openwrt/staging/ldir.git
9 months agofw3: permit default timeout of 0 staging
Kevin Darbyshire-Bryant [Sat, 14 Aug 2021 06:18:11 +0000 (07:18 +0100)]
fw3: permit default timeout of 0

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
9 months agoethtool: fix recursive dep error
Kevin Darbyshire-Bryant [Sat, 7 Aug 2021 06:40:30 +0000 (15:40 +0900)]
ethtool: fix recursive dep error

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
9 months ago6in4: delete tunnel on interface teardown
Ansuel Smith [Mon, 2 Aug 2021 11:41:21 +0000 (13:41 +0200)]
6in4: delete tunnel on interface teardown

Delete tunnel on 6in4 interface teardown.
Should solve problem related to tunnel stuck on restart loop
with "Unknown Command" on tunnel restart due to wan connection drop.
Fixes: FS#3690
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
9 months agohostapd: fix broken check in radar detection notification
Felix Fietkau [Wed, 11 Aug 2021 17:00:22 +0000 (19:00 +0200)]
hostapd: fix broken check in radar detection notification

This check was accidentally left in after reworking the code,
causing a segfault

Signed-off-by: Felix Fietkau <nbd@nbd.name>
9 months agogeneric: add missing config symbol
David Bauer [Wed, 11 Aug 2021 00:11:17 +0000 (02:11 +0200)]
generic: add missing config symbol

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agomediatek: add missing config symbol
David Bauer [Wed, 11 Aug 2021 00:09:25 +0000 (02:09 +0200)]
mediatek: add missing config symbol

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agotreewide: add various missing config symbols
David Bauer [Tue, 10 Aug 2021 18:22:18 +0000 (20:22 +0200)]
treewide: add various missing config symbols

Fixes commit 91a52f22a13d ("treewide: backport support for nvmem on non platform devices")

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agogeneric: Kconfig: exit on unset symbol
David Bauer [Thu, 22 Jul 2021 23:32:38 +0000 (01:32 +0200)]
generic: Kconfig: exit on unset symbol

When a target configuration has unser Kconfig symbols, the build will
fail when OpenWrt is compiled with V=s and stdin is connected to a tty.

In case OpenWrt is compiled without either of these preconditions, the
build will uscceed with the symbols in question being unset.

Modify the kernel configuration in a way it fails on unset symbols
regardless of the aformentioned preconditions.

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agogeneric: fix kernel panic on existing mac-address node
David Bauer [Mon, 9 Aug 2021 22:28:01 +0000 (00:28 +0200)]
generic: fix kernel panic on existing mac-address node

Calling free for the OF property can result in a kernel panic, as the
buffer in question might be referenced elsewhere. Also, it is not
removed from the tree.

Always allocate a new property and updating the tree with it fixes both
issues.

Fixes commit 91a52f22a13d ("treewide: backport support for nvmem on non platform devices")

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agofirmware-utils: nand_ecc: replace GPL boilerplate with SPDX
Rafał Miłecki [Fri, 6 Aug 2021 10:59:23 +0000 (12:59 +0200)]
firmware-utils: nand_ecc: replace GPL boilerplate with SPDX

Cc: yajin <yajin@vm-kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofirmware-utils: trx: replace GPL-2.0-or-later boilerplate with SPDX
Rafał Miłecki [Fri, 6 Aug 2021 10:59:22 +0000 (12:59 +0200)]
firmware-utils: trx: replace GPL-2.0-or-later boilerplate with SPDX

This was missed because scancode license scanner was confused by
comments about crc32buf().

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofirmware-utils: osbridge-crc: replace GPL-2.0-only boilerplate with SPDX
Rafał Miłecki [Fri, 6 Aug 2021 10:59:21 +0000 (12:59 +0200)]
firmware-utils: osbridge-crc: replace GPL-2.0-only boilerplate with SPDX

This was missed because scancode license scanner was confused by
comments about crc32buf().

Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Gabor Juhos <juhosg@freemail.hu>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofirmware-utils: mkmylofw: replace GPL-2.0-or-later boilerplate with SPDX
Rafał Miłecki [Fri, 6 Aug 2021 10:59:20 +0000 (12:59 +0200)]
firmware-utils: mkmylofw: replace GPL-2.0-or-later boilerplate with SPDX

This was missed because scancode license scanner was confused by a
comment about (no) copyrights in the init_crc_table().

Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Gabor Juhos <juhosg@freemail.hu>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofirmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX
Rafał Miłecki [Fri, 6 Aug 2021 10:59:19 +0000 (12:59 +0200)]
firmware-utils: mkmerakifw-old: replace GPL-2.0-only boilerplate with SPDX

This was missed because scancode license scanner was confused by a
comment about Cisco's GPL code github repository.

Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
9 months agoomap: Remove EXT2 and EXT3 driver config
Hauke Mehrtens [Sun, 8 Aug 2021 23:13:05 +0000 (01:13 +0200)]
omap: Remove EXT2 and EXT3 driver config

The EXT4 driver also takes care of EXT2 and EXT3 file systems.
Activating the EXT2 driver kernel config options unlocked some other
ext2 driver related options which OpenWrt did not take care of.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
9 months agouboot-layerscape: fix dtc compilation on host gcc 10
Hauke Mehrtens [Sun, 8 Aug 2021 22:03:43 +0000 (00:03 +0200)]
uboot-layerscape: fix dtc compilation on host gcc 10

Backport a patch from upstream U-Boot to fix the compile with host GCC 10.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
9 months agolayerscape: Fix multiple bugs in of_get_mac_address() changes
Hauke Mehrtens [Sun, 8 Aug 2021 20:50:27 +0000 (22:50 +0200)]
layerscape: Fix multiple bugs in of_get_mac_address() changes

The change which backported the of_get_mac_address() change broke some
patches in the layerscape target so the patches did not apply any more.

This commit makes them apply again and also fixes some other problems
related to this change.

Fixes commit 91a52f22a13d ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
9 months agokernel: Apply change to of_get_mac_address() to ks8851 too
Hauke Mehrtens [Sun, 8 Aug 2021 20:38:12 +0000 (22:38 +0200)]
kernel: Apply change to of_get_mac_address() to ks8851 too

The code from ks8851.c was moved to ks8851_common.c, so it was not
backported. This broke the compile of the omap target which uses this
driver.

Fixes commit 91a52f22a13d ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
9 months agomvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz
Josef Schlehofer [Tue, 27 Jul 2021 11:20:43 +0000 (13:20 +0200)]
mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz

This patch is backported from linux-arm-kernel [1] to improve situation, when
it was reported that 1.2 GHz variant is unstable with DFS.
It waits to be accepted upstream, however, it waits for Marvell people to respond.

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210630225601.6372-1-kabel@kernel.org/

Fixes: 7b868fe04a89 ("Revert "mvebu: 5.4 fix DVFS caused random boot crashes"")
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
9 months agoRevert "mvebu: 5.10 fix DVFS caused random boot crashes"
Josef Schlehofer [Tue, 27 Jul 2021 11:20:42 +0000 (13:20 +0200)]
Revert "mvebu: 5.10 fix DVFS caused random boot crashes"

Based on the discussion on the mailing list [1], the patch which was
reverted, it reverts only one patch without the subsequent ones.

This leads to the SoC scaling issue not using a CPU parent clock, but
it uses DDR clock. This is done for all variants, and it's wrong because
commits (hacks) that were using the DDR clock are no longer in the mainline kernel.

If someone has stability issues on 1.2 GHz, it should not affect all
routers (1 GHz, 800 MHz) and it should be rather consulted with guys, who are trying to
improve the situation in the kernel and not making the situation worse.

There are two solutions in cases of instability:
a) disable cpufreq
b) underclock it up to 1 GHz

This reverts commit 080a0b74e39d159eecf69c468debec42f28bf4d8.

[1] https://lists.openwrt.org/pipermail/openwrt-devel/2021-June/035702.html

Fixes: d37947681772 ("mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz")
CC: Pali Rohár <pali@kernel.org>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
9 months agopcre: update to 8.45
Rosen Penev [Tue, 13 Jul 2021 20:32:30 +0000 (13:32 -0700)]
pcre: update to 8.45

Switch to AUTORELEASE to avoid manual increments.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agonettle: update to 3.7.3
Rosen Penev [Tue, 13 Jul 2021 20:30:24 +0000 (13:30 -0700)]
nettle: update to 3.7.3

Switch to AUTORELEASE to avoid manual increments.

Refreshed patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agombedtls: update to 2.16.11
Rosen Penev [Tue, 13 Jul 2021 20:27:09 +0000 (13:27 -0700)]
mbedtls: update to 2.16.11

Switched to AUTORELEASE to avoid manual increments.

Release notes:
https://github.com/ARMmbed/mbedtls/releases/tag/v2.16.11

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agolibpcap: update to 1.10.1
Rosen Penev [Tue, 13 Jul 2021 20:24:54 +0000 (13:24 -0700)]
libpcap: update to 1.10.1

Switch to AUTORELEASE to avoid manual increments.

Refreshed patches.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agolibnftnl: update to 1.2.0
Rosen Penev [Tue, 13 Jul 2021 20:19:08 +0000 (13:19 -0700)]
libnftnl: update to 1.2.0

Switch to AUTORELEASE to avoid manual increments.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agolibcap: update to 2.51
Rosen Penev [Tue, 13 Jul 2021 20:16:50 +0000 (13:16 -0700)]
libcap: update to 2.51

Switched to AUTORELEASE to avoid manual increments.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agoelfutils: update to 0.182
Rosen Penev [Sun, 3 Jan 2021 23:18:33 +0000 (15:18 -0800)]
elfutils: update to 0.182

Add --disable-libdebuginfod with remove libcurl dependency.

Remove totally unused host elfutils.

Refreshed and rebased patches.

Also happens to fix compilation with GCC11.

Newer versions of elfutils seem to have some kind of dependency on
obstack.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agogettext-full: disable parallel compilation
Rosen Penev [Mon, 12 Jul 2021 01:00:55 +0000 (18:00 -0700)]
gettext-full: disable parallel compilation

Fails fairly reliably with make -j 12 on a Ryzen 3600.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agoutil-linux: update to 2.37
Rosen Penev [Tue, 13 Jul 2021 20:49:14 +0000 (13:49 -0700)]
util-linux: update to 2.37

Switched to AUTORELEASE to avoid manual increments.

