef TPE_LOOPBACK
655 amz_push_oam(data);
656 return;
657 #endif//TPE_LOOPBACK
658 int ret = 0;
659 ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status);
660 if (ret == 0)
661 return;
662 }else{
663 //should be normal AAL0 cells
664 // Get VCC
665 vcc = g_atm_dev.queues[qid].vcc;
666 if (vcc != NULL) {
667 AMAZON_TPE_DMSG("push to upper layer\n");
668 skb = dev_alloc_skb(AMAZON_AAL0_SDU);
669 if (skb != NULL) {
670 //skb->dev=vcc->dev;
671 memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU);
672 skb->stamp = xtime;
673 ATM_SKB(skb)->vcc = vcc;
674 (*g_atm_dev.queues[qid].push)(vcc,skb,0);
675 }else{
676 AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n");
677 //inform the upper layer
678 (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM);
679 atomic_inc(&vcc->stats->rx_drop);
680 }
681 }else{
682 AMAZON_TPE_EMSG("invalid qid %u\n",qid);
683 }
684 }
685 //kfree(data); using g_oam_cell
686 }
687
688 /*
689 * Brief: Interrupt handler for software cell extraction (done)
690 * Parameters: irq - CPPN for this interrupt
691 * data - Device ID for this interrupt
692 * regs - Register file
693 *
694 * Description:
695 * When a software extraction is finished this interrupt is issued.
696 * It reads the cell data and sends it to the ATM stack.
697 */
698 void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs)
699 {
700 u32 * cell = NULL;
701 int i;
702 //ATM_AAL0 SDU + QID
703 AMAZON_TPE_DMSG("SWIE extraction done\n");
704 cell = (u32 *) g_oam_cell;
705 if (cell != NULL){
706 //convert to host byte order from big endian
707 for(i=0;i<ATM_AAL0_SDU;i+=4){
708 cell[i/4]=readl(SWIE_ECELL_ADDR+i);
709 }
710 cell[ATM_AAL0_SDU/4]= g_atm_dev.swie.sw;
711 ((u8*)cell)[AMAZON_AAL0_SDU] = g_atm_dev.swie.qid;
712 #ifdef IKOS_MINI_BOOT
713 for(i=0;i<ATM_AAL0_SDU;i+=4){
714 AMAZON_TPE_DMSG("[%2x][%2x][%2x][%2x]\n",
715 ((char*)cell)[i],
716 ((char*)cell)[i+1],
717 ((char*)cell)[i+2],
718 ((char*)cell)[i+3]
719 );
720 }
721 AMAZON_TPE_DMSG("qid: %u\n", ((u8*)cell)[AMAZON_AAL0_SDU]);
722 amazon_atm_swex_push((void *) cell);
723 #else //not IKOS_MINI_BOOT
724 swex_complete_task.data = cell;
725 queue_task(&swex_complete_task,&tq_immediate);
726 mark_bh(IMMEDIATE_BH);
727 #endif //not IKOS_MINI_BOOT
728 }else{
729 AMAZON_TPE_EMSG("no memory for receiving AAL0 cell\n");
730 }
731
732 /* release the lock and check */
733 if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
734 AMAZON_TPE_EMSG("swie lock is already released\n");
735 }
736 wake_up(&g_atm_dev.swie.sleep);
737 }
738 /* Brief: Interrupt handler for software cell insertion
739 *
740 * Parameters: irq - CPPN for this interrupt
741 * data - Device ID for this interrupt
742 * regs - Register file
743 *
744 * Description:
745 * When a software insertion is finished this interrupt is issued.
746 * The only purpose is to release the semaphore and read the status register.
747 */
748 void amazon_atm_swin_isr(int irq, void *data, struct pt_regs *regs)
749 {
750 AMAZON_TPE_DMSG("SWIE insertion done\n");
751 /* release the lock and check */
752 if (test_and_clear_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0){
753 AMAZON_TPE_EMSG("swie lock is already released");
754 }
755 // Release semaphore
756 up(&g_atm_dev.swie.in_sem);
757
758 }
759 /* Brief: Interrupt handler for software cell insertion & extraction
760 * Parameters: irq - CPPN for this interrupt
761 * data - Device ID for this interrupt
762 * regs - Register file
763 * Description:
764 * When a software insertion or extractionis finished this interrupt is issued.
765 */
766 void amazon_atm_swie_isr(int irq, void *data, struct pt_regs *regs)
767 {
768 u32 status=0;
769 // Read status register
770 status = readl(SWIE_ISTAT_ADDR);
771 AMAZON_TPE_DMSG("insertion status: %8x\n", status);
772 if (status & SWIE_ISTAT_DONE){
773 //clear interrupt in peripheral and ICU
774 AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
775 mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
776
777 amazon_atm_swin_isr(irq,data,regs);
778 }
779 status = readl(SWIE_ESTAT_ADDR);
780 AMAZON_TPE_DMSG("extraction status: %8x\n", status);
781 if (status & SWIE_ESTAT_DONE){
782 //clear interrupt
783 AMAZON_WRITE_REGISTER_L(SRC_TOS_MIPS | SRC_CLRR|SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
784 mask_and_ack_amazon_irq(AMAZON_SWIE_INT);
785
786 amazon_atm_swex_isr(irq,data,regs);
787 }
788 //clear interrupt in ICU
789 }
790
791 /*
792 * Brief: Insert ATM cell into CBM
793 * Parameters: queue - Target queue
794 * cell - Pointer to cell data
795 * Return Value: EBUSY - CBM is busy
796 * 0 - OK, cell inserted
797 * Description:
798 * This function inserts a cell into the CBM using the software insertion
799 * method. The format of the cell should be
800 * Little Endian (address starting from 0)
801 * H3, H2, H1, H0, P3, P2, P1, P0, P7, P6, P5, P4, ..., P47, P46, P45, P44
802 * Big Endian (address starting from 0)
803 * H0, H1, H2, H3, P0, P1, P2, P3, P4, P5, P6, P7, ..., P44, P45, P46, P47
804 * This function does not free memory!!!
805 */
806 int amazon_atm_swin(u8 queue, void* cell)
807 {
808 u32 status=0;
809 int i;
810 // Read status register
811 status = readl(SWIE_ISTAT_ADDR);
812 AMAZON_TPE_DMSG(" SWIE status=0x%08x\n",status);
813
814 AMAZON_TPE_DMSG(" Inserting cell qid=%u\n",queue);
815
816 #ifdef AMAZON_CHECK_LINK
817 if (adsl_link_status == 0){
818 return -EFAULT;
819 }
820 #endif //AMAZON_CHECK_LINK
821
822 // Get semaphore (if possible)
823 if (down_interruptible(&g_atm_dev.swie.in_sem)) {
824 return -ERESTARTSYS;
825 }
826 /* try to set lock */
827 wait_event_interruptible(g_atm_dev.swie.sleep,(test_and_set_bit(SWIE_LOCK,&(g_atm_dev.swie.lock)) == 0));
828 if (signal_pending(current)){
829 return -ERESTARTSYS;
830 }
831
832 // Store cell in CBM memory
833 for(i=0;i<ATM_AAL0_SDU;i+=4){
834 AMAZON_WRITE_REGISTER_L(((u32*)cell)[i/4],SWIE_ICELL_ADDR+i);
835 }
836 //Store queue id
837 AMAZON_WRITE_REGISTER_L((u32) queue,SWIE_IQID_ADDR);
838
839 //Start SWIE
840 AMAZON_WRITE_REGISTER_L(SWIE_ICMD_START,SWIE_ICMD_ADDR);
841
842 return 0;
843 }
844
845 #ifdef AMAZON_ATM_DEBUG
846 /*
847 * Brief: Interrupt handler for HTU
848 *
849 * Parameters: irq - CPPN for this interrupt
850 * data - Device ID for this interrupt
851 * regs - Register file
852 *
853 */
854 void amazon_atm_htu_isr(int irq, void *data, struct pt_regs *regs)
855 {
856 u32 irq_stat=0;
857
858 // Read interrupt status register
859 irq_stat = readl(HTU_ISR0_ADDR);
860 AMAZON_TPE_DMSG("HTU status: %8x\n",irq_stat);
861 //Clear interrupt in CBM and ICU
862 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_HTU_INT, HTU_SRC0_ADDR);
863 mask_and_ack_amazon_irq(AMAZON_HTU_INT);
864 // Check if Any Cell Arrived
865 if (irq_stat & (HTU_ISR_NE | HTU_ISR_PNE) ) {
866 AMAZON_TPE_EMSG("INFNOENTRY %8x\n", readl(HTU_INFNOENTRY_ADDR));
867 }else if (irq_stat & (HTU_ISR_TORD|HTU_ISR_PT)){
868 AMAZON_TPE_EMSG("Time Out %8x\n", readl(HTU_INFTIMEOUT_ADDR));
869 }else if (irq_stat & HTU_ISR_IT){
870 AMAZON_TPE_EMSG("Interrupt Test\n");
871 }else if (irq_stat & HTU_ISR_OTOC){
872 AMAZON_TPE_EMSG("Overflow of Time Out Counter\n");
873 }else if (irq_stat & HTU_ISR_ONEC){
874 AMAZON_TPE_EMSG("Overflow of No Entry Counter\n");
875 }else{
876 AMAZON_TPE_EMSG("unknown HTU interrupt occurs %8x\n", irq_stat);
877 }
878
879 }
880 #endif //AMAZON_ATM_DEBUG
881
882 #ifdef AMAZON_TPE_TEST_AAL5_INT
883 /*
884 * Brief: Interrupt handler for AAL5
885 *
886 * Parameters: irq - CPPN for this interrupt
887 * data - Device ID for this interrupt
888 * regs - Register file
889 *
890 */
891 void amazon_atm_aal5_isr(int irq, void *data, struct pt_regs *regs)
892 {
893 volatile u32 irq_stat=0;
894
895 // Read interrupt status register
896 irq_stat = readl(AAL5_SISR0_ADDR);
897 if (irq_stat){
898 AMAZON_TPE_EMSG("A5S status: %8x\n",irq_stat);
899 //Clear interrupt in CBM and ICU
900 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_SSRC0_ADDR);
901 mask_and_ack_amazon_irq(AMAZON_AAL5_INT);
902 }
903 irq_stat = readl(AAL5_RISR0_ADDR);
904 if (irq_stat){
905 AMAZON_TPE_EMSG("A5R status: %8x\n",irq_stat);
906 //Clear interrupt in CBM and ICU
907 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT, AAL5_RSRC0_ADDR);
908 mask_and_ack_amazon_irq(AMAZON_AAL5_INT);
909 }
910 }
911 #endif //AMAZON_TPE_TEST_AAL5_INT
912
913 /*
914 * Brief: Interrupt handler for CBM
915 *
916 * Parameters: irq - CPPN for this interrupt
917 * data - Device ID for this interrupt
918 * regs - Register file
919 *
920 * Description:
921 * This is the MIPS interrupt handler for the CBM. It processes incoming cells
922 * for SWIE queues.
