From 3559931d8f9b3d53374aca52e83f389f42746cac Mon Sep 17 00:00:00 2001 From: Claudio Mignanti Date: Thu, 13 Jan 2011 12:01:07 +0000 Subject: [PATCH] Fix i2c driver and package it SVN-Revision: 24975 --- package/kernel/modules/i2c.mk | 15 + target/linux/at91/patches/100-at91_i2c.patch | 285 +++++++++++++++++++ 2 files changed, 300 insertions(+) create mode 100644 target/linux/at91/patches/100-at91_i2c.patch diff --git a/package/kernel/modules/i2c.mk b/package/kernel/modules/i2c.mk index 9612f965f9..8ca3819278 100644 --- a/package/kernel/modules/i2c.mk +++ b/package/kernel/modules/i2c.mk @@ -183,3 +183,18 @@ define KernelPackage/i2c-mv64xxx/description endef $(eval $(call KernelPackage,i2c-mv64xxx)) + +define KernelPackage/at91-i2c + SUBMENU:=$(I2C_MENU) + TITLE:=I2C (TWI) master driver for Atmel AT91 + DEPENDS:=@TARGET_at91 kmod-i2c-core + KCONFIG:=CONFIG_I2C_AT91 + FILES:=$(LINUX_DIR)/drivers/i2c/busses/i2c-at91.ko + AUTOLOAD:=$(call AutoLoad,55,i2c-at91) +endef + +define KernelPackage/at91-i2c/description + Kernel module to use the I2C (TWI) master driver for Atmel AT91 +endef + +$(eval $(call KernelPackage,at91-i2c)) diff --git a/target/linux/at91/patches/100-at91_i2c.patch b/target/linux/at91/patches/100-at91_i2c.patch new file mode 100644 index 0000000000..009feb84e6 --- /dev/null +++ b/target/linux/at91/patches/100-at91_i2c.patch @@ -0,0 +1,285 @@ +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -282,7 +282,7 @@ comment "I2C system bus drivers (mostly + + config I2C_AT91 + tristate "Atmel AT91 I2C Two-Wire interface (TWI)" +- depends on ARCH_AT91 && EXPERIMENTAL && BROKEN ++ depends on ARCH_AT91 && EXPERIMENTAL + help + This supports the use of the I2C interface on Atmel AT91 + processors. +--- a/drivers/i2c/busses/i2c-at91.c ++++ b/drivers/i2c/busses/i2c-at91.c +@@ -11,8 +11,18 @@ + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. ++ ++ D. Gilbert [20100318 AT91SAM9G20] ++ - Check for NACK, a NACK will abort current tranfser, ++ returned as errno=EREMOTEIO unless I2C_M_IGNORE_NAK is set ++ - Only supports 7 bit I2C device (slave) address ++ - clockrate adjustable (module_param). + */ + ++ ++/* Uncomment following line to see dev_dbg() output in logs */ ++/* #define DEBUG 1 */ ++ + #include + #include + #include +@@ -32,26 +42,28 @@ + #define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ + + ++static unsigned int clockrate = TWI_CLOCK; ++static unsigned int prev_clockrate = TWI_CLOCK; + static struct clk *twi_clk; + static void __iomem *twi_base; + + #define at91_twi_read(reg) __raw_readl(twi_base + (reg)) + #define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) + +- + /* +- * Initialize the TWI hardware registers. ++ * Set TWI clock dividers based on clockrate (clock rate for SCL) + */ +-static void __devinit at91_twi_hwinit(void) ++static void at91_twi_clock_dividers(void) + { + unsigned long cdiv, ckdiv; + +- at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */ +- at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */ +- at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ ++ if (clockrate < 1000) ++ clockrate = 1000; ++ else if (clockrate > 400000) ++ clockrate = 400000; + +- /* Calcuate clock dividers */ +- cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; ++ /* Calculate clock dividers */ ++ cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3; + cdiv = cdiv + 1; /* round up */ + ckdiv = 0; + while (cdiv > 255) { +@@ -61,41 +73,92 @@ static void __devinit at91_twi_hwinit(vo + + if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ + if (ckdiv > 5) { +- printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); ++ printk(KERN_ERR "i2c-at91: Invalid AT91RM9200 clock rate\n"); + ckdiv = 5; + } + } ++ /* AT91SAM9G20 has 3 bits for ckdiv so it cannot exceed 7 */ ++ if (cpu_is_at91sam9g20()) { ++ if (ckdiv > 7) { ++ printk(KERN_ERR "i2c-at91: Invalid AT91SAM9G20 clock " ++ "rate, ckdiv=%lu\n", ckdiv); ++ ckdiv = 7; ++ } ++ } + + at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); ++ prev_clockrate = clockrate; + } + + /* +- * Poll the i2c status register until the specified bit is set. +- * Returns 0 if timed out (100 msec). ++ * Initialize the TWI hardware registers. + */ +-static short at91_poll_status(unsigned long bit) ++static void __devinit at91_twi_hwinit(void) + { +- int loop_cntr = 10000; ++ at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */ ++ /* Set Master mode; Atmel suggests disabling slave mode */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN | AT91_TWI_SVDIS); + ++ at91_twi_clock_dividers(); ++} ++ ++/* ++ * Poll the i2c status register until the specified bit is set or a NACK ++ * occurs. Returns 0 if timed out (50 msec). If nack_seen_p is non-NULL ++ * then write 0 to it first, then if the NACK bit is set in the status ++ * register then write 1 to it and immediately return with a value of 1. ++ */ ++static short at91_poll_status(unsigned long bit, int * nack_seen_p) ++{ ++ int loop_cntr = 5000; ++ unsigned long stat; ++ ++ if (nack_seen_p) ++ *nack_seen_p = 0; ++ if (clockrate <= 20000) ++ loop_cntr = 100; + do { +- udelay(10); +- } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0)); ++ if (clockrate <= 20000) ++ udelay(100); ++ else if (clockrate <= 100000) ++ udelay(10); ++ else ++ udelay(3); ++ stat = at91_twi_read(AT91_TWI_SR); ++ if ((stat & AT91_TWI_NACK) && nack_seen_p) { ++ *nack_seen_p = 1; ++ return 1; ++ } ++ } while (!