ae7f232fc378cccc4adfc6c5b6459b007c92474a
[openwrt/staging/florian.git] / target / linux / ramips / dts / WRTNODE2.dtsi
1 #include "mt7628an.dtsi"
2
3 / {
4 chosen {
5 bootargs = "console=ttyS0,115200";
6 };
7
8 gpio-keys-polled {
9 compatible = "gpio-keys-polled";
10 #address-cells = <1>;
11 #size-cells = <0>;
12 poll-interval = <20>;
13
14 reset {
15 label = "reset";
16 gpios = <&gpio0 5 1>;
17 linux,code = <0x198>;
18 };
19 };
20 };
21
22 &spi0 {
23 status = "okay";
24
25 m25p80@0 {
26 #address-cells = <1>;
27 #size-cells = <1>;
28 compatible = "jedec,spi-nor";
29 reg = <0 0>;
30 spi-max-frequency = <10000000>;
31 m25p,chunked-io = <32>;
32
33 partition@0 {
34 label = "u-boot";
35 reg = <0x0 0x30000>;
36 read-only;
37 };
38
39 partition@30000 {
40 label = "u-boot-env";
41 reg = <0x30000 0x10000>;
42 read-only;
43 };
44
45 factory: partition@40000 {
46 label = "factory";
47 reg = <0x40000 0x10000>;
48 read-only;
49 };
50
51 partition@50000 {
52 label = "firmware";
53 reg = <0x50000 0x1fb0000>;
54 };
55 };
56
57 spidev@1 {
58 #address-cells = <1>;
59 #size-cells = <1>;
60 compatible = "spidev";
61 reg = <1 0>;
62 linux,modalias = "spidev", "spidev";
63 spi-max-frequency = <10000000>;
64 };
65 };
66
67 &uart1 {
68 status = "okay";
69 };
70
71 &i2c {
72 status = "okay";
73 };
74
75 &ethernet {
76 mtd-mac-address = <&factory 0x4>;
77 ralink,port-map = "llllw";
78 };
79
80 &sdhci {
81 status = "okay";
82 };
83
84 &pcie {
85 status = "okay";
86 };
87