BLMENU:=Block Devices
define KernelPackage/ide-core
+ SUBMENU:=$(BLMENU)
TITLE:=Kernel support for IDE
DESCRIPTION:=\
Useful for usb mass storage devices (e.g. on WL-HDD)\\\
- ide-detect \\\
- ide-disk
KCONFIG:=CONFIG_IDE CONFIG_BLK_DEV_IDE CONFIG_IDE_GENERIC CONFIG_BLK_DEV_IDEDISK
- SUBMENU:=$(BLMENU)
endef
+
define KernelPackage/ide-core/2.4
FILES:= \
$(LINUX_DIR)/drivers/ide/ide-core.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/ide/ide-disk.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,ide-core) $(call AutoLoad,90,ide-detect ide-disk)
endef
+
define KernelPackage/ide-core/2.6
FILES:= \
$(LINUX_DIR)/drivers/ide/ide-core.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/ide/ide-disk.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,ide-core) $(call AutoLoad,90,ide-generic ide-disk)
endef
+
$(eval $(call KernelPackage,ide-core))
+
define KernelPackage/ide-pdc202xx
- TITLE:=PDC202xx IDE driver
SUBMENU:=$(BLMENU)
+ TITLE:=PDC202xx IDE driver
DEPENDS:=@LINUX_2_4
KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
FILES:=$(LINUX_DIR)/drivers/ide/pci/pdc202xx_old.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old)
endef
+
$(eval $(call KernelPackage,ide-pdc202xx))
+
define KernelPackage/ide-aec62xx
- TITLE:=AEC62xx IDE driver
SUBMENU:=$(BLMENU)
+ TITLE:=AEC62xx IDE driver
KCONFIG:=CONFIG_BLK_DEV_AEC62XX
FILES:=$(LINUX_DIR)/drivers/ide/pci/aec62xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,aec62xx)
endef
+
$(eval $(call KernelPackage,ide-aec62xx))
+
define KernelPackage/scsi-core
- TITLE:=Kernel support for SCSI
SUBMENU:=$(BLMENU)
+ TITLE:=Kernel support for SCSI
KCONFIG:=CONFIG_SCSI CONFIG_BLK_DEV_SD
FILES:= \
$(LINUX_DIR)/drivers/scsi/scsi_mod.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/scsi/sd_mod.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,scsi-core))
+
define KernelPackage/libata
- TITLE:=libata
- DESCRIPTION:=libata
- KCONFIG:=CONFIG_ATA
- SUBMENU:=$(BLMENU)
- FILES:=$(LINUX_DIR)/drivers/ata/libata.$(LINUX_KMOD_SUFFIX)
- DEPENDS:=@PCI_SUPPORT @LINUX_2_6
+ SUBMENU:=$(BLMENU)
+ TITLE:=libata
+ DESCRIPTION:=libata
+ DEPENDS:=@PCI_SUPPORT @LINUX_2_6
+ KCONFIG:=CONFIG_ATA
+ FILES:=$(LINUX_DIR)/drivers/ata/libata.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,libata))
+
define KernelPackage/ata-piix
- TITLE:=ata-piix
- DESCRIPTION:=Kernel module for Intel PIIX SATA controller
- KCONFIG:=CONFIG_ATA_PIIX
- SUBMENU:=$(BLMENU)
- AUTOLOAD:=$(call AutoLoad,30,scsi_mod libata sd_mod ata_piix)
- FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.$(LINUX_KMOD_SUFFIX)
- DEPENDS:=+kmod-libata +kmod-ide-core +kmod-scsi-core
+ SUBMENU:=$(BLMENU)
+ TITLE:=ata-piix
+ DESCRIPTION:=Kernel module for Intel PIIX SATA controller
+ DEPENDS:=+kmod-libata +kmod-ide-core +kmod-scsi-core
+ KCONFIG:=CONFIG_ATA_PIIX
+ FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,scsi_mod libata sd_mod ata_piix)
endef
+
$(eval $(call KernelPackage,ata-piix))
+
define KernelPackage/pata-artop
- TITLE:=pata-artop
- DESCRIPTION:=Kernel module for ARTOP PATA controller
- KCONFIG:=CONFIG_PATA_ARTOP
- SUBMENU:=$(BLMENU)
- AUTOLOAD:=$(call AutoLoad,30,scsi_mod libata sd_mod pata_artop)
- FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.$(LINUX_KMOD_SUFFIX)
- DEPENDS:=kmod-libata +kmod-scsi-core
+ SUBMENU:=$(BLMENU)
+ TITLE:=pata-artop
+ DESCRIPTION:=Kernel module for ARTOP PATA controller
+ DEPENDS:=kmod-libata +kmod-scsi-core
+ KCONFIG:=CONFIG_PATA_ARTOP
+ FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,scsi_mod libata sd_mod pata_artop)
endef
-$(eval $(call KernelPackage,pata-artop))
-
+$(eval $(call KernelPackage,pata-artop))
FSMENU:=Filesystems
define KernelPackage/fs-cifs
+ SUBMENU:=$(FSMENU)
TITLE:=CIFS support
DESCRIPTION:=Kernel module for CIFS support
- KCONFIG:=CONFIG_CIFS
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,cifs)
+ KCONFIG:=CONFIG_CIFS
FILES:=$(LINUX_DIR)/fs/cifs/cifs.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,cifs)
endef
define KernelPackage/fs-cifs/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,fs-cifs))
+
define KernelPackage/fs-minix
+ SUBMENU:=$(FSMENU)
TITLE:=Minix filesystem support
DESCRIPTION:=Kernel module for Minix filesystem support
KCONFIG:=CONFIG_MINIX_FS
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,minix)
FILES:=$(LINUX_DIR)/fs/minix/minix.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,minix)
endef
+
$(eval $(call KernelPackage,fs-minix))
+
define KernelPackage/fs-ntfs
+ SUBMENU:=$(FSMENU)
TITLE:=NTFS filesystem support
DESCRIPTION:=Kernel module for NTFS filesystem support
KCONFIG:=CONFIG_NTFS_FS
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,ntfs)
FILES:=$(LINUX_DIR)/fs/ntfs/ntfs.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,ntfs)
endef
+
$(eval $(call KernelPackage,fs-ntfs))
+
define KernelPackage/fs-ext2
+ SUBMENU:=$(FSMENU)
TITLE:=EXT2 filesystem support
DESCRIPTION:=Kernel module for EXT2 filesystem support
KCONFIG:=CONFIG_EXT2_FS
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,ext2)
FILES:=$(LINUX_DIR)/fs/ext2/ext2.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,ext2)
endef
+
$(eval $(call KernelPackage,fs-ext2))
+
define KernelPackage/fs-ext3
+ SUBMENU:=$(FSMENU)
TITLE:=EXT3 filesystem support
DESCRIPTION:=Kernel module for EXT3 filesystem support
KCONFIG:=CONFIG_EXT3_FS
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,jbd ext3)
FILES:= \
$(LINUX_DIR)/fs/jbd/jbd.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/fs/ext3/ext3.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,jbd ext3)
endef
+
$(eval $(call KernelPackage,fs-ext3))
+
define KernelPackage/fs-hfs
+ SUBMENU:=$(FSMENU)
TITLE:=HFS+ filesystem support
DESCRIPTION:=Kernel module for HFS filesystem support
- KCONFIG:=CONFIG_HFS_FS
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,hfs)
+ KCONFIG:=CONFIG_HFS_FS
FILES:=$(LINUX_DIR)/fs/hfs/hfs.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,hfs)
endef
+
define KernelPackage/fs-hfs/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,fs-hfs))
define KernelPackage/fs-hfsplus
+ SUBMENU:=$(FSMENU)
TITLE:=HFS+ filesystem support
DESCRIPTION:=Kernel module for HFS+ filesystem support
- KCONFIG:=CONFIG_HFSPLUS_FS
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,hfsplus)
+ KCONFIG:=CONFIG_HFSPLUS_FS
FILES:=$(LINUX_DIR)/fs/hfsplus/hfsplus.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,hfsplus)
endef
define KernelPackage/fs-hfsplus/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,fs-hfsplus))
+
define KernelPackage/fs-isofs
+ SUBMENU:=$(FSMENU)
TITLE:=ISO9660 filesystem support
DESCRIPTION:=Kernel module for ISO9660 filesystem support
- KCONFIG:=CONFIG_ISO9660_FS
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,isofs)
+ KCONFIG:=CONFIG_ISO9660_FS
FILES:=$(LINUX_DIR)/fs/isofs/isofs.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,isofs)
endef
define Kernel/Package/fs-isofs/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,fs-isofs))
+
define KernelPackage/fs-udf
+ SUBMENU:=$(FSMENU)
TITLE:=UDF filesystem support
DESCRIPTION:=Kernel module for UDF filesystem support
- KCONFIG:=CONFIG_UDF_FS
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,udf)
+ KCONFIG:=CONFIG_UDF_FS
FILES:=$(LINUX_DIR)/fs/udf/udf.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,udf)
endef
define KernelPackage/fs-udf/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,fs-udf))
+
define KernelPackage/fs-nfs
+ SUBMENU:=$(FSMENU)
TITLE:=NFS filesystem support
