--- /dev/null
+From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 6 Oct 2017 10:52:35 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul
+ XWR-1200
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This info can be used by operating system to setup LED behavior.
+
+Reported-by: Dan Haab <dhaab@luxul.com>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -57,7 +57,8 @@
+ usb {
+ label = "bcm53xx:green:usb";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+- linux,default-trigger = "none";
++ trigger-sources = <&ohci_port2>, <&ehci_port2>;
++ linux,default-trigger = "usbport";
+ };
+
+ status {
--- /dev/null
+From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:22 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
+board design.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-tplink-archer-c9-v1.dtb \
+ bcm47094-dlink-dir-885l.dtb \
+ bcm47094-linksys-panamera.dtb \
++ bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-netgear-r8500.dtb \
+ bcm94708.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (C) 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
++ model = "Luxul XBR-4500 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "timer";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++ status = "okay";
++};
--- /dev/null
+From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:23 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
+board design.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
+ 2 files changed, 64 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-tplink-archer-c9-v1.dtb \
+ bcm47094-dlink-dir-885l.dtb \
+ bcm47094-linksys-panamera.dtb \
++ bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-netgear-r8500.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -0,0 +1,63 @@
++/*
++ * Copyright (C) 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
++ model = "Luxul ABR-4500 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++ status = "okay";
++};
--- /dev/null
+From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:46:59 -0600
+Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
+used for 2.4 GHz.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++
+ 2 files changed, 88 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm953012hr.dtb \
+ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
++ bcm47189-luxul-xap-810.dtb \
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+@@ -0,0 +1,87 @@
++/*
++ * Copyright 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
++ model = "Luxul XAP-810 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ 5ghz {
++ label = "bcm53xx:blue:5ghz";
++ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++
++ system {
++ label = "bcm53xx:green:system";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "timer";
++ };
++ };
++
++ pcie0_leds {
++ compatible = "gpio-leds";
++
++ 2ghz {
++ label = "bcm53xx:blue:2ghz";
++ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&pcie0 {
++ ranges = <0x00000000 0 0 0 0 0x00100000>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ bridge@0,0,0 {
++ reg = <0x0000 0 0 0 0>;
++ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ wifi@0,1,0 {
++ reg = <0x0000 0 0 0 0>;
++ ranges = <0x00000000 0 0 0 0x00100000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ pcie0_chipcommon: chipcommon@0 {
++ reg = <0 0x1000>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++ };
++ };
++};
--- /dev/null
+From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001
+From: Dan Haab <dhaab@luxul.com>
+Date: Mon, 9 Oct 2017 09:47:00 -0600
+Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
+chipset used for 2.4 GHz.
+
+Signed-off-by: Dan Haab <dhaab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++
+ 2 files changed, 51 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm953012hr.dtb \
+ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_53573) += \
++ bcm47189-luxul-xap-1440.dtb \
+ bcm47189-luxul-xap-810.dtb \
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+@@ -0,0 +1,50 @@
++/*
++ * Copyright 2017 Luxul Inc.
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm53573.dtsi"
++
++/ {
++ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
++ model = "Luxul XAP-1440 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ wlan {
++ label = "bcm53xx:blue:wlan";
++ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ system {
++ label = "bcm53xx:green:system";
++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
--- /dev/null
+From 811ae58e76da88106f6d28159d4ea7b163dfaa48 Mon Sep 17 00:00:00 2001
+From: INAGAKI Hiroshi <musashino.open@gmail.com>
+Date: Wed, 7 Mar 2018 20:33:56 +0900
+Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
+dts and cannot configure these LEDs.
+I Added missing LED definitions for WZR-900DHP.
+
+Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
+Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
+ 1 file changed, 68 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -35,6 +35,74 @@
+ 0x88000000 0x08000000>;
+ };
+
++ spi {
++ compatible = "spi-gpio";
++ num-chipselects = <1>;
++ gpio-sck = <&chipcommon 7 0>;
++ gpio-mosi = <&chipcommon 4 0>;
++ cs-gpios = <&chipcommon 6 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ hc595: gpio_spi@0 {
++ compatible = "fairchild,74hc595";
++ reg = <0>;
++ registers-number = <1>;
++ spi-max-frequency = <100000>;
++
++ gpio-controller;
++ #gpio-cells = <2>;
++
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ usb {
++ label = "bcm53xx:green:usb";
++ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
++ };
++
++ power0 {
++ label = "bcm53xx:green:power";
++ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ power1 {
++ label = "bcm53xx:red:power";
++ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
++ };
++
++ router0 {
++ label = "bcm53xx:green:router";
++ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ router1 {
++ label = "bcm53xx:amber:router";
++ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
++ };
++
++ wan {
++ label = "bcm53xx:green:wan";
++ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ wireless0 {
++ label = "bcm53xx:green:wireless";
++ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
++ };
++
++ wireless1 {
++ label = "bcm53xx:amber:wireless";
++ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
--- /dev/null
+From 0c0d1c90ddc44df70401b7cfff178c41b2f83ffa Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 4 Apr 2018 15:14:21 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed
+ partitions syntax
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This new syntax is slightly better designed & uses "compatible" string.
