From 1cc092f72bbe58261f1fd7b928b67f4bc7a67d26 Mon Sep 17 00:00:00 2001 From: Ben Mulvihill Date: Tue, 5 Jul 2016 19:35:05 +0200 Subject: [PATCH] lantiq: mac address setting on BTHOMEHUBV3A Rename uboot environment partition on BT Home Hub 3A so that mac address setting works correctly. Also, the mac address field in the ath9k calibration data is not used, and should not be referenced in the dts. Signed-off-by: Ben Mulvihill --- target/linux/lantiq/dts/BTHOMEHUBV3A.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts index 595668f59e..1d61d81af2 100644 --- a/target/linux/lantiq/dts/BTHOMEHUBV3A.dts +++ b/target/linux/lantiq/dts/BTHOMEHUBV3A.dts @@ -64,7 +64,7 @@ read-only; }; partition@64000 { - label = "uboot-config"; + label = "uboot_env"; reg = <0x64000 0x004000>; }; ath9k_cal: partition@68000 { @@ -85,7 +85,6 @@ ath9k_eep { compatible = "ath9k,eeprom"; ath,eep-flash = <&ath9k_cal 0x0000>; - ath,mac-offset = <0x10c>; ath,pci-slot = <14>; ath,eep-endian; }; -- 2.30.2