923 */
924 void amazon_atm_cbm_isr(int irq, void *data, struct pt_regs *regs)
925 {
926 u32 irq_stat=0;
927 u8 qid=0;
928
929 // Read interrupt status register
930 while ( (irq_stat = readl(CBM_INTINF0_ADDR))){
931 AMAZON_TPE_DMSG("CBM INT status: %8x\n",irq_stat);
932 //Clear interrupt in CBM and ICU
933 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
934 qid = (u8) ((irq_stat & CBM_INTINF0_QID_MASK)>>CBM_INTINF0_QID_SHIFT);
935 #ifdef AMAZON_TPE_SCR
936 if (irq_stat & CBM_INTINF0_EF){
937 amazon_atm_a5r((void*)qid);
938 }
939 #endif
940 // Check if Any Cell Arrived
941 if (irq_stat & CBM_INTINF0_ACA) {
942 amazon_atm_swex((void *)irq_stat);
943 }
944 //TX AAL5 PDU discard
945 if (irq_stat & CBM_INTINF0_OPF){
946 if ( (qid) < CBM_RX_OFFSET ){
947 g_atm_dev.mib_counter.tx_drop++;
948 }
949 queue_statics(qid, QS_HW_DROP);
950 }
951 if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){
952 AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat);
953 if (irq_stat & CBM_INTINF0_ERR){
954 AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n");
955 }
956 if (irq_stat & CBM_INTINF0_Q0E){
957 AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
958 }
959 if (irq_stat & CBM_INTINF0_Q0I){
960 AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n");
961 }
962 if (irq_stat & CBM_INTINF0_RDE){
963 AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid);
964 dump_qd(qid);
965 }
966 }
967 }
968 mask_and_ack_amazon_irq(AMAZON_CBM_INT);
969 }
970
971 /* Brief: check the status word after AAL SDU after reassembly
972 */
973 static inline void check_aal5_error(u8 stw0, u8 stw1, int qid)
974 {
975 if (stw0 & AAL5_STW0_MFL){
976 AMAZON_TPE_DMSG("Maximum Frame Length\n");
977 g_atm_dev.queues[qid].aal5VccOverSizedSDUs++;
978 }
979 if (stw0 & AAL5_STW0_CRC){
980 AMAZON_TPE_DMSG("CRC\n");
981 g_atm_dev.queues[qid].aal5VccCrcErrors++;
982 }
983 #ifdef AMAZON_ATM_DEBUG_RX
984 AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1);
985 #endif
986 }
987
988 /* Brief: Process DMA rx data
989 * Parameters:
990 dma_dev: pointer to the dma_device_info, provided by us when register the dma device
991 * Return: no
992 * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction.
993 *
994 */
995 //507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev)
996 void __system atm_process_dma_rx(struct dma_device_info* dma_dev)
997 {
998 u8 * head=NULL;
999 u32 length=0;
1000 u8 stw0=0;
1001 u8 stw1=0;
1002
1003 struct sk_buff * skb=NULL;
1004 struct atm_vcc * vcc=NULL;
1005 int qid=0;
1006 #ifdef AMAZON_ATM_DEBUG_RX
1007 static int dma_rx_dump=0;
1008 static u32 seq=0;
1009
1010 seq++;
1011 if (dma_rx_dump>0){
1012 printk("\n=========================[%u]=========================\n",seq);
1013 }
1014 #endif
1015 length=dma_device_read(dma_dev,&head,(void**)&skb);
1016 AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length);
1017 if (head == NULL||length<=0) {
1018 AMAZON_TPE_DMSG("dma_read null \n");
1019 goto error_exit;
1020 }
1021
1022 if (length > (g_atm_dev.aal5.rx_max_sdu+64)){
1023 AMAZON_TPE_EMSG("received packet too large (%u)\n",length);
1024 goto error_exit;
1025 }
1026 //check AAL5R trail for error and qid
1027 //last byte is qid
1028 length--;
1029 qid = (int) head[length];
1030 AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid);
1031 //STW0 is always 4 bytes before qid
1032 length -= 4;
1033 stw0 = head[length]&0xff;
1034 AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0);
1035 //position of STW1 depends on the BE bits
1036 length = length-4 + (stw0&AAL5_STW0_BE);
1037 stw1 = head[length]&0xff;
1038 AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1);
1039 if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){
1040 //AAL5 Error
1041 check_aal5_error(stw0, stw1,qid);
1042 goto error_exit;
1043 }
1044 //make data pointers consistent
1045 //UU + CPI
1046 length -= 2;
1047 AMAZON_TPE_DMSG("packet length %u\n", length);
1048
1049 //error: cannot restore the qid
1050 if (valid_qid(qid) != 1){
1051 AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid);
1052 goto error_exit;
1053 }
1054 vcc = g_atm_dev.queues[qid].vcc;
1055 if (vcc == NULL){
1056 AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid);
1057 goto error_exit;
1058 }
1059 if (skb == NULL){
1060 AMAZON_TPE_EMSG("cannot restore skb pointer!\n");
1061 goto error_exit;
1062 }
1063 skb_put(skb,length);
1064 skb->stamp = xtime;
1065 g_atm_dev.queues[qid].access_time=xtime;
1066 if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){
1067 g_atm_dev.mib_counter.rx_drop++;
1068 queue_statics(qid, QS_SW_DROP);
1069 }else{
1070 g_atm_dev.mib_counter.rx++;
1071 adsl_led_flash();//joelin adsl led
1072 queue_statics(qid, QS_PKT);
1073 AMAZON_TPE_DMSG("push successful!\n");
1074 }
1075 #ifdef AMAZON_ATM_DEBUG_RX
1076 if (dma_rx_dump>0){
1077 printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length);
1078 dump_skb(length+7, head);
1079 }
1080 if (dma_rx_dump >0) dma_rx_dump--;
1081 #endif
1082 return ;
1083 error_exit:
1084 #ifdef AMAZON_ATM_DEBUG_RX
1085 if ( (head!=NULL) && (length >0)){
1086 AMAZON_TPE_EMSG("length=%u\n",length);
1087 dump_skb(length+5, head);
1088 }
1089 dma_rx_dump++;
1090 #endif
1091 g_atm_dev.mib_counter.rx_err++;
1092 queue_statics(qid, QS_ERR);
1093 /*
1094 if (vcc){
1095 (*g_atm_dev.queues[qid].push)(vcc,skb,1);
1096 }
1097 */
1098 if (skb != NULL) {
1099 dev_kfree_skb_any(skb);
1100 }
1101 return;
1102 }
1103
1104 /*Brief: ISR for DMA pseudo interrupt
1105 *Parameter:
1106 dma_dev: pointer to the dma_device_info, provided by us when register the dma device
1107 intr_status:
1108 RCV_INT: rx data available
1109 TX_BUF_FULL_INT: tx descriptor run out of
1110 TRANSMIT_CPT_INT: tx descriptor available again
1111 *Return:
1112 0 for success???
1113 */
1114 //507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
1115 int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status)
1116 {
1117 AMAZON_TPE_DMSG("status:%u\n",intr_status);
1118 switch (intr_status) {
1119 case RCV_INT:
1120 atm_process_dma_rx(dma_dev);
1121 break;
1122 case TX_BUF_FULL_INT:
1123 //TX full: no descriptors
1124 atm_dma_full();
1125 break;
1126 case TRANSMIT_CPT_INT:
1127 //TX free: at least one descriptor
1128 atm_dma_free();
1129 break;
1130 default:
1131 AMAZON_TPE_EMSG("unknown status!\n");
1132 }
1133 return 0;
1134 }
1135
1136 /*Brief: free buffer for DMA tx
1137 *Parameter:
1138 dataptr: pointers to data buffer
1139 opt: optional parameter, used to convey struct skb pointer, passwd in dma_device_write
1140 *Return:
1141 0 for success???
1142 *Description:
1143 called by DMA module to release data buffer after DMA tx transaction
1144 *Error:
1145 cannot restore skb pointer
1146 */
1147 int amazon_atm_free_tx(u8*dataptr, void* opt)
1148 {
1149 struct sk_buff *skb;
1150 if (opt){
1151 AMAZON_TPE_DMSG("free skb%8p\n",opt);
1152 skb = (struct sk_buff *)opt;
1153 amazon_atm_free_tx_skb(skb);
1154 }else{
1155 AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n");
1156 }
1157 return 0;
1158 }
1159
1160 /*Brief: allocate buffer & do alignment
1161 */
1162 inline struct sk_buff * amazon_atm_alloc_buffer(int len)
1163 {
1164 struct sk_buff *skb;
1165 skb = dev_alloc_skb(len+16);
1166 if (skb){
1167 //alignment requriements (4x32 bits (16 bytes) boundary)
1168 alloc_align_16(skb);
1169 }
1170 return skb;
1171 }
1172
1173 /*Brief: allocate buffer for DMA rx
1174 *Parameter:
1175 len: length
1176 opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler,
1177 *Return:
1178 pointer to buffer, NULL means error?
1179 *Description:
1180 must make sure byte alignment
1181 */
1182
1183 u8* amazon_atm_alloc_rx(int len, int* offset, void **opt)
1184 {
1185 struct sk_buff *skb;
1186 *offset = 0;
1187 skb = amazon_atm_alloc_buffer(len);
1188 if (skb){
1189 AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len);
1190 *(struct sk_buff**)opt = skb;
1191 }else{
1192 AMAZON_TPE_DMSG("no memory for receiving atm frame!\n");
1193 return NULL;
1194 }
1195 return skb->data;
1196 }
1197
1198
1199
1200
1201 /* Brief: Allocate kernel memory for sending a datagram.
1202 * Parameters
1203 * vcc virtual connection
1204 * size data buffer size
1205 * Return:
1206 * NULL fail
1207 * sk_buff a pointer to a sk_buff
1208 * Description:
1209 * This function can allocate our own additional memory for AAL5S inbound
1210 * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c)
1211 * when we open the device.
1212 * byte alignment is done is DMA driver.