(stat & bit) && (--loop_cntr > 0)); + + return (loop_cntr > 0); + } + + static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) + { ++ int nack_seen = 0; ++ int sent_stop = 0; ++ + /* Send Start */ +- at91_twi_write(AT91_TWI_CR, AT91_TWI_START); ++ if (1 == length) { ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP); ++ sent_stop = 1; ++ } else ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_START); + + /* Read data */ + while (length--) { +- if (!length) /* need to send Stop before reading last byte */ ++ /* send Stop before reading last byte (if not already done) */ ++ if ((0 == length) && (0 == sent_stop)) + at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); +- if (!at91_poll_status(AT91_TWI_RXRDY)) { ++ if (!at91_poll_status(AT91_TWI_RXRDY, &nack_seen)) { + dev_dbg(&adap->dev, "RXRDY timeout\n"); + return -ETIMEDOUT; ++ } else if (nack_seen) { ++ dev_dbg(&adap->dev, "read NACKed\n"); ++ /* NACK supplies Stop */ ++ return -EREMOTEIO; + } + *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff); + } +@@ -105,16 +168,24 @@ static int xfer_read(struct i2c_adapter + + static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length) + { ++ int nack_seen = 0; ++ + /* Load first byte into transmitter */ + at91_twi_write(AT91_TWI_THR, *buf++); + +- /* Send Start */ ++ /* Send Start [AT91SAM9G20 does not need this on write] */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_START); + + do { +- if (!at91_poll_status(AT91_TWI_TXRDY)) { ++ if (!at91_poll_status(AT91_TWI_TXRDY, &nack_seen)) { + dev_dbg(&adap->dev, "TXRDY timeout\n"); ++ /* Set Master mode again */ ++ at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); + return -ETIMEDOUT; ++ } else if (nack_seen) { ++ dev_dbg(&adap->dev, "write NACKed\n"); ++ /* NACK supplies Stop */ ++ return -EREMOTEIO; + } + + length--; /* byte was transmitted */ +@@ -123,7 +194,7 @@ static int xfer_write(struct i2c_adapter + at91_twi_write(AT91_TWI_THR, *buf++); + } while (length); + +- /* Send Stop */ ++ /* Send Stop [AT91SAM9G20 does not need this on write] */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); + + return 0; +@@ -136,11 +207,19 @@ static int xfer_write(struct i2c_adapter + * Instead the "internal device address" has to be written using a separate + * i2c message. + * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html ++ * [dpg] By 2010 silicon bugs should be fixed, will need IADR for 10 bit device address + */ + static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num) + { + int i, ret; ++ int nack_seen = 0; + ++ if (prev_clockrate != clockrate) { ++ dev_dbg(&adap->dev, "at91_xfer: prev_clockrate=%u " ++ "clockrate=%u, change\n", prev_clockrate, clockrate); ++ at91_twi_clock_dividers(); ++ msleep(1); /* let things settle */ ++ } + dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); + + for (i = 0; i < num; i++) { +@@ -158,13 +237,23 @@ static int at91_xfer(struct i2c_adapter + else + ret = xfer_write(adap, pmsg->buf, pmsg->len); + +- if (ret) +- return ret; +- ++ if (ret) { ++ if ((I2C_M_IGNORE_NAK & pmsg->flags) && ++ (-EREMOTEIO == ret)) { ++ dev_dbg(&adap->dev, "transfer " ++ "NACKed, skip to next\n"); ++ pmsg++; ++ continue; ++ } else ++ return ret; ++ } + /* Wait until transfer is finished */ +- if (!at91_poll_status(AT91_TWI_TXCOMP)) { ++ if (!at91_poll_status(AT91_TWI_TXCOMP, &nack_seen)) { + dev_dbg(&adap->dev, "TXCOMP timeout\n"); + return -ETIMEDOUT; ++ } else if (nack_seen) { ++ dev_dbg(&adap->dev, "TXCOMP NACKed\n"); ++ return -EREMOTEIO; + } + } + dev_dbg(&adap->dev, "transfer complete\n"); +@@ -239,7 +328,8 @@ static int __devinit at91_i2c_probe(stru + goto fail3; + } + +- dev_info(&pdev->dev, "AT91 i2c bus driver.\n"); ++ dev_info(&pdev->dev, "AT91 TWI (I2C) bus driver [SCL %d Hz]\n", ++ clockrate); + return 0; + + fail3: +@@ -295,6 +385,11 @@ static int at91_i2c_resume(struct platfo + #define at91_i2c_resume NULL + #endif + ++/* I2C clock speed, in Hz 0-400kHz*/ ++module_param(clockrate, uint, S_IRUGO | S_IWUSR); ++MODULE_PARM_DESC(clockrate, ++ "SCL clock rate, 1000 to 400000 Hz (def: 100 kHz)"); ++ + /* work with "modprobe at91_i2c" from hotplugging or coldplugging */ + MODULE_ALIAS("platform:at91_i2c"); + +@@ -323,5 +418,5 @@ module_init(at91_i2c_init); + module_exit(at91_i2c_exit); + + MODULE_AUTHOR("Rick Bronson"); +-MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91"); ++MODULE_DESCRIPTION("I2C (TWI) master driver for Atmel AT91"); + MODULE_LICENSE("GPL"); -- 2.30.2