get rid of $Id$ - it has never helped us and it has broken too many patches ;)
[openwrt/staging/florian.git] / target / linux / brcm-2.4 / files / arch / mips / bcm947xx / pcibios.c
1 /*
2 * Low-Level PCI and SB support for BCM47xx (Linux support code)
3 *
4 * Copyright 2006, Broadcom Corporation
5 * All Rights Reserved.
6 *
7 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
8 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
9 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
10 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
11 *
12 */
13
14 #include <linux/config.h>
15 #include <linux/types.h>
16 #include <linux/kernel.h>
17 #include <linux/sched.h>
18 #include <linux/pci.h>
19 #include <linux/init.h>
20 #include <linux/delay.h>
21 #include <asm/io.h>
22 #include <asm/irq.h>
23 #include <asm/paccess.h>
24
25 #include <typedefs.h>
26 #include <osl.h>
27 #include <sbconfig.h>
28 #include <sbutils.h>
29 #include <hndpci.h>
30 #include <pcicfg.h>
31 #include <bcmdevs.h>
32 #include <bcmnvram.h>
33
34 /* Global SB handle */
35 extern sb_t *bcm947xx_sbh;
36 extern spinlock_t bcm947xx_sbh_lock;
37
38 /* Convenience */
39 #define sbh bcm947xx_sbh
40 #define sbh_lock bcm947xx_sbh_lock
41
42 static int
43 sbpci_read_config_byte(struct pci_dev *dev, int where, u8 *value)
44 {
45 unsigned long flags;
46 int ret;
47
48 spin_lock_irqsave(&sbh_lock, flags);
49 ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
50 PCI_FUNC(dev->devfn), where, value, sizeof(*value));
51 spin_unlock_irqrestore(&sbh_lock, flags);
52 return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
53 }
54
55 static int
56 sbpci_read_config_word(struct pci_dev *dev, int where, u16 *value)
57 {
58 unsigned long flags;
59 int ret;
60
61 spin_lock_irqsave(&sbh_lock, flags);
62 ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
63 PCI_FUNC(dev->devfn), where, value, sizeof(*value));
64 spin_unlock_irqrestore(&sbh_lock, flags);
65 return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
66 }
67
68 static int
69 sbpci_read_config_dword(struct pci_dev *dev, int where, u32 *value)
70 {
71 unsigned long flags;
72 int ret;
73
74 spin_lock_irqsave(&sbh_lock, flags);
75 ret = sbpci_read_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
76 PCI_FUNC(dev->devfn), where, value, sizeof(*value));
77 spin_unlock_irqrestore(&sbh_lock, flags);
78 return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
79 }
80
81 static int
82 sbpci_write_config_byte(struct pci_dev *dev, int where, u8 value)
83 {
84 unsigned long flags;
85 int ret;
86
87 spin_lock_irqsave(&sbh_lock, flags);
88 ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
89 PCI_FUNC(dev->devfn), where, &value, sizeof(value));
90 spin_unlock_irqrestore(&sbh_lock, flags);
91 return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
92 }
93
94 static int
95 sbpci_write_config_word(struct pci_dev *dev, int where, u16 value)
96 {
97 unsigned long flags;
98 int ret;
99
100 spin_lock_irqsave(&sbh_lock, flags);
101 ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
102 PCI_FUNC(dev->devfn), where, &value, sizeof(value));
103 spin_unlock_irqrestore(&sbh_lock, flags);
104 return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
105 }
106
107 static int
108 sbpci_write_config_dword(struct pci_dev *dev, int where, u32 value)
109 {
110 unsigned long flags;
111 int ret;
112
113 spin_lock_irqsave(&sbh_lock, flags);
114 ret = sbpci_write_config(sbh, dev->bus->number, PCI_SLOT(dev->devfn),
115 PCI_FUNC(dev->devfn), where, &value, sizeof(value));
116 spin_unlock_irqrestore(&sbh_lock, flags);
117 return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
118 }
119
120 static struct pci_ops pcibios_ops = {
121 sbpci_read_config_byte,
122 sbpci_read_config_word,
123 sbpci_read_config_dword,
124 sbpci_write_config_byte,
125 sbpci_write_config_word,
126 sbpci_write_config_dword
127 };
128
129
130 void __init
131 pcibios_init(void)
132 {
133 ulong flags;
134
135 if (!(sbh = sb_kattach(SB_OSH)))
136 panic("sb_kattach failed");
137 spin_lock_init(&sbh_lock);
138
139 spin_lock_irqsave(&sbh_lock, flags);
140 sbpci_init(sbh);