1213 */
1214 struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size)
1215 {
1216 struct sk_buff *skb;
1217
1218 if (!dma_may_send(DMA_TX_CH0)){
1219 AMAZON_TPE_EMSG("no DMA descriptor available!\n");
1220 return NULL;
1221 }
1222 //AAL5 inbound header space + alignment extra buffer
1223 size+=8+AAL5S_INBOUND_HEADER;
1224
1225 if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) {
1226 AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n",
1227 atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf);
1228 return NULL;
1229 }
1230
1231 skb = amazon_atm_alloc_buffer(size);
1232 if (skb == NULL){
1233 AMAZON_TPE_EMSG("no memory\n");
1234 return NULL;
1235 }
1236 AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb);
1237 AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize);
1238 atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse);
1239
1240 //reserve for AAL5 inbound header
1241 skb_reserve(skb,AAL5S_INBOUND_HEADER);
1242 return skb;
1243 }
1244
1245
1246 /* Brief: change per queue QSB setting according to vcc qos parameters
1247 * Paramters:
1248 * vcc: atm_vcc pointer
1249 * qid: CBM queue id (1~15)
1250 * Return:
1251 */
1252 static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid)
1253 {
1254 qsb_qptl_t qptl;
1255 qsb_qvpt_t qvpt;
1256 u32 tmp=0;
1257 unsigned int qsb_clk;
1258
1259 qsb_clk = amazon_get_fpi_hz()>>1;
1260
1261 AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n"
1262 ,qos->txtp.traffic_class
1263 ,qos->txtp.max_pcr
1264 ,qos->txtp.pcr
1265 ,qos->txtp.min_pcr
1266 ,qos->txtp.scr
1267 ,qos->txtp.mbs
1268 ,qos->txtp.cdv
1269 );
1270
1271 // PCR limiter
1272 if (qos->txtp.max_pcr == 0){
1273 qptl.bit.tprs = 0; /* 0 disables the PCR limiter */
1274 }else {
1275 // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr
1276 tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1;
1277 // check if an overfow occured
1278 if (tmp > QSB_TP_TS_MAX) {
1279 AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp);
1280 qptl.bit.tprs = QSB_TP_TS_MAX;
1281 }else{
1282 qptl.bit.tprs = tmp;
1283 }
1284 }
1285 //WFQ
1286 if (qos->txtp.traffic_class == ATM_CBR || qos->txtp.traffic_class ==ATM_VBR_RT){
1287 // real time queue gets weighted fair queueing bypass
1288 qptl.bit.twfq = 0;
1289 }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){
1290 // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates
1291 // wfq factor is maximum cell rate / garenteed cell rate.
1292 //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;
1293 if (qos->txtp.min_pcr == 0) {
1294 AMAZON_TPE_EMSG("<warning> MIN_PCR should not be zero\n");
1295 qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
1296 }else{
1297 tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr;
1298 if (tmp == 0 ){
1299 qptl.bit.twfq = 1;
1300 }else if (tmp > QSB_WFQ_NONUBR_MAX){
1301 AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp);
1302 qptl.bit.twfq = QSB_WFQ_NONUBR_MAX;
1303 }else{
1304 qptl.bit.twfq = tmp;
1305 }
1306 }
1307 }else if (qos->txtp.traffic_class == ATM_UBR){
1308 // ubr bypass, twfq set to maximum value
1309 qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
1310 }else{
1311 //tx is diabled, treated as UBR
1312 AMAZON_TPE_EMSG("<warning> unsupported traffic class %u \n", qos->txtp.traffic_class);
1313 qos->txtp.traffic_class = ATM_UBR;
1314 qptl.bit.twfq = QSB_WFQ_UBR_BYPASS;
1315 }
1316
1317 //SCR Leaky Bucket Shaper VBR.0/VBR.1
1318 if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){
1319 if (qos->txtp.scr == 0){
1320 //SCR == 0 disable the shaper
1321 qvpt.bit.ts = 0;
1322 qvpt.bit.taus = 0;
1323 }else{
1324 //CLP
1325 if (vcc->atm_options&ATM_ATMOPT_CLP){
1326 //CLP1
1327 qptl.bit.vbr = 1;
1328 }else{
1329 //CLP0
1330 qptl.bit.vbr = 0;
1331 }
1332 //TS and TauS
1333 tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1;
1334 if (tmp > QSB_TP_TS_MAX) {
1335 AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp);
1336 qvpt.bit.ts = QSB_TP_TS_MAX;
1337 }else{
1338 qvpt.bit.ts = tmp;
1339 }
1340 tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64;
1341 if (tmp > QSB_TAUS_MAX){
1342 AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp);
1343 qvpt.bit.taus = QSB_TAUS_MAX;
1344 }else if (tmp == 0){
1345 qvpt.bit.taus = 1;
1346 }else{
1347 qvpt.bit.taus = tmp;
1348 }
1349 }
1350 }else{
1351 qvpt.w0 = 0;
1352 }
1353 //write the QSB Queue Parameter Table (QPT)
1354 AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR);
1355 AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR);
1356 AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<<QSB_TABLESEL_SHIFT)
1357 | QSB_RAMAC_REG_LOW
1358 | QSB_WRITE
1359 | qid
1360 ,QSB_RAMAC_ADDR);
1361 //write the QSB Queue VBR Parameter Table (QVPT)
1362 AMAZON_WRITE_REGISTER_L(QSB_QVPT_SET_MASK,QSB_RTM_ADDR);
1363 AMAZON_WRITE_REGISTER_L(qvpt.w0, QSB_RTD_ADDR);
1364 AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QVPT<<QSB_TABLESEL_SHIFT)
1365 | QSB_RAMAC_REG_LOW
1366 | QSB_WRITE
1367 | qid
1368 ,QSB_RAMAC_ADDR);
1369 AMAZON_TPE_EMSG("tprs:%u twfq:%u ts:%u taus:%u\n",qptl.bit.tprs,qptl.bit.twfq,qvpt.bit.ts,qvpt.bit.taus);
1370 }
1371
1372 /*
1373 * Brief: create/change CBM queue descriptor
1374 * Parameter:
1375 * vcc: atm_vcc pointer
1376 * qid: CBM queue id (1~15)
1377 */
1378 static inline void set_qd(struct atm_vcc *vcc, u32 qid)
1379 {
1380 u32 tx_config=0,rx_config=0;
1381 u32 itf = (u32) vcc->itf;
1382 u32 dma_qos=0;
1383 u8 * qd_addr=NULL;
1384
1385 tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt;
1386 //RT: check if the connection is a real time connection
1387 if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){
1388 tx_config|= CBM_QD_W3_RT;
1389 }else{
1390 tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service
1391 }
1392 rx_config = tx_config;
1393
1394 if(vcc->qos.aal == ATM_AAL5){
1395 //QoS: DMA QoS according to the traffic class
1396 switch (vcc->qos.txtp.traffic_class){
1397 case ATM_CBR: dma_qos = CBR_DMA_QOS;break;
1398 case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break;
1399 case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break;
1400 case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break;
1401 case ATM_UBR: dma_qos = UBR_DMA_QOS;break;
1402 }
1403
1404 //TX: upstream, AAL5(EPD or PPD), NOINT, SBid
1405 tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
1406 //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR
1407 #ifdef AMAZON_TPE_SCR
1408 rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF;
1409 #else
1410 rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR;
1411 #endif
1412 }else {
1413 //should be AAL0
1414 //upstream, NOINT, SBid
1415 tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK);
1416 //RX: downstream, ACA interrupt,
1417 rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA;
1418 }
1419
1420 //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells
1421 tx_config |= ( (divide_by_64_round_up(tx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
1422 rx_config |= ( (divide_by_64_round_up(rx_q_threshold)&0xffff)<<CBM_QD_W3_THRESHOLD_SHIFT) & CBM_QD_W3_THRESHOLD_MASK;
1423
1424 qd_addr = (u8*) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
1425 //TX
1426 AMAZON_WRITE_REGISTER_L(tx_config, (qd_addr+qid*CBM_QD_SIZE + 0xc));
1427 AMAZON_WRITE_REGISTER_L(0, (qd_addr+qid*CBM_QD_SIZE + 0x8));
1428 //RX
1429 AMAZON_WRITE_REGISTER_L(rx_config, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0xc));
1430 AMAZON_WRITE_REGISTER_L(0, (qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE + 0x8));
1431 }
1432 /*
1433 * Brief: add HTU table entry
1434 * Parameter:
1435 * vpi.vci:
1436 * qid: CBM queue id (DEST is qid + CBM_RX_OFFSET)
1437 * idx: entry id (starting from zero to 14)
1438 * Return:
1439 * 0: sucessful
1440 * EIO: HTU table entry cannot be written
1441 */
1442
1443 inline int set_htu_entry(u8 vpi, u16 vci, u8 qid, u8 idx)
1444 {
1445 int i = 0;
1446 u32 tmp1=0;
1447 while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < 1024) i++;
1448 if (i > 1024)
1449 {
1450 AMAZON_TPE_EMSG("timeout\n");
1451 return -EIO;
1452 }
1453 // write address register,
1454 AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR);
1455 // configure transmit queue
1456 tmp1 = vpi<<24|vci<<8;
1457 tmp1|= HTU_RAMDAT1_VCON // valid connection the entry is not validated here !!!!!!!!!!!!!!!!
