#include <linux/wireless.h>
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
+#include <net/net_namespace.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "debugfs.h"
#include "debugfs_netdev.h"
+#define SUPP_MCS_SET_LEN 16
+
/*
* For seeing transmitted packets on monitor interfaces
* we have a radiotap header too.
/* common interface routines */
-static int header_parse_80211(struct sk_buff *skb, unsigned char *haddr)
+static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
{
memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
return ETH_ALEN;
new_flags |= FIF_ALLMULTI;
if (local->monitors)
- new_flags |= FIF_CONTROL |
- FIF_OTHER_BSS |
- FIF_BCN_PRBRESP_PROMISC;
+ new_flags |= FIF_BCN_PRBRESP_PROMISC;
+
+ if (local->fif_fcsfail)
+ new_flags |= FIF_FCSFAIL;
+
+ if (local->fif_plcpfail)
+ new_flags |= FIF_PLCPFAIL;
+
+ if (local->fif_control)
+ new_flags |= FIF_CONTROL;
+
+ if (local->fif_other_bss)
+ new_flags |= FIF_OTHER_BSS;
changed_flags = local->filter_flags ^ new_flags;
/*
* check whether it may have the same address
*/
- if (!identical_mac_addr_allowed(sdata->type,
- nsdata->type))
+ if (!identical_mac_addr_allowed(sdata->vif.type,
+ nsdata->vif.type))
return -ENOTUNIQ;
/*
* can only add VLANs to enabled APs
*/
- if (sdata->type == IEEE80211_IF_TYPE_VLAN &&
- nsdata->type == IEEE80211_IF_TYPE_AP &&
+ if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN &&
+ nsdata->vif.type == IEEE80211_IF_TYPE_AP &&
netif_running(nsdata->dev))
sdata->u.vlan.ap = nsdata;
}
}
- switch (sdata->type) {
+ switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_WDS:
if (is_zero_ether_addr(sdata->u.wds.remote_addr))
return -ENOLINK;
res = local->ops->start(local_to_hw(local));
if (res)
return res;
+ ieee80211_hw_config(local);
+ ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
- switch (sdata->type) {
+ switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_VLAN:
list_add(&sdata->u.vlan.list, &sdata->u.vlan.ap->u.ap.vlans);
/* no need to tell driver */
break;
case IEEE80211_IF_TYPE_MNTR:
+ if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+ local->cooked_mntrs++;
+ break;
+ }
+
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
- if (local->monitors == 1) {
- netif_tx_lock_bh(local->mdev);
- ieee80211_configure_filter(local);
- netif_tx_unlock_bh(local->mdev);
-
+ if (local->monitors == 1)
local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
- ieee80211_hw_config(local);
- }
+
+ if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+ local->fif_fcsfail++;
+ if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
+ local->fif_plcpfail++;
+ if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+ local->fif_control++;
+ if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
+ local->fif_other_bss++;
+
+ netif_tx_lock_bh(local->mdev);
+ ieee80211_configure_filter(local);
+ netif_tx_unlock_bh(local->mdev);
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
/* fall through */
default:
- conf.if_id = dev->ifindex;
- conf.type = sdata->type;
+ conf.vif = &sdata->vif;
+ conf.type = sdata->vif.type;
conf.mac_addr = dev->dev_addr;
res = local->ops->add_interface(local_to_hw(local), &conf);
if (res && !local->open_count && local->ops->stop)
ieee80211_reset_erp_info(dev);
ieee80211_enable_keys(sdata);
- if (sdata->type == IEEE80211_IF_TYPE_STA &&
+ if (sdata->vif.type == IEEE80211_IF_TYPE_STA &&
!(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
netif_carrier_off(dev);
else
tasklet_enable(&local->tasklet);
}
+ /*
+ * set_multicast_list will be invoked by the networking core
+ * which will check whether any increments here were done in
+ * error and sync them down to the hardware as filter flags.
+ */
+ if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+ atomic_inc(&local->iff_allmultis);
+
+ if (sdata->flags & IEEE80211_SDATA_PROMISC)
+ atomic_inc(&local->iff_promiscs);
+
local->open_count++;
netif_start_queue(dev);
struct ieee80211_sub_if_data *sdata;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_if_init_conf conf;
+ struct sta_info *sta;
+ int i;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ list_for_each_entry(sta, &local->sta_list, list) {
+ if (sta->dev == dev)
+ for (i = 0; i < STA_TID_NUM; i++)
+ ieee80211_sta_stop_rx_ba_session(sta->dev,
+ sta->addr, i,
+ WLAN_BACK_RECIPIENT,
+ WLAN_REASON_QSTA_LEAVE_QBSS);
+ }
+
netif_stop_queue(dev);
+ /*
+ * Don't count this interface for promisc/allmulti while it
+ * is down. dev_mc_unsync() will invoke set_multicast_list
+ * on the master interface which will sync these down to the
+ * hardware as filter flags.