DESCRIPTION:=Kernel module for NFS support
KCONFIG:=CONFIG_NFS_FS
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,sunrpc lockd nfs)
FILES:= \
$(LINUX_DIR)/net/sunrpc/sunrpc.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/fs/lockd/lockd.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/fs/nfs/nfs.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,sunrpc lockd nfs)
endef
+
$(eval $(call KernelPackage,fs-nfs))
+
define KernelPackage/fs-nfsd
+ SUBMENU:=$(FSMENU)
TITLE:=NFS kernel server support
DESCRIPTION:=Kernel module for NFS kernel server support
KCONFIG:=CONFIG_NFSD
- SUBMENU:=$(FSMENU)
- FILES:= \
- $(LINUX_DIR)/fs/nfsd/nfsd.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/fs/nfsd/nfsd.$(LINUX_KMOD_SUFFIX)
endef
define KernelPackage/fs-nfsd/2.4
$(eval $(call KernelPackage,fs-nfsd))
+
define KernelPackage/fs-msdos
+ SUBMENU:=$(FSMENU)
TITLE:=MSDOS filesystem support
DESCRIPTION:=Kernel module for MSDOS filesystem support
- KCONFIG:=CONFIG_MSDOS_FS
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_MSDOS_FS
+ FILES:=$(LINUX_DIR)/fs/msdos/msdos.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,msdos)
- FILES:= \
- $(LINUX_DIR)/fs/msdos/msdos.$(LINUX_KMOD_SUFFIX)
endef
define KernelPackage/fs-msdos/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,fs-msdos))
+
define KernelPackage/fs-vfat
+ SUBMENU:=$(FSMENU)
TITLE:=VFAT filesystem support
DESCRIPTION:=Kernel module for VFAT filesystem support
- KCONFIG:=CONFIG_VFAT_FS
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
- AUTOLOAD:=$(call AutoLoad,30,fat vfat)
+ KCONFIG:=CONFIG_VFAT_FS
FILES:= \
$(LINUX_DIR)/fs/fat/fat.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/fs/vfat/vfat.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,fat vfat)
endef
define KernelPackage/fs-vfat/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,fs-vfat))
+
define KernelPackage/fs-xfs
+ SUBMENU:=$(FSMENU)
TITLE:=XFS filesystem support
DESCRIPTION:=Kernel module for XFS support
KCONFIG:=CONFIG_XFS_FS
- SUBMENU:=$(FSMENU)
+ FILES:=$(LINUX_DIR)/fs/xfs/xfs.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,sunrpc lockd xfs)
- FILES:= \
- $(LINUX_DIR)/fs/xfs/xfs.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,fs-xfs))
define KernelPackage/nls-base
+ SUBMENU:=$(FSMENU)
TITLE:=Native Language Support
DESCRIPTION:=Kernel module for Native Language Support
KCONFIG:=CONFIG_NLS
- SUBMENU:=$(FSMENU)
- MENU:=1
FILES:=$(LINUX_DIR)/fs/nls/nls_base.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,nls_base)
endef
define KernelPackage/nls-cp437
+ SUBMENU:=$(FSMENU)
TITLE:=Codepage 437 (United States, Canada)
DESCRIPTION:=Kernel module for NLS Codepage 437 (United States, Canada)
- KCONFIG:=CONFIG_NLS_CODEPAGE_437
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_CODEPAGE_437
FILES:=$(LINUX_DIR)/fs/nls/nls_cp437.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_cp437)
endef
define KernelPackage/nfs-c437/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,nls-cp437))
define KernelPackage/nls-cp850
+ SUBMENU:=$(FSMENU)
TITLE:=Codepage 850 (Europe)
DESCRIPTION:=Kernel module for NLS Codepage 850 (Europe)
- KCONFIG:=CONFIG_NLS_CODEPAGE_850
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_CODEPAGE_850
FILES:=$(LINUX_DIR)/fs/nls/nls_cp850.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_cp850)
endef
define KernelPackage/nls-cp850/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,nls-cp850))
+
define KernelPackage/nls-cp1250
+ SUBMENU:=$(FSMENU)
TITLE:=Codepage 1250 (Eastern Europe)
DESCRIPTION:=Kernel module for NLS Codepage 1250 (Eastern Europe)
- KCONFIG:=CONFIG_NLS_CODEPAGE_1250
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_CODEPAGE_1250
FILES:=$(LINUX_DIR)/fs/nls/nls_cp1250.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_cp1250)
endef
define KernelPackage/nls-cp1250/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,nls-cp1250))
+
define KernelPackage/nls-iso8859-1
+ SUBMENU:=$(FSMENU)
TITLE:=ISO 8859-1 (Latin 1; Western European Languages)
DESCRIPTION:=Kernel module for ISO 8859-1 (Latin 1)
- KCONFIG:=CONFIG_NLS_ISO8859_1
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_ISO8859_1
FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-1.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-1)
endef
define KernelPackage/nls-iso8859-1/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,nls-iso8859-1))
+
define KernelPackage/nls-iso8859-2
+ SUBMENU:=$(FSMENU)
TITLE:=ISO 8859-2 (Latin 2; Central European Languages)
DESCRIPTION:=Kernel module for ISO 8859-2 (Latin 2)
- KCONFIG:=CONFIG_NLS_ISO8859_2
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_ISO8859_2
FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-2.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-2)
endef
define KernelPackage/nls-iso8859-2/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,nls-iso8859-2))
+
define KernelPackage/nls-iso8859-15
+ SUBMENU:=$(FSMENU)
TITLE:=ISO 8859-15 (Latin 9; Western, with Euro symbol)
DESCRIPTION:=Kernel module for ISO 8859-15 (Latin 9)
- KCONFIG:=CONFIG_NLS_ISO8859_15
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_ISO8859_15
FILES:=$(LINUX_DIR)/fs/nls/nls_iso8859-15.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_iso8859-15)
endef
define KernelPackage/nls-iso8859-15/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,nls-iso8859-15))
+
define KernelPackage/nls-koi8r
+ SUBMENU:=$(FSMENU)
TITLE:=KOI8-R (Russian)
DESCRIPTION:=Kernel module for KOI8-R (Russian)
- KCONFIG:=CONFIG_NLS_KOI8_R
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_KOI8_R
FILES:=$(LINUX_DIR)/fs/nls/nls_koi8-r.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_koi8-r)
endef
define KernelPackage/nls-koi8r/2.4
DEPENDS:=
endef
+
$(eval $(call KernelPackage,nls-koi8r))
+
define KernelPackage/nls-utf8
+ SUBMENU:=$(FSMENU)
TITLE:=UTF8
DESCRIPTION:=Kernel module for NLS UTF8
- KCONFIG:=CONFIG_NLS_UTF8
DEPENDS:=+kmod-nls-base
- SUBMENU:=$(FSMENU)
+ KCONFIG:=CONFIG_NLS_UTF8
FILES:=$(LINUX_DIR)/fs/nls/nls_utf8.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,25,nls_utf8)
endef
define KernelPackage/nls-utf8/2.4
DEPENDS:=
endef
-$(eval $(call KernelPackage,nls-utf8))
-
+$(eval $(call KernelPackage,nls-utf8))
I2CMENU:=I2C Bus
define KernelPackage/i2c-core
+ SUBMENU:=$(I2CMENU)
TITLE:=I2C support
DESCRIPTION:=Kernel modules for i2c support
DEPENDS:=@LINUX_2_6
- SUBMENU:=$(I2CMENU)
KCONFIG:=CONFIG_I2C
FILES:=$(LINUX_DIR)/drivers/i2c/*.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,i2c-core i2c-dev)
endef
+
$(eval $(call KernelPackage,i2c-core))
+
define KernelPackage/i2c-algos
+ SUBMENU:=$(I2CMENU)
TITLE:=I2C algorithms support
DESCRIPTION:=Kernel modules for various i2c algorithms
DEPENDS:=kmod-i2c-core
- SUBMENU:=$(I2CMENU)
KCONFIG:=CONFIG_I2C_ALGOBIT
FILES:=$(LINUX_DIR)/drivers/i2c/algos/*.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,i2c-algo-bit i2c-algo-pcf i2c-algo-pca)
endef
+
$(eval $(call KernelPackage,i2c-algos))
+
define KernelPackage/i2c-scx200
+ SUBMENU:=$(I2CMENU)
TITLE:=SCX200 i2c support
DESCRIPTION:=Kernel module for SCX200 i2c bus
DEFAULT:=y if LINUX_2_6_X86_Soekris
DEPENDS:=kmod-i2c-core kmod-i2c-algos @LINUX_2_6_X86_Soekris
- SUBMENU:=$(I2CMENU)
KCONFIG:=CONFIG_SCx200_I2C
- FILES:=$(LINUX_DIR)/drivers/i2c/busses/scx200_i2c.$(LINUX_KMOD_SUFFIX) \
+ FILES:= \
+ $(LINUX_DIR)/drivers/i2c/busses/scx200_i2c.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/i2c/busses/i2c-isa.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,70,i2c-isa scx200_i2c)
