ramips: remove duplicate i2c dts info

[openwrt/staging/lynxis/omap.git] / target / linux / ramips / dts / W306R_V20.dts

diff --git a/target/linux/ramips/dts/W306R_V20.dts b/target/linux/ramips/dts/W306R_V20.dts
index 1c2cf6af88abd373b0f785c07d328a316f4208b5..79ae23dd632969f5103243cb17315361945b75bc 100644 (file)
--- a/target/linux/ramips/dts/W306R_V20.dts
+++ b/target/linux/ramips/dts/W306R_V20.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
 / {
        compatible = "W306R_V20", "ralink,rt3052-soc";
@@ -9,7 +9,6 @@
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -39,33 +38,14 @@
                };
        };
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
-
-       esw@10110000 {
-               ralink,portmap = <0x3e>;
-       };
-
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
+
                sys {
                        label = "w306r-v20:green:sys";
                        gpios = <&gpio0 9 1>;
                };
+
                wps {
                        label = "w306r-v20:green:wps";
                        gpios = <&gpio0 13 1>;
@@ -77,6 +57,7 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "RESET/WPS";
                        gpios = <&gpio0 10 1>;
@@ -84,3 +65,24 @@
                };
        };
 };
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+       mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};