1458 |HTU_RAMDAT1_VCI3 // vci3 -> oam queue
1459 |HTU_RAMDAT1_VCI4 // vci4 -> oam queue
1460 |HTU_RAMDAT1_VCI6 // vci6 -> rm queue
1461 |HTU_RAMDAT1_PTI4 // pti4 -> oam queue
1462 |HTU_RAMDAT1_PTI5; // pti5 -> oam queue
1463
1464 // ramdat 1 (in params & oam handling)
1465 AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR);
1466 // ramdat 2 (out params & oam handling)
1467 tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK)
1468 |HTU_RAMDAT2_PTI6
1469 |HTU_RAMDAT2_PTI7
1470 |HTU_RAMDAT2_F4U
1471 |HTU_RAMDAT2_F5U
1472 ;
1473 AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR);
1474 wmb();
1475 // write HTU entry
1476 AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR);
1477 return 0;
1478 }
1479 /*
1480 * Brief: add HTU table entry
1481 * Parameter:
1482 * vcc: atm_vcc pointer
1483 * qid: CBM queue id
1484 * Return:
1485 * 0: sucessful
1486 * EIO: HTU table entry cannot be written
1487 */
1488 inline static int set_htu(struct atm_vcc *vcc, u32 qid)
1489 {
1490 return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET));
1491 }
1492
1493 /*
1494 * Brief: allocate a queue
1495 * Return:
1496 * <=0 no available queues
1497 * >0 qid
1498 */
1499 static int atm_allocate_q(short itf)
1500 {
1501 int i;
1502 u32 tmp1=0;
1503 int qid=0;
1504 amazon_atm_port_t * dev;
1505 dev = &g_atm_dev.ports[itf];
1506 //find start queue id for this interface
1507 for (i=0; i< itf; i++)
1508 {
1509 qid+= g_atm_dev.ports[i].max_conn;
1510 }
1511 // apply default queue offset ( oam, free cell queue, others, rm )
1512 qid += CBM_DEFAULT_Q_OFFSET;
1513 tmp1 = qid;
1514 // search for a free queue
1515 while ( (qid<tmp1+dev->max_conn)
1516 && ( g_atm_dev.queues[qid].free != 1)) {
1517 qid++;;
1518 }
1519 // if none was found, send failure message and return
1520 if ( tmp1+dev->max_conn == qid)
1521 {
1522 return -EFAULT;
1523 }
1524 return qid;
1525
1526 }
1527 /* Brief: open a aal5 or aal0 connection
1528 */
1529 static int atm_open(struct atm_vcc *vcc, push_back_t push)
1530 {
1531 int err=0;
1532 int qid=0;
1533 amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf];
1534 unsigned long flags;
1535 /***************** check bandwidth ******************/
1536 /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */
1537 if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
1538 ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr)
1539 ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr)
1540 ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr)
1541 ) {
1542 AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr);
1543 return -EINVAL;
1544 }
1545 if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){
1546 AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid);
1547 return -EADDRINUSE;
1548 }
1549
1550 /***************** allocate entry queueID for this port *****************/
1551 if ( (qid=atm_allocate_q(vcc->itf)) <= 0){
1552 AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid);
1553 AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf);
1554 return -EINVAL;
1555 }
1556 /**************QSB parameters and CBM descriptors*************/
1557 set_qsb(vcc, &vcc->qos, qid);
1558 set_qd(vcc, qid);
1559 mb();
1560 err=set_htu(vcc,qid);
1561 if (err){
1562 AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
1563 return err;
1564 }
1565 /************set internal mapping*************/
1566 local_irq_save(flags);
1567 g_atm_dev.queues[qid].free = 0;
1568 g_atm_dev.queues[qid].vcc = vcc;
1569 g_atm_dev.queues[qid].push = push;
1570 g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0;
1571 g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc;
1572 g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push;
1573 /******************reserve bandwidth**********************/
1574 if (vcc->qos.txtp.traffic_class == ATM_CBR){
1575 //CBR, real time connection, reserve PCR
1576 port->tx_cur_cr += vcc->qos.txtp.max_pcr;
1577 port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
1578 }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
1579 //VBR_RT, real time connection, reserve PCR
1580 port->tx_cur_cr += vcc->qos.txtp.max_pcr;
1581 port->tx_rem_cr -= vcc->qos.txtp.max_pcr;
1582 }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
1583 //VBR_NRT, reserve SCR
1584 port->tx_cur_cr += vcc->qos.txtp.pcr;
1585 port->tx_rem_cr -= vcc->qos.txtp.pcr;
1586 }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
1587 //UBR_PLUS, reserve MCR
1588 port->tx_cur_cr += vcc->qos.txtp.min_pcr;
1589 port->tx_rem_cr -= vcc->qos.txtp.min_pcr;
1590 }
1591 local_irq_restore(flags);
1592 return err;
1593 }
1594 /* Brief: Open ATM connection
1595 * Parameters: atm_vcc - Pointer to VCC data structure
1596 * vpi - VPI value for new connection
1597 * vci - VCI value for new connection
1598 *
1599 * Return: 0 - sucessful
1600 * -ENOMEM - No memory available
1601 * -EINVAL - No bandwidth/queue/ or unsupported AAL type
1602 * Description:
1603 * This function opens an ATM connection on a specific device/interface
1604 *
1605 */
1606 int amazon_atm_open(struct atm_vcc *vcc,push_back_t push)
1607 {
1608 int err=0;
1609
1610 AMAZON_TPE_DMSG("vpi %u vci %u itf %u aal %u\n"
1611 ,vcc->vpi
1612 ,vcc->vci
1613 ,vcc->itf
1614 ,vcc->qos.aal
1615 );
1616
1617 AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n"
1618 ,vcc->qos.txtp.traffic_class
1619 ,vcc->qos.txtp.max_pcr
1620 ,vcc->qos.txtp.max_sdu
1621 );
1622 AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n"
1623 ,vcc->qos.rxtp.traffic_class
1624 ,vcc->qos.rxtp.max_pcr
1625 ,vcc->qos.rxtp.max_sdu
1626 );
1627 if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){
1628 err = atm_open(vcc,push);
1629 }else{
1630 AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal);
1631 err = -EPROTONOSUPPORT;
1632 };
1633 if (err == 0 ){
1634 //replace the default memory allocation function with our own
1635 vcc->alloc_tx = amazon_atm_alloc_tx;
1636 set_bit(ATM_VF_READY,&vcc->flags);
1637 }
1638 return err;
1639 }
1640
1641 /* Brief: Send ATM OAM cell
1642 * Parameters: atm_vcc - Pointer to VCC data structure
1643 * skb - Pointer to sk_buff structure, that contains the data
1644 * Return: 0 - sucessful
1645 * -ENOMEM - No memory available
1646 * -EINVAL - Not supported
1647 * Description:
1648 * This function sends a cell over and ATM connection
1649 * We always release the skb
1650 * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE)
1651 */
1652 int amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags)
1653 {
1654 int err=0;
1655 int qid=0;
1656 struct amazon_atm_cell_header * cell_header;
1657 // Get cell header
1658 cell_header = (struct amazon_atm_cell_header*) cell;
1659 if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) {
1660 qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci);
1661 }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) {
1662 //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi);
1663 // 507281:tc.chen start
1664 u8 f4_vpi;
1665 f4_vpi = cell_header->bit.vpi;
1666 qid = amazon_atm_find_vpi(f4_vpi );
1667 // 507281:tc.chen end
1668 }else{
1669 //non-OAM cells, always invalid
1670 qid = -EINVAL;
1671 }
1672 if (qid == -EINVAL) {
1673 err = -EINVAL;
1674 AMAZON_TPE_EMSG("not valid AAL0 packet\n");
1675 }else{
1676 //send the cell using swie
1677 #ifdef TPE_LOOPBACK
1678 err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell);
1679 #else
1680 err = amazon_atm_swin(qid, cell);
1681 #endif
1682 }
1683 //kfree(cell);
1684 return err;
1685 }
1686
1687 /* Brief: Send AAL5 frame through DMA
1688 * Parameters: vpi - virtual path id
1689 * vci - virtual circuit id
1690 * clp - cell loss priority
1691 * qid - CBM queue to be sent to
1692 * skb - packet to be sent
1693 * Return: 0 - sucessful
1694 * -ENOMEM - No memory available
1695 * -EINVAL - Not supported
1696 * Description:
1697 * This function sends a AAL5 frame over and ATM connection
1698 * 1. make sure that the data is aligned to 4x32-bit boundary
1699 * 2. provide the inbound data (CPCS-UU and CPI, not used here)
1700 * 3. set CLPn
1701 * 4. send the frame by DMA
1702 * 5. release the buffer ???
1703 ** use our own allocation alloc_tx
1704 ** we make sure the alignment and additional memory
1705 *** we always release the skb
1706
1707 */
1708 int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb)
1709 {
1710 int err=0,need_pop=1;
1711 u32 * data=NULL;
1712 int nwrite=0;
1713 struct sk_buff *skb_tmp;
1714 u32 len=skb->len;
1715
1716 //AAL5S inbound header 8 bytes
1717 if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) {
1718 AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu);
1719 AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len);
1720 err = -EMSGSIZE;
1721 goto atm_dma_tx_error_exit;
1722 }
1723
1724 //Check the byte alignment requirement and header space
1725 if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)<AAL5S_INBOUND_HEADER)){
1726 //not aligned or no space for header, fall back to memcpy
1727 skb_tmp = dev_alloc_skb(skb->len+16);
1728 if (skb_tmp==NULL){
1729 err = - ENOMEM;
1730 goto atm_dma_tx_error_exit;
1731 }
1732 alloc_align_16(skb_tmp);
1733 g_atm_dev.aal5.cnt_cpy++;
1734 skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER);
1735 memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len);
1736 amazon_atm_free_tx_skb(skb);
1737 need_pop=0;
1738 skb = skb_tmp;
1739 }
1740 //Provide AAL5S inbound header
1741 data = (u32 *)skb_push(skb,8);
1742 data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp);
1743 data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid);
1744
1745 len = skb->len;
1746
1747 //send through DMA
1748 AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]);
1749 AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]);
1750 AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len);
1751 nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb);
1752 if (nwrite != len) {
1753 //DMA descriptors full
1754 // AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
1755 AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len);
1756 err = -EAGAIN;
1757 goto atm_dma_tx_drop_exit;
1758 }
1759 AMAZON_TPE_DMSG("just finish call dma_write\n");
1760 //release in the "dma done" call-back
1761 return 0;
1762 atm_dma_tx_error_exit:
1763 g_atm_dev.mib_counter.tx_err++;
1764 queue_statics(qid, QS_ERR);
1765 goto atm_dma_tx_exit;
1766
1767 atm_dma_tx_drop_exit:
1768 g_atm_dev.mib_counter.tx_drop++;
1769 queue_statics(qid, QS_SW_DROP);
1770 atm_dma_tx_exit:
1771 if (need_pop){
1772 amazon_atm_free_tx_skb(skb);
1773 }else{
1774 dev_kfree_skb_any(skb);
1775 }
1776 return err;
1777 }
1778
1779 /* Brief: Send AAL0/AAL5 packet
1780 * Parameters: atm_vcc - Pointer to VCC data structure
1781 * skb - Pointer to sk_buff structure, that contains the data
1782 * Return: 0 - sucessful
1783 * -ENOMEM - No memory available
1784 * -EINVAL - Not supported
1785 * Description:
1786 * See amazon_atm_dma_tx
1787 */
1788 int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb)
1789 {
1790 int qid=0;
1791 u8 clp=0;
1792 int err=0;
1793 u32 wm=0;
1794
1795 if (vcc == NULL || skb == NULL){
1796 AMAZON_TPE_EMSG("invalid parameter\n");
1797 return -EINVAL;
1798 }
1799 ATM_SKB(skb)->vcc = vcc;
1800 qid = amazon_atm_get_queue(vcc);
1801 if (valid_qid(qid) != 1) {
1802 AMAZON_TPE_EMSG("invalid vcc!\n");
1803 err = -EINVAL;
1804 goto atm_send_err_exit;
1805 }
1806
1807 //Send AAL0 using SWIN
1808 if (vcc->qos.aal == ATM_AAL0){
1809 #ifdef TPE_LOOPBACK
1810 err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data);
1811 #else
1812 err=amazon_atm_swin(qid, skb->data);
1813 #endif
1814 if (err){
1815 goto atm_send_err_exit;
1816 }
1817 goto atm_send_exit;
1818 }
1819
1820 //Should be AAl5
1821 //MIB counter
1822 g_atm_dev.mib_counter.tx++;
1823 adsl_led_flash();//joelin adsl led
1824 queue_statics(qid, QS_PKT);
1825
1826 #ifdef AMAZON_CHECK_LINK
1827 //check adsl link
1828 if (adsl_link_status == 0){
1829 //link down
1830 AMAZON_TPE_DMSG("ADSL link down, discarded!\n");
1831 err=-EFAULT;
1832 goto atm_send_drop_exit;
1833 }
1834 #endif
1835 clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0;
1836 //check watermark first
1837 wm = readl(CBM_WMSTAT0_ADDR);
1838 if ( (wm & (1<<qid))
1839 ||( (vcc->qos.txtp.traffic_class != ATM_CBR
1840 &&vcc->qos.txtp.traffic_class != ATM_VBR_RT)
1841 &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){
1842 //wm hit: discard
1843 AMAZON_TPE_DMSG("watermark hit, discarded!\n");
1844 err=-EFAULT;
1845 goto atm_send_drop_exit;
1846 }
1847 #ifdef TPE_LOOPBACK
1848 return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb);
1849 #else
1850 return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb);
1851 #endif
1852
1853 atm_send_exit:
1854 amazon_atm_free_tx_skb_vcc(vcc,skb);
1855 return 0;
1856
1857 atm_send_drop_exit:
1858 g_atm_dev.mib_counter.tx_drop++;
1859 queue_statics(qid,QS_SW_DROP);
1860 atm_send_err_exit:
1861 amazon_atm_free_tx_skb_vcc(vcc,skb);
1862 return err;
1863 }
1864
1865 /* Brief: Return ATM port related MIB
