package/base-files/image-config.in

   1 # Copyright (C) 2006-2012 OpenWrt.org
   2 # Copyright (C) 2010 Vertical Communications
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 menuconfig PREINITOPT
   9         bool "Preinit configuration options" if IMAGEOPT
  10         default n
  11         help
  12                 These options are used to control the environment used to initialize
  13                 the system before running init (which typically mean /sbin/init which
  14                 switches to multiuser mode).
  15
  16 config TARGET_PREINIT_SUPPRESS_STDERR
  17         bool "Suppress stderr messages during preinit" if PREINITOPT
  18         default y
  19         help
  20                 Sends stderr to null during preinit.  This is the default behaviour
  21                 in previous versions of OpenWRT.  This also prevents init process
  22                 itself from displaying stderr, however processes launched by init
  23                 in multiuser through inittab will use the current terminal (e.g.
  24                 the ash shell launched by inittab will display stderr).  That's
  25                 the same behaviour as seen in previous version of OpenWRT.
  26
  27 config TARGET_PREINIT_TIMEOUT
  28         int
  29         prompt "Failsafe wait timeout" if PREINITOPT
  30         default 2
  31         help
  32                 How long to wait for failsafe mode to be entered before
  33                 continuing with a regular boot if failsafe not selected.
  34
  35 config TARGET_PREINIT_SHOW_NETMSG
  36         bool
  37         prompt "Show all preinit network messages" if PREINITOPT
  38         default n
  39         help
  40                 Show preinit all network messages (via netmsg broadcast), not only
  41                 the message indicating to press reset to enter failsafe.  Note that
  42                 if the architecture doesn't define an interface, and there is no
  43                 'Preinit network interface' defined, then no messages will be
  44                 emitted, even if this is set.
  45
  46 config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG
  47         bool
  48         prompt "Suppress network message indicating failsafe" if PREINITOPT
  49         default n
  50         help
  51                 If "Show all preinit network messages" above is not set, then
  52                 setting this option suppresses the only message that would be
  53                 emitted otherwise, name the network message to enter failsafe
  54                 (via netmsg).
  55
  56 config TARGET_PREINIT_IFNAME
  57         string
  58         prompt "Preinit network interface" if PREINITOPT
  59         default ""
  60         help
  61                 Interface for sending preinit messages to network, and any other
  62                 default networking in failsafe or preinit.  If empty
  63                 uses $ifname (if defined in /etc/preinit.arch).
  64
  65 config TARGET_PREINIT_IP
  66         string
  67         prompt "IP address for preinit network messages" if PREINITOPT
  68         default "192.168.1.1"
  69         help
  70                 IP address used to configure interface for preinit network
  71                 messages, including failsafe messages
  72
  73 config TARGET_PREINIT_NETMASK
  74         string
  75         prompt "Netmask for preinit network messages" if PREINITOPT
  76         default "255.255.255.0"
  77         help
  78                 Netmask used to configure interface for preinit network
  79                 messages, including failsafes messages
  80
  81 config TARGET_PREINIT_BROADCAST
  82         string
  83         prompt "Broadcast address for preinit network messages" if PREINITOPT
  84         default "192.168.1.255"
  85         help
  86                 Broadcast address to which to send preinit network messages, as
  87                 as failsafe messages
  88
  89
  90 menuconfig INITOPT
  91         bool "Init configuration options" if IMAGEOPT
  92         default n
  93         help
  94                 These option choose the command that will run as the 'init' command
  95                 (that is which is responsible for controlling the system once preinit
  96                 transfers control to it) as well as some options controlling its
  97                 behaviour.  Normally init is /sbin/init.
  98
  99         config TARGET_INIT_PATH
 100                 string
 101                 prompt "PATH for regular boot" if INITOPT
 102                 default "/bin:/sbin:/usr/bin:/usr/sbin"
 103                 help
 104                         Default PATH used during normal operation
 105
 106         config TARGET_INIT_ENV
 107                 string
 108                 prompt "Environment variables to set when starting init (start with none)" if INITOPT
 109                 default ""
 110                 help
 111                         Should be a space seperated list of variable assignments.  These
 112                         variables will be present in the environment.  Spaces may not be
 113                         present (including through expansion) even in a quoted string
 114                         (env doesn't understanding quoting).
 115
 116         config TARGET_INIT_CMD
 117                 string
 118                 prompt "Init command" if INITOPT
 119                 default "/sbin/init"
 120                 help
 121                         The executable to run as the init process.  Is 'exec'd by
 122                         preinit (which is the init that the kernel launches on boot).
 123
 124         config TARGET_INIT_SUPPRESS_STDERR
 125                 bool
 126                 prompt "Suppress stderr messages of init" if INITOPT
 127                 default y
 128                 help
 129                         Prevents showing stderr messages for init command if not already
 130                         suppressed during preinit.  This is the default behaviour in
 131                         previous versions of OpenWRT.  Removing this does nothing if
 132                         stderr is suppressed during preinit (which is the default).