+ */
+ if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
+ atomic_dec(&local->iff_allmultis);
+
+ if (sdata->flags & IEEE80211_SDATA_PROMISC)
+ atomic_dec(&local->iff_promiscs);
+
dev_mc_unsync(local->mdev, dev);
- /* down all dependent devices, that is VLANs */
- if (sdata->type == IEEE80211_IF_TYPE_AP) {
+ /* APs need special treatment */
+ if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
struct ieee80211_sub_if_data *vlan, *tmp;
+ struct beacon_data *old_beacon = sdata->u.ap.beacon;
+
+ /* remove beacon */
+ rcu_assign_pointer(sdata->u.ap.beacon, NULL);
+ synchronize_rcu();
+ kfree(old_beacon);
+ /* down all dependent devices, that is VLANs */
list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
u.vlan.list)
dev_close(vlan->dev);
local->open_count--;
- switch (sdata->type) {
+ switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_VLAN:
list_del(&sdata->u.vlan.list);
sdata->u.vlan.ap = NULL;
/* no need to tell driver */
break;
case IEEE80211_IF_TYPE_MNTR:
- local->monitors--;
- if (local->monitors == 0) {
- netif_tx_lock_bh(local->mdev);
- ieee80211_configure_filter(local);
- netif_tx_unlock_bh(local->mdev);
-
- local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
- ieee80211_hw_config(local);
+ if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
+ local->cooked_mntrs--;
+ break;
}
+
+ local->monitors--;
+ if (local->monitors == 0)
+ local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
+
+ if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
+ local->fif_fcsfail--;
+ if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
+ local->fif_plcpfail--;
+ if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
+ local->fif_control--;
+ if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
+ local->fif_other_bss--;
+
+ netif_tx_lock_bh(local->mdev);
+ ieee80211_configure_filter(local);
+ netif_tx_unlock_bh(local->mdev);
break;
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
synchronize_rcu();
skb_queue_purge(&sdata->u.sta.skb_queue);
- if (!local->ops->hw_scan &&
- local->scan_dev == sdata->dev) {
- local->sta_scanning = 0;
- cancel_delayed_work(&local->scan_work);
+ if (local->scan_dev == sdata->dev) {
+ if (!local->ops->hw_scan) {
+ local->sta_sw_scanning = 0;
+ cancel_delayed_work(&local->scan_work);
+ } else
+ local->sta_hw_scanning = 0;
}
+
flush_workqueue(local->hw.workqueue);
+
+ sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
+ kfree(sdata->u.sta.extra_ie);
+ sdata->u.sta.extra_ie = NULL;
+ sdata->u.sta.extra_ie_len = 0;
/* fall through */
default:
- conf.if_id = dev->ifindex;
- conf.type = sdata->type;
+ conf.vif = &sdata->vif;
+ conf.type = sdata->vif.type;
conf.mac_addr = dev->dev_addr;
/* disable all keys for as long as this netdev is down */
ieee80211_disable_keys(sdata);
if (local->ops->stop)
local->ops->stop(local_to_hw(local));
+ ieee80211_led_radio(local, 0);
+
tasklet_disable(&local->tx_pending_tasklet);
tasklet_disable(&local->tasklet);
}
return 0;
}
+int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct sta_info *sta;
+ struct ieee80211_sub_if_data *sdata;
+ u16 start_seq_num = 0;
+ u8 *state;
+ int ret;
+ DECLARE_MAC_BUF(mac);
+
+ if (tid >= STA_TID_NUM)
+ return -EINVAL;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "Open BA session requested for %s tid %u\n",
+ print_mac(mac, ra), tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+
+ sta = sta_info_get(local, ra);
+ if (!sta) {
+ printk(KERN_DEBUG "Could not find the station\n");
+ return -ENOENT;
+ }
+
+ spin_lock_bh(&sta->ampdu_mlme.ampdu_tx);
+
+ /* we have tried too many times, receiver does not want A-MPDU */
+ if (sta->ampdu_mlme.tid_tx[tid].addba_req_num > HT_AGG_MAX_RETRIES) {
+ ret = -EBUSY;
+ goto start_ba_exit;
+ }
+
+ state = &sta->ampdu_mlme.tid_tx[tid].state;
+ /* check if the TID is not in aggregation flow already */
+ if (*state != HT_AGG_STATE_IDLE) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "BA request denied - session is not "
+ "idle on tid %u\n", tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ ret = -EAGAIN;
+ goto start_ba_exit;
+ }
+
+ /* ensure that TX flow won't interrupt us
+ * until the end of the call to requeue function */