Changed PKG_LICENSE to SPDX format.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
9 months agohostapd: respect fixed channel BW in HE20 mode
Jesus Fernandez Manzano [Tue, 20 Jul 2021 10:13:49 +0000 (12:13 +0200)]
hostapd: respect fixed channel BW in HE20 mode

When using htmode 'HE20' with a radio mode that uses wpa-supplicant
(like mesh or sta), it will default to 40 MHz bw if disable_ht40 is not
set. This commit fixes this behaviour.

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
9 months agolibpcap: add rpcapd as package
Stephan Schmidtmer [Sun, 25 Jul 2021 11:50:53 +0000 (11:50 +0000)]
libpcap: add rpcapd as package

This enables building of rpcapd and adds it as a package.

It is a daemon that allows remote packet capturing from another machine.
E.g. Wireshark can talk to it using the Remote Capture Protocol (RPCAP).
https://www.tcpdump.org/manpages/rpcapd.8.html

Compile and run tested: OpenWrt SNAPSHOT r17190-2801fe6132 on x86/64

Signed-off-by: Stephan Schmidtmer <hurz@gmx.org>
9 months agofritz-tools: fix returning wrong values due to strncmp usage
Daniel Kestrel [Sun, 25 Jul 2021 18:32:05 +0000 (20:32 +0200)]
fritz-tools: fix returning wrong values due to strncmp usage

When having two keys that start with the same characters and the second
key just has one character more nand_tffs_read and tffs_read return the
wrong value for the longer key. This is due to the usage of strncmp in
combination with the length of the shorter key which is usually first in
the list before the longer key and when strncmp matches, the search is
stopped. The problem only occurs when the length of the two keys is
different, not if just the last character is different. The fix is to
use strcmp and as such it will only return the value if the key (name)
and the key to look for (namefilter) have the same value and length. A
sample case returning wrong values is when keys macwlan and macwlan2 are
defined and querying macwlan2 returns the value for macwlan.

Signed-off-by: Daniel Kestrel <kestrel1974@t-online.de>
9 months agoiproute2: bump to 5.13
Ansuel Smith [Tue, 27 Jul 2021 18:13:40 +0000 (20:13 +0200)]
iproute2: bump to 5.13

Drop patch 185-libbpf-add-limits-h merged upstream
Update patch 170-ip_tiny
Update patch 130-no_netem_tpic_dcb...

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
9 months agoiw: enable print wpa ie for scan
Jianhui Zhao [Mon, 2 Aug 2021 07:08:46 +0000 (07:08 +0000)]
iw: enable print wpa ie for scan

This increases the size of the iw_5.9-8fab0c9e-3_mips_24kc.ipk from
41166 to 41942 bytes by 776 bytes.

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
9 months agotoolchain/gcc: bump gcc 11 to 11.2
Rui Salvaterra [Wed, 28 Jul 2021 11:33:09 +0000 (12:33 +0100)]
toolchain/gcc: bump gcc 11 to 11.2

Patches automatically refreshed.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
9 months agolayerscape: armv8_64b: do not disable CONFIG_IP_ADVANCED_ROUTER
Martin Schiller [Tue, 27 Jul 2021 07:10:44 +0000 (09:10 +0200)]
layerscape: armv8_64b: do not disable CONFIG_IP_ADVANCED_ROUTER

This option is needed e.g. to use strongswan for IPSec.

BTW: This was the only target where this option was disabled.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
9 months agogemini: Add hdparm setting
Linus Walleij [Fri, 23 Jul 2021 10:29:27 +0000 (12:29 +0200)]
gemini: Add hdparm setting

This uses "hdparm" (if present) to get the harddisk into low
power mode on NAS set-ups.

Cc: Adrian Schmutzler <mail@adrianschmutzler.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
9 months agomvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz
Josef Schlehofer [Tue, 27 Jul 2021 11:22:31 +0000 (13:22 +0200)]
mvebu: armada-37xx: add patch to forbid cpufreq for 1.2 GHz

This patch is backported from linux-arm-kernel [1] to improve situation, when
it was reported that 1.2 GHz variant is unstable with DFS.
It waits to be accepted upstream, however, it waits for Marvell people to respond.

[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210630225601.6372-1-kabel@kernel.org/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
9 months agoRevert "mvebu: 5.4 fix DVFS caused random boot crashes"
Josef Schlehofer [Tue, 27 Jul 2021 11:22:30 +0000 (13:22 +0200)]
Revert "mvebu: 5.4 fix DVFS caused random boot crashes"

Based on the discussion on the mailing list [1], the patch which was
reverted, it reverts only one patch without the subsequent ones.

This leads to the SoC scaling issue not using a CPU parent clock, but
it uses DDR clock. This is done for all variants, and it's wrong because
commits (hacks) that were using the DDR clock are no longer in the mainline kernel.

If someone has stability issues on 1.2 GHz, it should not affect all
routers (1 GHz, 800 MHz) and it should be rather consulted with guys, who are trying to
improve the situation in the kernel and not making the situation worse.

There are two solutions in cases of instability:
a) disable cpufreq
b) underclock it up to 1 GHz

This reverts commit 080a0b74e39d159eecf69c468debec42f28bf4d8.