 133
 134
 135 menuconfig VERSIONOPT
 136         bool "Version configuration options" if IMAGEOPT
 137         default n
 138         help
 139                 These options allow to override the version information embedded in
 140                 the /etc/openwrt_version, /etc/openwrt_release, /etc/banner and
 141                 /etc/opkg.conf files. Usually there is no need to set these, but
 142                 they're useful for release builds or custom OpenWrt redistributions
 143                 that should carry custom version tags.
 144
 145 if VERSIONOPT
 146
 147         config VERSION_DIST
 148                 string
 149                 prompt "Release distribution"
 150                 default "OpenWrt"
 151                 help
 152                         This is the name of the release distribution.
 153                         If unspecified, it defaults to OpenWrt.
 154
 155         config VERSION_NICK
 156                 string
 157                 prompt "Release version nickname"
 158                 help
 159                         This is the release codename embedded in the image.
 160                         If unspecified, it defaults to the name of source branch.
 161
 162         config VERSION_NUMBER
 163                 string
 164                 prompt "Release version number"
 165                 help
 166                         This is the release version number embedded in the image.
 167                         If unspecified, it defaults to the svn or git-svn revision
 168                         of the build tree.
 169
 170         config VERSION_REPO
 171                 string
 172                 prompt "Release repository"
 173                 default "http://downloads.openwrt.org/snapshots/trunk/%T/packages"
 174                 help
 175                         This is the repository address embedded in the image, it defaults
 176                         to the trunk snapshot repo; the url may contain the following placeholders:
 177                          %R .. Revision number
 178                          %V .. Release version or revision number, uppercase
 179                          %v .. Release version or revision number, lowercase
 180                          %C .. Release version or "Bleeding Edge", uppercase
 181                          %c .. Release version or "bleeding_edge", lowercase
 182                          %N .. Release name, uppercase
 183                          %n .. Release name, lowercase
 184                          %D .. Distribution name or "OpenWrt", uppercase
 185                          %d .. Distribution name or "openwrt", lowercase
 186                          %T .. Target name
 187                          %S .. Target/Subtarget name
 188
 189         config VERSION_MANUFACTURER
 190                 string
 191                 prompt "Manufacturer name"
 192                 help
 193                         This is the manufacturer name embedded in /etc/device_info
 194                         Useful for OEMs building OpenWrt based firmware
 195
 196         config VERSION_PRODUCT
 197                 string
 198                 prompt "Product name"
 199                 help
 200                         This is the product name embedded in /etc/device_info
 201                         Useful for OEMs building OpenWrt based firmware
 202
 203         config VERSION_HWREV
 204                 string
 205                 prompt "Hardware revision"
 206                 help
 207                         This is the hardware revision string embedded in /etc/device_info
 208                         Useful for OEMs building OpenWrt based firmware
 209 endif
 210
 211
 212 menuconfig PER_FEED_REPO
 213         bool "Separate feed repositories" if IMAGEOPT
 214         default y
 215         help
 216                 If set, a separate repository is generated within bin/*/packages/
 217                 for the core packages and each enabled feed.
 218
 219         config PER_FEED_REPO_ADD_DISABLED
 220                 bool "Add available but not enabled feeds to opkg.conf"
 221                 default y
 222                 depends on PER_FEED_REPO
 223                 help
 224                   Add not installed or disabled feeds from feeds.conf to opkg.conf.
 225
 226         config PER_FEED_REPO_ADD_COMMENTED
 227                 bool "Comment out not enabled feeds"
 228                 default y
 229                 depends on PER_FEED_REPO && PER_FEED_REPO_ADD_DISABLED
 230                 help
 231                   Add not enabled feeds as commented out source lines to opkg.conf.
 232
 233 source "tmp/.config-feeds.in"
 234
 235
 236 menuconfig SMIMEOPT
 237         bool "Package signing options" if IMAGEOPT
 238         default n
 239         help
 240                 These options configure the signing key and certificate to
 241                 be used for signing and verifying packages.
 242
 243         config OPKGSMIME_CERT
 244                 string
 245                 prompt "Path to certificate (PEM certificate format)" if SMIMEOPT
 246                 help
 247                   Path to the certificate to use for signature verification
 248
 249         config OPKGSMIME_KEY
 250                 string
 251                 prompt "Path to signing key (PEM private key format)" if SMIMEOPT
 252                 help
 253                   Path to the key to use for signing packages
 254
 255         config OPKGSMIME_PASSPHRASE
 256                 bool
 257                 default y
 258                 prompt "Wait for a passphrase when signing packages?" if SMIMEOPT
 259                 help
 260                   If this value is set, then the build will pause and request a passphrase
 261                   from the command line when signing packages. This SHOULD NOT be used with
 262                   automatic builds. If this value is not set, a file can be specified from
 263                   which the passphrase will be read.
 264
 265         config OPKGSMIME_PASSFILE
 266                 string
 267                 prompt "Path to a file containing the passphrase" if SMIMEOPT
 268                 depends on !OPKGSMIME_PASSPHRASE
 269                 help
 270                   Path to a file containing the passphrase for the signing key.
 271                   If the signing key is not encrypted and does not require a passphrase,
 272                   this option may be left blank.