ramips: cleanup ZBT-WG3526.dtsi

- replace magic numbers with GPIO_* constants
- replace generic PCI definitions with correct vendor and
  device identification

Signed-off-by: Dominik Menke <dom@digineo.de>

diff --git a/target/linux/ramips/dts/ZBT-WG3526.dtsi b/target/linux/ramips/dts/ZBT-WG3526.dtsi
index 6e82d253989ae73d40f8d4c81237271f038eed02..1a4b9d6d21996861dce38c90daa7bdca83d86543 100644 (file)
--- a/target/linux/ramips/dts/ZBT-WG3526.dtsi
+++ b/target/linux/ramips/dts/ZBT-WG3526.dtsi
@@ -1,5 +1,6 @@
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -26,7 +27,7 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 18 1>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -52,7 +53,6 @@
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80";
                spi-max-frequency = <10000000>;
 
                partition@0 {
@@ -83,18 +83,18 @@
        status = "okay";
 
        pcie0 {
-               mt76@0,0 {
+               wifi@14c3,7603 {
+                       compatible = "pci14c3,7603";
                        reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x0000>;
                        mediatek,5ghz = <0>;
                };
        };
 
        pcie1 {
-               mt76@1,0 {
+               wifi@14c3,7662 {
+                       compatible = "pci14c3,7662";
                        reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
                        mediatek,mtd-eeprom = <&factory 0x8000>;
                        mediatek,2ghz = <0>;
                };