D-Link DAP-1350 initial support
[openwrt/staging/lynxis/omap.git] / target / linux / ramips / base-files / etc / hotplug.d / firmware / 10-rt2x00-eeprom
1 #!/bin/sh
2
3 rt2x00_eeprom_die() {
4 echo "rt2x00 eeprom: " "$*"
5 exit 1
6 }
7
8 rt2x00_eeprom_extract() {
9 local part=$1
10 local offset=$2
11 local count=$3
12 local mtd
13
14 . /etc/functions.sh
15
16 mtd=$(find_mtd_part $part)
17 [ -n "$mtd" ] || \
18 rt2x00_eeprom_die "no mtd device found for partition $part"
19
20 dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
21 rt2x00_eeprom_die "failed to extract from $mtd"
22 }
23
24 [ -e /lib/firmware/$FIRMWARE ] && exit 0
25
26 . /lib/ramips.sh
27
28 board=$(ramips_board_name)
29
30 case "$FIRMWARE" in
31 "RT288X.eeprom" | \
32 "RT305X.eeprom" | \
33 "RT3883.eeprom")
34 case $board in
35 dir-300-b1 | \
36 dir-600-b1 | \
37 dir-600-b2)
38 rt2x00_eeprom_extract "devdata" 16384 272
39 ;;
40
41 dap-1350)
42 rt2x00_eeprom_extract "devdata" 0 272
43 ;;
44
45 rt-n10-plus | \
46 rt-g32-b1)
47 rt2x00_eeprom_extract "devconf" 0 272
48 ;;
49
50 f5d8235-v1 | \
51 f5d8235-v2)
52 rt2x00_eeprom_extract "u-boot" 262144 272
53 ;;
54
55 3g-6200n | \
56 all0256n | \
57 all5002 | \
58 argus-atp52b | \
59 bc2 | \
60 esr-9753 | \
61 fonera20n | \
62 freestation5 | \
63 hw550-3g | \
64 mofi3500-3gn | \
65 pwh2004 | \
66 nbg-419n | \
67 nw718 | \
68 omni-emb | \
69 psr-680w | \
70 rt-n15 | \
71 rt-n56u | \
72 sl-r7205 | \
73 v11st-fe | \
74 v22rw-2x2 | \
75 w306r-v20 | \
76 w502u | \
77 wcr-150gn | \
78 whr-g300n | \
79 wl-330n | \
80 wl-330n3g | \
81 wl-351 | \
82 wli-tx4-ag300n | \
83 wr512-3gn | \
84 wr6202 | \
85 ur-336un | \
86 xdxrn502j)
87 rt2x00_eeprom_extract "factory" 0 272
88 ;;
89
90 wl341v3)
91 rt2x00_eeprom_extract "board-nvram" 64880 272
92 ;;
93
94 *)
95 rt2x00_eeprom_die "board $board is not supported yet"
96 ;;
97 esac
98 ;;
99
100 "rt2x00pci_1_0.eeprom")
101 case $board in
102 rt-n56u)
103 rt2x00_eeprom_extract "factory" 32768 272
104 ;;
105 esac
106 ;;
107 esac