141 spin_unlock_irqrestore(&sbh_lock, flags);
142
143 set_io_port_base((unsigned long) ioremap_nocache(SB_PCI_MEM, 0x04000000));
144 mdelay(300); /* workaround for atheros cards */
145
146 /* Scan the SB bus */
147 pci_scan_bus(0, &pcibios_ops, NULL);
148
149 }
150
151 char * __init
152 pcibios_setup(char *str)
153 {
154 if (!strncmp(str, "ban=", 4)) {
155 sbpci_ban(simple_strtoul(str + 4, NULL, 0));
156 return NULL;
157 }
158
159 return (str);
160 }
161
162 static u32 pci_iobase = 0x100;
163 static u32 pci_membase = SB_PCI_DMA;
164 static u32 pcmcia_membase = 0x40004000;
165
166 void __init
167 pcibios_fixup_bus(struct pci_bus *b)
168 {
169 struct list_head *ln;
170 struct pci_dev *d;
171 struct resource *res;
172 int pos, size;
173 u32 *base;
174 u8 irq;
175
176 printk("PCI: Fixing up bus %d\n", b->number);
177
178 /* Fix up SB */
179 if (b->number == 0) {
180 for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
181 d = pci_dev_b(ln);
182 /* Fix up interrupt lines */
183 pci_read_config_byte(d, PCI_INTERRUPT_LINE, &irq);
184 d->irq = irq + 2;
185 pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
186 }
187 }
188
189 /* Fix up external PCI */
190 else {
191 for (ln = b->devices.next; ln != &b->devices; ln = ln->next) {
192 d = pci_dev_b(ln);
193 /* Fix up resource bases */
194 for (pos = 0; pos < 6; pos++) {
195 res = &d->resource[pos];
196 base = (res->flags & IORESOURCE_IO) ? &pci_iobase : ((b->number == 2) ? &pcmcia_membase : &pci_membase);
197 if (res->end) {
198 size = res->end - res->start + 1;
199 if (*base & (size - 1))
200 *base = (*base + size) & ~(size - 1);
201 res->start = *base;
202 res->end = res->start + size - 1;
203 *base += size;
204 pci_write_config_dword(d,
205 PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
206 }
207 /* Fix up PCI bridge BAR0 only */
208 if (b->number == 1 && PCI_SLOT(d->devfn) == 0)
209 break;
210 }
211 /* Fix up interrupt lines */
212 if (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))
213 d->irq = (pci_find_device(VENDOR_BROADCOM, SB_PCI, NULL))->irq;
214 pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
215 }
216 }
217 }
218
219 unsigned int
220 pcibios_assign_all_busses(void)
221 {
222 return 1;
223 }
224
225 void
226 pcibios_align_resource(void *data, struct resource *res,
227 unsigned long size, unsigned long align)
228 {
229 }
230
231 int
232 pcibios_enable_resources(struct pci_dev *dev)
233 {
234 u16 cmd, old_cmd;
235 int idx;
236 struct resource *r;
237
238 /* External PCI only */
239 if (dev->bus->number == 0)
240 return 0;
241
242 pci_read_config_word(dev, PCI_COMMAND, &cmd);
243 old_cmd = cmd;
244 for (idx = 0; idx < 6; idx++) {
245 r = &dev->resource[idx];
246 if (r->flags & IORESOURCE_IO)
247 cmd |= PCI_COMMAND_IO;
248 if (r->flags & IORESOURCE_MEM)
249 cmd |= PCI_COMMAND_MEMORY;
250 }
251 if (dev->resource[PCI_ROM_RESOURCE].start)
252 cmd |= PCI_COMMAND_MEMORY;
253 if (cmd != old_cmd) {
254 printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd);
255 pci_write_config_word(dev, PCI_COMMAND, cmd);
256 }
257 return 0;
258 }
259
260 int
261 pcibios_enable_device(struct pci_dev *dev, int mask)
262 {
263 ulong flags;
264 uint coreidx;
265 void *regs;
266
267 /* External PCI device enable */
268 if (dev->bus->number != 0)
269 return pcibios_enable_resources(dev);
270
271 /* These cores come out of reset enabled */
272 if (dev->device == SB_MIPS ||
273 dev->device == SB_MIPS33 ||
274 dev->device == SB_EXTIF ||
275 dev->device == SB_CC)
276 return 0;
277
278 spin_lock_irqsave(&sbh_lock, flags);
279 coreidx = sb_coreidx(sbh);
280 regs = sb_setcoreidx(sbh, PCI_SLOT(dev->devfn));
281 if (!regs)
282 return PCIBIOS_DEVICE_NOT_FOUND;
283
284 /*
285 * The USB core requires a special bit to be set during core
286 * reset to enable host (OHCI) mode. Resetting the SB core in
287 * pcibios_enable_device() is a hack for compatibility with
288 * vanilla usb-ohci so that it does not have to know about
289 * SB. A driver that wants to use the USB core in device mode
290 * should know about SB and should reset the bit back to 0
291 * after calling pcibios_enable_device().