+For details see Documentation/devicetree/bindings/mtd/partition.txt .
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 12 +++++++++---
+ 1 file changed, 9 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -26,9 +26,15 @@
+
+ nand: nand@18028000 {
+ nandcs@0 {
+- partition@0 {
+- label = "ubi";
+- reg = <0x00000000 0x08000000>;
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "ubi";
++ reg = <0x00000000 0x08000000>;
++ };
+ };
+ };
+ };
--- /dev/null
+From 2b3db67ce4bc4d1d8556e87a17df7765da8dbdc5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 2 May 2018 16:11:02 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+
+ / MIT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+These files were created and ever touched by a group of three people
+only: Dan, Hauke and me. They were licensed under GNU/GPL or ISC.
+
+Introducing and discussing SPDX-License-Identifier resulted in a
+conclusion that ISC is a not recommended license (see also a
+license-rules.rst). Moveover an old e-mail from Alan Cox was pointed
+which explained that dual licensing is a safer solution than depending
+on a common compatibility belief.
+
+This commit switches most of BCM5301X DTS files to dual licensing using:
+1) GPL 2.0+ to make sure they are compatible with Linux kernel
+2) MIT to allow sharing with more permissive projects
+Both licenses belong to the preferred ones (see LICENSES/preferred/).
+
+An attempt to relicense remaining files will be made separately and will
+require approve from more/other developers.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
+Acked-by: Dan Haab <dan.haab@luxul.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 13 +------------
+ arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 13 +------------
+ arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 3 +--
+ arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 3 +--
+ arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 +--
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 13 +------------
+ arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 +--
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 13 +------------
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 13 +------------
+ arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 +--
+ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 +--
+ arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 3 +--
+ arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 3 +--
+ arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 13 +------------
+ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 3 +--
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 13 +------------
+ arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 3 +--
+ arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 3 +--
+ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 3 +--
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +--
+ arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
+ arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 3 +--
+ arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 3 +--
+ arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 3 +--
+ arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 3 +--
+ 25 files changed, 25 insertions(+), 120 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC56U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC68U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright 2016 Luxul Inc.
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -1,10 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R6300 V2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -1,10 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for SmartRG SR400ac
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-N18U
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-600DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright 2017 Luxul Inc.
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright 2017 Luxul Inc.
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2017 Luxul Inc.
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2017 Luxul Inc.
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright 2016 Luxul Inc.
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+- *
+- * Licensed under the ISC license.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+@@ -1,9 +1,8 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
+- *
+- * Licensed under the ISC license.
+ */
+
+ #include "bcm5301x-nand-cs0.dtsi"
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+@@ -1,7 +1,6 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Copyright 2016 Luxul Inc.
+- *
+- * Licensed under the ISC license.
+ */
+
+ #include "bcm5301x-nand-cs0.dtsi"
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+@@ -1,3 +1,4 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X Nand chip defaults.
+ *
+@@ -5,8 +6,6 @@
+ * and uses 8 bit ECC.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ #include "bcm5301x-nand-cs0.dtsi"
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+@@ -1,9 +1,8 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ / {
--- /dev/null
+From fd0ab539d185a828f2071ee5f311bf101c7fea08 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 4 May 2018 11:54:45 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ /
+ MIT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This matches licensing used by other BCM5301X files and is preferred as:
+1) GPL 2.0+ makes is clearly compatible with Linux kernel
+2) MIT is also permissive but preferred over ISC
+
+These files were created and ever touched by a group of four people
+only: Felix, INAGAKI, Hauke and me.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Acked-by: Felix Fietkau <nbd@nbd.name>
+Acked-by: INAGAKI Hiroshi <musashino.open@gmail.com>
+Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 +--
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 13 +------------
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 +--
+ 3 files changed, 3 insertions(+), 16 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -1,10 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1750DHP
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-900DHP
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -1,10 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WXR-1900DHP
+ *
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+- *
+- * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+ /dts-v1/;
--- /dev/null
+From 2e2105a1578172eaf61e3b59a2c10c4fe04c21b9 Mon Sep 17 00:00:00 2001
+From: Dan Haab <riproute@gmail.com>
+Date: Fri, 4 May 2018 10:08:43 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
+1) It has more RAM
+2) Its NAND controller in running in BCH8 mode
+3) LAN ports LEDs are hardware controlled
+
+Signed-off-by: Dan Haab <dan.haab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++
+ 2 files changed, 78 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm47094-luxul-abr-4500.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
++ bcm47094-luxul-xwr-3150-v1.dtb \
+ bcm47094-netgear-r8500.dtb \
+ bcm94708.dtb \
+ bcm94709.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+@@ -0,0 +1,77 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright 2018 Luxul Inc.
++ */
++
++/dts-v1/;
++
++#include "bcm47094.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
++ model = "Luxul XWR-3150 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ power {
++ label = "bcm53xx:green:power";
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-on";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++
++ 2ghz {
++ label = "bcm53xx:green:2ghz";
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ };
++
++ 5ghz {
++ label = "bcm53xx:green:5ghz";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++};
++
++&spi_nor {
++ status = "okay";
++};
--- /dev/null
+From 6054cb5788072e214af582c42d9bd8c5ffa6e288 Mon Sep 17 00:00:00 2001
+From: Dan Haab <riproute@gmail.com>
+Date: Fri, 4 May 2018 10:08:44 -0600
+Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's an access point based on BCM47094 SoC with two BCM4366E wireless
+chipsets.