[1] https://lists.openwrt.org/pipermail/openwrt-devel/2021-June/035702.html

CC: Pali Rohár <pali@kernel.org>
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
9 months agomvebu: Turris Omnia: use SFP module, if present
Klaus Kudielka [Sat, 27 Feb 2021 11:56:10 +0000 (12:56 +0100)]
mvebu: Turris Omnia: use SFP module, if present

Follow the recommendations stated in the Turris Omnia DTS for eth2:

"In case SFP module is present, U-Boot has to enable the sfp node above,
remove phy-handle property, and add managed = "in-band-status" property."

The boot script is written in a way, that it works for all U-Boot
versions deployed by the vendor so far (2015.10-rc2, 2019.07).

Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
9 months agomvebu: backport Turris Omnia DTS changes to 5.4
Klaus Kudielka [Sat, 17 Jul 2021 17:32:57 +0000 (19:32 +0200)]
mvebu: backport Turris Omnia DTS changes to 5.4

Kernel 5.4 receives a reduced set, just to make the SFP cage work.
While we are at it, move the patches accepted upstream to the 0xx series.

Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
9 months agomvebu: backport Turris Omnia DTS changes to 5.10
Klaus Kudielka [Sat, 17 Jul 2021 17:31:44 +0000 (19:31 +0200)]
mvebu: backport Turris Omnia DTS changes to 5.10

Kernel 5.10 receives the complete set of improvements from 5.11/5.12.
While we are at it, move the patches accepted upstream to the 0xx series.

Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
9 months agoath79: fix the AR7{1,2}00 USB PHY patches
Rui Salvaterra [Thu, 29 Jul 2021 11:01:04 +0000 (12:01 +0100)]
ath79: fix the AR7{1,2}00 USB PHY patches

PHY_SIMPLE is a bogus kconfig symbol, what we really need to select is
GENERIC_PHY.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
9 months agokernel/generic: add CONFIG_KCSAN to the 5.10 kconfig
Rui Salvaterra [Tue, 27 Jul 2021 19:02:31 +0000 (20:02 +0100)]
kernel/generic: add CONFIG_KCSAN to the 5.10 kconfig

Add the missing CONFIG_KCSAN (disabled). Found while making kernel_oldconfig on
an x86-64 subtarget.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
9 months agokernel: backport mdio_find_bus from 5.10.x
Damien Mascord [Tue, 13 Jul 2021 01:16:08 +0000 (11:16 +1000)]
kernel: backport mdio_find_bus from 5.10.x

mdio-tools (https://github.com/wkz/mdio-tools) requires the use of
mdio_find_bus, which is not present in 5.4.x.

This patch backports the required change from 5.10.x to 5.4.x

The original patch submission for this can be found at
https://patchwork.ozlabs.org/project/netdev/patch/20200201074625.8698-2-jeremy.linton@arm.com/

Signed-off-by: Damien Mascord <tusker@tusker.org>
[Add original patch description]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
9 months agokernel: bump 5.4 to 5.4.138
John Audia [Wed, 4 Aug 2021 11:55:58 +0000 (07:55 -0400)]
kernel: bump 5.4 to 5.4.138

All patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
9 months agokernel: bump 5.10 to 5.10.56
Rui Salvaterra [Wed, 4 Aug 2021 11:44:53 +0000 (12:44 +0100)]
kernel: bump 5.10 to 5.10.56

No patches needed refreshing

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
9 months agokernel: bump 5.10 to 5.10.55
Rui Salvaterra [Mon, 2 Aug 2021 11:20:46 +0000 (12:20 +0100)]
kernel: bump 5.10 to 5.10.55

No deleted or manually refreshed patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
9 months agoprocd: change procd_add_start_mount_trigger to do restart
Daniel Golle [Sun, 8 Aug 2021 13:47:54 +0000 (14:47 +0100)]
procd: change procd_add_start_mount_trigger to do restart

Change procd_add_start_mount_trigger to procd_add_restart_mount_trigger
and make it call 'restart' instead of 'start'.
This is more useful as it allows to handle both cases, intial start of
a services as well as restarting services. Calling 'restart' on a
service which has not yet been started has the same result as calling
'start'.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agomvebu: switch to generic sdcard upgrade method
Stijn Tintel [Fri, 6 Aug 2021 22:42:43 +0000 (01:42 +0300)]
mvebu: switch to generic sdcard upgrade method

Now that we have a generic sdcard upgrade method, which was copied from
the mvebu platform method, we can switch mvebu to the generic method.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
9 months agobase-files: add generic sdcard upgrade method
Stijn Tintel [Thu, 29 Jul 2021 22:11:37 +0000 (01:11 +0300)]
base-files: add generic sdcard upgrade method

Add a generic sdcard upgrade method instead of duplicating code in yet
another target, and add a feature flag to only install this upgrade
method in targets that set this flag. Copied from mvebu.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
9 months agoscripts/target-metadata.pl: order features alphabetically
Stijn Tintel [Fri, 6 Aug 2021 22:28:08 +0000 (01:28 +0300)]
scripts/target-metadata.pl: order features alphabetically