endef
+
$(eval $(call KernelPackage,i2c-scx200))
include $(INCLUDE_DIR)/netfilter.mk
define KernelPackage/ipt-conntrack
+ SUBMENU:=$(NFMENU)
TITLE:=Modules for connection tracking
DESCRIPTION:=\
Netfilter (IPv4) kernel modules for connection tracking\\\
- ipt_connmark/CONNMARK
KCONFIG:=$(KCONFIG_IPT_CONNTRACK)
FILES:=$(foreach mod,$(IPT_CONNTRACK-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_CONNTRACK-m)))
endef
+
$(eval $(call KernelPackage,ipt-conntrack))
+
define KernelPackage/ipt-filter
+ SUBMENU:=$(NFMENU)
TITLE:=Modules for packet content inspection
DESCRIPTION:=\
Netfilter (IPv4) kernel modules for packet content inspection \\\
- ipt_layer7
KCONFIG:=$(KCONFIG_IPT_FILTER)
FILES:=$(foreach mod,$(IPT_FILTER-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_FILTER-m)))
endef
+
$(eval $(call KernelPackage,ipt-filter))
+
define KernelPackage/ipt-ipopt
+ SUBMENU:=$(NFMENU)
TITLE:=Modules for matching/changing IP packet options
DESCRIPTION:=\
Netfilter (IPv4) modules for matching/changing IP packet options \\\
- ipt_unclean
KCONFIG:=$(KCONFIG_IPT_IPOPT)
FILES:=$(foreach mod,$(IPT_IPOPT-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_IPOPT-m)))
endef
+
$(eval $(call KernelPackage,ipt-ipopt))
+
define KernelPackage/ipt-ipsec
+ SUBMENU:=$(NFMENU)
TITLE:=Modules for matching IPSec packets
DESCRIPTION:=\
Netfilter (IPv4) modules for matching IPSec packets \\\
- ipt_esp
KCONFIG:=$(KCONFIG_IPT_IPSEC)
FILES:=$(foreach mod,$(IPT_IPSEC-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_IPSEC-m)))
endef
+
$(eval $(call KernelPackage,ipt-ipsec))
+
define KernelPackage/ipt-nat
+ SUBMENU:=$(NFMENU)
TITLE:=Modules for extra NAT targets
DESCRIPTION:=\
Netfilter (IPv4) modules for extra NAT targets \\\
- ipt_NETMAP
KCONFIG:=$(KCONFIG_IPT_NAT)
FILES:=$(foreach mod,$(IPT_NAT-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_NAT-m)))
endef
+
$(eval $(call KernelPackage,ipt-nat))
+
define KernelPackage/ipt-nathelper
+ SUBMENU:=$(NFMENU)
TITLE:=Default Conntrack and NAT helpers
DESCRIPTION:=\
Default Netfilter (IPv4) Conntrack and NAT helpers \\\
- ip_conntrack_tftp
KCONFIG:=$(KCONFIG_IPT_NAT_DEFAULT)
FILES:=$(foreach mod,$(IPT_NAT_DEFAULT-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_NAT_DEFAULT-m)))
endef
+
$(eval $(call KernelPackage,ipt-nathelper))
+
define KernelPackage/ipt-nathelper-extra
+ SUBMENU:=$(NFMENU)
TITLE:=Extra Conntrack and NAT helpers
DESCRIPTION:=\
Extra Netfilter (IPv4) Conntrack and NAT helpers \\\
- ip_nat_snmp_basic
KCONFIG:=$(KCONFIG_IPT_NAT_EXTRA)
FILES:=$(foreach mod,$(IPT_NAT_EXTRA-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_NAT_EXTRA-m)))
endef
+
$(eval $(call KernelPackage,ipt-nathelper-extra))
+
define KernelPackage/ipt-imq
+ SUBMENU:=$(NFMENU)
TITLE:=Intermediate Queueing support
DESCRIPTION:=\
Kernel support for Intermediate Queueing devices
KCONFIG:=CONFIG_IP_NF_TARGET_IMQ
FILES:=$(LINUX_DIR)/net/ipv4/netfilter/*IMQ*.$(LINUX_KMOD_SUFFIX) $(LINUX_DIR)/drivers/net/imq.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(patsubst %.ko,%,$(wildcard $(LINUX_DIR)/net/ipv4/netfilter/*IMQ*.$(LINUX_KMOD_SUFFIX) $(LINUX_DIR)/drivers/net/imq.$(LINUX_KMOD_SUFFIX)))))
endef
+
$(eval $(call KernelPackage,ipt-imq))
define KernelPackage/ipt-queue
+ SUBMENU:=$(NFMENU)
TITLE:=Module for user-space packet queueing
DESCRIPTION:=\
Netfilter (IPv4) module for user-space packet queueing \\\
- ipt_QUEUE
KCONFIG:=$(KCONFIG_IPT_QUEUE)
FILES:=$(foreach mod,$(IPT_QUEUE-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_QUEUE-m)))
endef
+
$(eval $(call KernelPackage,ipt-queue))
+
define KernelPackage/ipt-ulog
+ SUBMENU:=$(NFMENU)
TITLE:=Module for user-space packet logging
DESCRIPTION:=\
Netfilter (IPv4) module for user-space packet logging \\\
- ipt_ULOG
KCONFIG:=$(KCONFIG_IPT_ULOG)
FILES:=$(foreach mod,$(IPT_ULOG-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_ULOG-m)))
endef
+
$(eval $(call KernelPackage,ipt-ulog))
+
define KernelPackage/ipt-iprange
+ SUBMENU:=$(NFMENU)
TITLE:=Module for matching ip ranges
DESCRIPTION:=\
Netfilter (IPv4) module for matching ip ranges \\\
Includes: \\\
- ipt_IPRANGE
FILES:=$(LINUX_DIR)/net/ipv4/netfilter/ipt_iprange.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_IPRANGE-m)))
endef
+
$(eval $(call KernelPackage,ipt-iprange))
+
define KernelPackage/ipt-ipset
+ SUBMENU:=$(NFMENU)
TITLE:=IPSET Modules
DESCRIPTION:=\
Netfilter kernel modules for ipset
KCONFIG:=$(KCONFIG_IPT_IPSET)
FILES:=$(foreach mod,$(IPT_IPSET-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_IPSET-m)))
endef
+
$(eval $(call KernelPackage,ipt-ipset))
define KernelPackage/ipt-extra
+ SUBMENU:=$(NFMENU)
TITLE:=Extra modules
DESCRIPTION:=\
Other Netfilter (IPv4) kernel modules\\\
- xt_NOTRACK
KCONFIG:=$(KCONFIG_IPT_EXTRA)
FILES:=$(foreach mod,$(IPT_EXTRA-m),$(LINUX_DIR)/net/$(mod).$(LINUX_KMOD_SUFFIX))
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(IPT_EXTRA-m)))
endef
+
$(eval $(call KernelPackage,ipt-extra))
+
define KernelPackage/ip6tables
+ SUBMENU:=$(NFMENU)
TITLE:=IPv6 modules
DESCRIPTION:=\
Netfilter IPv6 firewalling support
KCONFIG:=CONFIG_IP6_NF_IPTABLES
FILES:=$(LINUX_DIR)/net/ipv6/netfilter/ip*.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(patsubst %.ko,%,$(wildcard $(LINUX_DIR)/net/ipv6/netfilter/ip6_*.$(LINUX_KMOD_SUFFIX)) $(wildcard $(LINUX_DIR)/net/ipv6/netfilter/ip6table_*.$(LINUX_KMOD_SUFFIX)) $(wildcard $(LINUX_DIR)/net/ipv6/netfilter/ip6t_*.$(LINUX_KMOD_SUFFIX)))))
endef
+
$(eval $(call KernelPackage,ip6tables))
define KernelPackage/arptables
+ SUBMENU:=$(NFMENU)
TITLE:=ARP firewalling modules
DESCRIPTION:=\
Kernel modules for ARP firewalling
FILES:=$(LINUX_DIR)/net/ipv4/netfilter/arp*.$(LINUX_KMOD_SUFFIX)
KCONFIG:=CONFIG_IP_NF_ARPTABLES
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(patsubst %.ko,%,$(wildcard $(LINUX_DIR)/net/ipv4/netfilter/arp*.$(LINUX_KMOD_SUFFIX)))))
endef
+
$(eval $(call KernelPackage,arptables))
define KernelPackage/ebtables
+ SUBMENU:=$(NFMENU)
TITLE:=Bridge firewalling modules
DESCRIPTION:=\
Kernel modules for Ethernet Bridge firewalling
DEPENDS:=@LINUX_2_6
FILES:=$(LINUX_DIR)/net/bridge/netfilter/*.$(LINUX_KMOD_SUFFIX)
KCONFIG:=CONFIG_BRIDGE_NF_EBTABLES
- SUBMENU:=$(NFMENU)
AUTOLOAD:=$(call AutoLoad,40,$(notdir $(patsubst %.ko,%,ebtables.ko $(wildcard $(LINUX_DIR)/net/bridge/netfilter/ebtable_*.$(LINUX_KMOD_SUFFIX)) $(wildcard $(LINUX_DIR)/net/bridge/netfilter/ebt_*.$(LINUX_KMOD_SUFFIX)))))
endef
+
$(eval $(call KernelPackage,ebtables))
NSMENU:=Network Support
define KernelPackage/atm
+ SUBMENU:=$(NSMENU)
TITLE:=ATM support
DESCRIPTION:= \
Kernel modules for ATM support
DEPENDS:=@LINUX_2_6
+ KCONFIG:=CONFIG_ATM
FILES:= \
$(LINUX_DIR)/net/atm/atm.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/atm/br2684.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_ATM
- SUBMENU:=$(NSMENU)
AUTOLOAD:=$(call AutoLoad,30,atm br2684)
endef
+
$(eval $(call KernelPackage,atm))
+
define KernelPackage/atmtcp
+ SUBMENU:=$(NSMENU)
TITLE:=ATM over TCP
DESCRIPTION:= \
Kernel module for ATM over TCP support
DEPENDS:=@LINUX_2_6 kmod-atm
- FILES:=$(LINUX_DIR)/drivers/atm/atmtcp.$(LINUX_KMOD_SUFFIX)
KCONFIG:=CONFIG_ATM_TCP CONFIG_ATM_DRIVERS=y
- SUBMENU:=$(NSMENU)
+ FILES:=$(LINUX_DIR)/drivers/atm/atmtcp.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,atmtcp)
endef
+
$(eval $(call KernelPackage,atmtcp))
+
define KernelPackage/bonding
+ SUBMENU:=$(NSMENU)
TITLE:=Ethernet bonding driver
DESCRIPTION:= \
Kernel module for NIC bonding.
