ath79: add Netgear WNR612 v2

Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

As there is a rebranded WNR612v2 called ON Networks N150R, add
a dtsi which includes all device support, and add a separate dts
for the device only (with a separate one for the subsequent N150R).

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 92b7e7da3ea88eef272ab4aac63004e9a3a525d6..68f94ed3c30f5b249c16606828d265ac8c890e6d 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -22,6 +22,11 @@ case "$board" in
        ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
        ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
        ;;
+"netgear,wnr612-v2")
+       ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
+       ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
+       ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
+       ;;
 "tplink,tl-mr3020-v1")
        ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x02"
        ;;

diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index f734518f69778af537db7612cf72d7a8dc2c792a..2caf443fe8bc649db6b70d474888dd5fd63fca89 100755 (executable)
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -33,6 +33,12 @@ ath79_setup_interfaces()
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
 
+       "netgear,wnr612-v2")
+               ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+               ucidef_add_switch "switch0" \
+               "0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
+               ;;
+
        "tplink,tl-mr3020-v1")
                ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" "0@eth0" "1:lan"

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 498cc4e6cb30ffb3d0662c99f6dd7e6045863c24..1ed74608c87046751d6064f0f4bb1440b650eb61 100644 (file)
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -54,6 +54,7 @@ case "$FIRMWARE" in
        "tplink,tl-wdr4300")
                ath9k_eeprom_extract "art" 20480 1088
                ;;
+       "netgear,wnr612-v2"|\
        "tplink,tl-wr740n-v2"|\
        "ubnt,unifi")
                ath9k_eeprom_extract "art" 4096 2048

diff --git a/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts
new file mode 100644 (file)
index 0000000..d804064
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar7240_netgear_wnr612-v2.dtsi"
+
+/ {
+       model = "Netgear WNR612 v2";
+       compatible = "netgear,wnr612-v2";
+};
+

diff --git a/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi
new file mode 100644 (file)
index 0000000..c5ceb6e
--- /dev/null
+++ b/target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7240.dtsi"
+
+/ {
+       compatible = "netgear,wnr612-v2", "qca,ar7240";
+       model = "Netgear WNR612 V2";
+
+       aliases {
+               led-status = &led_power;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               led_power: power {
+                       label = "netgear:green:power";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               };
+
+               lan1 {
+                       label = "netgear:green:lan1";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+
+               lan2 {
+                       label = "netgear:green:lan2";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "netgear:green:wan";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan: wlan {
+                       label = "netgear:green:wlan";
+                       gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               reg = <0x0 0x40000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               reg = <0x40000 0x10000>;
+                               label = "u-boot-env";
+                       };
+
+                       partition@50000 {
+                               reg = <0x50000 0x3a0000>;
+                               label = "firmware";
+                       };
+
+                       partition@3f0000 {
+                               reg = <0x3f0000 0x10000>;
+                               label = "art";
+                               read-only;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&phy4>;
+
+       mtd-mac-address = <&uboot 0x1fc00>;
+       mtd-mac-address-increment = <(-1)>;
+};
+
+&eth1 {
+       status = "okay";
+
+       mtd-mac-address = <&uboot 0x1fc00>;
+       mtd-mac-address-increment = <1>;
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy4: ethernet-phy@4 {
+               reg = <4>;
+               phy-mode = "mii";
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k: wifi@168c,002b {
+               compatible = "pci168c,002b";
+               reg = <0x0000 0 0 0 0>;
+               qca,no-eeprom;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+};
+
+&uart {
+       status = "okay";
+};

diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile
index f4c0c1e3a51edb2beede646edc5888194ed8046d..15f4c1883aed0b8595e6ba84901b2ece50c44f9d 100644 (file)
--- a/target/linux/ath79/image/Makefile
+++ b/target/linux/ath79/image/Makefile
@@ -75,6 +75,7 @@ ifeq ($(SUBTARGET),nand)
 include ./nand.mk
 endif
 ifeq ($(SUBTARGET),tiny)
+include ./tiny-netgear.mk
 include ./tiny-tp-link.mk
 endif
 $(eval $(call BuildImage))

diff --git a/target/linux/ath79/image/tiny-netgear.mk b/target/linux/ath79/image/tiny-netgear.mk
new file mode 100644 (file)
index 0000000..81f83fd
--- /dev/null
+++ b/target/linux/ath79/image/tiny-netgear.mk
@@ -0,0 +1,19 @@
+include ./common-netgear.mk
+
+
+define Device/netgear_wnr612-v2
+  ATH_SOC := ar7240
+  DEVICE_TITLE := Netgear WNR612v2
+  DEVICE_DTS := ar7240_netgear_wnr612-v2
+  NETGEAR_KERNEL_MAGIC := 0x32303631
+  KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
+  KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
+  NETGEAR_BOARD_ID := REALWNR612V2
+  IMAGE_SIZE := 3904k
+  IMAGES := sysupgrade.bin factory.img
+  IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
+  IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
+  SUPPORTED_DEVICES := netgear,wnr612-v2 wnr612-v2
+endef
+TARGET_DEVICES += netgear_wnr612-v2