+ spin_lock_bh(&local->mdev->queue_lock);
+
+ /* create a new queue for this aggregation */
+ ret = ieee80211_ht_agg_queue_add(local, sta, tid);
+
+ /* case no queue is available to aggregation
+ * don't switch to aggregation */
+ if (ret) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "BA request denied - no queue available for"
+ " tid %d\n", tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ spin_unlock_bh(&local->mdev->queue_lock);
+ goto start_ba_exit;
+ }
+ sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
+
+ /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the
+ * call back right away, it must see that the flow has begun */
+ *state |= HT_ADDBA_REQUESTED_MSK;
+
+ if (local->ops->ampdu_action)
+ ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
+ ra, tid, &start_seq_num);
+
+ if (ret) {
+ /* No need to requeue the packets in the agg queue, since we
+ * held the tx lock: no packet could be enqueued to the newly
+ * allocated queue */
+ ieee80211_ht_agg_queue_remove(local, sta, tid, 0);
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "BA request denied - HW or queue unavailable"
+ " for tid %d\n", tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ spin_unlock_bh(&local->mdev->queue_lock);
+ *state = HT_AGG_STATE_IDLE;
+ goto start_ba_exit;
+ }
+
+ /* Will put all the packets in the new SW queue */
+ ieee80211_requeue(local, ieee802_1d_to_ac[tid]);
+ spin_unlock_bh(&local->mdev->queue_lock);
+
+ /* We have most probably almost emptied the legacy queue */
+ /* ieee80211_wake_queue(local_to_hw(local), ieee802_1d_to_ac[tid]); */
+
+ /* send an addBA request */
+ sta->ampdu_mlme.dialog_token_allocator++;
+ sta->ampdu_mlme.tid_tx[tid].dialog_token =
+ sta->ampdu_mlme.dialog_token_allocator;
+ sta->ampdu_mlme.tid_tx[tid].ssn = start_seq_num;
+
+ ieee80211_send_addba_request(sta->dev, ra, tid,
+ sta->ampdu_mlme.tid_tx[tid].dialog_token,
+ sta->ampdu_mlme.tid_tx[tid].ssn,
+ 0x40, 5000);
+
+ /* activate the timer for the recipient's addBA response */
+ sta->ampdu_mlme.tid_tx[tid].addba_resp_timer.expires =
+ jiffies + ADDBA_RESP_INTERVAL;
+ add_timer(&sta->ampdu_mlme.tid_tx[tid].addba_resp_timer);
+ printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
+
+start_ba_exit:
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx);
+ sta_info_put(sta);
+ return ret;
+}
+EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
+
+int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
+ u8 *ra, u16 tid,
+ enum ieee80211_back_parties initiator)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct sta_info *sta;
+ u8 *state;
+ int ret = 0;
+ DECLARE_MAC_BUF(mac);
+
+ if (tid >= STA_TID_NUM)
+ return -EINVAL;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "Stop a BA session requested for %s tid %u\n",
+ print_mac(mac, ra), tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+
+ sta = sta_info_get(local, ra);
+ if (!sta)
+ return -ENOENT;
+
+ /* check if the TID is in aggregation */
+ state = &sta->ampdu_mlme.tid_tx[tid].state;
+ spin_lock_bh(&sta->ampdu_mlme.ampdu_tx);
+
+ if (*state != HT_AGG_STATE_OPERATIONAL) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "Try to stop Tx aggregation on"
+ " non active TID\n");
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ ret = -ENOENT;
+ goto stop_BA_exit;
+ }
+
+ ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]);
+
+ *state = HT_AGG_STATE_REQ_STOP_BA_MSK |
+ (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
+
+ if (local->ops->ampdu_action)
+ ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP,
+ ra, tid, NULL);
+
+ /* case HW denied going back to legacy */
+ if (ret) {
+ WARN_ON(ret != -EBUSY);
+ *state = HT_AGG_STATE_OPERATIONAL;
+ ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
+ goto stop_BA_exit;
+ }
+
+stop_BA_exit:
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx);
+ sta_info_put(sta);
+ return ret;
+}
+EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
+
+void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct sta_info *sta;
+ u8 *state;
+ DECLARE_MAC_BUF(mac);
+
+ if (tid >= STA_TID_NUM) {
+ printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