- FILES:=$(LINUX_DIR)/drivers/net/bonding/bonding.$(LINUX_KMOD_SUFFIX)
KCONFIG:=CONFIG_BONDING
- SUBMENU:=$(NSMENU)
+ FILES:=$(LINUX_DIR)/drivers/net/bonding/bonding.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,bonding)
endef
$(eval $(call KernelPackage,bonding))
define KernelPackage/ipip
+ SUBMENU:=$(NSMENU)
TITLE:=IP in IP encapsulation support
DESCRIPTION:=\
Kernel modules for IP in IP encapsulation
KCONFIG:=CONFIG_NET_IPIP
- SUBMENU:=$(NSMENU)
endef
define KernelPackage/ipip/2.4
$(LINUX_DIR)/net/ipv4/tunnel4.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,30,ipip tunnel4)
endef
+
$(eval $(call KernelPackage,ipip))
+
define KernelPackage/ipsec
+ SUBMENU:=$(NSMENU)
TITLE:=IPsec related modules (IPv4 and IPv6)
DESCRIPTION:=\
Kernel modules for IPsec support in both IPv4 and IPv6.\\\
Includes:\\\
- af_key\\\
- xfrm_user
- SUBMENU:=$(NSMENU)
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_NET_KEY
FILES:= \
$(LINUX_DIR)/net/key/af_key.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/xfrm/xfrm_user.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,ipsec))
+
define KernelPackage/ipsec4
+ SUBMENU:=$(NSMENU)
TITLE:=IPsec related modules (IPv4)
DESCRIPTION:=\
Kernel modules for IPsec support in IPv4.\\\
- esp4\\\
- ipcomp\\\
- xfrm4_tunnel
- SUBMENU:=$(NSMENU)
- KCONFIG:=CONFIG_INET_AH
DEPENDS:=kmod-ipsec
+ KCONFIG:=CONFIG_INET_AH
FILES:= $(foreach mod,ah4 esp4 ipcomp xfrm4_tunnel, \
$(LINUX_DIR)/net/ipv4/$(mod).$(LINUX_KMOD_SUFFIX) \
)
endef
+
$(eval $(call KernelPackage,ipsec4))
+
define KernelPackage/ipsec6
+ SUBMENU:=$(NSMENU)
TITLE:=IPsec related modules (IPv6)
DESCRIPTION:=\
Kernel modules for IPsec support in IPv6.\\\
- ipcomp6\\\
- xfrm6_tunnel\\\
- tunnel6
- SUBMENU:=$(NSMENU)
- KCONFIG:=CONFIG_INET6_AH
DEPENDS:=kmod-ipsec
+ KCONFIG:=CONFIG_INET6_AH
FILES:= $(foreach mod,ah6 esp6 ipcomp6 xfrm6_tunnel tunnel6, \
$(LINUX_DIR)/net/ipv6/$(mod).$(LINUX_KMOD_SUFFIX) \
)
endef
+
$(eval $(call KernelPackage,ipsec6))
define KernelPackage/ipv6
+ SUBMENU:=$(NSMENU)
TITLE:=IPv6 support
DESCRIPTION:=\
Kernel modules for IPv6 support
KCONFIG:=CONFIG_IPV6
- SUBMENU:=$(NSMENU)
AUTOLOAD:=$(call AutoLoad,20,ipv6)
endef
+
define KernelPackage/ipv6/2.4
FILES:=$(LINUX_DIR)/net/ipv6/ipv6.$(LINUX_KMOD_SUFFIX)
endef
+
define KernelPackage/ipv6/2.6
FILES:= \
$(LINUX_DIR)/net/ipv6/ipv6.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/net/ipv6/sit.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,ipv6))
define KernelPackage/gre
+ SUBMENU:=$(NSMENU)
TITLE:=GRE support
DESCRIPTION:=\
Generic Routing Encapsulation support
KCONFIG:=CONFIG_NET_IPGRE
FILES=$(LINUX_DIR)/net/ipv4/ip_gre.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(NSMENU)
endef
+
$(eval $(call KernelPackage,gre))
define KernelPackage/tun
+ SUBMENU:=$(NSMENU)
TITLE:=Universal TUN/TAP driver
DESCRIPTION:=\
Kernel support for the TUN/TAP tunneling device
KCONFIG:=CONFIG_TUN
FILES:=$(LINUX_DIR)/drivers/net/tun.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(NSMENU)
AUTOLOAD:=$(call AutoLoad,30,tun)
endef
+
$(eval $(call KernelPackage,tun))
define KernelPackage/ppp
+ SUBMENU:=$(NSMENU)
TITLE:=PPP modules
DESCRIPTION:=\
Kernel modules for PPP support
KCONFIG:=CONFIG_PPP
- SUBMENU:=$(NSMENU)
+endef
+
+define KernelPackage/ppp/2.4
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ppp_async.o \
+ $(LINUX_DIR)/drivers/net/ppp_generic.o \
+ $(LINUX_DIR)/drivers/net/slhc.o
+ AUTOLOAD:=$(call AutoLoad,30,slhc ppp_generic ppp_async)
endef
define KernelPackage/ppp/2.6
AUTOLOAD:=$(call AutoLoad,30,crc-ccitt slhc ppp_generic ppp_async)
endef
-define KernelPackage/ppp/2.4
- FILES:= \
- $(LINUX_DIR)/drivers/net/ppp_async.o \
- $(LINUX_DIR)/drivers/net/ppp_generic.o \
- $(LINUX_DIR)/drivers/net/slhc.o
- AUTOLOAD:=$(call AutoLoad,30,slhc ppp_generic ppp_async)
-endef
$(eval $(call KernelPackage,ppp))
define KernelPackage/ppp-synctty
+ SUBMENU:=$(NSMENU)
TITLE:=PPP sync tty support
DESCRIPTION:=\
Kernel modules for PPP sync tty support
DEPENDS:=kmod-ppp
KCONFIG:=CONFIG_PPP_SYNC_TTY
- SUBMENU:=$(NSMENU)
FILES:=$(LINUX_DIR)/drivers/net/ppp_synctty.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,ppp_synctty)
endef
+
$(eval $(call KernelPackage,ppp-synctty))
define KernelPackage/pppoe
+ SUBMENU:=$(NSMENU)
TITLE:=PPPoE support
DESCRIPTION:=\
Kernel modules for PPPoE (PPP over Ethernet) support
FILES:= \
$(LINUX_DIR)/drivers/net/pppoe.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/net/pppox.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(NSMENU)
endef
+
$(eval $(call KernelPackage,pppoe))
define KernelPackage/pppoa
+ SUBMENU:=$(NSMENU)
TITLE:=PPPoA support
DESCRIPTION:=\
Kernel modules for PPPoA (PPP over ATM) support
KCONFIG:=CONFIG_PPPOATM
FILES:=$(LINUX_DIR)/net/atm/pppoatm.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,pppoatm)
- SUBMENU:=$(NSMENU)
endef
+
$(eval $(call KernelPackage,pppoa))
define KernelPackage/mppe
+ SUBMENU:=$(NSMENU)
TITLE:=Microsoft PPP compression/encryption
DESCRIPTION:=Kernel modules for Microsoft PPP compression/encryption
DEPENDS:=kmod-ppp
KCONFIG:=CONFIG_PPP_MPPE_MPPC CONFIG_PPP_MPPE
- SUBMENU:=$(NSMENU)
endef
define KernelPackage/mppe/2.4
FILES:=$(LINUX_DIR)/drivers/net/ppp_mppe.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,31,ppp_mppe)
endef
+
$(eval $(call KernelPackage,mppe))
define KernelPackage/sched
+ SUBMENU:=$(NSMENU)
TITLE:=Traffic schedulers
DESCRIPTION:=\
Kernel schedulers for IP traffic
FILES:=$(LINUX_DIR)/net/sched/*.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(NSMENU)
endef
+
$(eval $(call KernelPackage,sched))
define KernelPackage/ax25
+ SUBMENU:=$(NSMENU)
TITLE:=AX25 support
DESCRIPTION:=Kernel modules for AX25 support
- SUBMENU:=$(NSMENU)
KCONFIG:=CONFIG_AX25 CONFIG_MKISS
FILES:= \
$(LINUX_DIR)/net/ax25/ax25.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/net/hamradio/mkiss.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,80,ax25 mkiss)
endef
+
$(eval $(call KernelPackage,ax25))
define KernelPackage/mp-alg
+ SUBMENU:=$(NSMENU)
TITLE:=ECMP caching algorithms
DEPENDS:=@LINUX_2_6
DESCRIPTION:= \
specifying which algorithm to use for routes. \\\
quagga (at least <=0.99.6) requires a multipath patch to support this \\\
cached mp route feature.