We generaly do this in many other places, so let's do it here also.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
9 months agofirmware-utils: add GPL 2.0 SPDX to files with no license info
Rafał Miłecki [Wed, 4 Aug 2021 13:58:47 +0000 (15:58 +0200)]
firmware-utils: add GPL 2.0 SPDX to files with no license info

These files fall under the project license: GPL-2.0-only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofirmware-utils: tplink-safeloader: replace BSD-2-Clause boilerplate with SPDX
Rafał Miłecki [Wed, 4 Aug 2021 12:32:14 +0000 (14:32 +0200)]
firmware-utils: tplink-safeloader: replace BSD-2-Clause boilerplate with SPDX

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Matthias Schiffer <mschiffer@universe-factory.net>
9 months agofirmware-utils: seama: replace BSD-3-Clause boilerplate with SPDX
Rafał Miłecki [Wed, 4 Aug 2021 12:26:35 +0000 (14:26 +0200)]
firmware-utils: seama: replace BSD-3-Clause boilerplate with SPDX

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofirmware-utils: replace GPL 2.0+ boilerplate/reference with SPDX
Rafał Miłecki [Wed, 4 Aug 2021 11:06:24 +0000 (13:06 +0200)]
firmware-utils: replace GPL 2.0+ boilerplate/reference with SPDX

This uses "GPL-2.0-or-later" header for files identified using scancode
license scanner with 100% score as GPL 2.0 or later.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofirmware-utils: replace GPL 2.0 boilerplate/reference with SPDX
Rafał Miłecki [Wed, 4 Aug 2021 10:30:38 +0000 (12:30 +0200)]
firmware-utils: replace GPL 2.0 boilerplate/reference with SPDX

This uses "GPL-2.0-only" header for files identified using scancode
license scanner with 100% score as GPL 2.0.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
9 months agokirkwood: import patch to fix build and refresh patches
Daniel Golle [Thu, 5 Aug 2021 22:40:21 +0000 (23:40 +0100)]
kirkwood: import patch to fix build and refresh patches

kirkwood build broke due to missing include needed for ETH_ALEN.
Add patch (sent upstream as well) to address that.
Refresh patches for 5.4 and 5.10.

Fixes: 91a52f22a1 ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agokernel: kmod-xfrm-interface requires IPv6
Stijn Tintel [Fri, 12 Mar 2021 12:50:56 +0000 (14:50 +0200)]
kernel: kmod-xfrm-interface requires IPv6

The xfrm_interface module will not be built if IPv6 is not enabled in
the kernel. Add this dependency in the kmod package to avoid people
wondering why it doesn't build when they disabled IPv6.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
9 months agoramips: add missing label-mac-device for Xiaomi Mi Router 4A (100M)
Fabian Bläse [Mon, 19 Jul 2021 19:54:29 +0000 (21:54 +0200)]
ramips: add missing label-mac-device for Xiaomi Mi Router 4A (100M)

As both the Mi Router 4A (100M) and the Mi Router 4C use the same
label-mac-device, the alias can be moved to the shared dtsi.

Signed-off-by: Fabian Bläse <fabian@blaese.de>
9 months agorealtek: fix syntax error introduced by previous commit
Daniel Golle [Thu, 5 Aug 2021 14:20:29 +0000 (15:20 +0100)]
realtek: fix syntax error introduced by previous commit

A superflus ')' character has slipped into commit 91a52f22a1. Remove it
to fix build.

Fixes: 91a52f22a1 ("treewide: backport support for nvmem on non platform devices")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agogeneric: fix to few arguments to of_get_mac_address
David Bauer [Thu, 5 Aug 2021 08:34:26 +0000 (10:34 +0200)]
generic: fix to few arguments to of_get_mac_address

Fixes commit 91a52f22a13d ("treewide: backport support for nvmem on non platform devices")

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agoprocd: update to git HEAD and add new script helpers
Daniel Golle [Thu, 5 Aug 2021 01:56:17 +0000 (02:56 +0100)]
procd: update to git HEAD and add new script helpers

 e10de28 jail: cgroups-bpf: fix compile with musl 1.2
 f5d9b14 hotplug-dispatch: fix rare memory leaks in error paths

Add new init script helpers:
 procd_add_start_mount_trigger
 procd_add_reload_mount_trigger
 procd_get_mountpoints

Both trigger helpers expect a list of paths which are checked against
the mount targets configured in /etc/config/fstab and a trigger for all
mountpoints covered by the list of paths is setup.

procd_get_mountpoints is useful to find out if and which mountpoints
are covered by a list of paths.

Example:
  DATADIRS="/mnt/data/foo /mnt/data/bar /etc/foo/baz /var/lib/doe"

  start_service() {
    [ "$_BOOT" = "1" ] &&
      [ "$(procd_get_mountpoints $DATADIRS)" ] && return 0

    procd_open_instance
    # ...
    procd_close_instance
  }

  boot() {
    _BOOT=1 start
  }

  service_triggers() {
    procd_add_start_mount_trigger $DATADIRS
  }

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agofstools: update to git HEAD
Daniel Golle [Thu, 5 Aug 2021 02:34:56 +0000 (03:34 +0100)]
fstools: update to git HEAD

 d4f0129 blockd: also report target in notifications

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agomediatek: mt7622: enable HW RNG
David Bauer [Mon, 12 Jul 2021 23:11:57 +0000 (01:11 +0200)]
mediatek: mt7622: enable HW RNG

MT7622 provides are hardware RNG with upstream Linux driver. Enable
compilation of this driver to make use of the hardware RNG.

