brcm2708: update linux 4.4 patches to latest version

[openwrt/staging/lynxis/omap.git] / target / linux / brcm2708 / image / config.txt

diff --git a/target/linux/brcm2708/image/config.txt b/target/linux/brcm2708/image/config.txt
index 1fb880f9be59b072be7dac33b196905c63060132..23adf276755dd485ac100acf44dd024c83920418 100644 (file)
--- a/target/linux/brcm2708/image/config.txt
+++ b/target/linux/brcm2708/image/config.txt
@@ -476,7 +476,14 @@
 ##     Stop start.elf from filling in ATAGS (memory from 0x100) before
 ##     launching kernel
 ##
-disable_commandline_tags=1
+#disable_commandline_tags=2
+
+## enable_uart
+##     Enables or disables uart pin multiplexing
+##     Raspberry Pi 1/2: if unset, uart is enabled by default
+##     Raspberry Pi 3: if unset uart is disabled by default
+##
+enable_uart=1
 
 ## cmdline (string)
 ##     Command line parameters. Can be used instead of cmdline.txt file
@@ -491,7 +498,7 @@ disable_commandline_tags=1
 ## kernel_address
 ##     Address to load kernel.img file at
 ##
-kernel_address=0x8000
+#kernel_address=0x8000
 
 ## ramfsfile (string)
 ##     ramfs file to load
@@ -515,21 +522,21 @@ kernel_address=0x8000
 ## device_tree_address
 ##     Address to load device_tree at
 ##
-device_tree_address=0x100
+#device_tree_address=0x100
 
 ## init_uart_baud
 ##     Initial uart baud rate.
 ##
 ##     Default 115200
 ##
-init_uart_baud=115200
+#init_uart_baud=115200
 
 ## init_uart_clock
 ##     Initial uart clock.
 ##
 ##     Default 3000000 (3MHz)
 ##
-init_uart_clock=3000000
+#init_uart_clock=3000000
 
 ## init_emmc_clock
 ##     Initial emmc clock, increasing this can speedup your SD-card.
@@ -926,13 +933,26 @@ init_uart_clock=3000000
 ##  Device Tree Settings
 ################################################################################
 
-dtparam=random=on,watchdog=on,audio=on,i2c0=on,i2c1=on,spi=on
-
-#dtoverlay=hifiberry-amp-overlay
-#dtoverlay=hifiberry-dac-overlay
-#dtoverlay=hifiberry-dacplus-overlay
-#dtoverlay=hifiberry-digi-overlay
-#dtoverlay=iqaudio-dac-overlay
-#dtoverlay=iqaudio-dacplus-overlay
-#dtoverlay=raspidac3-overlay
-#dtoverlay=rpi-proto-overlay
+dtparam=random=on
+dtparam=watchdog=on
+dtparam=audio=on
+dtparam=i2c0=on
+dtparam=i2c1=on
+dtparam=spi=on
+
+#dtoverlay=adau1977-adc
+#dtoverlay=audioinjector-wm8731-audio
+#dtoverlay=dionaudio-loco
+#dtoverlay=hifiberry-amp
+#dtoverlay=hifiberry-dac
+#dtoverlay=hifiberry-dacplus
+#dtoverlay=hifiberry-digi
+#dtoverlay=iqaudio-dac
+#dtoverlay=iqaudio-dacplus
+#dtoverlay=iqaudio-digi-wm8804-audio
+#dtoverlay=justboom-dac
+#dtoverlay=justboom-digi
+#dtoverlay=raspidac3
+#dtoverlay=rpi-dac
+#dtoverlay=rpi-proto
+#dtoverlay=rra-digidac1-wm8741-audio