- SUBMENU:=$(NSMENU)
KCONFIG:=CONFIG_IP_ROUTE_MULTIPATH_RR CONFIG_IP_ROUTE_MULTIPATH_RANDOM CONFIG_IP_ROUTE_MULTIPATH_WRANDOM CONFIG_IP_ROUTE_MULTIPATH_DRR
FILES:=$(LINUX_DIR)/net/ipv4/multipath_*.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,35,multipath_rr multipath_random multipath_wrandom multipath_drr)
endef
+
$(eval $(call KernelPackage,mp-alg))
NDMENU:=Network Devices
define KernelPackage/natsemi
+ SUBMENU:=$(NDMENU)
TITLE:=National Semiconductor DP8381x series
DESCRIPTION:=\
Kernel modules for National Semiconductor DP8381x series PCI Ethernet \\\
adapters.
- FILES:=$(LINUX_DIR)/drivers/net/natsemi.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_NATSEMI
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_NATSEMI
+ FILES:=$(LINUX_DIR)/drivers/net/natsemi.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,natsemi)
endef
+
$(eval $(call KernelPackage,natsemi))
+
define KernelPackage/r6040
+ SUBMENU:=$(NDMENU)
TITLE:=RDC Fast-Ethernet support
DESCRIPTION:=\
Kernel modules for RDC Fast-Ethernet adapters.
- FILES:=$(LINUX_DIR)/drivers/net/r6040.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_R6040
DEPENDS:=@LINUX_2_6_RDC
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_R6040
+ FILES:=$(LINUX_DIR)/drivers/net/r6040.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,r6040))
+
define KernelPackage/sis900
+ SUBMENU:=$(NDMENU)
TITLE:=SiS 900 Ethernet support
DESCRIPTION:=\
Kernel modules for Sis 900 Ethernet adapters.
- FILES:=$(LINUX_DIR)/drivers/net/sis900.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_SIS900
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_SIS900
+ FILES:=$(LINUX_DIR)/drivers/net/sis900.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,sis900)
endef
+
$(eval $(call KernelPackage,sis900))
+
define KernelPackage/via-rhine
+ SUBMENU:=$(NDMENU)
TITLE:=Via Rhine ethernet support
DESCRIPTION:=\
Kernel modules for Via Rhine Ethernet chipsets.
- FILES:=$(LINUX_DIR)/drivers/net/via-rhine.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_VIA_RHINE
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_VIA_RHINE
+ FILES:=$(LINUX_DIR)/drivers/net/via-rhine.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,via-rhine)
endef
+
$(eval $(call KernelPackage,via-rhine))
+
define KernelPackage/via-velocity
+ SUBMENU:=$(NDMENU)
TITLE:=VIA Velocity Gigabit Ethernet Adapter kernel support
DESCRIPTION:=\
Kernel modules for VIA Velocity Gigabit Ethernet chipsets.
- FILES:=$(LINUX_DIR)/drivers/net/via-velocity.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_VIA_VELOCITY
DEPENDS:=@LINUX_2_6_IXP4XX
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_VIA_VELOCITY
+ FILES:=$(LINUX_DIR)/drivers/net/via-velocity.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,via-velocity)
endef
+
$(eval $(call KernelPackage,via-velocity))
+
define KernelPackage/8139too
+ SUBMENU:=$(NDMENU)
TITLE:=RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support
DESCRIPTION:=\
Kernel modules for RealTek RTL-8139 PCI Fast Ethernet adapters.
- FILES:=$(LINUX_DIR)/drivers/net/8139too.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_8139TOO
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_8139TOO
+ FILES:=$(LINUX_DIR)/drivers/net/8139too.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,8139too)
endef
+
$(eval $(call KernelPackage,8139too))
+
define KernelPackage/r8169
+ SUBMENU:=$(NDMENU)
TITLE:=RealTek RTL-8169 PCI Gigabit Ethernet Adapter kernel support
DESCRIPTION:=\
Kernel modules for RealTek RTL-8169 PCI Gigabit Ethernet adapters.
- FILES:=$(LINUX_DIR)/drivers/net/r8169.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_R8169 CONFIG_R8169_NAPI=y CONFIG_R8169_VLAN=n
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_R8169 CONFIG_R8169_NAPI=y CONFIG_R8169_VLAN=n
+ FILES:=$(LINUX_DIR)/drivers/net/r8169.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,r8169)
endef
+
$(eval $(call KernelPackage,r8169))
+
define KernelPackage/ne2k-pci
+ SUBMENU:=$(NDMENU)
TITLE:=ne2k-pci Ethernet Adapter kernel support
DESCRIPTION:=\
ne2k-pci Ethernet Adapter kernel support.
- FILES:=$(LINUX_DIR)/drivers/net/ne2k-pci.$(LINUX_KMOD_SUFFIX) \
- $(LINUX_DIR)/drivers/net/8390.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_NE2K_PCI
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_NE2K_PCI
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ne2k-pci.$(LINUX_KMOD_SUFFIX) \
+ $(LINUX_DIR)/drivers/net/8390.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,8390 ne2k-pci)
endef
+
$(eval $(call KernelPackage,ne2k-pci))
+
define KernelPackage/ixp4xx-npe
+ SUBMENU:=$(NDMENU)
TITLE:=Intel(R) IXP4xx ethernet support
DESCRIPTION:=\
Kernel modules for Intel(R) IXP4xx onboard ethernet.
- FILES:=$(LINUX_DIR)/drivers/net/ixp4xx/ixp4xx_npe.$(LINUX_KMOD_SUFFIX) \
+ DEPENDS:=@LINUX_2_6_IXP4XX
+ KCONFIG:=CONFIG_IXP4XX_MAC
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ixp4xx/ixp4xx_npe.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/net/ixp4xx/ixp4xx_qmgr.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/net/ixp4xx/ixp4xx_mac.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_IXP4XX_MAC
- DEPENDS:=@LINUX_2_6_IXP4XX
- SUBMENU:=$(NDMENU)
AUTOLOAD:=$(call AutoLoad,20,ixp4xx_npe ixp4xx_qmgr ixp4xx_mac)
endef
+
$(eval $(call KernelPackage,ixp4xx-npe))
+
define KernelPackage/e100
+ SUBMENU:=$(NDMENU)
TITLE:=Intel(R) PRO/100+ cards kernel support
DESCRIPTION:=\
Kernel modules for Intel(R) PRO/100+ Ethernet adapters.