1866 * Parameter: interface number
1867 atm_cell_ifEntry_t
1868 */
1869 int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf)
1870 {
1871 g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP);
1872 to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp;
1873 #ifdef AMAZON_TPE_READ_ARC
1874 u32 reg_val=0;
1875 meiDebugRead((AR_CELL0_ADDR+itf*4),&reg_val,1);
1876 g_atm_dev.mib_counter.rx_cells += reg_val;
1877 reg_val=0;
1878 meiDebugWrite((AR_CELL0_ADDR+itf*4),&reg_val,1);
1879 to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32;
1880 to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
1881
1882 meiDebugRead((AT_CELL0_ADDR+itf*4),&reg_val,1);
1883 g_atm_dev.mib_counter.tx_cells += reg_val;
1884 reg_val=0;
1885 meiDebugWrite((AT_CELL0_ADDR+itf*4),&reg_val,1);
1886 to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32;
1887 to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff;
1888
1889 meiDebugRead((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
1890 g_atm_dev.mib_counter.rx_err_cells += reg_val;
1891 reg_val=0;
1892 meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),&reg_val,1);
1893 to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells;
1894
1895 to->ifOutErrors = 0;
1896 #else
1897 to->ifHCInOctets_h = 0;
1898 to->ifHCInOctets_l = 0;
1899 to->ifHCOutOctets_h = 0;
1900 to->ifHCOutOctets_l = 0;
1901 to->ifInErrors = 0;
1902 to->ifOutErrors = 0;
1903 #endif
1904 return 0;
1905 }
1906
1907 /* Brief: Return ATM AAL5 related MIB
1908 * Parameter:
1909 atm_aal5_ifEntry_t
1910 */
1911 int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to)
1912 {
1913 u32 reg_l,reg_h;
1914 //AAL5R received Octets from ATM
1915 reg_l = readl(AAL5_RIOL_ADDR);
1916 reg_h = readl(AAL5_RIOM_ADDR);
1917 g_atm_dev.mib_counter.rx_cnt_h +=reg_h;
1918 if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){
1919 g_atm_dev.mib_counter.rx_cnt_h++;
1920 }
1921
1922 g_atm_dev.mib_counter.rx_cnt_l+= reg_l;
1923 //AAL5S sent Octets to ATM
1924 reg_l = readl(AAL5_SOOL_ADDR);
1925 reg_h = readl(AAL5_SOOM_ADDR);
1926 g_atm_dev.mib_counter.tx_cnt_h +=reg_h;
1927 if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){
1928 g_atm_dev.mib_counter.tx_cnt_h++;
1929 }
1930 g_atm_dev.mib_counter.tx_cnt_l+= reg_l;
1931
1932
1933 g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR);
1934 g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR);
1935
1936 //store
1937 to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h;
1938 to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l;
1939 to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h;
1940 to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l;
1941 to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop;
1942 to->ifInDiscards = g_atm_dev.mib_counter.rx_drop;
1943
1944 //Software provided counters
1945 //packets passed to higher layer
1946 to->ifInUcastPkts = g_atm_dev.mib_counter.rx;
1947 //packets passed from higher layer
1948 to->ifOutUcastPkts = g_atm_dev.mib_counter.tx;
1949 //number of wrong downstream packets
1950 to->ifInErrors = g_atm_dev.mib_counter.rx_err;
1951 //number of wrong upstream packets
1952 to->ifOutErros = g_atm_dev.mib_counter.tx_err;
1953
1954 return 0;
1955 }
1956 /* Brief: Return ATM AAL5 VCC related MIB from internale use
1957 * Parameter:
1958 * qid
1959 * atm_aal5_vcc_t
1960 */
1961 static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to)
1962 {
1963 //aal5VccCrcErrors
1964 to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors;
1965 to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs;
1966 to->aal5VccSarTimeOuts = 0; //not supported yet
1967 return 0;
1968 }
1969 /* Brief: Return ATM AAL5 VCC related MIB from vpi/vci
1970 * Parameter: atm_vcc
1971 * atm_aal5_vcc_t
1972 */
1973 int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to)
1974 {
1975 int qid=0;
1976 int err=0;
1977 qid = amazon_atm_find_vpivci(vpi, vci);
1978 if (qid >0 ){
1979 err = __amazon_atm_vcc_mib(qid,to);
1980 }else{
1981 return -EINVAL;
1982 }
1983 return err;
1984 }
1985
1986
1987 /* Brief: Return ATM AAL5 VCC related MIB
1988 * Parameter: atm_vcc
1989 * atm_aal5_vcc_t
1990 */
1991 int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to)
1992 {
1993 int qid=0;
1994 int err=0;
1995 qid = amazon_atm_get_queue(vcc);
1996 if (qid >0 ){
1997 err = __amazon_atm_vcc_mib(qid,to);
1998 }else{
1999 return -EINVAL;
2000 }
2001 return err;
2002 }
2003
2004 /* Brief: Close ATM connection
2005 * Parameters: atm_vcc - Pointer to VCC data structure
2006 * Return: no
2007 * Description:
2008 * This function closes the given ATM connection
2009 */
2010 void amazon_atm_close(struct atm_vcc *vcc){
2011 int i;
2012 int qid=0;
2013 u32 tmp1;
2014 u8 * qd_addr;
2015 unsigned long flags;
2016 if (vcc == NULL){
2017 AMAZON_TPE_EMSG("invalid parameter. vcc is null\n");
2018 return;
2019 }
2020 u32 itf = (u32) vcc->itf;
2021 //release bandwidth
2022 if (vcc->qos.txtp.traffic_class == ATM_CBR){
2023 g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
2024 g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
2025 }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){
2026 g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr;
2027 g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr;
2028 }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){
2029 g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr;
2030 g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr;
2031 }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){
2032 g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr;
2033 g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr;
2034 }
2035
2036 qid = amazon_atm_get_queue(vcc);
2037 if (qid == -EINVAL){
2038 AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci);
2039 return;
2040 }
2041 local_irq_save(flags);
2042 //Disable HTU entry
2043 i=0;
2044 while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++;
2045 if (i == HTU_RAM_ACCESS_MAX){
2046 AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n");
2047 }
2048
2049 // write address register
2050 AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR);
2051 // invalidate the connection
2052 AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR);
2053 // write command
2054 AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR);
2055
2056 qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
2057 #ifdef AMAZON_ATM_DEBUG
2058 tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff;
2059 AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1);
2060 tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff;
2061 AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1);
2062 #endif
2063 // set threshold of txqueue to 0
2064 tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c);
2065 tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
2066 AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c));
2067 // set threshold of rxqueue to 0
2068 tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c);
2069 tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK);
2070 AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c));
2071
2072 //clear internal mapping
2073 amazon_atm_clear_vcc(qid);
2074 amazon_atm_clear_vcc(qid+CBM_RX_OFFSET);
2075
2076 local_irq_restore(flags);
2077 }
2078
2079
2080 /* Brief: initialize internal data structure
2081 */
2082 static void atm_constructor(amazon_atm_dev_t * dev)
2083 {
2084 int i;
2085 memset(dev,0,sizeof(amazon_atm_dev_t));
2086 atm_init_parameters(dev);
2087 //internal: queue "free" flag
2088 for(i=1;i<AMAZON_ATM_MAX_QUEUE_NUM;i++) {
2089 //dev->queues[i].vcc=NULL;
2090 dev->queues[i].free = 1;
2091 }
2092 for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
2093 dev->ports[i].tx_rem_cr = dev->ports[i].tx_max_cr;
2094 }
2095 //MIB
2096 atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors
2097 }
2098
2099 /* Brief: return round up base-2 logarithm
2100 */
2101 static inline int get_log_2(u32 value)
2102 {
2103 int i=0,j=1;
2104 while (i<11){
2105 if (j>=value) break;
2106 j=j<<1;
2107 i++;
2108 }
2109 AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i);
2110 return i;
2111 }
2112
2113 /* Brief: TPE hardware initialization
2114 * Parameter: specifiy the configurations of the hardware
2115 */
2116 static inline int atm_init_hard(amazon_atm_dev_t * dev)
2117 {
2118 int i;
2119 u32 tmp1, tmp2, tmp3;
2120 u8 * mem_addr=NULL;
2121 u8 * qd_addr=NULL;
2122 //PMU power on the module 1st
2123 *(AMAZON_PMU_PWDCR) = (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE);
2124 //Reset the module
2125 *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE);
2126 mb();
2127 mdelay(100);
2128 *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE));
2129 mb();
2130
2131 unsigned long qsb_clk = amazon_get_fpi_hz()>>1;
2132 /*********allocate & arrange memory for CBM *********/
2133 if (dev->cbm.mem_addr == NULL){
2134 dev->cbm.allocated = 1;
2135 mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
2136 if (mem_addr != NULL){
2137 dev->cbm.mem_addr = mem_addr;
2138 } else {
2139 goto init_no_mem;
2140 }
2141 }
2142 if (dev->cbm.qd_addr == NULL){
2143 #ifdef CONFIG_USE_VENUS
2144 //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004
2145 //thus, we allocate 64k memory
2146 qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4);
2147 if (qd_addr != NULL) {
2148 dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr));
2149 dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000);
2150 }else{
2151 goto init_no_mem;
2152 }
2153 #else //CONFIG_USE_VENUS
2154 qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL);
2155 if (qd_addr != NULL) {
2156 dev->cbm.qd_addr = qd_addr;
2157 }else {
2158 goto init_no_mem;
2159 }
2160 #endif //CONFIG_USE_VENUS
2161 }
2162 //#ifndef CONFIG_MIPS_UNCACHED
2163 mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr);
2164 qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr);
2165 //#endif
2166 //CBM reset cell queue memory, 64 bytes / cell
2167 memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt);
2168 //make a link list, last 4 bytes is pointer
2169 for(i=1;i<dev->cbm.free_cell_cnt;i++){
2170 AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c));
2171 }
2172 //reset queue descriptor
2173 memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM);
2174 //init word 0-2 of q0 (free cell list)
2175 //address of last cell
2176 AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr);
2177 //address of first cell
2178 AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4));
2179 //no. of free cells
2180 AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8));
2181 //init q descriptor for OAM receiving
2182 AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
2183 // AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c));
2184 //config CBM
2185 //set offset address and threshold
2186 AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR);
2187 AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR);
2188 AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR);
2189 AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR);
2190 //config interrupts
2191 AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR
2192 #ifdef AMAZON_ATM_DEBUG
2193 |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR
2194 #endif
2195 #ifdef AMAZON_TPE_SCR
2196 |CBM_IMR_EF
2197 #endif
2198 )), CBM_IMR0_ADDR);
2199 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR);
2200
2201 //HTU
2202 //RAM entry for number of possible connections per interface
2203 tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0;
2204 AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR);
2205 for(i=1;i<AMAZON_ATM_PORT_NUM;i++){
2206 tmp1+=dev->ports[i].max_conn;
2207 AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i);
2208 }
2209 dev->cbm.max_q_off = tmp1+1;
2210 //Queue ID for OAM/RM/Other cells
2211 AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR);
2212 AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR);
2213 AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR);
2214 //Timeout
2215 AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR);
2216 #ifdef AMAZON_ATM_DEBUG
2217 AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK
2218 &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR);
2219 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR);
2220 #endif
2221 //QSB
2222 //global setting, TstepC, SBL, Tau
2223 //Tau
2224 AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR);
2225 //SBL
2226 AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR);
2227 //tstep
2228 AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR);
2229
2230 //port settting
2231 for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
2232 if ( (dev->ports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){
2233 tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr;
2234 tmp2 = tmp1 / 64; //integer value of Tsb
2235 tmp3 = tmp1%64 + 1; //fractional part of Tsb
2236 //carry over to integer part (?)