+ tid, STA_TID_NUM);
+ return;
+ }
+
+ sta = sta_info_get(local, ra);
+ if (!sta) {
+ printk(KERN_DEBUG "Could not find station: %s\n",
+ print_mac(mac, ra));
+ return;
+ }
+
+ state = &sta->ampdu_mlme.tid_tx[tid].state;
+ spin_lock_bh(&sta->ampdu_mlme.ampdu_tx);
+
+ if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
+ printk(KERN_DEBUG "addBA was not requested yet, state is %d\n",
+ *state);
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx);
+ sta_info_put(sta);
+ return;
+ }
+
+ WARN_ON_ONCE(*state & HT_ADDBA_DRV_READY_MSK);
+
+ *state |= HT_ADDBA_DRV_READY_MSK;
+
+ if (*state == HT_AGG_STATE_OPERATIONAL) {
+ printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid);
+ ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
+ }
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx);
+ sta_info_put(sta);
+}
+EXPORT_SYMBOL(ieee80211_start_tx_ba_cb);
+
+void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct sta_info *sta;
+ u8 *state;
+ int agg_queue;
+ DECLARE_MAC_BUF(mac);
+
+ if (tid >= STA_TID_NUM) {
+ printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
+ tid, STA_TID_NUM);
+ return;
+ }
+
+ printk(KERN_DEBUG "Stop a BA session requested on DA %s tid %d\n",
+ print_mac(mac, ra), tid);
+
+ sta = sta_info_get(local, ra);
+ if (!sta) {
+ printk(KERN_DEBUG "Could not find station: %s\n",
+ print_mac(mac, ra));
+ return;
+ }
+ state = &sta->ampdu_mlme.tid_tx[tid].state;
+
+ spin_lock_bh(&sta->ampdu_mlme.ampdu_tx);
+ if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) {
+ printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n");
+ sta_info_put(sta);
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx);
+ return;
+ }
+
+ if (*state & HT_AGG_STATE_INITIATOR_MSK)
+ ieee80211_send_delba(sta->dev, ra, tid,
+ WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
+
+ agg_queue = sta->tid_to_tx_q[tid];
+
+ /* avoid ordering issues: we are the only one that can modify
+ * the content of the qdiscs */
+ spin_lock_bh(&local->mdev->queue_lock);
+ /* remove the queue for this aggregation */
+ ieee80211_ht_agg_queue_remove(local, sta, tid, 1);
+ spin_unlock_bh(&local->mdev->queue_lock);
+
+ /* we just requeued the all the frames that were in the removed
+ * queue, and since we might miss a softirq we do netif_schedule.
+ * ieee80211_wake_queue is not used here as this queue is not
+ * necessarily stopped */
+ netif_schedule(local->mdev);
+ *state = HT_AGG_STATE_IDLE;
+ sta->ampdu_mlme.tid_tx[tid].addba_req_num = 0;
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_tx);
+
+ sta_info_put(sta);
+}
+EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb);
+
+void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
+ const u8 *ra, u16 tid)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_ra_tid *ra_tid;
+ struct sk_buff *skb = dev_alloc_skb(0);
+
+ if (unlikely(!skb)) {
+ if (net_ratelimit())
+ printk(KERN_WARNING "%s: Not enough memory, "
+ "dropping start BA session", skb->dev->name);
+ return;
+ }
+ ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
+ memcpy(&ra_tid->ra, ra, ETH_ALEN);
+ ra_tid->tid = tid;
+
+ skb->pkt_type = IEEE80211_ADDBA_MSG;
+ skb_queue_tail(&local->skb_queue, skb);
+ tasklet_schedule(&local->tasklet);
+}
+EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
+
+void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
+ const u8 *ra, u16 tid)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_ra_tid *ra_tid;
+ struct sk_buff *skb = dev_alloc_skb(0);
+
+ if (unlikely(!skb)) {
+ if (net_ratelimit())
+ printk(KERN_WARNING "%s: Not enough memory, "
+ "dropping stop BA session", skb->dev->name);
+ return;
+ }
+ ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
+ memcpy(&ra_tid->ra, ra, ETH_ALEN);
+ ra_tid->tid = tid;
+
+ skb->pkt_type = IEEE80211_DELBA_MSG;
+ skb_queue_tail(&local->skb_queue, skb);
+ tasklet_schedule(&local->tasklet);
+}
+EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
+
static void ieee80211_set_multicast_list(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
allmulti = !!(dev->flags & IFF_ALLMULTI);
promisc = !!(dev->flags & IFF_PROMISC);
- sdata_allmulti = sdata->flags & IEEE80211_SDATA_ALLMULTI;
