target/linux/lantiq/dts/amazonse.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,ase";
   7
   8         cpus {
   9                 cpu@0 {
  10                         compatible = "mips,mips4Kc";
  11                 };
  12         };
  13
  14         biu@1F800000 {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 compatible = "lantiq,biu", "simple-bus";
  18                 reg = <0x1F800000 0x800000>;
  19                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  20
  21                 icu0: icu@80200 {
  22                         #interrupt-cells = <1>;
  23                         interrupt-controller;
  24                         compatible = "lantiq,icu";
  25                         reg = <0x80200 0x28
  26                                 0x80228 0x28
  27                                 0x80250 0x28
  28                                 0x80278 0x28
  29                                 0x802a0 0x28>;
  30                 };
  31
  32                 watchdog@803F0 {
  33                         compatible = "lantiq,wdt";
  34                         reg = <0x803F0 0x10>;
  35                 };
  36         };
  37
  38         sram@1F000000 {
  39                 #address-cells = <1>;
  40                 #size-cells = <1>;
  41                 compatible = "lantiq,sram", "simple-bus";
  42                 reg = <0x1F000000 0x800000>;
  43                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  44
  45                 eiu0: eiu@101000 {
  46                         #interrupt-cells = <1>;
  47                         compatible = "lantiq,eiu-xway";
  48                         reg = <0x101000 0x1000>;
  49                         interrupt-parent = <&icu0>;
  50                         lantiq,eiu-irqs = <29 30 31>;
  51                 };
  52
  53                 pmu0: pmu@102000 {
  54                         compatible = "lantiq,pmu-xway";
  55                         reg = <0x102000 0x1000>;
  56                 };
  57
  58                 cgu0: cgu@103000 {
  59                         compatible = "lantiq,cgu-xway";
  60                         reg = <0x103000 0x1000>;
  61                         #clock-cells = <1>;
  62                 };
  63
  64                 rcu0: rcu@203000 {
  65                         compatible = "lantiq,rcu-xway";
  66                         reg = <0x203000 0x1000>;
  67                 };
  68         };
  69
  70         fpi@10000000 {
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 compatible = "lantiq,fpi", "simple-bus";
  74                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  75                 reg = <0x10000000 0xEF00000>;
  76
  77                 spi@E100800 {
  78                         compatible = "lantiq,ase-spi";
  79                         reg = <0xE100800 0x100>;
  80                         interrupt-parent = <&icu0>;
  81                         interrupts = <24 25 26>;
  82                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
  83                                         "spi_frm";
  84                         #address-cells = <1>;
  85                         #size-cells = <1>;
  86                 };
  87
  88                 gptu@E100A00 {
  89                         compatible = "lantiq,gptu-xway";
  90                         reg = <0xE100A00 0x100>;
  91                         interrupt-parent = <&icu0>;
  92                         interrupts = <97 98 99 100 101 102>;
  93                         status = "disabled";
  94                 };
  95
  96                 gpio: pinmux@E100B10 {
  97                         compatible = "lantiq,ase-pinctrl";
  98                         #gpio-cells = <2>;
  99                         gpio-controller;
 100                         reg = <0xE100B10 0xA0>;
 101                 };
 102
 103                 serial@E100C00 {
 104                         compatible = "lantiq,asc";
 105                         reg = <0xE100C00 0x400>;
 106                         interrupt-parent = <&icu0>;
 107                         interrupts = <72 74 75>;
 108                 };
 109
 110                 mei@E116000 {
 111                         compatible = "lantiq,mei-xway";
 112                         interrupt-parent = <&icu0>;
 113                         interrupts = <63>;
 114                 };
 115
 116                 ifxhcd@E101000 {
 117                         compatible = "lantiq,ifxhcd-ase";
 118                         reg = <0xE101000 0x1000
 119                                 0xE120000 0x3f000>;
 120                         interrupt-parent = <&icu0>;
 121                         interrupts = <39>;
 122                         status = "disabled";
 123                 };
 124
 125                 dma0: dma@E104100 {
 126                         compatible = "lantiq,dma-xway";
 127                         reg = <0xE104100 0x800>;
 128                 };
 129
 130                 ebu0: ebu@E105300 {
 131                         compatible = "lantiq,ebu-xway";
 132                         reg = <0xE105300 0x100>;
 133                 };
 134
 135                 ppe@E234000 {
 136                         compatible = "lantiq,ppe-ase";
 137                         interrupt-parent = <&icu0>;
 138                         interrupts = <85>;
 139                 };
 140
 141                 etop@E180000 {
 142                         compatible = "lantiq,etop-xway";
 143                         reg = <0xE180000 0x40000>;
 144                         interrupt-parent = <&icu0>;
 145                         interrupts = <105 109>;
 146                 };
 147         };
 148
 149         adsl {
 150                 compatible = "lantiq,adsl-ase";
 151         };
 152 };