2237 if (tmp3 == 64) {
2238 tmp3 = 0;
2239 tmp2++;
2240 }
2241 if (tmp2 == 0){
2242 tmp2 = 1;
2243 tmp3 = 1;
2244 }
2245 //1. set mask 2. write value to data transfer register 3. start the transfer
2246 //SCT(FracRate)
2247 AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR);
2248 AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR);
2249 AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
2250 //SPT(SBV + PN + IntRage)
2251 AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_MASK, QSB_RTM_ADDR);
2252 AMAZON_WRITE_REGISTER_L(QSB_SPT_SBVALID|tmp2|(i<<16),QSB_RTD_ADDR);
2253 AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)|QSB_RAMAC_REG_LOW|QSB_WRITE|i),QSB_RAMAC_ADDR);
2254
2255
2256 }
2257 }
2258
2259 //SWIE: Setup Service Request Control Registers to enable interrupts
2260 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ISRC_ADDR);
2261 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_SWIE_INT, SWIE_ESRC_ADDR);
2262
2263 wmb();
2264 #ifdef AMAZON_TPE_TEST_AAL5_INT
2265 AMAZON_WRITE_REGISTER_L(AAL5R_ISR_FE,AAL5_RIMR0_ADDR);
2266 AMAZON_WRITE_REGISTER_L(0, AAL5_SIMR0_ADDR);
2267 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_SSRC0_ADDR);
2268 AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_AAL5_INT,AAL5_RSRC0_ADDR);
2269 #endif //AMAZON_TPE_TEST_AAL5_INT
2270
2271 AMAZON_WRITE_REGISTER_L(dev->aal5.tx_max_sdu,AAL5_SMFL_ADDR);
2272 AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR);
2273 AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode
2274 |AAL5_SCMD_SS
2275 |AAL5_SCMD_AR
2276 ,AAL5_SCMD_ADDR);
2277 //start CBM
2278 AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
2279 wmb();
2280 return 0;
2281 init_no_mem:
2282 if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1));
2283
2284 #ifdef CONFIG_USE_VENUS
2285 //to work around a bug, bit15 of QDOFF address should be 1
2286 if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4);
2287 #else //CONFIG_USE_VENUS
2288 if (qd_addr != NULL) kfree(qd_addr);
2289 #endif //CONFIG_USE_VENUS
2290 return -ENOMEM;
2291 }
2292
2293 /*
2294 * Brief: Create entry in /proc for status information
2295 */
2296 void atm_create_proc(void)
2297 {
2298 create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM);
2299 create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB);
2300 create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC);
2301 #if 0
2302 create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5);
2303 create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM);
2304 create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU);
2305 create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB);
2306 create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE);
2307 #endif
2308 }
2309
2310 /*
2311 * Brief: Delete entry in /proc for status information
2312 */
2313 void atm_delete_proc(void)
2314 {
2315 remove_proc_entry("amazon_atm", NULL);
2316 remove_proc_entry("amazon_atm_mib", NULL);
2317 remove_proc_entry("amazon_atm_vcc", NULL);
2318 #if 0
2319 remove_proc_entry("amazon_atm_aal5", NULL);
2320 remove_proc_entry("amazon_atm_cbm", NULL);
2321 remove_proc_entry("amazon_atm_htu", NULL);
2322 remove_proc_entry("amazon_atm_qsb", NULL);
2323 remove_proc_entry("amazon_atm_swie", NULL);
2324 #endif
2325 }
2326 /* Brief: Initialize ATM module
2327 * Parameters: no
2328 * Return: &g_atm_dev - sucessful
2329 * NULL - fails:
2330 * 1. invalid parameter
2331 * 2. No memory available
2332 * Description:
2333 * This function configure the TPE components according to the input info,
2334 * -CBM
2335 * -HTU
2336 * -QSB
2337 * -AAL5
2338 *
2339 */
2340 amazon_atm_dev_t * amazon_atm_create(void)
2341 {
2342 int i;
2343 AMAZON_TPE_DMSG("atm_init\n");
2344 /************initialize global data structure****************/
2345 atm_constructor(&g_atm_dev);
2346 /***********allocate kernel resources****************/
2347 //bottom halfs for SWEX
2348 swex_start_task.routine = amazon_atm_swex;
2349 swex_start_task.data = NULL;
2350 swex_complete_task.routine = amazon_atm_swex_push;
2351 swex_complete_task.data = NULL;
2352 #ifdef AMAZON_TPE_SCR
2353 a5r_task.routine = amazon_atm_a5r;
2354 a5r_task.data = NULL;
2355 #endif //AMAZON_TPE_SCR
2356 //SWIN semaphore
2357 sema_init(&(g_atm_dev.swie.in_sem), 1);
2358 //SWIE lock
2359 clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
2360 //SWIE wait queue
2361 init_waitqueue_head(&(g_atm_dev.swie.sleep));
2362 atm_create_proc();
2363
2364 //register DMA
2365 memset(&g_dma_dev,0,sizeof(struct dma_device_info));
2366 strcpy(g_dma_dev.device_name,"TPE");
2367 g_dma_dev.weight=1;
2368 g_dma_dev.num_tx_chan=2;
2369 g_dma_dev.num_rx_chan=2;
2370 g_dma_dev.ack=1;
2371 g_dma_dev.tx_burst_len=4;
2372 g_dma_dev.rx_burst_len=4;
2373 //DMA TX
2374
2375 for(i=0;i<1;i++){
2376 g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT;
2377 g_dma_dev.tx_chan[i].desc_num=10;
2378 g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER;
2379 g_dma_dev.tx_chan[i].control=1;
2380 }
2381 //DMA RX
2382 for(i=0;i<2;i++){
2383 g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT;
2384 /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */
2385 g_dma_dev.rx_chan[i].desc_num=10;
2386 g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf);
2387 g_dma_dev.rx_chan[i].control=1;
2388 }
2389 g_dma_dev.intr_handler=amazon_atm_dma_handler;
2390 g_dma_dev.buffer_alloc=amazon_atm_alloc_rx;
2391 g_dma_dev.buffer_free=amazon_atm_free_tx;
2392 dma_device_register(&g_dma_dev);
2393 /***********intialize the atm hardware ****************/
2394 if ( atm_init_hard(&g_atm_dev) != 0){
2395 return NULL;
2396 }
2397 //start CBM
2398 AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR);
2399 wmb();
2400
2401 //Start HTU
2402 AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
2403 wmb();
2404
2405
2406 // Register interrupts for insertion and extraction
2407 request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, SA_INTERRUPT, "tpe_swie", NULL);
2408 request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, SA_INTERRUPT, "tpe_cbm", NULL);
2409 #ifdef AMAZON_ATM_DEBUG
2410 request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, SA_INTERRUPT, "tpe_htu", NULL);
2411 #endif
2412 #ifdef AMAZON_TPE_TEST_AAL5_INT
2413 request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, SA_INTERRUPT, "tpe_aal5", NULL);
2414 #endif
2415 return &g_atm_dev;
2416 }
2417
2418 /* Brief: clean up atm
2419 * Parameters: no
2420 * Return: no
2421 * Description:
2422 * Disable the device.