- FILES:=$(LINUX_DIR)/drivers/net/e100.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_E100
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_E100
+ FILES:=$(LINUX_DIR)/drivers/net/e100.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,e100)
endef
+
$(eval $(call KernelPackage,e100))
+
define KernelPackage/e1000
+ SUBMENU:=$(NDMENU)
TITLE:=Intel(R) PRO/1000 cards kernel support
DESCRIPTION:=\
Kernel modules for Intel(R) PRO/1000 Ethernet adapters.
- FILES:=$(LINUX_DIR)/drivers/net/e1000/e1000.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_E1000
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_E1000
+ FILES:=$(LINUX_DIR)/drivers/net/e1000/e1000.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,e1000)
endef
+
$(eval $(call KernelPackage,e1000))
+
define KernelPackage/3c59x
+ SUBMENU:=$(NDMENU)
TITLE:=3Com 3c590/3c900 series (592/595/597) Vortex/Boomerang
DESCRIPTION:=\
This option enables driver support for a large number of 10mbps and \\\
- "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus \\\
- "Tornado" (3c905) PCI \\\
- "Hurricane" (3c555/3cSOHO) PCI
- FILES:=$(LINUX_DIR)/drivers/net/3c59x.$(LINUX_KMOD_SUFFIX)
- KCONFIG:=CONFIG_3C59X
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(NDMENU)
+ KCONFIG:=CONFIG_3C59X
+ FILES:=$(LINUX_DIR)/drivers/net/3c59x.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,3c59x)
endef
+
$(eval $(call KernelPackage,3c59x))
EMENU:=Other modules
define KernelPackage/crypto
+ SUBMENU:=$(EMENU)
TITLE:=CryptoAPI modules
KCONFIG:= \
CONFIG_CRYPTO_HMAC \
CONFIG_CRYPTO_ECB \
CONFIG_CRYPTO_BLKCIPHER
FILES:=$(LINUX_DIR)/crypto/*.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(EMENU)
endef
+
$(eval $(call KernelPackage,crypto))
+
define KernelPackage/lp
+ SUBMENU:=$(EMENU)
TITLE:=Parallel port and line printer support
DEPENDS:=@LINUX_2_4
KCONFIG:=CONFIG_PARPORT
$(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX)
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,50, \
- parport \
- lp \
- )
+ AUTOLOAD:=$(call AutoLoad,50,parport lp)
endef
+
$(eval $(call KernelPackage,lp))
define KernelPackage/soundcore
+ SUBMENU:=$(EMENU)
TITLE:=Sound support
DESCRIPTION:=Kernel modules for sound support
KCONFIG:=CONFIG_SOUND
- SUBMENU:=$(EMENU)
endef
define KernelPackage/soundcore/2.4
define KernelPackage/loop
+ SUBMENU:=$(EMENU)
TITLE:=Loopback device support
DESCRIPTION:=Kernel module for loopback device support
KCONFIG:=CONFIG_BLK_DEV_LOOP
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,30,loop)
FILES:=$(LINUX_DIR)/drivers/block/loop.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,loop)
endef
+
$(eval $(call KernelPackage,loop))
+
define KernelPackage/nbd
+ SUBMENU:=$(EMENU)
TITLE:=Network block device support
DESCRIPTION:=Kernel module for network block device support
KCONFIG:=CONFIG_BLK_DEV_NBD
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,30,nbd)
FILES:=$(LINUX_DIR)/drivers/block/nbd.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,nbd)
endef
+
$(eval $(call KernelPackage,nbd))
+
define KernelPackage/capi
+ SUBMENU:=$(EMENU)
TITLE:=CAPI Support
DESCRIPTION:=Kernel module for basic CAPI support
- KCONFIG:=CONFIG_ISDN CONFIG_ISDN_CAPI CONFIG_ISDN_CAPI_CAPI20
DEPENDS:=@LINUX_2_6
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,30,kernelcapi capi)
+ KCONFIG:=CONFIG_ISDN CONFIG_ISDN_CAPI CONFIG_ISDN_CAPI_CAPI20
FILES:=$(LINUX_DIR)/drivers/isdn/capi/*capi.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,30,kernelcapi capi)
endef
+
$(eval $(call KernelPackage,capi))
+
define KernelPackage/pcmcia-core
TITLE:=PCMCIA/CardBus support
DESCRIPTION:=Kernel support for PCMCIA/CardBus controllers
DEPENDS:=@PCMCIA_SUPPORT
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_PCMCIA CONFIG_PCCARD CONFIG_PCMCIA_AU1X00
endef
$(LINUX_DIR)/drivers/pcmcia/rsrc_nonstatic.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,pcmcia_core pcmcia rsrc_nonstatic $(PCMCIA_SOCKET_DRIVER))
endef
+
$(eval $(call KernelPackage,pcmcia-core))
define KernelPackage/pcmcia-serial
+ SUBMENU:=$(EMENU)
TITLE:=Serial devices support
DESCRIPTION:=Kernel support for PCMCIA/CardBus serial devices
DEPENDS:=kmod-pcmcia-core
- SUBMENU:=$(EMENU)
- AUTOLOAD:=$(call AutoLoad,45,serial_cs)
KCONFIG:=CONFIG_PCMCIA_SERIAL_CS CONFIG_SERIAL_8250_CS
+ AUTOLOAD:=$(call AutoLoad,45,serial_cs)
endef
define KernelPackage/pcmcia-serial/2.4
define KernelPackage/pcmcia-serial/2.6
FILES:=$(LINUX_DIR)/drivers/serial/serial_cs.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,pcmcia-serial))
define KernelPackage/bluetooth
+ SUBMENU:=$(EMENU)
TITLE:=Bluetooth support
DEPENDS:=@USB_SUPPORT
DESCRIPTION:=Kernel support for Bluetooth devices
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_BLUEZ CONFIG_BT CONFIG_USB_BLUETOOTH
endef
$(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,90,bluetooth l2cap sco rfcomm bnep hci_uart hci_usb)
endef
+
$(eval $(call KernelPackage,bluetooth))
+
define KernelPackage/mmc
+ SUBMENU:=$(EMENU)
TITLE:=MMC/SD Card Support
DEPENDS:=@LINUX_2_6_AT91
DESCRIPTION:=Kernel support for MMC/SD cards
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_MMC
FILES:= \
$(LINUX_DIR)/drivers/mmc/mmc_core.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/mmc/at91_mci.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,90,mmc_core mmc_block at91_mci)
endef
+
$(eval $(call KernelPackage,mmc))
+
define KernelPackage/softdog
+ SUBMENU:=$(EMENU)
TITLE:=Software watchdog driver
DESCRIPTION:=Software watchdog driver
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_SOFT_WATCHDOG
AUTOLOAD:=$(call AutoLoad,50,softdog)
endef
define KernelPackage/softdog/2.6
FILES:=$(LINUX_DIR)/drivers/char/watchdog/softdog.ko
endef
+
$(eval $(call KernelPackage,softdog))
define KernelPackage/videodev
+ SUBMENU:=$(EMENU)
TITLE=Video4Linux support
DESCRIPTION:=Kernel modules for Video4Linux support
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_VIDEO_DEV
FILES:=$(LINUX_DIR)/drivers/media/video/*.$(LINUX_KMOD_SUFFIX)
endef
define KernelPackage/videodev/2.6
AUTOLOAD:=$(call AutoLoad,60,v4l2-common v4l1-compat compat_ioctl32 videodev)
endef
+
$(eval $(call KernelPackage,videodev))
+
define KernelPackage/leds-net48xx
+ SUBMENU:=$(EMENU)
TITLE:=Soekris Net48xx LED support
DESCRIPTION:=Kernel module for Soekris Net48xx LEDs
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_LEDS_NET48XX
FILES:=$(LINUX_DIR)/drivers/leds/leds-net48xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,leds-net48xx)
endef
+
$(eval $(call KernelPackage,leds-net48xx))
+
define KernelPackage/nsc-gpio
+ SUBMENU:=$(EMENU)
TITLE:=Natsemi GPIO support
DESCRIPTION:=Kernel module for Natsemi GPIO
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_NSC_GPIO
FILES:=$(LINUX_DIR)/drivers/char/nsc_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,nsc_gpio)
endef
+
$(eval $(call KernelPackage,nsc-gpio))
+
define KernelPackage/scx200-gpio
+ SUBMENU:=$(EMENU)
TITLE:=Natsemi SCX200 GPIO support