+
+Signed-off-by: Dan Haab <dan.haab@luxul.com>
+Acked-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++++++++++++++++++
+ 2 files changed, 58 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm47094-dlink-dir-885l.dtb \
+ bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
++ bcm47094-luxul-xap-1610.dtb \
+ bcm47094-luxul-xbr-4500.dtb \
+ bcm47094-luxul-xwr-3100.dtb \
+ bcm47094-luxul-xwr-3150-v1.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+@@ -0,0 +1,57 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright 2018 Luxul Inc.
++ */
++
++/dts-v1/;
++
++#include "bcm47094.dtsi"
++
++/ {
++ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
++ model = "Luxul XAP-1610 V1";
++
++ chosen {
++ bootargs = "earlycon";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ status {
++ label = "bcm53xx:green:status";
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "timer";
++ };
++
++ 2ghz {
++ label = "bcm53xx:blue:2ghz";
++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
++ };
++
++ 5ghz {
++ label = "bcm53xx:blue:5ghz";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&spi_nor {
++ status = "okay";
++};
--- /dev/null
+From 9c281b5e129961b9940a27f8da24dddd1c0eba87 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Fri, 4 May 2018 12:03:24 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL
+ 2.0+ / MIT
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This matches licensing used by other BCM5301X files and is preferred as:
+1) GPL 2.0+ makes is clearly compatible with Linux kernel
+2) MIT is also permissive but preferred over ISC
+
+This file were created and ever touched by a group of three people only:
+Álvaro, Hauke and me.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
+Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 13 +------------
+ 1 file changed, 1 insertion(+), 12 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -1,20 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ /*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC87U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+- *
+- * Permission to use, copy, modify, and/or distribute this software for any
+- * purpose with or without fee is hereby granted, provided that the above
+- * copyright notice and this permission notice appear in all copies.
+- *
+- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+- * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+ /dts-v1/;
--- /dev/null
+From a05f1e36a57d02374a203719abc5bf2e8c51e125 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 10 May 2018 23:20:00 +0200
+Subject: [PATCH] ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new
+ partitions syntax
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This new syntax is slightly better designed & uses "compatible" string.
+For details see Documentation/devicetree/bindings/mtd/partition.txt .
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 +++++++++---
+ 1 file changed, 9 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -26,9 +26,15 @@
+
+ nand: nand@18028000 {
+ nandcs@0 {
+- partition@0 {
+- label = "firmware";
+- reg = <0x00000000 0x08000000>;
++ partitions {
++ compatible = "fixed-partitions";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ partition@0 {
++ label = "firmware";
++ reg = <0x00000000 0x08000000>;
++ };
+ };
+ };
+ };
--- /dev/null
+From 37f6130ec39fe14e923d472746a51e6f06f761b7 Mon Sep 17 00:00:00 2001
+From: Vivek Unune <npcomplete13@gmail.com>
+Date: Mon, 9 Apr 2018 18:31:53 -0400
+Subject: [PATCH] ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which
+requires register range "ccb-mii" <0x18003000 0x1000>. This range
+overlaps with MDIO cmd and param registers (<0x18003000 0x8>).
+Essentially, the platform driver partly acts like a MDIO bus driver,
+hence to use of this register range.
+
+In some Northstar devices like Linksys EA9500, secondary switch is
+connected via external MDIO. The only way to access and configure the
+external switch is via MDIO bus. When we enable the MDIO bus in it's
+current state, the MDIO bus and any child buses fail to register because
+of the register range overlap.
+
+On Northstar, the USB 3.0 PHY is connected at address 0x10 on the
+internal MDIO bus. This change moves the usb3_phy node and makes it a
+child node of internal MDIO bus.
+
+Thanks to Rafał Miłecki's commit af850e14a7ae ("phy: bcm-ns-usb3: add
+MDIO driver using proper bus layer") the same USB 3.0 platform driver
+can now act as USB 3.0 PHY MDIO driver.