- sdata_promisc = sdata->flags & IEEE80211_SDATA_PROMISC;
+ sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
+ sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
if (allmulti != sdata_allmulti) {
if (dev->flags & IFF_ALLMULTI)
dev_mc_sync(local->mdev, dev);
}
+static const struct header_ops ieee80211_header_ops = {
+ .create = eth_header,
+ .parse = header_parse_80211,
+ .rebuild = eth_rebuild_header,
+ .cache = eth_header_cache,
+ .cache_update = eth_header_cache_update,
+};
+
/* Must not be called for mdev */
void ieee80211_if_setup(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
+ DECLARE_MAC_BUF(mac);
if (compare_ether_addr(remote_addr, sdata->u.wds.remote_addr) == 0)
return 0;
sta = sta_info_add(local, dev, remote_addr, GFP_KERNEL);
if (!sta)
return -ENOMEM;
+
+ sta->flags |= WLAN_STA_AUTHORIZED;
+
sta_info_put(sta);
/* Remove STA entry for the old peer */
sta_info_put(sta);
} else {
printk(KERN_DEBUG "%s: could not find STA entry for WDS link "
- "peer " MAC_FMT "\n",
- dev->name, MAC_ARG(sdata->u.wds.remote_addr));
+ "peer %s\n",
+ dev->name, print_mac(mac, sdata->u.wds.remote_addr));
}
/* Update WDS link data */
return 0;
memset(&conf, 0, sizeof(conf));
- conf.type = sdata->type;
- if (sdata->type == IEEE80211_IF_TYPE_STA ||
- sdata->type == IEEE80211_IF_TYPE_IBSS) {
+ conf.type = sdata->vif.type;
+ if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
+ sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
conf.bssid = sdata->u.sta.bssid;
conf.ssid = sdata->u.sta.ssid;
conf.ssid_len = sdata->u.sta.ssid_len;
- } else if (sdata->type == IEEE80211_IF_TYPE_AP) {
+ } else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
conf.ssid = sdata->u.ap.ssid;
conf.ssid_len = sdata->u.ap.ssid_len;
conf.beacon = beacon;
conf.beacon_control = control;
}
return local->ops->config_interface(local_to_hw(local),
- dev->ifindex, &conf);
+ &sdata->vif, &conf);
}
int ieee80211_if_config(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_control control;
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sk_buff *skb;
if (!(local->hw.flags & IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE))
return 0;
- skb = ieee80211_beacon_get(local_to_hw(local), dev->ifindex, &control);
+ skb = ieee80211_beacon_get(local_to_hw(local), &sdata->vif,
+ &control);
if (!skb)
return -ENOMEM;
return __ieee80211_if_config(dev, skb, &control);
int ieee80211_hw_config(struct ieee80211_local *local)
{
- struct ieee80211_hw_mode *mode;
struct ieee80211_channel *chan;
int ret = 0;
- if (local->sta_scanning) {
+ if (local->sta_sw_scanning)
chan = local->scan_channel;
- mode = local->scan_hw_mode;
- } else {
+ else
chan = local->oper_channel;
- mode = local->oper_hw_mode;
- }
- local->hw.conf.channel = chan->chan;
- local->hw.conf.channel_val = chan->val;
- if (!local->hw.conf.power_level) {
- local->hw.conf.power_level = chan->power_level;
- } else {
- local->hw.conf.power_level = min(chan->power_level,
- local->hw.conf.power_level);
- }
- local->hw.conf.freq = chan->freq;
- local->hw.conf.phymode = mode->mode;
- local->hw.conf.antenna_max = chan->antenna_max;
- local->hw.conf.chan = chan;
- local->hw.conf.mode = mode;
+ local->hw.conf.channel = chan;
+
+ if (!local->hw.conf.power_level)
+ local->hw.conf.power_level = chan->max_power;
+ else
+ local->hw.conf.power_level = min(chan->max_power,
+ local->hw.conf.power_level);
+
+ local->hw.conf.max_antenna_gain = chan->max_antenna_gain;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
- printk(KERN_DEBUG "HW CONFIG: channel=%d freq=%d "
- "phymode=%d\n", local->hw.conf.channel, local->hw.conf.freq,
- local->hw.conf.phymode);
-#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
+ printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
+ wiphy_name(local->hw.wiphy), chan->center_freq);
+#endif
if (local->open_count)
ret = local->ops->config(local_to_hw(local), &local->hw.conf);
return ret;
}
-void ieee80211_erp_info_change_notify(struct net_device *dev, u8 changes)
+/**
+ * ieee80211_hw_config_ht should be used only after legacy configuration
+ * has been determined, as ht configuration depends upon the hardware's
+ * HT abilities for a _specific_ band.
