target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts

   1 // SPDX-License-Identifier: GPL-2.0+ OR MIT
   2 /dts-v1/;
   3
   4 #include "qcom-ipq4019.dtsi"
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8
   9 / {
  10         model = "ASUS Lyra MAP-AC2200";
  11         compatible = "asus,map-ac2200";
  12
  13         aliases {
  14                 led-boot = &led_blue0;
  15                 led-failsafe = &led_red0;
  16                 led-running = &led_blue0;
  17                 led-upgrade = &led_red0;
  18         };
  19
  20         soc {
  21                 mdio@90000 {
  22                         status = "okay";
  23                 };
  24
  25                 ess-psgmii@98000 {
  26                         status = "okay";
  27                 };
  28
  29                 tcsr@1949000 {
  30                         compatible = "qcom,tcsr";
  31                         reg = <0x1949000 0x100>;
  32                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  33                 };
  34
  35                 ess_tcsr@1953000 {
  36                         compatible = "qcom,tcsr";
  37                         reg = <0x1953000 0x1000>;
  38                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  39                 };
  40
  41                 tcsr@1957000 {
  42                         compatible = "qcom,tcsr";
  43                         reg = <0x1957000 0x100>;
  44                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  45                 };
  46
  47                 usb2@60f8800 {
  48                         status = "okay";
  49                 };
  50
  51                 crypto@8e3a000 {
  52                         status = "okay";
  53                 };
  54
  55                 watchdog@b017000 {
  56                         status = "okay";
  57                 };
  58
  59                 ess-switch@c000000 {
  60                         status = "okay";
  61                 };
  62
  63                 edma@c080000 {
  64                         status = "okay";
  65                 };
  66         };
  67
  68         keys {
  69                 compatible = "gpio-keys";
  70                 reset {
  71                         label = "reset";
  72                         gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_RESTART>;
  74                 };
  75
  76                 wps {
  77                         label = "wps";
  78                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_WPS_BUTTON>;
  80                 };
  81         };
  82 };
  83
  84 &nand {
  85         pinctrl-0 = <&nand_pins>;
  86         pinctrl-names = "default";
  87         status = "okay";
  88
  89         nand@0 {
  90                 partitions {
  91                         compatible = "fixed-partitions";
  92                         #address-cells = <1>;
  93                         #size-cells = <1>;
  94
  95                         partition@0 {
  96                                 label = "SBL1";
  97                                 reg = <0x0 0x80000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@80000 {
 102                                 label = "MIBIB";
 103                                 reg = <0x80000 0x80000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@100000 {
 108                                 label = "QSEE";
 109                                 reg = <0x100000 0x100000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@200000 {
 114                                 label = "CDT";
 115                                 reg = <0x200000 0x80000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@280000 {
 120                                 label = "APPSBL";
 121                                 reg = <0x280000 0x140000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@3c0000 {
 126                                 label = "APPSBLENV";
 127                                 reg = <0x3c0000 0x40000>;
 128                                 read-only;
 129                         };
 130
 131                         partition@400000 {
 132                                 label = "ubi";
 133                                 reg = <0x400000 0x7c00000>;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &tlmm {
 140         i2c_0_pins: i2c_0_pinmux {
 141                 pinmux {
 142                         function = "blsp_i2c0";
 143                         pins = "gpio20", "gpio21";
 144                         drive-strength = <16>;
 145                         bias-disable;
 146                 };
 147         };
 148
 149         serial_pins: serial_pinmux {
 150                 mux {
 151                         pins = "gpio16", "gpio17";
 152                         function = "blsp_uart0";
 153                         bias-disable;
 154                 };
 155         };
 156
 157         nand_pins: nand_pins {