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agoath79: add support for GL.iNet GL-X300B
John Marrett [Tue, 8 Jun 2021 16:57:28 +0000 (12:57 -0400)]
ath79: add support for GL.iNet GL-X300B

The GL-X300B is a industrial 4G LTE router based on the Qualcomm
QCA9531 SoC.

Specifications:
 - Qualcomm QCA9531 @ 650 MHz
 - 128 MB of RAM
 - 16 MB of SPI NOR FLASH
 - 2x 10/100 Mbps Ethernet
 - 2.4GHz 802.11b/g/n
 - 1x USB 2.0 (vbus driven by GPIO)
 - 4x LED, driven by GPIO
 - 1x button (reset)
 - 1x mini pci-e slot (vcc driven by GPIO)
 - RS-485 Serial Port (untested)

Flash instructions:

This firmware can be flashed using either sysupgrade from the GL.iNet
firmware or the recovery console as follows:

 - Press and hold the reset button
 - Connect power to the router, wait five seconds
 - Manually configure 192.168.1.2/24 on your computer, connect to
   192.168.1.1
 - Upload the firmware image using the web interface

RS-485 serial port is untested and may depend on the following commit in
the GL.iNet repo:

https://github.com/gl-inet/openwrt/commit/202e83a32ae308fbb70502b6dbe3bb0bf8b1fba9

MAC addresses as verified by OEM firmware:

vendor   OpenWrt   address
WAN      eth0      label
LAN      eth1      label + 1
2g       phy0      label + 2

The label MAC address was found in the art partition at 0x0

Based on vendor commit:

https://github.com/gl-inet/openwrt/commit/16c5708b207eb76ff19a040dc973e560d3d8074b

Signed-off-by: John Marrett <johnf@zioncluster.ca>
9 months agogeneric: add missing Kconfig symbol ARM_SCMI_PROTOCOL
Hannu Nyman [Mon, 2 Aug 2021 17:14:57 +0000 (20:14 +0300)]
generic: add missing Kconfig symbol ARM_SCMI_PROTOCOL

Add the missing ARM_SCMI_PROTOCOL symbol. Apparently it was exposed
for 5.10.53 with a kernel dependency change.
Missing symbol observed with mediatek/7622 E8450/RT3200 router.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
9 months agoethtool: update to v5.13
David Bauer [Sat, 31 Jul 2021 10:07:10 +0000 (12:07 +0200)]
ethtool: update to v5.13

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agogeneric: enable netlink ethtool interface
David Bauer [Thu, 4 Mar 2021 00:17:44 +0000 (01:17 +0100)]
generic: enable netlink ethtool interface

The virtual cable tester depends on the netlink interface for ethtool.
Thus, enable it in the generic kernel configuration.

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agoethtool: introduce ethtool-full build variant
David Bauer [Wed, 3 Mar 2021 23:11:31 +0000 (00:11 +0100)]
ethtool: introduce ethtool-full build variant

Netlink support is required for using the virtual cable tester
functionality.

Remove the pretty print build option and instead create a second package
variant ethtool-full. This allows users to install the full ethtool
featureset using opkg.

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agotreewide: backport support for nvmem on non platform devices
Ansuel Smith [Fri, 23 Jul 2021 18:19:43 +0000 (20:19 +0200)]
treewide: backport support for nvmem on non platform devices

In the current state, nvmem cells are only detected on platform device.
To quickly fix the problem, we register the affected problematic driver
with the of_platform but that is more an hack than a real solution.
Backport from net-next the required patch so that nvmem can work also
with non-platform devices and rework our current patch.
Drop the mediatek and dsa workaround and rework the ath10k patches.
Rework every driver that use the of_get_mac_address api.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
9 months agoprocd: update to git HEAD
Daniel Golle [Wed, 4 Aug 2021 18:10:19 +0000 (19:10 +0100)]
procd: update to git HEAD

Fix build on glibc targets and address a bunch of compiler warnings.

 93fc089 jail: cgroups-bpf: don't use sys/reg.h when building with glibc
 548d057 jail: don't ignore return value of seteuid()
 220b716 jail: ignore return value when creating default /dev symlinks
 78d5baa hotplug-dispatch: don't ignore asprintf() return value
 736aee5 uxc: always handle asprintf() return value
 2b20456 hotplug-dispatch: replace wrongly used assert()
 bfc86a2 jail: cgroups: replace wrongly used assert()
 516bdf2 jail: don't ignore return value of write()

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agobase-files: upgrade: try umount lvm and loop devices
Daniel Golle [Wed, 4 Aug 2021 18:03:16 +0000 (19:03 +0100)]
base-files: upgrade: try umount lvm and loop devices

Try umount on device mapper and loop devices still mounted, so the
subsequent call to disactivate all physical volumes and delete all
loop devices is more likely to succeed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agokernel: fix kernel 5.5 and 5.9 PCI DT regressions
Rafał Miłecki [Wed, 4 Aug 2021 06:10:02 +0000 (08:10 +0200)]
kernel: fix kernel 5.5 and 5.9 PCI DT regressions