+
+Tested on Linksys Panamera (EA9500)
+
+Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 +++
+ arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 +++
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 +++
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 +++
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 +++
+ arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 4 +++
+ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 4 +++
+ arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 +++
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 +++
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 +++
+ arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 +++
+ arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 +++
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 +++
+ arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 +++
+ arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 +++
+ arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 4 +++
+ arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +++
+ arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +++
+ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 +++
+ arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 +++
+ arch/arm/boot/dts/bcm47094.dtsi | 7 +++--
+ arch/arm/boot/dts/bcm5301x.dtsi | 35 +++++++++++++++++-----
+ arch/arm/boot/dts/bcm94708.dts | 4 +++
+ arch/arm/boot/dts/bcm94709.dts | 4 +++
+ arch/arm/boot/dts/bcm953012er.dts | 4 +++
+ arch/arm/boot/dts/bcm953012hr.dts | 4 +++
+ arch/arm/boot/dts/bcm953012k.dts | 4 +++
+ 34 files changed, 159 insertions(+), 11 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -90,3 +90,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -80,3 +80,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -146,3 +146,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -38,3 +38,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+@@ -57,3 +57,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -64,3 +64,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -91,3 +91,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -83,3 +83,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -158,3 +158,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -74,3 +74,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -118,3 +118,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -104,3 +104,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+@@ -57,3 +57,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+@@ -105,3 +105,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+@@ -99,3 +99,7 @@
+ &usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -62,3 +62,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -127,3 +127,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+@@ -39,3 +39,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -101,3 +101,7 @@
+ &usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -182,3 +182,7 @@
+ &usb3 {
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+@@ -104,3 +104,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+@@ -115,3 +115,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -33,3 +33,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+@@ -60,3 +60,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+@@ -60,3 +60,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+@@ -100,3 +100,7 @@
+ &spi_nor {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+@@ -91,3 +91,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47094.dtsi
++++ b/arch/arm/boot/dts/bcm47094.dtsi
+@@ -7,9 +7,10 @@
+ #include "bcm4708.dtsi"
+
+ / {
+- usb3_phy: usb3-phy {
+- compatible = "brcm,ns-bx-usb3-phy";
+- };
++};
++
++&usb3_phy {
++ compatible = "brcm,ns-bx-usb3-phy";
+ };
+
+ &uart0 {
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -154,13 +154,6 @@
+ clock-names = "phy-ref-clk";
+ };
+
+- usb3_phy: usb3-phy {
+- compatible = "brcm,ns-ax-usb3-phy";
+- reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+- reg-names = "dmp", "ccb-mii";
+- #phy-cells = <0>;
+- };
+-
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+@@ -359,7 +352,33 @@
+ reg = <0x18003000 0x8>;
+ #size-cells = <1>;
+ #address-cells = <0>;
+- status = "disabled";
++ };
++
++ mdio-bus-mux {
++ compatible = "mdio-mux-mmioreg";
++ mdio-parent-bus = <&mdio>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x18003000 0x4>;
++ mux-mask = <0x200>;
++
++ mdio@0 {
++ reg = <0x0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ usb3_phy: usb3-phy@10 {
++ compatible = "brcm,ns-ax-usb3-phy";
++ reg = <0x10>;
++ usb3-dmp-syscon = <&usb3_dmp>;
++ #phy-cells = <0>;
++ status = "disabled";
++ };
++ };
++ };
++
++ usb3_dmp: syscon@18105000 {
++ reg = <0x18105000 0x1000>;
+ };
+
+ i2c0: i2c@18009000 {
+--- a/arch/arm/boot/dts/bcm94708.dts
++++ b/arch/arm/boot/dts/bcm94708.dts
+@@ -42,3 +42,7 @@
+ reg = <0x00000000 0x08000000>;
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm94709.dts
++++ b/arch/arm/boot/dts/bcm94709.dts
+@@ -42,3 +42,7 @@
+ reg = <0x00000000 0x08000000>;
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm953012er.dts
++++ b/arch/arm/boot/dts/bcm953012er.dts
+@@ -90,3 +90,7 @@
+ };
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm953012hr.dts
++++ b/arch/arm/boot/dts/bcm953012hr.dts
+@@ -95,3 +95,7 @@
+ reg = <0x00700000 0x00900000>;
+ };
+ };
++
++&usb3_phy {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm953012k.dts
++++ b/arch/arm/boot/dts/bcm953012k.dts
+@@ -113,3 +113,7 @@
+ &uart1 {
+ status = "okay";
+ };
++
++&usb3_phy {
++ status = "okay";
++};
--- /dev/null
+From a21e7548438f3a8f59f9b9f3a8bc973613d3726a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 14 Jun 2018 18:41:47 +0200
+Subject: [PATCH] ARM: dts: BCM53573: Add architected timer
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's a standard ARM architected timer that was simply missed when
+initially adding this .dtsi file.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm53573.dtsi | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm53573.dtsi
++++ b/arch/arm/boot/dts/bcm53573.dtsi
+@@ -48,6 +48,14 @@
+ };
+ };
+
++ timer {
++ compatible = "arm,armv7-timer";
++ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
++ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
++ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
++ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
++ };
++
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
--- /dev/null
+From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001
+From: Vivek Unune <npcomplete13@gmail.com>
+Date: Mon, 18 Jun 2018 13:41:59 -0400
+Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Hardware Info
+-------------
+
+Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
+Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125
+DDR3 RAM - 256 MB
+Flash - 128 MB (Toshiba TC58BVG0S3HTA00)
+2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
+Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4)
+5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
+Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch
+Ports - 8 Ports, 1 WAN Ports
+Antennas - 8 Antennas
+Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1
+
+Tested with OpenWrt built with DSA driver and Kernel v4.14