 158                 pullups {
 159                         pins =  "gpio52", "gpio53", "gpio58",
 160                                 "gpio59";
 161                         function = "qpic";
 162                         bias-pull-up;
 163                 };
 164
 165                 pulldowns {
 166                         pins =  "gpio54", "gpio55", "gpio56",
 167                                 "gpio57", "gpio60", "gpio61",
 168                                 "gpio62", "gpio63", "gpio64",
 169                                 "gpio65", "gpio66", "gpio67",
 170                                 "gpio68", "gpio69";
 171                         function = "qpic";
 172                         bias-pull-down;
 173                 };
 174         };
 175 };
 176
 177 &cryptobam {
 178         status = "okay";
 179 };
 180
 181 &blsp_dma {
 182         status = "okay";
 183 };
 184
 185 &qpic_bam {
 186         status = "okay";
 187 };
 188
 189 &wifi0 {
 190         status = "okay";
 191         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 192 };
 193
 194 &wifi1 {
 195         status = "okay";
 196         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 197 };
 198
 199 &pcie0 {
 200         status = "okay";
 201         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 202         wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
 203
 204         bridge@0,0 {
 205                 reg = <0x00000000 0 0 0 0>;
 206                 #address-cells = <3>;
 207                 #size-cells = <2>;
 208                 ranges;
 209
 210                 wifi2: wifi@1,0 {
 211                         compatible = "qcom,ath10k";
 212                         status = "okay";
 213                         reg = <0x00010000 0 0 0 0>;
 214                         qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
 215                 };
 216         };
 217 };
 218
 219 &usb2_hs_phy {
 220         /* Bluetooth module attached via USB */
 221         status = "okay";
 222 };
 223
 224 &blsp1_i2c3 {
 225         pinctrl-0 = <&i2c_0_pins>;
 226         pinctrl-names = "default";
 227         status = "okay";
 228
 229         led-controller@32 {
 230                 /* 9-channel RGB LED controller */
 231                 compatible = "national,lp5523";
 232                 reg = <0x32>;
 233                 clock-mode = [01];
 234
 235                 led_blue0: blue0 {
 236                         chan-name = "blue0";
 237                         label = "map-ac2200:blue:chan0";
 238                         led-cur = [fa];
 239                         max-cur = [ff];
 240                 };
 241
 242                 blue1 {
 243                         chan-name = "blue1";
 244                         label = "map-ac2200:blue:chan1";
 245                         led-cur = [fa];
 246                         max-cur = [ff];
 247                 };
 248
 249                 blue2 {
 250                         chan-name = "blue2";
 251                         label = "map-ac2200:blue:chan2";
 252                         led-cur = [fa];
 253                         max-cur = [ff];
 254                 };
 255
 256                 led_green0: green0 {
 257                         chan-name = "green0";
 258                         label = "map-ac2200:green:chan0";
 259                         led-cur = [fa];
 260                         max-cur = [ff];
 261                 };
 262
 263                 green1 {
 264                         chan-name = "green1";
 265                         label = "map-ac2200:green:chan1";
 266                         led-cur = [fa];
 267                         max-cur = [ff];
 268                 };
 269
 270                 green2 {
 271                         chan-name = "green2";
 272                         label = "map-ac2200:green:chan2";
 273                         led-cur = [fa];
 274                         max-cur = [ff];
 275                 };
 276
 277                 led_red0: red0 {
 278                         chan-name = "red0";
 279                         label = "map-ac2200:red:chan0";
 280                         led-cur = [fa];
 281                         max-cur = [ff];
 282                 };
 283
 284                 red1 {
 285                         chan-name = "red1";
 286                         label = "map-ac2200:red:chan1";
 287                         led-cur = [fa];
 288                         max-cur = [ff];
 289                 };
 290
 291                 red2 {
 292                         chan-name = "red2";
 293                         label = "map-ac2200:red:chan2";
 294                         led-cur = [fa];
 295                         max-cur = [ff];
 296                 };
 297         };
 298 };
 299
 300 &blsp1_uart1 {
 301         pinctrl-0 = <&serial_pins>;
 302         pinctrl-names = "default";
 303         status = "okay";
 304 };