This fixes PCI on bcm53xx.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofstools: update to git HEAD
Daniel Golle [Tue, 3 Aug 2021 21:55:00 +0000 (22:55 +0100)]
fstools: update to git HEAD

 141ac85 libblkid-tiny: fix invalid open syscall return check
 9e26563 libblkid-tiny: install header file to include dir

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agoubox: update to git HEAD
Daniel Golle [Tue, 3 Aug 2021 21:43:39 +0000 (22:43 +0100)]
ubox: update to git HEAD

 1f4f72b logd: fix privilege dropping order
 205defb logread: fix erroneous message "Logread connected to" with udp

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agoimages: squashfs: xattrs should not depend on buld host
Daniel Golle [Mon, 2 Aug 2021 18:14:53 +0000 (20:14 +0200)]
images: squashfs: xattrs should not depend on buld host

Enable xattr for the generated squashfs only if needed for SELinux.
This eliminates warnings during boot on target when building
(non-SELinux) OpenWrt on SELinux-enabled hosts like Fedora.

Reported-by: fda77 <fda77@users.noreply.github.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agobase-files: sysupgrade stage2: fix losetup detection
Daniel Golle [Mon, 2 Aug 2021 18:51:58 +0000 (20:51 +0200)]
base-files: sysupgrade stage2: fix losetup detection

If the busybox applet losetup was selected, `command -v` selects that
during sysupgrade. As this applet is in another path and doesn't cover
the '-D' option which is used to make sure user-defined loop devices
are no longer active during sysupgrade.
Detect losetup at the path of the full utility to avoid error messages
in case of the busybox applet being selected.

Reported-by: fda77 <fda77@users.noreply.github.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agonat46: fix translation of ICMP protocols parameter problem and unreachable
Hans Dedecker [Sun, 1 Aug 2021 19:10:05 +0000 (21:10 +0200)]
nat46: fix translation of ICMP protocols parameter problem and unreachable

9b3a819 nat46-core: Fix translation of ICMP protocols parameter problem and unreachable (#27)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
9 months agodnsmasq: reset EXTRA_MOUNT in the right place
Daniel Golle [Sun, 1 Aug 2021 14:05:18 +0000 (15:05 +0100)]
dnsmasq: reset EXTRA_MOUNT in the right place

EXTRA_MOUNT variable should be reset in dnsmasq_start() rather than
just once at the beginning of the script.

Fixes: ac4e8aa2f8 ("dnsmasq: fix more dnsmasq jail issues")
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agodnsmasq: fix more dnsmasq jail issues
Daniel Golle [Sun, 1 Aug 2021 10:25:41 +0000 (11:25 +0100)]
dnsmasq: fix more dnsmasq jail issues

 * remove superflus mounts of /dev/null and /dev/urandom
 * reset EXTRA_MOUNTS at the beginning of the script
 * add mount according to ignore_hosts_dir
 * don't add mount for file which is inside a directory already in the
   EXTRA_MOUNTS list

Fixes: 59c63224e1 ("dnsmasq: rework jail mounts")
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agodnsmasq: rework jail mounts
Daniel Golle [Sun, 1 Aug 2021 02:33:52 +0000 (03:33 +0100)]
dnsmasq: rework jail mounts

 * split into multiple lines to improve readability
 * use EXTRA_MOUNT for addnhosts instead of blindly adding /tmp/hosts
 * remove no longer needed mount for /sbin/hotplug-call
 * add dhcp-script.sh dependencies (jshn, ubus)

Fixes: 3a94c2ca5c ("dnsmasq: add /tmp/hosts/ to jail_mount")
Fixes: aed95c4cb8 ("dnsmasq: switch to ubus-based hotplug call")
Reported-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agogeneric: add missing ARM64 crypto Kconfig symbols
David Bauer [Sat, 31 Jul 2021 10:36:40 +0000 (12:36 +0200)]
generic: add missing ARM64 crypto Kconfig symbols

bcm27xx-bcm2710 builds are stalling when compiled with V=s.

Explitily disable these unset symbols to avoid stalling
builds.

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agoodhcp6c: update to latest git HEAD
Hans Dedecker [Sat, 31 Jul 2021 19:24:14 +0000 (21:24 +0200)]
odhcp6c: update to latest git HEAD

94adc8b odhcp6c: use strpbrk to provide get_sep_pos
e0d9a4b cmake: enable extra compiler checks

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
9 months agokernel: bump 5.4 to 5.4.137
John Audia [Sat, 31 Jul 2021 10:53:10 +0000 (06:53 -0400)]
kernel: bump 5.4 to 5.4.137

Automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
9 months agokernel: bump 5.4 to 5.4.136
John Audia [Wed, 28 Jul 2021 12:29:03 +0000 (08:29 -0400)]
kernel: bump 5.4 to 5.4.136

All patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
9 months agokernel: bump 5.4 to 5.4.135
John Audia [Sun, 25 Jul 2021 18:36:53 +0000 (14:36 -0400)]
kernel: bump 5.4 to 5.4.135

All patches automatically rebased.

Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800

No dmesg regressions, everything functional

Signed-off-by: John Audia <graysky@archlinux.us>
9 months agogeneric: add missing Kconfig symbol
David Bauer [Thu, 29 Jul 2021 20:57:24 +0000 (22:57 +0200)]
generic: add missing Kconfig symbol

Fixes build errors for sunxi as well as rockchip targets.