DESCRIPTION:=Kernel module for SCX200 GPIO
DEPENDS:=kmod-nsc-gpio @LINUX_2_6_X86
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_SCx200_GPIO
FILES:=$(LINUX_DIR)/drivers/char/scx200_gpio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_gpio)
endef
+
$(eval $(call KernelPackage,scx200-gpio))
+
define KernelPackage/scx200-wdt
+ SUBMENU:=$(EMENU)
TITLE:=Natsemi SCX200 Watchdog support
DESCRIPTION:=Kernel module for SCX200 Watchdog
DEPENDS:=@LINUX_2_6_X86
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_SC1200_WDT
FILES:=$(LINUX_DIR)/drivers/char/watchdog/scx200_wdt.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,scx200_wdt)
endef
+
$(eval $(call KernelPackage,scx200-wdt))
+
define KernelPackage/hwmon
+ SUBMENU:=$(EMENU)
TITLE:=Hardware monitoring support
DESCRIPTION:=Kernel modules for hardware monitoring
DEPENDS:=@LINUX_2_6
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_HWMON_VID
FILES:= \
$(LINUX_DIR)/drivers/hwmon/hwmon.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/hwmon/hwmon-vid.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,40,hwmon hwmon-vid)
endef
+
$(eval $(call KernelPackage,hwmon))
+
define KernelPackage/hwmon-pc87360
+ SUBMENU:=$(EMENU)
TITLE:=PC87360 monitoring support
DESCRIPTION:=Kernel modules for PC87360 chips
DEPENDS:=kmod-hwmon
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_SENSORS_PC87360
FILES:=$(LINUX_DIR)/drivers/hwmon/pc87360.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,pc87360)
endef
+
$(eval $(call KernelPackage,hwmon-pc87360))
+
define KernelPackage/input-core
+ SUBMENU:=$(EMENU)
TITLE:=Input device core
DESCRIPTION:=Kernel modules for support of input device
- SUBMENU:=$(EMENU)
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_INPUT
FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,input-core)
endef
+
$(eval $(call KernelPackage,input-core))
+
define KernelPackage/input-evdev
+ SUBMENU:=$(EMENU)
TITLE:=Input even device
DESCRIPTION:=Kernel modules for support of input device events
DEPENDS:=+kmod-input-core
- SUBMENU:=$(EMENU)
KCONFIG:=CONFIG_INPUT_EVDEV
FILES:=$(LINUX_DIR)/drivers/input/evdev.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,evdev)
endef
-$(eval $(call KernelPackage,input-evdev))
+$(eval $(call KernelPackage,input-evdev))
DEPENDS:=kmod-usb-core $(1)
endef
+
define KernelPackage/usb-core
+ SUBMENU:=$(USBMENU)
TITLE:=Support for USB
DESCRIPTION:=Kernel support for USB
DEPENDS:=@USB_SUPPORT
KCONFIG:=CONFIG_USB
- SUBMENU:=$(USBMENU)
AUTOLOAD:=$(call AutoLoad,20,usbcore)
endef
define KernelPackage/usb-core/2.6
FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.$(LINUX_KMOD_SUFFIX)
endef
+
$(eval $(call KernelPackage,usb-core))
DESCRIPTION:=Kernel support for USB UHCI controllers
KCONFIG:=CONFIG_USB_UHCI_ALT CONFIG_USB_UHCI_HCD
endef
+
define KernelPackage/usb-uhci/2.4
FILES:=$(LINUX_DIR)/drivers/usb/host/uhci.o
AUTOLOAD:=$(call AutoLoad,50,uhci)
endef
+
define KernelPackage/usb-uhci/2.6
FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko
AUTOLOAD:=$(call AutoLoad,50,uhci-hcd)
endef
+
$(eval $(call KernelPackage,usb-uhci))
+
define KernelPackage/usb-uhci-iv
$(call usbdep,@LINUX_2_4)
TITLE:=Support for Intel/VIA UHCI controllers
DESCRIPTION:=Kernel support for Intel/VIA USB UHCI controllers
- FILES:=$(LINUX_DIR)/drivers/usb/host/usb-uhci.$(LINUX_KMOD_SUFFIX)
KCONFIG:=CONFIG_USB_UHCI
+ FILES:=$(LINUX_DIR)/drivers/usb/host/usb-uhci.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,usb-uhci)
endef
+
$(eval $(call KernelPackage,usb-uhci-iv))
+
define KernelPackage/usb-ohci
$(call usbdep,)
TITLE:=Support for OHCI controllers
FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko
AUTOLOAD:=$(call AutoLoad,50,ohci-hcd)
endef
+
$(eval $(call KernelPackage,usb-ohci))
+
define KernelPackage/usb-adm5120
$(call usbdep,@LINUX_2_6_ADM5120||@LINUX_2_6_ADM5120EB)
TITLE:=Support for the ADM5120 HCD controller
FILES:=$(LINUX_DIR)/drivers/usb/host/adm5120-hcd.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,adm5120-hcd)
endef
+
$(eval $(call KernelPackage,usb-adm5120))
+
define KernelPackage/usb2
$(call usbdep,)
TITLE:=Support for USB2 controllers
DESCRIPTION:=Kernel support for USB2 (EHCI) controllers
- FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.$(LINUX_KMOD_SUFFIX)
KCONFIG:=CONFIG_USB_EHCI_HCD
+ FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-hcd.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,ehci-hcd)
endef
+
$(eval $(call KernelPackage,usb2))
FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko
AUTOLOAD:=$(call AutoLoad,60,cdc-acm)
endef
+
$(eval $(call KernelPackage,usb-acm))
$(LINUX_DIR)/sound/usb/snd-usb-audio.ko
AUTOLOAD:=$(call AutoLoad,60,snd-usb-lib snd-usb-audio)
endef
+
$(eval $(call KernelPackage,usb-audio))
FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko
AUTOLOAD:=$(call AutoLoad,60,usblp)
endef
+
$(eval $(call KernelPackage,usb-printer))
FILES:=$(LINUX_DIR)/drivers/usb/serial/usbserial.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,usbserial)
endef
+
$(eval $(call KernelPackage,usb-serial))
+
define KernelPackage/usb-serial-airprime
$(call usbdep,kmod-usb-serial @LINUX_2_6)
TITLE:=Support for Airprime (EVDO)
FILES:=$(LINUX_DIR)/drivers/usb/serial/airprime.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,airprime)
endef
+
$(eval $(call KernelPackage,usb-serial-airprime))
+
define KernelPackage/usb-serial-belkin
$(call usbdep,kmod-usb-serial)
TITLE:=Support for Belkin devices
FILES:=$(LINUX_DIR)/drivers/usb/serial/belkin_sa.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,belkin_sa)
endef
+
$(eval $(call KernelPackage,usb-serial-belkin))
FILES:=$(LINUX_DIR)/drivers/usb/serial/ftdi_sio.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,ftdi_sio)
endef
+
$(eval $(call KernelPackage,usb-serial-ftdi))
FILES:=$(LINUX_DIR)/drivers/usb/serial/mct_u232.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,mct_u232)
endef
+
$(eval $(call KernelPackage,usb-serial-mct))
+
define KernelPackage/usb-serial-pl2303
$(call usbdep,kmod-usb-serial)
TITLE:=Support for Prolific PL2303 devices
FILES:=$(LINUX_DIR)/drivers/usb/serial/pl2303.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,pl2303)
endef
+
$(eval $(call KernelPackage,usb-serial-pl2303))
FILES:=$(LINUX_DIR)/drivers/usb/serial/sierra.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,sierra)
endef
+
$(eval $(call KernelPackage,usb-serial-sierrawireless))
FILES:=$(LINUX_DIR)/drivers/usb/serial/visor.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,visor)
endef
+
$(eval $(call KernelPackage,usb-serial-visor))
+
define KernelPackage/usb-serial-keyspan
$(call usbdep,kmod-usb-serial)
TITLE:=Support for Keyspan USB-to-Serial devices
FILES:=$(LINUX_DIR)/drivers/usb/serial/keyspan.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,keyspan)
endef
+
$(eval $(call KernelPackage,usb-serial-keyspan))
+
define KernelPackage/usb-serial-option
$(call usbdep,kmod-usb-serial @LINUX_2_6)