+ */
+int ieee80211_hw_config_ht(struct ieee80211_local *local, int enable_ht,
+ struct ieee80211_ht_info *req_ht_cap,
+ struct ieee80211_ht_bss_info *req_bss_cap)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
- struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- if (local->ops->erp_ie_changed)
- local->ops->erp_ie_changed(local_to_hw(local), changes,
- !!(sdata->flags & IEEE80211_SDATA_USE_PROTECTION),
- !(sdata->flags & IEEE80211_SDATA_SHORT_PREAMBLE));
+ struct ieee80211_conf *conf = &local->hw.conf;
+ struct ieee80211_supported_band *sband;
+ int i;
+
+ sband = local->hw.wiphy->bands[conf->channel->band];
+
+ /* HT is not supported */
+ if (!sband->ht_info.ht_supported) {
+ conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
+ return -EOPNOTSUPP;
+ }
+
+ /* disable HT */
+ if (!enable_ht) {
+ conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
+ } else {
+ conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
+ conf->ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap;
+ conf->ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS);
+ conf->ht_conf.cap |=
+ sband->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS;
+ conf->ht_bss_conf.primary_channel =
+ req_bss_cap->primary_channel;
+ conf->ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
+ conf->ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
+ for (i = 0; i < SUPP_MCS_SET_LEN; i++)
+ conf->ht_conf.supp_mcs_set[i] =
+ sband->ht_info.supp_mcs_set[i] &
+ req_ht_cap->supp_mcs_set[i];
+
+ /* In STA mode, this gives us indication
+ * to the AP's mode of operation */
+ conf->ht_conf.ht_supported = 1;
+ conf->ht_conf.ampdu_factor = req_ht_cap->ampdu_factor;
+ conf->ht_conf.ampdu_density = req_ht_cap->ampdu_density;
+ }
+
+ local->ops->conf_ht(local_to_hw(local), &local->hw.conf);
+
+ return 0;
+}
+
+void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
+ u32 changed)
+{
+ struct ieee80211_local *local = sdata->local;
+
+ if (!changed)
+ return;
+
+ if (local->ops->bss_info_changed)
+ local->ops->bss_info_changed(local_to_hw(local),
+ &sdata->vif,
+ &sdata->bss_conf,
+ changed);
}
void ieee80211_reset_erp_info(struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
- sdata->flags &= ~(IEEE80211_SDATA_USE_PROTECTION |
- IEEE80211_SDATA_SHORT_PREAMBLE);
- ieee80211_erp_info_change_notify(dev,
- IEEE80211_ERP_CHANGE_PROTECTION |
- IEEE80211_ERP_CHANGE_PREAMBLE);
+ sdata->bss_conf.use_cts_prot = 0;
+ sdata->bss_conf.use_short_preamble = 0;
+ ieee80211_bss_info_change_notify(sdata,
+ BSS_CHANGED_ERP_CTS_PROT |
+ BSS_CHANGED_ERP_PREAMBLE);
}
void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
struct sk_buff *skb;
struct ieee80211_rx_status rx_status;
struct ieee80211_tx_status *tx_status;
+ struct ieee80211_ra_tid *ra_tid;
while ((skb = skb_dequeue(&local->skb_queue)) ||
(skb = skb_dequeue(&local->skb_queue_unreliable))) {
case IEEE80211_RX_MSG:
/* status is in skb->cb */
memcpy(&rx_status, skb->cb, sizeof(rx_status));
- /* Clear skb->type in order to not confuse kernel
+ /* Clear skb->pkt_type in order to not confuse kernel
* netstack. */
skb->pkt_type = 0;
__ieee80211_rx(local_to_hw(local), skb, &rx_status);
skb, tx_status);
kfree(tx_status);
break;
+ case IEEE80211_DELBA_MSG:
+ ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
+ ieee80211_stop_tx_ba_cb(local_to_hw(local),
+ ra_tid->ra, ra_tid->tid);
+ dev_kfree_skb(skb);
+ break;
+ case IEEE80211_ADDBA_MSG:
+ ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
+ ieee80211_start_tx_ba_cb(local_to_hw(local),
+ ra_tid->ra, ra_tid->tid);