+
+Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++
+ 1 file changed, 229 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+@@ -31,6 +31,235 @@
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ };
++
++ rfkill {
++ label = "WiFi";
++ linux,code = <KEY_RFKILL>;
++ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
++ };
++
++ reset {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ wps {
++ label = "bcm53xx:white:wps";
++ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
++ };
++
++ usb2 {
++ label = "bcm53xx:green:usb2";
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port2>, <&ehci_port2>;
++ linux,default-trigger = "usbport";
++ };
++
++ usb3 {
++ label = "bcm53xx:green:usb3";
++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
++ trigger-sources = <&ohci_port1>, <&ehci_port1>,
++ <&xhci_port1>;
++ linux,default-trigger = "usbport";
++ };
++
++ power {
++ label = "bcm53xx:white:power";
++ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
++ };
++
++ wifi-disabled {
++ label = "bcm53xx:amber:wifi-disabled";
++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
++ };
++
++ wifi-enabled {
++ label = "bcm53xx:white:wifi-enabled";
++ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar1 {
++ label = "bcm53xx:white:bluebar1";
++ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar2 {
++ label = "bcm53xx:white:bluebar2";
++ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar3 {
++ label = "bcm53xx:white:bluebar3";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
++ };
++
++ bluebar4 {
++ label = "bcm53xx:white:bluebar4";
++ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar5 {
++ label = "bcm53xx:white:bluebar5";
++ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar6 {
++ label = "bcm53xx:white:bluebar6";
++ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar7 {
++ label = "bcm53xx:white:bluebar7";
++ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
++ };
++
++ bluebar8 {
++ label = "bcm53xx:white:bluebar8";
++ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ mdio-bus-mux {
++ /* BIT(9) = 1 => external mdio */
++ mdio_ext: mdio@200 {
++ reg = <0x200>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++ };
++
++ mdio-mii-mux {
++ compatible = "mdio-mux-mmioreg";
++ mdio-parent-bus = <&mdio_ext>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x1800c1c0 0x4>;
++
++ /* BIT(6) = mdc, BIT(7) = mdio */
++ mux-mask = <0xc0>;
++
++ mdio-mii@0 {
++ /* Enable MII function */
++ reg = <0x0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ switch@0 {
++ compatible = "brcm,bcm53125";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ reset-names = "robo_reset";
++ reg = <0>;
++ dsa,member = <1 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan1";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan5";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan2";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan6";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan3";
++ };
++
++ sw1_p8: port@8 {
++ reg = <8>;
++ ethernet = <&sw0_p0>;
++ label = "cpu";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++ };
++ };
++};
++
++&usb2 {
++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++};
++
++&usb3 {
++ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
++};
++
++&srab {
++ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
++ status = "okay";
++ dsa,member = <0 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@1 {
++ reg = <1>;
++ label = "lan7";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan4";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan8";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "wan";
++ };
++
++ port@8 {
++ reg = <8>;
++ ethernet = <&gmac2>;
++ label = "cpu";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ sw0_p0: port@0 {
++ reg = <0>;
++ label = "extsw";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
+ };
+ };
+
+++ /dev/null
-From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 6 Oct 2017 10:52:35 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul
- XWR-1200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This info can be used by operating system to setup LED behavior.
-
-Reported-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -57,7 +57,8 @@
- usb {
- label = "bcm53xx:green:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "none";
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- status {
+++ /dev/null
-From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:22 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
-board design.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-linksys-panamera.dtb \
-+ bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (C) 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XBR-4500 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
+++ /dev/null
-From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:23 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
-board design.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-linksys-panamera.dtb \
-+ bcm47094-luxul-abr-4500.dtb \
- bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (C) 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul ABR-4500 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
+++ /dev/null
-From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:59 -0600
-Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
-used for 2.4 GHz.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++
- 2 files changed, 88 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-luxul-xap-810.dtb \
- bcm47189-tenda-ac9.dtb \
- bcm947189acdbmr.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -0,0 +1,87 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Luxul XAP-810 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:green:system";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ pcie0_leds {
-+ compatible = "gpio-leds";
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&pcie0 {
-+ ranges = <0x00000000 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ pcie0_chipcommon: chipcommon@0 {
-+ reg = <0 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
-+ };
-+};
+++ /dev/null
-From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:47:00 -0600
-Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
-chipset used for 2.4 GHz.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++
- 2 files changed, 51 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-luxul-xap-1440.dtb \
- bcm47189-luxul-xap-810.dtb \
- bcm47189-tenda-ac9.dtb \
- bcm947189acdbmr.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -0,0 +1,50 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Luxul XAP-1440 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ wlan {
-+ label = "bcm53xx:blue:wlan";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:green:system";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
+++ /dev/null
-From 811ae58e76da88106f6d28159d4ea7b163dfaa48 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Wed, 7 Mar 2018 20:33:56 +0900
-Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
-dts and cannot configure these LEDs.
-I Added missing LED definitions for WZR-900DHP.