2423 */
2424 void amazon_atm_cleanup(void){
2425 int i;
2426 clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
2427 wake_up(&g_atm_dev.swie.sleep);
2428 up(&g_atm_dev.swie.in_sem);
2429 // diable SWIE interrupts
2430 AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR);
2431 AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR);
2432 wmb();
2433
2434 // Disable schedulers ( including interrupts )-----------------------
2435 for (i = 0; i < AMAZON_ATM_PORT_NUM; i++);
2436 {
2437 AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR);
2438 AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR);
2439 AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<<QSB_TABLESEL_SHIFT)
2440 | QSB_RAMAC_REG_LOW
2441 | QSB_WRITE
2442 | i,
2443 QSB_RAMAC_ADDR);
2444 }
2445 // disable QSB_Interrupts
2446 AMAZON_WRITE_REGISTER_L( 0, QSB_IMR_ADDR);
2447 AMAZON_WRITE_REGISTER_L( 0, QSB_SRC_ADDR);
2448 // disable CBM interrupts
2449 AMAZON_WRITE_REGISTER_L( 0 , CBM_IMR0_ADDR);
2450 AMAZON_WRITE_REGISTER_L( 0 , CBM_SRC0_ADDR);
2451 // set CBM start bit to 0
2452 AMAZON_WRITE_REGISTER_L(0,CBM_CFG_ADDR);
2453 // request hardware extraction of queue 0, wich should force the CBM
2454 // to recognize that the start bit is not set
2455 AMAZON_WRITE_REGISTER_L(CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR);
2456 // write frame extraction command into the hw extract command register
2457 AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR);
2458 // disable htu
2459 // disable all HTU interrupts
2460 AMAZON_WRITE_REGISTER_L(0 ,HTU_IMR0_ADDR);
2461 AMAZON_WRITE_REGISTER_L(0 ,HTU_SRC0_ADDR);
2462
2463 if (g_atm_dev.cbm.allocated){
2464 free_pages((unsigned long)g_atm_dev.cbm.mem_addr, get_log_2(((CBM_CELL_SIZE * g_atm_dev.cbm.free_cell_cnt) >>PAGE_SHIFT)+1));
2465 #ifdef CONFIG_USE_VENUS
2466 //to work around a bug, bit15 of QDOFF address should be 1
2467 free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4);
2468 #else //CONFIG_USE_VENUS
2469 kfree(g_atm_dev.cbm.qd_addr);
2470 #endif //CONFIG_USE_VENUS
2471 }
2472 atm_delete_proc();
2473 // free interrupts for insertion and extraction
2474 dma_device_unregister(&g_dma_dev);
2475 free_irq(AMAZON_SWIE_INT, NULL);
2476 free_irq(AMAZON_CBM_INT, NULL);
2477 #ifdef AMAZON_ATM_DEBUG
2478 free_irq(AMAZON_HTU_INT, NULL);
2479 #endif
2480 #ifdef AMAZON_TPE_TEST_AAL5_INT
2481 free_irq(AMAZON_AAL5_INT, NULL);
2482 #endif
2483
2484 }
2485
2486 /************************ ATM network interface ***********************************************/
2487 /* Brief: getsockopt
2488 */
2489 int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen)
2490 {
2491 int err=0;
2492 atm_aal5_vcc_t mib_vcc;
2493 AMAZON_TPE_DMSG("1\n");
2494 switch (optname){
2495 case SO_AMAZON_ATM_MIB_VCC:
2496 AMAZON_TPE_DMSG("2\n");
2497 err = amazon_atm_vcc_mib(vcc, &mib_vcc);
2498 AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors);
2499 err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc));
2500 AMAZON_TPE_DMSG("err %u\n",err);
2501 break;
2502 default:
2503 return -EFAULT;
2504 }
2505 return err;
2506 }
2507
2508 /* Brief: IOCTL
2509 */
2510
2511 int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg)
2512 {
2513 int err=0;
2514 //MIB
2515 atm_cell_ifEntry_t mib_cell;
2516 atm_aal5_ifEntry_t mib_aal5;
2517 atm_aal5_vcc_x_t mib_vcc;
2518 if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY;
2519 if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY;
2520
2521 if (_IOC_DIR(cmd) & _IOC_READ)
2522 err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd));
2523 else if (_IOC_DIR(cmd) & _IOC_WRITE)
2524 err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd));
2525 if (err) {
2526 AMAZON_TPE_EMSG("acess verification fails \n");
2527 return -EFAULT;
2528 }
2529 switch(cmd) {
2530 case AMAZON_ATM_MIB_CELL:
2531 err = amazon_atm_cell_mib(&mib_cell,(u32)arg);
2532 if (err==0){
2533 err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell));
2534 }else{
2535 AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n");
2536 }
2537 break;
2538 case AMAZON_ATM_MIB_AAL5:
2539 err = amazon_atm_aal5_mib(&mib_aal5);
2540 if (err==0){
2541 err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5));
2542 }else{
2543 AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n");
2544 }
2545 break;
2546 case AMAZON_ATM_MIB_VCC:
2547 err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc));
2548 AMAZON_TPE_DMSG("return of copy_from_user %x\n",err);
2549 err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc));
2550 if (err==0){
2551 err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc));
2552 }else{
2553 AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n");
2554 }
2555
2556 default:
2557 return -ENOTTY;
2558 }
2559 return err;
2560 }
2561 /* Brief: return a link list of OAM related time stamp info
2562 * Parameter: none
2563 * Return:
2564 a link list of "struct oam_last_activity" data
2565 * Description:
2566 Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated.
2567 Through this call, u get a list of this time stamp for all active connection.
2568 Please note that u have read-only access.
2569 */
2570 const struct oam_last_activity* get_oam_time_stamp()
2571 {
2572 int i,j;
2573 for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;i<CBM_RX_OFFSET+CBM_DEFAULT_Q_OFFSET+AMAZON_ATM_MAX_VCC_NUM;i++){
2574 if (g_atm_dev.queues[i].free != 1 && g_atm_dev.queues[i].vcc != NULL){
2575 //active connection
2576 if (j !=0 ){
2577 g_oam_time_stamp[j-1].next = &g_oam_time_stamp[j];
2578 }
2579 g_oam_time_stamp[j].vpi = g_atm_dev.queues[i].vcc->vpi;
2580 g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci;
2581 g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time;
2582 g_oam_time_stamp[j].next = NULL;
2583 j++;
2584 }
2585 }
2586 if (j==0) {
2587 return NULL;
2588 }else{
2589 return g_oam_time_stamp;
2590 }
2591 }
2592
2593
2594 /* Brief: call back routine for rx
2595 * Parameter:
2596 * vcc atm_vcc pointer
2597 * skb data if no error
2598 err error flag, 0: no error, 1:error
2599 * Return:
2600 * 0
2601 * <>0 cannot push up
2602 * Description:
2603 * release the packet if cannot push up
2604 */
2605 static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err)
2606 {
2607 if (err){
2608 if (vcc && vcc->stats) {
2609 atomic_inc(&vcc->stats->rx_err);
2610 }
2611 }else{
2612 ATM_SKB(skb)->vcc = vcc;
2613
2614 if (!atm_charge(vcc, skb->truesize)){
2615 //no space this vcc
2616 AMAZON_TPE_EMSG("no space for this vcc\n");
2617 dev_kfree_skb_any(skb);
2618 return -ENOMEM;
2619 }
2620 atomic_inc(&vcc->stats->rx);
2621 AMAZON_TPE_DMSG("push to vcc\n");
2622 vcc->push(vcc,skb);
2623 }
2624 return 0;
2625 }
2626 int amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags)
2627 {
2628 return amazon_atm_send_oam(vcc,cell,flags);
2629 }
2630
2631 int amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb)
2632 {
2633 int err=0;
2634 if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) {
2635 err=amazon_atm_send(vcc,skb);
2636 }else{
2637 //not supported
2638 err = -EPROTONOSUPPORT;
2639 }
2640 if (err){
2641 atomic_inc(&vcc->stats->tx_err);
2642 }else{
2643 atomic_inc(&vcc->stats->tx);
2644 }
2645 AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse));
2646 return err;
2647 }
2648
2649 int amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci)
2650 {
2651 vcc->itf = (int) vcc->dev->dev_data;
2652 vcc->vpi = vpi;
2653 vcc->vci = vci;
2654 return(amazon_atm_open(vcc,amazon_atm_net_push));
2655 }
2656
2657 static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs)
2658 {
2659 int qid;
2660
2661 if (vcc == NULL || qos == NULL){
2662 AMAZON_TPE_EMSG("invalid parameters\n");
2663 return -EINVAL;
2664 }
2665 qid = amazon_atm_get_queue(vcc);
2666 if (valid_qid(qid) != 1) {
2667 AMAZON_TPE_EMSG("no vcc connection opened\n");
2668 return -EINVAL;
2669 }
2670 set_qsb(vcc,qos,qid);
2671 return 0;
2672 }
2673
2674 static struct atmdev_ops amazon_atm_ops = {
2675 open: amazon_atm_net_open,
2676 close: amazon_atm_close,
2677 ioctl: amazon_atm_ioctl,
2678 send: amazon_atm_net_send,
2679 send_oam: amazon_atm_net_send_oam,
2680 // getsockopt: amazon_atm_getsockopt,
2681 change_qos: amazon_atm_change_qos,
2682 // proc_read: amazon_atm_proc_read,
2683 owner: THIS_MODULE,
2684 }; // ATM device callback functions
2685
2686 /*
2687 * brief "/proc" function
2688 */
2689 int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data)
2690 {
2691 int buf_off=0; /* for buf */
2692 int i=0,j=0;
2693 int type= (u32)data;//which module
2694 atm_aal5_ifEntry_t mib_aal5;
2695 atm_cell_ifEntry_t mib_cell;
2696 atm_aal5_vcc_t mib_vcc;
2697 switch(type){
2698 case PROC_MIB:
2699 //MIB counter
2700 amazon_atm_aal5_mib(&mib_aal5);
2701 //TX:
2702 buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n");
2703 buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts);
2704 buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros);
2705 buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards);
2706 buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n",
2707 mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l);
2708 //RX:
2709 buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n");
2710 buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n",
2711 mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l);
2712 buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards);
2713 buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors);
2714 buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts);
2715
2716 //Cell level
2717 buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n");
2718 amazon_atm_cell_mib(&mib_cell,0);
2719 #ifdef AMAZON_TPE_READ_ARC
2720 buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
2721 buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
2722 buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
2723 amazon_atm_cell_mib(&mib_cell,1);
2724 buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l);
2725 buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l);
2726 buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors);
2727 #endif
2728 buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos);
2729
2730 buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n");
2731 buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd);
2732 #ifdef AMAZON_TPE_SCR
2733 buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait);
2734 #endif
2735 break;
2736 case PROC_ATM:
2737 //Interface (Port)
2738 buf_off+=sprintf(buf+buf_off,"[Interfaces]\n");
2739 for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
2740 if (g_atm_dev.ports[i].enable==0){
2741 buf_off+=sprintf(buf+buf_off,"\tport[%u] not in use\n",i);
2742 }else{
2743 buf_off+=sprintf(buf+buf_off,"\tport[%u]\n\t\tmax_conn=%u\n"
2744 ,i
2745 ,g_atm_dev.ports[i].max_conn
2746 );
2747 buf_off+=sprintf(buf+buf_off,"\t\ttx_max=%u\n\t\trem=%u\n\t\tcur=%u\n"
2748 ,g_atm_dev.ports[i].tx_max_cr
2749 ,g_atm_dev.ports[i].tx_rem_cr
2750 ,g_atm_dev.ports[i].tx_cur_cr
2751 );
2752 }
2753
2754 }
2755 //Units Info
2756 //AAL5
2757 buf_off+=sprintf(buf+buf_off,"[AAL5]\n\tpad=%c(%x)\n\trx_mtu=%u\n\ttx_mtu=%u\n"
2758 ,g_atm_dev.aal5.padding_byte
2759 ,g_atm_dev.aal5.padding_byte
2760 ,g_atm_dev.aal5.rx_max_sdu
2761 ,g_atm_dev.aal5.tx_max_sdu
2762 );
2763 //CBM
2764 buf_off+=sprintf(buf+buf_off,
2765 "[CBM]\n\tnrt_thr=%u\n\tclp0_thr=%u\n\tclp1_thr=%u\n\ttx_q_threshold=%u\n\trx_q_threshold=%u\n\toam_q_threshold=%u\n\tfree_cell_cnt=%u\n"
2766 ,g_atm_dev.cbm.nrt_thr
2767 ,g_atm_dev.cbm.clp0_thr
2768 ,g_atm_dev.cbm.clp1_thr
2769 ,tx_q_threshold
2770 ,rx_q_threshold
2771 ,oam_q_threshold
2772 ,g_atm_dev.cbm.free_cell_cnt
2773 );
2774 //QSB
2775 buf_off+=sprintf(buf+buf_off,"[QSB]\n\ttau=%u\n\ttstepc=%u\n\tsbl=%u\n"
2776 ,g_atm_dev.qsb.tau
2777 ,g_atm_dev.qsb.tstepc
2778 ,g_atm_dev.qsb.sbl
2779 );
2780 buf_off+=sprintf(buf+buf_off,"[Debugging]\n\taal5_need_copy=%u\n",g_atm_dev.aal5.cnt_cpy);
2781 break;
2782 case PROC_VCC:
2783 for(i=CBM_DEFAULT_Q_OFFSET,j=0;i<g_atm_dev.cbm.max_q_off+CBM_DEFAULT_Q_OFFSET;i++){
2784 if (g_atm_dev.queues[i].free!=1){
2785 buf_off+=sprintf(buf+buf_off,"vcc[%u]\n\tvpi=%u vci=%u itf=%u qid=%u access_time=%u.%u\n"
2786 ,j++
2787 ,g_atm_dev.queues[i].vcc->vpi
2788 ,g_atm_dev.queues[i].vcc->vci
2789 ,g_atm_dev.queues[i].vcc->itf
2790 ,i
2791 ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec
2792 ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec
2793 );
2794 buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
2795 ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class
2796 ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr
2797 ,g_atm_dev.queues[i].vcc->qos.txtp.pcr
2798 ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr
2799 ,g_atm_dev.queues[i].vcc->qos.txtp.scr
2800 ,g_atm_dev.queues[i].vcc->qos.txtp.mbs
2801 ,g_atm_dev.queues[i].vcc->qos.txtp.cdv
2802 );
2803 buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n"
2804 ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class
2805 ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr
2806 ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr
2807 ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr
2808 ,g_atm_dev.queues[i].vcc->qos.rxtp.scr
2809 ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs
2810 ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv
2811 );
2812 __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc);
2813 buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors);
2814 buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs);
2815 #ifdef AMAZON_ATM_DEBUG
2816 if ( valid_qid(i+CBM_RX_OFFSET)){
2817 buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" );
2818 buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]);
2819 buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] );
2820 buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] );
2821 }
2822
2823 buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" );
2824 buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]);
2825 buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] );
2826 buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] );
2827 buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] );
2828
2829 #endif
2830
2831 }
2832
2833 }
2834 break;
2835 default:
2836 break;
2837 }
2838 if(buf_off>0) *eof = 1;
2839 return buf_off;
2840 }
2841
2842 #ifdef AMAZON_TPE_AAL5_RECOVERY
2843 extern int (*tpe_reset)(void);
2844 extern int (*tpe_start)(void);
2845 extern int (*tpe_inject)(void);
2846 /* Brief: Reset TPE hardware
2847 * Description
2848 * This is a wordaround for AAL5 bug. It tries to reset TPE.