+ dev_kfree_skb(skb);
+ break ;
default: /* should never get here! */
printk(KERN_ERR "%s: Unknown message type (%d)\n",
wiphy_name(local->hw.wiphy), skb->pkt_type);
struct ieee80211_tx_packet_data *pkt_data;
pkt_data = (struct ieee80211_tx_packet_data *)skb->cb;
- pkt_data->ifindex = control->ifindex;
+ pkt_data->ifindex = vif_to_sdata(control->vif)->dev->ifindex;
pkt_data->flags = 0;
if (control->flags & IEEE80211_TXCTL_REQ_TX_STATUS)
pkt_data->flags |= IEEE80211_TXPD_REQ_TX_STATUS;
pkt_data->flags |= IEEE80211_TXPD_DO_NOT_ENCRYPT;
if (control->flags & IEEE80211_TXCTL_REQUEUE)
pkt_data->flags |= IEEE80211_TXPD_REQUEUE;
+ if (control->flags & IEEE80211_TXCTL_EAPOL_FRAME)
+ pkt_data->flags |= IEEE80211_TXPD_EAPOL_FRAME;
pkt_data->queue = control->queue;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
u16 frag, type;
struct ieee80211_tx_status_rtap_hdr *rthdr;
struct ieee80211_sub_if_data *sdata;
- int monitors;
+ struct net_device *prev_dev = NULL;
if (!status) {
printk(KERN_ERR
sta_info_put(sta);
return;
}
- } else {
- /* FIXME: STUPID to call this with both local and local->mdev */
- rate_control_tx_status(local, local->mdev, skb, status);
- }
+ } else
+ rate_control_tx_status(local->mdev, skb, status);
ieee80211_led_tx(local, 0);
/* this was a transmitted frame, but now we want to reuse it */
skb_orphan(skb);
- if (!local->monitors) {
+ /*
+ * This is a bit racy but we can avoid a lot of work
+ * with this test...
+ */
+ if (!local->monitors && !local->cooked_mntrs) {
dev_kfree_skb(skb);
return;
}
rthdr->data_retries = status->retry_count;
+ /* XXX: is this sufficient for BPF? */
+ skb_set_mac_header(skb, 0);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = htons(ETH_P_802_2);
+ memset(skb->cb, 0, sizeof(skb->cb));
+
rcu_read_lock();
- monitors = local->monitors;
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
- /*
- * Using the monitors counter is possibly racy, but
- * if the value is wrong we simply either clone the skb
- * once too much or forget sending it to one monitor iface
- * The latter case isn't nice but fixing the race is much
- * more complicated.
- */
- if (!monitors || !skb)
- goto out;
-
- if (sdata->type == IEEE80211_IF_TYPE_MNTR) {
+ if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) {
if (!netif_running(sdata->dev))
continue;
- monitors--;
- if (monitors)
+
+ if (prev_dev) {
skb2 = skb_clone(skb, GFP_ATOMIC);
- else
- skb2 = NULL;
- skb->dev = sdata->dev;
- /* XXX: is this sufficient for BPF? */
- skb_set_mac_header(skb, 0);
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- skb->pkt_type = PACKET_OTHERHOST;
- skb->protocol = htons(ETH_P_802_2);
- memset(skb->cb, 0, sizeof(skb->cb));
- netif_rx(skb);
- skb = skb2;
+ if (skb2) {
+ skb2->dev = prev_dev;
+ netif_rx(skb2);
+ }
+ }
+
+ prev_dev = sdata->dev;
}
}
- out:
+ if (prev_dev) {
+ skb->dev = prev_dev;
+ netif_rx(skb);
+ skb = NULL;
+ }
rcu_read_unlock();
- if (skb)
- dev_kfree_skb(skb);
+ dev_kfree_skb(skb);
}
EXPORT_SYMBOL(ieee80211_tx_status);
local->hw.queues = 1; /* default */
local->mdev = mdev;
- local->rx_pre_handlers = ieee80211_rx_pre_handlers;
- local->rx_handlers = ieee80211_rx_handlers;
- local->tx_handlers = ieee80211_tx_handlers;
local->bridge_packets = 1;
local->long_retry_limit = 4;
local->hw.conf.radio_enabled = 1;
- local->enabled_modes = ~0;
-
- INIT_LIST_HEAD(&local->modes_list);
-
INIT_LIST_HEAD(&local->interfaces);
INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work);
mdev->open = ieee80211_master_open;
mdev->stop = ieee80211_master_stop;