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agootrx: use firmware-utils.git to avoid code duplication
Rafał Miłecki [Fri, 30 Jul 2021 11:02:41 +0000 (13:02 +0200)]
otrx: use firmware-utils.git to avoid code duplication

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agofstools: update to git HEAD
Daniel Golle [Fri, 30 Jul 2021 01:11:45 +0000 (02:11 +0100)]
fstools: update to git HEAD

 b7bf185 blockd: make most calls to 'block' asynchronous

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
9 months agokernel: bump 5.10 to 5.10.54
Rui Salvaterra [Wed, 28 Jul 2021 14:53:41 +0000 (15:53 +0100)]
kernel: bump 5.10 to 5.10.54

Deleted (upstreamed) patches:
mediatek/patches-5.10/000-spi-fix-fifo.patch

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
9 months agokernel: bump 5.10 to 5.10.53
Rui Salvaterra [Sun, 25 Jul 2021 20:00:58 +0000 (21:00 +0100)]
kernel: bump 5.10 to 5.10.53

No deleted or manually refreshed patches.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
9 months agogeneric: fix build warning
David Bauer [Thu, 29 Jul 2021 18:28:10 +0000 (20:28 +0200)]
generic: fix build warning

Fixes a unused variable warning:

drivers/of/of_net.c: In function 'of_get_mac_address_mtd':
drivers/of/of_net.c:92:19: warning: unused variable 'prop' [-Wunused-variable]

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agomediatek: mt7623: import patch to fix msi warning
Nick Hainke [Wed, 28 Jul 2021 21:18:01 +0000 (23:18 +0200)]
mediatek: mt7623: import patch to fix msi warning

The 1st generation MediaTek PCIe host bridge cannot handle Message
Signaled Interrupts (MSIs). The core PCI code is not aware that MSI is
not available. This results in warnings of the form:

WARNING: CPU: 2 PID: 112 at include/linux/msi.h:219
  pci_msi_setup_msi_irqs.constprop.8+0x64/0x6c
Modules linked in: ahci(+) libahci libata sd_mod scsi_mod
  gpio_button_hotplug
CPU: 2 PID: 112 Comm: kmodloader Not tainted 5.10.52 #0
Hardware name: Mediatek Cortex-A7 (Device Tree)

Import patches that introduce the 'no_msi' attribute to signal missing
MSI support to the core PCI.

Refresh patches:
- 000-spi-fix-fifo.patch
- 330-mtk-bmt-support.patch
- 510-net-mediatek-add-flow-offload-for-mt7623.patch
- 601-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch
- 610-pcie-mediatek-fix-clearing-interrupt-status.patch
- 700-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
- 710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
9 months agobcm53xx: refresh kernel 5.10 config
Rafał Miłecki [Thu, 29 Jul 2021 12:53:29 +0000 (14:53 +0200)]
bcm53xx: refresh kernel 5.10 config

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agobcm53xx: add testing support for kernel 5.10
Rafał Miłecki [Thu, 29 Jul 2021 11:50:19 +0000 (13:50 +0200)]
bcm53xx: add testing support for kernel 5.10

It still requires fixing PCIe support:
[    6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[    6.652217] pcie_iproc_bcma bcma0:7:   No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
[    6.661833] OF: /axi@18000000/pcie@12000: Missing device_type
[    6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12
[    6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
[    6.681514] pcie_iproc_bcma bcma0:8:   No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
[    6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12
[    6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
[    6.705048] pcie_iproc_bcma bcma0:9:   No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
[    6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agokernel: fix bgmac compilation in kernel 5.10
Rafał Miłecki [Thu, 29 Jul 2021 11:48:41 +0000 (13:48 +0200)]
kernel: fix bgmac compilation in kernel 5.10

It's required since upstream kernel commit 4bdc0d676a64 ("remove
ioremap_nocache and devm_ioremap_nocache").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
9 months agogeneric: fix compile-error for non-mtd platforms
David Bauer [Thu, 29 Jul 2021 06:45:24 +0000 (08:45 +0200)]
generic: fix compile-error for non-mtd platforms

Fixes commit cd39aba402ea ("generic: write back netdev MAC-address to device-tree")

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agogeneric: write back netdev MAC-address to device-tree
David Bauer [Wed, 28 Jul 2021 22:29:53 +0000 (00:29 +0200)]
generic: write back netdev MAC-address to device-tree

The label-mac logic relies on the mac-address property of a netdev
devices of-node. However, the mac address can also be stored as a
different property or read from e.g. an mtd device.

Create this node when reading a mac-address from OF if it does not
already exist and copy the mac-address used for the device to this
property. This way, the MAC address can be accessed using procfs.

Signed-off-by: David Bauer <mail@david-bauer.net>
9 months agofstools: update to git HEAD
Daniel Golle [Wed, 28 Jul 2021 19:25:12 +0000 (20:25 +0100)]
fstools: update to git HEAD

 46d02c2 block: don't add non-ubifs ubi devices
 cc63933 blockd: send mount.ready when startup has completed

Signed-off-by: Daniel Golle <daniel@makrotopia.org>