target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-r7500.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "Netgear Nighthawk X4 R7500";
   7         compatible = "netgear,r7500", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0xe000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &uart4;
  26                 mdio-gpio0 = &mdio0;
  27         };
  28
  29         chosen {
  30                 bootargs = "rootfstype=squashfs noinitrd";
  31                 linux,stdout-path = "serial0:115200n8";
  32         };
  33
  34         soc {
  35                 pinmux@800000 {
  36                         i2c4_pins: i2c4_pinmux {
  37                                 pins = "gpio12", "gpio13";
  38                                 function = "gsbi4";
  39                                 bias-disable;
  40                         };
  41
  42                         nand_pins: nand_pins {
  43                                 mux {
  44                                         pins = "gpio34", "gpio35", "gpio36",
  45                                                "gpio37", "gpio38", "gpio39",
  46                                                "gpio40", "gpio41", "gpio42",
  47                                                "gpio43", "gpio44", "gpio45",
  48                                                "gpio46", "gpio47";
  49                                         function = "nand";
  50                                         drive-strength = <10>;
  51                                         bias-disable;
  52                                 };
  53                                 pullups {
  54                                         pins = "gpio39";
  55                                         bias-pull-up;
  56                                 };
  57                                 hold {
  58                                         pins = "gpio40", "gpio41", "gpio42",
  59                                                "gpio43", "gpio44", "gpio45",
  60                                                "gpio46", "gpio47";
  61                                         bias-bus-hold;
  62                                 };
  63                         };
  64
  65                         mdio0_pins: mdio0_pins {
  66                                 mux {
  67                                         pins = "gpio0", "gpio1";
  68                                         function = "gpio";
  69                                         drive-strength = <8>;
  70                                         bias-disable;
  71                                 };
  72                         };
  73
  74                         rgmii2_pins: rgmii2_pins {
  75                                 mux {
  76                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
  77                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
  78                                         function = "rgmii2";
  79                                         drive-strength = <8>;
  80                                         bias-disable;
  81                                 };
  82                         };
  83                 };
  84
  85                 gsbi@16300000 {
  86                         qcom,mode = <GSBI_PROT_I2C_UART>;
  87                         status = "ok";
  88                         serial@16340000 {
  89                                 status = "ok";
  90                         };
  91                         /*
  92                          * The i2c device on gsbi4 should not be enabled.
  93                          * On ipq806x designs gsbi4 i2c is meant for exclusive
  94                          * RPM usage. Turning this on in kernel manifests as
  95                          * i2c failure for the RPM.
  96                          */
  97                 };
  98
  99                 sata-phy@1b400000 {
 100                         status = "ok";
 101                 };
 102
 103                 sata@29000000 {
 104                         status = "ok";
 105                 };
 106
 107                 phy@100f8800 {          /* USB3 port 1 HS phy */
 108                         status = "ok";
 109                 };
 110
 111                 phy@100f8830 {          /* USB3 port 1 SS phy */
 112                         status = "ok";
 113                 };
 114
 115                 phy@110f8800 {          /* USB3 port 0 HS phy */
 116                         status = "ok";
 117                 };
 118
 119                 phy@110f8830 {          /* USB3 port 0 SS phy */
 120                         status = "ok";
 121                 };
 122
 123                 usb30@0 {
 124                         status = "ok";
 125                 };
 126
 127                 usb30@1 {
 128                         status = "ok";
 129                 };
 130
 131                 pcie0: pci@1b500000 {
 132                         status = "ok";
 133                 };
 134
 135                 pcie1: pci@1b700000 {
 136                         status = "ok";
 137                 };
 138
 139                 nand@1ac00000 {
 140                         status = "ok";
 141
 142                         pinctrl-0 = <&nand_pins>;
 143                         pinctrl-names = "default";
 144
 145                         nand-ecc-strength = <4>;
 146                         nand-bus-width = <8>;
 147
 148                         #address-cells = <1>;
 149                         #size-cells = <1>;
 150
 151                         qcadata@0 {
 152                                 label = "qcadata";
 153                                 reg = <0x0000000 0x0c80000>;
 154                                 read-only;
 155                         };
 156
 157                         APPSBL@c80000 {
 158                                 label = "APPSBL";
 159                                 reg = <0x0c80000 0x0500000>;
 160                                 read-only;
 161                         };
 162
 163                         APPSBLENV@1180000 {
 164                                 label = "APPSBLENV";
 165                                 reg = <0x1180000 0x0080000>;
 166                                 read-only;
 167                         };
 168
 169                         art: art@1200000 {
 170                                 label = "art";
 171                                 reg = <0x1200000 0x0140000>;