mdev->type = ARPHRD_IEEE80211;
- mdev->hard_header_parse = header_parse_80211;
+ mdev->header_ops = &ieee80211_header_ops;
mdev->set_multicast_list = ieee80211_master_set_multicast_list;
- sdata->type = IEEE80211_IF_TYPE_AP;
+ sdata->vif.type = IEEE80211_IF_TYPE_AP;
sdata->dev = mdev;
sdata->local = local;
sdata->u.ap.force_unicast_rateidx = -1;
struct ieee80211_local *local = hw_to_local(hw);
const char *name;
int result;
+ enum ieee80211_band band;
+
+ /*
+ * generic code guarantees at least one band,
+ * set this very early because much code assumes
+ * that hw.conf.channel is assigned
+ */
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ struct ieee80211_supported_band *sband;
+
+ sband = local->hw.wiphy->bands[band];
+ if (sband) {
+ /* init channel we're on */
+ local->hw.conf.channel =
+ local->oper_channel =
+ local->scan_channel = &sband->channels[0];
+ break;
+ }
+ }
result = wiphy_register(local->hw.wiphy);
if (result < 0)
ieee80211_debugfs_add_netdev(IEEE80211_DEV_TO_SUB_IF(local->mdev));
ieee80211_if_set_type(local->mdev, IEEE80211_IF_TYPE_AP);
- result = ieee80211_init_rate_ctrl_alg(local, NULL);
+ result = ieee80211_init_rate_ctrl_alg(local,
+ hw->rate_control_algorithm);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize rate control "
"algorithm\n", wiphy_name(local->hw.wiphy));
}
EXPORT_SYMBOL(ieee80211_register_hw);
-int ieee80211_register_hwmode(struct ieee80211_hw *hw,
- struct ieee80211_hw_mode *mode)
-{
- struct ieee80211_local *local = hw_to_local(hw);
- struct ieee80211_rate *rate;
- int i;
-
- INIT_LIST_HEAD(&mode->list);
- list_add_tail(&mode->list, &local->modes_list);
-
- local->hw_modes |= (1 << mode->mode);
- for (i = 0; i < mode->num_rates; i++) {
- rate = &(mode->rates[i]);
- rate->rate_inv = CHAN_UTIL_RATE_LCM / rate->rate;
- }
- ieee80211_prepare_rates(local, mode);
-
- if (!local->oper_hw_mode) {
- /* Default to this mode */
- local->hw.conf.phymode = mode->mode;
- local->oper_hw_mode = local->scan_hw_mode = mode;
- local->oper_channel = local->scan_channel = &mode->channels[0];
- local->hw.conf.mode = local->oper_hw_mode;
- local->hw.conf.chan = local->oper_channel;
- }
-
- if (!(hw->flags & IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED))
- ieee80211_set_default_regdomain(mode);
-
- return 0;
-}
-EXPORT_SYMBOL(ieee80211_register_hwmode);
-
void ieee80211_unregister_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata, *tmp;
- int i;
tasklet_kill(&local->tx_pending_tasklet);
tasklet_kill(&local->tasklet);
rate_control_deinitialize(local);
debugfs_hw_del(local);
- for (i = 0; i < NUM_IEEE80211_MODES; i++) {
- kfree(local->supp_rates[i]);
- kfree(local->basic_rates[i]);
- }
-
if (skb_queue_len(&local->skb_queue)
|| skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
BUILD_BUG_ON(sizeof(struct ieee80211_tx_packet_data) > sizeof(skb->cb));
+ ret = rc80211_simple_init();
+ if (ret)
+ goto out;
+
+ ret = rc80211_pid_init();
+ if (ret)
+ goto out_cleanup_simple;
+
ret = ieee80211_wme_register();
if (ret) {
printk(KERN_DEBUG "ieee80211_init: failed to "
"initialize WME (err=%d)\n", ret);
- return ret;
+ goto out_cleanup_pid;
}
ieee80211_debugfs_netdev_init();
- ieee80211_regdomain_init();
return 0;
+
+ out_cleanup_pid:
+ rc80211_pid_exit();
+ out_cleanup_simple:
+ rc80211_simple_exit();
+ out:
+ return ret;
}
static void __exit ieee80211_exit(void)
{
+ rc80211_simple_exit();
+ rc80211_pid_exit();
+
ieee80211_wme_unregister();
ieee80211_debugfs_netdev_exit();
}
projects / openwrt / staging / lynxis / omap.git / blobdiff