X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fflorian.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWHR-1166D.dts;h=d3e9b7a4a425798094ba22bb00d21d8b3d08096e;hp=960c3e176c632a903ef124d2b1a2b8136ee3583c;hb=32877b31dc8e6ae32e3c889edf6a9cbecb8d8b81;hpb=420cdb37837aee84272a9db0fd96adab6b3ca28f diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts index 960c3e176c..d3e9b7a4a4 100644 --- a/target/linux/ramips/dts/WHR-1166D.dts +++ b/target/linux/ramips/dts/WHR-1166D.dts @@ -17,7 +17,7 @@ m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "en25q64"; + compatible = "jedec,spi-nor"; reg = <0 0>; linux,modalias = "m25p80", "mx25l6405d"; spi-max-frequency = <10000000>; @@ -78,7 +78,7 @@ }; gsw@10110000 { - ralink,port4 = "ephy"; + mediatek,port4 = "ephy"; }; wmac@10180000 { @@ -97,35 +97,42 @@ }; }; }; - + gpio-leds { compatible = "gpio-leds"; + power { - label = "buffalo:red:power"; + label = "whr-1166d:red:power"; gpios = <&gpio0 7 1>; }; - status { - label = "buffalo:green:status"; + + wifi { + label = "whr-1166d:green:wifi"; gpios = <&gpio0 8 1>; }; + power2 { - label = "buffalo:green:power"; + label = "whr-1166d:green:power"; gpios = <&gpio0 9 1>; }; - status2 { - label = "buffalo:orange:status"; + + wifi2 { + label = "whr-1166d:orange:wifi"; gpios = <&gpio0 10 1>; }; + internet { - label = "buffalo:green:internet"; + label = "whr-1166d:green:internet"; gpios = <&gpio2 17 1>; }; + router { - label = "buffalo:green:router"; + label = "whr-1166d:orange:router"; gpios = <&gpio2 18 1>; }; + router2 { - label = "buffalo:orange:router"; + label = "whr-1166d:green:router"; gpios = <&gpio2 19 1>; }; }; @@ -135,25 +142,31 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; - s1 { + + reset { label = "reset"; gpios = <&gpio2 12 1>; - linux,code = <0x100>; + linux,code = <0x198>; }; - s2 { + + aoss { label = "aoss"; gpios = <&gpio2 13 1>; - linux,code = <0x101>; + linux,code = <0x211>; }; - s3 { + + ap { label = "ap"; gpios = <&gpio2 14 1>; - linux,code = <0x102>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ }; - s4 { + + bridge { label = "bridge"; gpios = <&gpio2 15 1>; - linux,code = <0x103>; + linux,code = <0x100>; + linux,input-type = <5>; /* EV_SW */ }; }; };