TITLE:=Support for Option HSDPA modems
FILES:=$(LINUX_DIR)/drivers/usb/serial/option.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,65,option)
endef
+
$(eval $(call KernelPackage,usb-serial-option))
TITLE:=USB Storage support
DESCRIPTION:=Kernel support for USB Mass Storage devices
KCONFIG:=CONFIG_USB_STORAGE
- FILES:= \
- $(LINUX_DIR)/drivers/usb/storage/usb-storage.$(LINUX_KMOD_SUFFIX)
+ FILES:=$(LINUX_DIR)/drivers/usb/storage/usb-storage.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,scsi_mod sd_mod usb-storage)
endef
+
$(eval $(call KernelPackage,usb-storage))
+
define KernelPackage/usb-atm
$(call usbdep,@LINUX_2_6 kmod-atm)
TITLE:=Support for ATM on USB bus
FILES:=$(LINUX_DIR)/drivers/usb/atm/usbatm.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,usbatm)
endef
+
$(eval $(call KernelPackage,usb-atm))
+
define KernelPackage/usb-speedtouch
$(call usbdep,@LINUX_2_6 kmod-atm)
TITLE:=Support for SpeedTouch ADSL modems
FILES:=$(LINUX_DIR)/drivers/usb/atm/speedtch.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,70,speedtch)
endef
+
$(eval $(call KernelPackage,usb-speedtouch))
+
define KernelPackage/ueagle-atm
$(call usbdep,@LINUX_2_6 kmod-atm)
TITLE:=Driver for Eagle 8051 based USB ADSL modems
KCONFIG:=CONFIG_USB_UEAGLEATM
AUTOLOAD:=$(call AutoLoad,70,ueagle-atm)
endef
+
$(eval $(call KernelPackage,ueagle-atm))
+
define KernelPackage/usb-pwc
$(call usbdep,+kmod-videodev @LINUX_2_6)
TITLE:=Philips WebCam driver
$(eval $(call KernelPackage,usb-pwc))
+
define KernelPackage/cpia2
$(call usbdep,+kmod-videodev @LINUX_2_6)
TITLE:=CPIA2 video driver
DESCRIPTION:=Kernel modules for CPIA2 WebCam devices
KCONFIG:=CONFIG_VIDEO_CPIA2
- AUTOLOAD:=$(call AutoLoad,70,cpia2)
FILES:=$(LINUX_DIR)/drivers/media/video/cpia2/cpia2.$(LINUX_KMOD_SUFFIX)
+ AUTOLOAD:=$(call AutoLoad,70,cpia2)
endef
+
$(eval $(call KernelPackage,cpia2))
+
define KernelPackage/usb-net
$(call usbdep,)
TITLE:=Kernel modules for USB-to-Ethernet convertors
$(eval $(call KernelPackage,usb-net))
+
define KernelPackage/usb-net-asix
$(call usbdep,kmod-usb-net @LINUX_2_6)
TITLE:=Kernel module for USB-to-Ethernet Asix convertors
$(eval $(call KernelPackage,usb-net-asix))
+
define KernelPackage/usb-net-kaweth
$(call usbdep,kmod-usb-net @LINUX_2_6)
TITLE:=Kernel module for USB-to-Ethernet Kaweth convertors
$(eval $(call KernelPackage,usb-net-kaweth))
+
define KernelPackage/usb-net-pegasus
$(call usbdep,kmod-usb-net @LINUX_2_6)
TITLE:=Kernel module for USB-to-Ethernet Pegasus convertors
$(eval $(call KernelPackage,usb-net-pegasus))
+
define KernelPackage/usb-hid
$(call usbdep,@LINUX_2_6 +kmod-input-core +kmod-input-evdev)
TITLE:=Support for USB Human Input Devices
$(eval $(call KernelPackage,usb-hid))
+
define KernelPackage/usb-yealink
$(call usbdep,@LINUX_2_6 +kmod-input-core +kmod-input-evdev)
TITLE:=USB Yealink VOIP phone
FILES:=$(LINUX_DIR)/drivers/$(USBINPUT_DIR)/yealink.ko
AUTOLOAD:=$(call AutoLoad,70,yealink)
endef
-$(eval $(call KernelPackage,usb-yealink))
-
+$(eval $(call KernelPackage,usb-yealink))
WIMENU:=Wireless Drivers
define KernelPackage/ieee80211
+ SUBMENU:=$(WIMENU)
TITLE:=802.11 Networking stack
DESCRIPTION:=\\\
\\\
ieee80211_crypt_tkip \
ieee80211_crypt_ccmp \
)
- SUBMENU:=$(WIMENU)
endef
+
$(eval $(call KernelPackage,ieee80211))
define KernelPackage/ieee80211-softmac
+ SUBMENU:=$(WIMENU)
TITLE:=ieee80211 SoftMAC support
DEPENDS:=kmod-ieee80211
KCONFIG:=CONFIG_IEEE80211_SOFTMAC
FILES:= \
$(LINUX_DIR)/net/ieee80211/softmac/*.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,20,ieee80211softmac)
- SUBMENU:=$(WIMENU)
endef
+
$(eval $(call KernelPackage,ieee80211-softmac))
+
define KernelPackage/net-bcm43xx
+ SUBMENU:=$(WIMENU)
TITLE:=Broadcom BCM43xx driver
DESCRIPTION:=\\\
\\\
KCONFIG:=CONFIG_BCM43XX
FILES:=$(LINUX_DIR)/drivers/net/wireless/bcm43xx/bcm43xx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,bcm43xx)
- SUBMENU:=$(WIMENU)
endef
+
$(eval $(call KernelPackage,net-bcm43xx))
+
define KernelPackage/net-ipw2100
+ SUBMENU:=$(WIMENU)
TITLE:=Intel IPW2100 driver
DESCRIPTION:=\\\
\\\
KCONFIG:=CONFIG_IPW2100
FILES:=$(LINUX_DIR)/drivers/net/wireless/ipw2100.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,ipw2100)
- SUBMENU:=$(WIMENU)
endef
+
$(eval $(call KernelPackage,net-ipw2100))
+
define KernelPackage/net-ipw2200
+ SUBMENU:=$(WIMENU)
TITLE:=Intel IPW2200 driver
DESCRIPTION:=\\\
\\\
KCONFIG:=CONFIG_IPW2200
FILES:=$(LINUX_DIR)/drivers/net/wireless/ipw2200.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,ipw2200)
- SUBMENU:=$(WIMENU)
endef
+
$(eval $(call KernelPackage,net-ipw2200))
define KernelPackage/net-airo
+ SUBMENU:=$(WIMENU)
TITLE:=Cisco Aironet driver
DESCRIPTION:=Driver for Cisco Aironet cards
KCONFIG:=CONFIG_AIRO
- SUBMENU:=$(WIMENU)
FILES:=$(LINUX_DIR)/drivers/net/wireless/airo.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,airo)
endef
+
$(eval $(call KernelPackage,net-airo))
define KernelPackage/net-hermes
+ SUBMENU:=$(WIMENU)
TITLE:=Hermes 802.11b chipset support
DESCRIPTION:=Kernel support for Hermes 802.11b chipsets
DEPENDS:=@LINUX_2_6
KCONFIG:=CONFIG_HERMES
- SUBMENU:=$(WIMENU)
FILES:= \
$(LINUX_DIR)/drivers/net/wireless/hermes.$(LINUX_KMOD_SUFFIX) \
$(LINUX_DIR)/drivers/net/wireless/orinoco.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,50,hermes orinoco)
endef
+
$(eval $(call KernelPackage,net-hermes))
define KernelPackage/net-hermes-pci
+ SUBMENU:=$(WIMENU)
TITLE:=Intersil Prism 2.5 PCI support
DESCRIPTION:=Kernel modules for Intersil Prism 2.5 PCI support
DEPENDS:=kmod-net-hermes
FILES:=$(LINUX_DIR)/drivers/net/wireless/orinoco_pci.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,55,orinoco_pci)
endef
+
$(eval $(call KernelPackage,net-hermes-pci))
define KernelPackage/net-hermes-plx
+ SUBMENU:=$(WIMENU)
TITLE:=PLX9052 based PCI adaptor
DESCRIPTION:=Kernel modules for Hermes in PLX9052 based PCI adaptors
DEPENDS:=kmod-net-hermes
KCONFIG:=CONFIG_PLX_HERMES
- SUBMENU:=$(WIMENU)
FILES:=$(LINUX_DIR)/drivers/net/wireless/orinoco_plx.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,55,orinoco_plx)
endef
+
$(eval $(call KernelPackage,net-hermes-plx))
define KernelPackage/net-prism54
+ SUBMENU:=$(WIMENU)
TITLE:=Intersil Prism54 support
DESCRIPTION:=Kernel modules for Intersil Prism54 support
KCONFIG:=CONFIG_PRISM54
FILES:=$(LINUX_DIR)/drivers/net/wireless/prism54/prism54.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,prism54)
endef
+
$(eval $(call KernelPackage,net-prism54))
define KernelPackage/net-zd1211rw
+ SUBMENU:=$(WIMENU)
TITLE:=Zydas ZD1211 support
DESCRIPTION:=Kernel modules Zydas ZD1211 support, kernel version
- KCONFIG:=CONFIG_ZD1211RW
DEPENDS:=+kmod-ieee80211 +zd1211-firmware @LINUX_2_6
- SUBMENU:=$(WIMENU)
+ KCONFIG:=CONFIG_ZD1211RW
FILES:=$(LINUX_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.$(LINUX_KMOD_SUFFIX)
AUTOLOAD:=$(call AutoLoad,60,zd1211rw)
endef
+
$(eval $(call KernelPackage,net-zd1211rw))
projects / openwrt / staging / florian.git / commitdiff