target/linux/ramips/dts/MT7620a_V22SG.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Ralink MT7620a V22SG High Power evaluation board";
   8
   9         gpio-keys-polled {
  10                 compatible = "gpio-keys-polled";
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 poll-interval = <20>;
  14
  15                 reset {
  16                         label = "reset";
  17                         gpios = <&gpio0 1 1>;
  18                         linux,code = <0x198>;
  19                 };
  20
  21                 aoss {
  22                         label = "aoss";
  23                         gpios = <&gpio0 2 1>;
  24                         linux,code = <0x211>;
  25                 };
  26         };
  27
  28         nand {
  29                 #address-cells = <1>;
  30                 #size-cells = <1>;
  31                 compatible = "mtk,mt7620-nand";
  32
  33                 partition@0 {
  34                         label = "u-boot";
  35                         reg = <0x0 0x40000>;
  36                         read-only;
  37                 };
  38
  39                 partition@40000 {
  40                         label = "u-boot-env";
  41                         reg = <0x40000 0x20000>;
  42                         read-only;
  43                 };
  44
  45                 factory: partition@60000 {
  46                         label = "factory";
  47                         reg = <0x60000 0x20000>;
  48                         read-only;
  49                 };
  50
  51                 partition@80000 {
  52                         label = "firmware";
  53                         reg = <0x80000 0x7f80000>;
  54                 };
  55         };
  56 };
  57
  58 &pinctrl {
  59         state_default: pinctrl0 {
  60                 gpio {
  61                         ralink,group = "i2c", "uartf", "spi";
  62                         ralink,function = "gpio";
  63                 };
  64         };
  65 };
  66
  67 &ethernet {
  68         status = "okay";
  69         pinctrl-names = "default";
  70         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  71         mediatek,portmap = "llllw";
  72
  73         port@4 {
  74                 status = "okay";
  75                 phy-handle = <&phy4>;
  76                 phy-mode = "rgmii";
  77         };
  78
  79         port@5 {
  80                 status = "okay";
  81                 phy-handle = <&phy5>;
  82                 phy-mode = "rgmii";
  83         };
  84
  85         mdio-bus {
  86                 status = "okay";
  87
  88                 phy4: ethernet-phy@4 {
  89                         reg = <4>;
  90                         phy-mode = "rgmii";
  91                 };
  92
  93                 phy5: ethernet-phy@5 {
  94                         reg = <5>;
  95                         phy-mode = "rgmii";
  96                 };
  97         };
  98 };
  99
 100 &gsw {
 101         mediatek,port4 = "gmac";
 102 };
 103
 104 &pcie {
 105         status = "okay";
 106 };
 107
 108 &ehci {
 109         status = "okay";
 110 };
 111
 112 &ohci {
 113         status = "okay";
 114 };