 172                                 read-only;
 173                         };
 174
 175                         kernel@1340000 {
 176                                 label = "kernel";
 177                                 reg = <0x1340000 0x0200000>;
 178                         };
 179
 180                         ubi@1540000 {
 181                                 label = "ubi";
 182                                 reg = <0x1540000 0x1800000>;
 183                         };
 184
 185                         netgear@2d40000 {
 186                                 label = "netgear";
 187                                 reg = <0x2d40000 0x0c00000>;
 188                                 read-only;
 189                         };
 190
 191                         reserve@3940000 {
 192                                 label = "reserve";
 193                                 reg = <0x3940000 0x46c0000>;
 194                                 read-only;
 195                         };
 196
 197                         firmware@1340000 {
 198                                 label = "firmware";
 199                                 reg = <0x1340000 0x1a00000>;
 200                         };
 201
 202                 };
 203
 204                 mdio0: mdio {
 205                         compatible = "virtual,mdio-gpio";
 206                         #address-cells = <1>;
 207                         #size-cells = <0>;
 208                         gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 209                         pinctrl-0 = <&mdio0_pins>;
 210                         pinctrl-names = "default";
 211
 212                         phy0: ethernet-phy@0 {
 213                                 device_type = "ethernet-phy";
 214                                 reg = <0>;
 215                                 qca,ar8327-initvals = <
 216                                         0x00004 0x7600000   /* PAD0_MODE */
 217                                         0x00008 0x1000000   /* PAD5_MODE */
 218                                         0x0000c 0x80        /* PAD6_MODE */
 219                                         0x000e4 0xaa545     /* MAC_POWER_SEL */
 220                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 221                                         0x0007c 0x4e        /* PORT0_STATUS */
 222                                         0x00094 0x4e        /* PORT6_STATUS */
 223                                         >;
 224                         };
 225
 226                         phy4: ethernet-phy@4 {
 227                                 device_type = "ethernet-phy";
 228                                 reg = <4>;
 229                         };
 230                 };
 231
 232                 gmac1: ethernet@37200000 {
 233                         status = "ok";
 234                         phy-mode = "rgmii";
 235                         qcom,id = <1>;
 236
 237                         pinctrl-0 = <&rgmii2_pins>;
 238                         pinctrl-names = "default";
 239
 240                         mtd-mac-address = <&art 6>;
 241
 242                         fixed-link {
 243                                 speed = <1000>;
 244                                 full-duplex;
 245                         };
 246                 };
 247
 248                 gmac2: ethernet@37400000 {
 249                         status = "ok";
 250                         phy-mode = "sgmii";
 251                         qcom,id = <2>;
 252
 253                         mtd-mac-address = <&art 0>;
 254
 255                         fixed-link {
 256                                 speed = <1000>;
 257                                 full-duplex;
 258                         };
 259                 };
 260         };
 261
 262         gpio-keys {
 263                 compatible = "gpio-keys";
 264
 265                 wifi {
 266                         label = "wifi";
 267                         gpios = <&qcom_pinmux 6 1>;
 268                         linux,code = <KEY_WLAN>;
 269                 };
 270
 271                 reset {
 272                         label = "reset";
 273                         gpios = <&qcom_pinmux 54 1>;
 274                         linux,code = <KEY_RESTART>;
 275                 };
 276
 277                 wps {
 278                         label = "wps";
 279                         gpios = <&qcom_pinmux 65 1>;
 280                         linux,code = <KEY_WPS_BUTTON>;
 281                 };
 282         };
 283
 284         gpio-leds {
 285                 compatible = "gpio-leds";
 286
 287                 usb1 {
 288                         label = "r7500:amber:usb1";
 289                         gpios = <&qcom_pinmux 7 0>;
 290                 };
 291
 292                 usb3 {
 293                         label = "r7500:amber:usb3";
 294                         gpios = <&qcom_pinmux 8 0>;
 295                 };
 296
 297                 status {
 298                         label = "r7500:amber:status";
 299                         gpios = <&qcom_pinmux 9 0>;
 300                 };
 301
 302                 internet {
 303                         label = "r7500:white:internet";
 304                         gpios = <&qcom_pinmux 22 0>;
 305                 };
 306
 307                 wan {
 308                         label = "r7500:white:wan";
 309                         gpios = <&qcom_pinmux 23 0>;
 310                 };
 311
 312                 wps {
 313                         label = "r7500:white:wps";
 314                         gpios = <&qcom_pinmux 24 0>;
 315                 };
 316
 317                 esata {
 318                         label = "r7500:white:esata";
 319                         gpios = <&qcom_pinmux 26 0>;
 320                 };
 321
 322                 power {
 323                         label = "r7500:white:power";
 324                         gpios = <&qcom_pinmux 53 0>;
 325                         default-state = "on";
 326                 };
 327
 328                 rfkill {
 329                         label = "r7500:white:rfkill";
 330                         gpios = <&qcom_pinmux 64 0>;
 331                 };
 332
 333                 wifi5g {
 334                         label = "r7500:white:wifi5g";
 335                         gpios = <&qcom_pinmux 67 0>;
 336                 };
 337         };
 338 };
 339
 340 &adm_dma {
 341         status = "ok";
 342 };