-
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -35,6 +35,74 @@
- 0x88000000 0x08000000>;
- };
-
-+ spi {
-+ compatible = "spi-gpio";
-+ num-chipselects = <1>;
-+ gpio-sck = <&chipcommon 7 0>;
-+ gpio-mosi = <&chipcommon 4 0>;
-+ cs-gpios = <&chipcommon 6 0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hc595: gpio_spi@0 {
-+ compatible = "fairchild,74hc595";
-+ reg = <0>;
-+ registers-number = <1>;
-+ spi-max-frequency = <100000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ usb {
-+ label = "bcm53xx:green:usb";
-+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power0 {
-+ label = "bcm53xx:green:power";
-+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:red:power";
-+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ router0 {
-+ label = "bcm53xx:green:router";
-+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ router1 {
-+ label = "bcm53xx:amber:router";
-+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wireless0 {
-+ label = "bcm53xx:green:wireless";
-+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wireless1 {
-+ label = "bcm53xx:amber:wireless";
-+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
+++ /dev/null
-From 0c0d1c90ddc44df70401b7cfff178c41b2f83ffa Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 4 Apr 2018 15:14:21 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed
- partitions syntax
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This new syntax is slightly better designed & uses "compatible" string.
-For details see Documentation/devicetree/bindings/mtd/partition.txt .
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -26,9 +26,15 @@
-
- nand: nand@18028000 {
- nandcs@0 {
-- partition@0 {
-- label = "ubi";
-- reg = <0x00000000 0x08000000>;
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "ubi";
-+ reg = <0x00000000 0x08000000>;
-+ };
- };
- };
- };
+++ /dev/null
-From 2b3db67ce4bc4d1d8556e87a17df7765da8dbdc5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 2 May 2018 16:11:02 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+
- / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-These files were created and ever touched by a group of three people
-only: Dan, Hauke and me. They were licensed under GNU/GPL or ISC.
-
-Introducing and discussing SPDX-License-Identifier resulted in a
-conclusion that ISC is a not recommended license (see also a
-license-rules.rst). Moveover an old e-mail from Alan Cox was pointed
-which explained that dual licensing is a safer solution than depending
-on a common compatibility belief.
-
-This commit switches most of BCM5301X DTS files to dual licensing using:
-1) GPL 2.0+ to make sure they are compatible with Linux kernel
-2) MIT to allow sharing with more permissive projects
-Both licenses belong to the preferred ones (see LICENSES/preferred/).
-
-An attempt to relicense remaining files will be made separately and will
-require approve from more/other developers.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Dan Haab <dan.haab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 13 +------------
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 13 +------------
- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 3 +--
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 3 +--
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 +--
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 13 +------------
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 +--
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 13 +------------
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 13 +------------
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 +--
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 +--
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 3 +--
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 3 +--
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 13 +------------
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 3 +--
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 13 +------------
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 3 +--
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 3 +--
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 3 +--
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +--
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 3 +--
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 3 +--
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 3 +--
- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 3 +--
- 25 files changed, 25 insertions(+), 120 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC56U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC68U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright 2016 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -1,10 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Luxul XWC-1000
- *
- * Copyright 2014 Luxul Inc.
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R6300 V2
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -1,10 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for SmartRG SR400ac
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-N18U
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-600DHP2
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R7000
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for D-Link DIR-885L
- *
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright 2016 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
-@@ -1,9 +1,8 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom Northstar NAND.
- *
- * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
-- *
-- * Licensed under the ISC license.
- */
-
- #include "bcm5301x-nand-cs0.dtsi"
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright 2016 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- #include "bcm5301x-nand-cs0.dtsi"
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
-@@ -1,3 +1,4 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X Nand chip defaults.
- *
-@@ -5,8 +6,6 @@
- * and uses 8 bit ECC.
- *
- * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
- #include "bcm5301x-nand-cs0.dtsi"
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -1,9 +1,8 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom Northstar NAND.
- *
- * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
- / {
+++ /dev/null
-From fd0ab539d185a828f2071ee5f311bf101c7fea08 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 4 May 2018 11:54:45 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM5301X files and is preferred as:
-1) GPL 2.0+ makes is clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-These files were created and ever touched by a group of four people
-only: Felix, INAGAKI, Hauke and me.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Felix Fietkau <nbd@nbd.name>
-Acked-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 +--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 13 +------------
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 +--
- 3 files changed, 3 insertions(+), 16 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -1,10 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-1750DHP
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WZR-900DHP
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -1,10 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Buffalo WXR-1900DHP
- *
- * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
-- *
-- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
- /dts-v1/;
+++ /dev/null
-From 2e2105a1578172eaf61e3b59a2c10c4fe04c21b9 Mon Sep 17 00:00:00 2001
-From: Dan Haab <riproute@gmail.com>
-Date: Fri, 4 May 2018 10:08:43 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
-1) It has more RAM
-2) Its NAND controller in running in BCH8 mode
-3) LAN ports LEDs are hardware controlled
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++
- 2 files changed, 78 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-luxul-abr-4500.dtb \
- bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
-+ bcm47094-luxul-xwr-3150-v1.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -0,0 +1,77 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2018 Luxul Inc.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XWR-3150 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:green:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:green:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
+++ /dev/null
-From 6054cb5788072e214af582c42d9bd8c5ffa6e288 Mon Sep 17 00:00:00 2001
-From: Dan Haab <riproute@gmail.com>
-Date: Fri, 4 May 2018 10:08:44 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's an access point based on BCM47094 SoC with two BCM4366E wireless
-chipsets.