2849 * take care of software
2850 * setup all previous connection
2851 */
2852 int amazon_tpe_reset(void)
2853 {
2854 struct atm_vcc * vcc;
2855 int err=0;
2856 int i;
2857 u8 * qd_addr;
2858 u32 reg_l, reg_h;
2859 unsigned int a_cfg_value=0;
2860 unsigned int a_cfg_old_value=0;
2861 atm_aal5_ifEntry_t mib_aal5;
2862 atm_cell_ifEntry_t mib_cell;
2863
2864 //make sure all cells transmitting out first
2865 //Segmentation done
2866 amazon_atm_aal5_mib(&mib_aal5);
2867 reg_l = g_atm_dev.mib_counter.tx_cnt_l;
2868 reg_h = g_atm_dev.mib_counter.tx_cnt_h;
2869 while(1){
2870 mdelay(10);
2871 amazon_atm_aal5_mib(&mib_aal5);
2872 if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){
2873 break;
2874 }
2875 AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n");
2876 reg_l = g_atm_dev.mib_counter.tx_cnt_l;
2877 reg_h = g_atm_dev.mib_counter.tx_cnt_h;
2878 }
2879 //QSB done
2880 qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr);
2881 for (i=1;i<15;i++){
2882 while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0 ){
2883 mdelay(20);
2884 AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err);
2885 }
2886 }
2887 //insurance for interfaces between Aware and CARB
2888 mdelay(100);
2889 amazon_atm_cell_mib(&mib_cell,0);
2890 amazon_atm_cell_mib(&mib_cell,1);
2891 amazon_atm_aal5_mib(&mib_aal5);
2892
2893 mb();
2894 while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) ){
2895 AMAZON_TPE_EMSG("\nwaiting for AWARE");
2896 AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0));
2897 AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1));
2898 AMAZON_TPE_EMSG("\n");
2899 mdelay(1);
2900 }
2901 // disable AAI module
2902 meiDebugRead(A_CFG_ADDR,&a_cfg_value,1);
2903 a_cfg_old_value=a_cfg_value;
2904 a_cfg_value &= (~(0x2800));
2905 meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1);
2906 //clear buffer
2907 a_cfg_value = 0x1;
2908 meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1);
2909 meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1);
2910
2911 if ( atm_init_hard(&g_atm_dev) != 0){
2912 return -EIO;
2913 }
2914 sema_init(&(g_atm_dev.swie.in_sem), 1);
2915 //SWIE lock
2916 clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock));
2917 //SWIE wait queue
2918 init_waitqueue_head(&(g_atm_dev.swie.sleep));
2919
2920 for (i=CBM_DEFAULT_Q_OFFSET;i<AMAZON_ATM_MAX_QUEUE_NUM/2;i++) {
2921 vcc = g_atm_dev.queues[i].vcc;
2922 if (vcc != NULL){
2923 set_qsb(vcc, &vcc->qos, i);
2924 set_qd(vcc, i);
2925 mb();
2926 err=set_htu(vcc,i);
2927 if (err){
2928 AMAZON_TPE_EMSG("set htu entry fails %u\n",err);
2929 }
2930 }
2931 }
2932 meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1);
2933 #if 0
2934 //reset DFE
2935 *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE);
2936 mb();
2937 *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~AMAZON_RST_REQ_DFE);
2938 mb();
2939 #endif
2940
2941 return 0;
2942 }
2943
2944 /* Brief: Send a ATM EoP packet to save DMA channel
2945 */
2946 int amazon_tpe_inject_debug_cell(void)
2947 {
2948 //Send a ATM cell to save DMA channel
2949 u8 qid;
2950 unsigned char atm_cell[48];
2951 qid = 0x11;
2952 AMAZON_TPE_DMSG("qid = %d\n",qid);
2953 memset(atm_cell,0,48);
2954 atm_cell[3] = 0x2;
2955 if ( amazon_atm_swin(qid,atm_cell)) {
2956 AMAZON_TPE_EMSG("cannot insert EoP cell\n");
2957 return -1;
2958 }
2959 return 0;
2960 }
2961
2962 /* Brief: start HTU (TPE)
2963 */
2964
2965 int amazon_tpe_start(void)
2966 {
2967 AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR);
2968 wmb();
2969 return 0;
2970 }
2971 #endif //AMAZON_TPE_AAL5_RECOVERY
2972
2973 #ifdef AMAZON_CHECK_LINK
2974 extern int (*adsl_link_notify)(int);
2975 /* Brief: notify link status of ADSL link
2976 * Parameters: 0 link down
2977 * 1 link up
2978 * Returns: 0 OK
2979 * Details: called by MEI driver
2980 * should update status and inform upper layer
2981 */
2982 int amazon_tpe_link_notify(int status)
2983 {
2984 adsl_link_status = status;
2985 AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down");
2986 if (status == 0){
2987 //wait until no cells in upstream queues
2988 set_current_state(TASK_INTERRUPTIBLE);
2989 schedule_timeout(2*HZ);
2990 }
2991 return 0;
2992 }
2993 #endif //ifdef AMAZON_CHECK_LINK
2994
2995 /*
2996 * Brief: Initialize ATM module
2997 *
2998 * Return Value: ENOMEM - No memory available
2999 * EBUSY - Cannot register atm device
3000 * ERESTARTSYS - Process interrupted by other signal
3001 * 0 - OK, module initialized
3002 *
3003 * Description:
3004 * This function registers an atm device for all UTOPIA devices.
3005 * It also allocates memory for the private device data structures
3006 */
3007 int __init amazon_atm_net_init(void)
3008 {
3009 int i;
3010 int err=0;
3011 amazon_atm_dev_t *dev = NULL;
3012
3013 if ((dev=amazon_atm_create()) != NULL){
3014 for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
3015 if (!dev->ports[i].enable){
3016 amazon_atm_devs[i] = NULL;
3017 continue;
3018 }
3019 amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL);
3020 if (amazon_atm_devs[i] == NULL){
3021 AMAZON_TPE_EMSG("atm_dev_register fails\n");
3022 err = -EIO;
3023 goto amazon_atm_net_init_exit;
3024 }else{
3025 AMAZON_TPE_DMSG("registering device %u\n",i);
3026 amazon_atm_devs[i]->ci_range.vpi_bits = 8;
3027 amazon_atm_devs[i]->ci_range.vci_bits = 16;
3028 amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr;
3029 amazon_atm_devs[i]->dev_data = (void *) i;
3030 }
3031 }
3032
3033 }else{
3034 err = -ENOMEM;
3035 AMAZON_TPE_EMSG("cannot init atm device\n");
3036 goto amazon_atm_net_init_exit;
3037 }
3038 #ifdef AMAZON_TPE_AAL5_RECOVERY
3039 tpe_reset = & amazon_tpe_reset;
3040 tpe_start = & amazon_tpe_start;
3041 tpe_inject = & amazon_tpe_inject_debug_cell;
3042 #endif //AMAZON_TPE_AAL5_RECOVERY
3043 #ifdef AMAZON_CHECK_LINK
3044 adsl_link_notify=amazon_tpe_link_notify;
3045 #endif //AMAZON_CHECK_LINK
3046 amazon_atm_net_init_exit:
3047 return err;
3048 }
3049
3050 void __exit amazon_atm_net_cleanup(void)
3051 {
3052 int i;
3053 amazon_atm_cleanup();
3054 for(i=0;i<AMAZON_ATM_PORT_NUM;i++){
3055 if (amazon_atm_devs[i] != NULL){
3056 AMAZON_TPE_DMSG("unregister dev %u\n",i);
3057 atm_dev_deregister(amazon_atm_devs[i]);
3058 }
3059 }
3060 return;
3061 }
3062 EXPORT_SYMBOL(get_oam_time_stamp);
3063
3064 MODULE_LICENSE ("GPL");
3065 MODULE_AUTHOR("Infineon IFAP DC COM peng.liu@infineon.com");
3066 MODULE_DESCRIPTION("AMAZON ATM driver");
3067
3068 module_init(amazon_atm_net_init);
3069 module_exit(amazon_atm_net_cleanup);
3070
3071
3072
3073
3074
Staging tree of florian