292 */
293 if (sb_coreid(sbh) == SB_USB) {
294 printk(KERN_INFO "SB USB 1.1 init\n");
295 sb_core_disable(sbh, sb_coreflags(sbh, 0, 0));
296 sb_core_reset(sbh, 1 << 29, 0);
297 }
298 /*
299 * USB 2.0 special considerations:
300 *
301 * 1. Since the core supports both OHCI and EHCI functions, it must
302 * only be reset once.
303 *
304 * 2. In addition to the standard SB reset sequence, the Host Control
305 * Register must be programmed to bring the USB core and various
306 * phy components out of reset.
307 */
308 else if (sb_coreid(sbh) == SB_USB20H) {
309
310 uint corerev = sb_corerev(sbh);
311
312 printk(KERN_INFO "SB USB20H init\n");
313 printk(KERN_INFO "SB COREREV: %d\n", corerev);
314
315 if (!sb_iscoreup(sbh)) {
316
317 printk(KERN_INFO "SB USB20H resetting\n");
318
319 sb_core_reset(sbh, 0, 0);
320 writel(0x7FF, (ulong)regs + 0x200);
321 udelay(1);
322 }
323 /* PRxxxx: War for 5354 failures. */
324 if (corerev == 1 || corerev == 2) {
325 uint32 tmp;
326
327 /* Change Flush control reg */
328 tmp = readl((uintptr)regs + 0x400);
329 tmp &= ~8;
330 writel(tmp, (uintptr)regs + 0x400);
331 tmp = readl((uintptr)regs + 0x400);
332 printk(KERN_INFO "USB20H fcr: 0x%x\n", tmp);
333
334 /* Change Shim control reg */
335 tmp = readl((uintptr)regs + 0x304);
336 tmp &= ~0x100;
337 writel(tmp, (uintptr)regs + 0x304);
338 tmp = readl((uintptr)regs + 0x304);
339 printk(KERN_INFO "USB20H shim cr: 0x%x\n", tmp);
340 }
341
342 } else
343 sb_core_reset(sbh, 0, 0);
344
345 sb_setcoreidx(sbh, coreidx);
346 spin_unlock_irqrestore(&sbh_lock, flags);
347
348 return 0;
349 }
350
351 void
352 pcibios_update_resource(struct pci_dev *dev, struct resource *root,
353 struct resource *res, int resource)
354 {
355 unsigned long where, size;
356 u32 reg;
357
358 /* External PCI only */
359 if (dev->bus->number == 0)
360 return;
361
362 where = PCI_BASE_ADDRESS_0 + (resource * 4);
363 size = res->end - res->start;
364 pci_read_config_dword(dev, where, &reg);
365
366 if (dev->bus->number == 1)
367 reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
368 else
369 reg = res->start;
370
371 pci_write_config_dword(dev, where, reg);
372 }
373
374 static void __init
375 quirk_sbpci_bridge(struct pci_dev *dev)
376 {
377 if (dev->bus->number != 1 || PCI_SLOT(dev->devfn) != 0)
378 return;
379
380 printk("PCI: Fixing up bridge\n");
381
382 /* Enable PCI bridge bus mastering and memory space */
383 pci_set_master(dev);
384 pcibios_enable_resources(dev);
385
386 /* Enable PCI bridge BAR1 prefetch and burst */
387 pci_write_config_dword(dev, PCI_BAR1_CONTROL, 3);
388 }
389
390 struct pci_fixup pcibios_fixups[] = {
391 { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, quirk_sbpci_bridge },
392 { 0 }
393 };
394
395 /*
396 * If we set up a device for bus mastering, we need to check the latency
397 * timer as certain crappy BIOSes forget to set it properly.
398 */
399 unsigned int pcibios_max_latency = 255;
400
401 void pcibios_set_master(struct pci_dev *dev)
402 {
403 u8 lat;
404 pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
405 if (lat < 16)
406 lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
407 else if (lat > pcibios_max_latency)
408 lat = pcibios_max_latency;
409 else
410 return;
411 printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", dev->slot_name, lat);
412 pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
413 }
414