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 57 +++++++++++++++++++++++++++
- 2 files changed, 58 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-linksys-panamera.dtb \
- bcm47094-luxul-abr-4500.dtb \
-+ bcm47094-luxul-xap-1610.dtb \
- bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-luxul-xwr-3150-v1.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -0,0 +1,57 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2018 Luxul Inc.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XAP-1610 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
+++ /dev/null
-From 9c281b5e129961b9940a27f8da24dddd1c0eba87 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 4 May 2018 12:03:24 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL
- 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM5301X files and is preferred as:
-1) GPL 2.0+ makes is clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-This file were created and ever touched by a group of three people only:
-Álvaro, Hauke and me.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 13 +------------
- 1 file changed, 1 insertion(+), 12 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Asus RT-AC87U
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
+++ /dev/null
-From a05f1e36a57d02374a203719abc5bf2e8c51e125 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 10 May 2018 23:20:00 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new
- partitions syntax
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This new syntax is slightly better designed & uses "compatible" string.
-For details see Documentation/devicetree/bindings/mtd/partition.txt .
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -26,9 +26,15 @@
-
- nand: nand@18028000 {
- nandcs@0 {
-- partition@0 {
-- label = "firmware";
-- reg = <0x00000000 0x08000000>;
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "firmware";
-+ reg = <0x00000000 0x08000000>;
-+ };
- };
- };
- };
+++ /dev/null
-From 37f6130ec39fe14e923d472746a51e6f06f761b7 Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Mon, 9 Apr 2018 18:31:53 -0400
-Subject: [PATCH] ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently, the USB 3.0 PHY in bcm5301x.dtsi uses platform driver which
-requires register range "ccb-mii" <0x18003000 0x1000>. This range
-overlaps with MDIO cmd and param registers (<0x18003000 0x8>).
-Essentially, the platform driver partly acts like a MDIO bus driver,
-hence to use of this register range.
-
-In some Northstar devices like Linksys EA9500, secondary switch is
-connected via external MDIO. The only way to access and configure the
-external switch is via MDIO bus. When we enable the MDIO bus in it's
-current state, the MDIO bus and any child buses fail to register because
-of the register range overlap.
-
-On Northstar, the USB 3.0 PHY is connected at address 0x10 on the
-internal MDIO bus. This change moves the usb3_phy node and makes it a
-child node of internal MDIO bus.
-
-Thanks to Rafał Miłecki's commit af850e14a7ae ("phy: bcm-ns-usb3: add
-MDIO driver using proper bus layer") the same USB 3.0 platform driver
-can now act as USB 3.0 PHY MDIO driver.
-
-Tested on Linksys Panamera (EA9500)
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 +++
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 +++
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 +++
- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 4 +++
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 +++
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 +++
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 +++
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 +++
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 +++
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 +++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 +++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 +++
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 4 +++
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 4 +++
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 +++
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 +++
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 +++
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 +++
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 +++
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 +++
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 +++
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 +++
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 4 +++
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +++
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 +++
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 +++
- arch/arm/boot/dts/bcm47094.dtsi | 7 +++--
- arch/arm/boot/dts/bcm5301x.dtsi | 35 +++++++++++++++++-----
- arch/arm/boot/dts/bcm94708.dts | 4 +++
- arch/arm/boot/dts/bcm94709.dts | 4 +++
- arch/arm/boot/dts/bcm953012er.dts | 4 +++
- arch/arm/boot/dts/bcm953012hr.dts | 4 +++
- arch/arm/boot/dts/bcm953012k.dts | 4 +++
- 34 files changed, 159 insertions(+), 11 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -90,3 +90,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -80,3 +80,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -146,3 +146,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -38,3 +38,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -57,3 +57,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -64,3 +64,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -91,3 +91,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -83,3 +83,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -158,3 +158,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -74,3 +74,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -118,3 +118,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -104,3 +104,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -57,3 +57,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -105,3 +105,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -99,3 +99,7 @@
- &usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -62,3 +62,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -127,3 +127,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -39,3 +39,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -101,3 +101,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -182,3 +182,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -104,3 +104,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -115,3 +115,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -33,3 +33,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -60,3 +60,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -60,3 +60,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -100,3 +100,7 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -91,3 +91,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -7,9 +7,10 @@
- #include "bcm4708.dtsi"
-
- / {
-- usb3_phy: usb3-phy {
-- compatible = "brcm,ns-bx-usb3-phy";
-- };
-+};
-+
-+&usb3_phy {
-+ compatible = "brcm,ns-bx-usb3-phy";
- };
-
- &uart0 {
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -154,13 +154,6 @@
- clock-names = "phy-ref-clk";
- };
-
-- usb3_phy: usb3-phy {
-- compatible = "brcm,ns-ax-usb3-phy";
-- reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
-- reg-names = "dmp", "ccb-mii";
-- #phy-cells = <0>;
-- };
--
- axi@18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
-@@ -359,7 +352,33 @@
- reg = <0x18003000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
-- status = "disabled";
-+ };
-+
-+ mdio-bus-mux {
-+ compatible = "mdio-mux-mmioreg";
-+ mdio-parent-bus = <&mdio>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x18003000 0x4>;
-+ mux-mask = <0x200>;
-+
-+ mdio@0 {
-+ reg = <0x0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ usb3_phy: usb3-phy@10 {
-+ compatible = "brcm,ns-ax-usb3-phy";
-+ reg = <0x10>;
-+ usb3-dmp-syscon = <&usb3_dmp>;
-+ #phy-cells = <0>;
-+ status = "disabled";
-+ };
-+ };
-+ };
-+
-+ usb3_dmp: syscon@18105000 {
-+ reg = <0x18105000 0x1000>;
- };
-
- i2c0: i2c@18009000 {
---- a/arch/arm/boot/dts/bcm94708.dts
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -42,3 +42,7 @@
- reg = <0x00000000 0x08000000>;
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm94709.dts
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -42,3 +42,7 @@
- reg = <0x00000000 0x08000000>;
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -90,3 +90,7 @@
- };
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm953012hr.dts
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -95,3 +95,7 @@
- reg = <0x00700000 0x00900000>;
- };
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -113,3 +113,7 @@
- &uart1 {
- status = "okay";
- };
-+
-+&usb3_phy {
-+ status = "okay";
-+};
+++ /dev/null
-From a21e7548438f3a8f59f9b9f3a8bc973613d3726a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 14 Jun 2018 18:41:47 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Add architected timer
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a standard ARM architected timer that was simply missed when
-initially adding this .dtsi file.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -48,6 +48,14 @@
- };
- };
-
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+ };
-+
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
+++ /dev/null
-From 2bebdfcdcd0feb58d5df419532a2cedc78a336d7 Mon Sep 17 00:00:00 2001
-From: Vivek Unune <npcomplete13@gmail.com>
-Date: Mon, 18 Jun 2018 13:41:59 -0400
-Subject: [PATCH] ARM: dts: BCM5301X: Add support for Linksys EA9500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Hardware Info
--------------
-
-Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
-Switch - BCM53012 in BCM4709C0KFEBG & external BCM53125
-DDR3 RAM - 256 MB
-Flash - 128 MB (Toshiba TC58BVG0S3HTA00)
-2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
-Power Amp - Skyworks SE2623L 2.4 GHz power amp (x4)
-5GHz x 2 - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
-Power Amp - PLX Technology PEX8603 3-lane, 3-port PCIe switch
-Ports - 8 Ports, 1 WAN Ports
-Antennas - 8 Antennas
-Serial Port - @J6 [GND,TX,RX] (VCC NC) 115200 8n1
-
-Tested with OpenWrt built with DSA driver and Kernel v4.14
-
-Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 229 ++++++++++++++++++++++++
- 1 file changed, 229 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -31,6 +31,235 @@
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- };
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ reset {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ wps {
-+ label = "bcm53xx:white:wps";
-+ gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:green:usb2";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ power {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wifi-disabled {
-+ label = "bcm53xx:amber:wifi-disabled";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wifi-enabled {
-+ label = "bcm53xx:white:wifi-enabled";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ bluebar1 {
-+ label = "bcm53xx:white:bluebar1";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ bluebar2 {
-+ label = "bcm53xx:white:bluebar2";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ bluebar3 {
-+ label = "bcm53xx:white:bluebar3";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ bluebar4 {
-+ label = "bcm53xx:white:bluebar4";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ bluebar5 {
-+ label = "bcm53xx:white:bluebar5";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ bluebar6 {
-+ label = "bcm53xx:white:bluebar6";
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ bluebar7 {
-+ label = "bcm53xx:white:bluebar7";
-+ gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ bluebar8 {
-+ label = "bcm53xx:white:bluebar8";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ mdio-bus-mux {
-+ /* BIT(9) = 1 => external mdio */
-+ mdio_ext: mdio@200 {
-+ reg = <0x200>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+ };
-+
-+ mdio-mii-mux {
-+ compatible = "mdio-mux-mmioreg";
-+ mdio-parent-bus = <&mdio_ext>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x1800c1c0 0x4>;
-+
-+ /* BIT(6) = mdc, BIT(7) = mdio */
-+ mux-mask = <0xc0>;
-+
-+ mdio-mii@0 {
-+ /* Enable MII function */
-+ reg = <0x0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ switch@0 {
-+ compatible = "brcm,bcm53125";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ reset-names = "robo_reset";
-+ reg = <0>;
-+ dsa,member = <1 0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan1";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan5";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan6";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "lan3";
-+ };
-+
-+ sw1_p8: port@8 {
-+ reg = <8>;
-+ ethernet = <&sw0_p0>;
-+ label = "cpu";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&srab {
-+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+ status = "okay";
-+ dsa,member = <0 0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan7";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan4";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan8";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "wan";
-+ };
-+
-+ port@8 {
-+ reg = <8>;
-+ ethernet = <&gmac2>;
-+ label = "cpu";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ sw0_p0: port@0 {
-+ reg = <0>;
-+ label = "extsw";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
- };
- };
-
projects / openwrt / staging / jogo.git / commitdiff