--- /dev/null
+From 93d2b52fe73294d59bbce3a6d4da031647b1f3b2 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Tue, 22 Oct 2013 15:56:40 -0700
+Subject: [PATCH] PCI: imx6: remove outbound io/mem ATU region mapping
+
+The IMX6 iATU is used for address translation between the AXI bus
+address space and PCI address space. This is used for type0 and type1
+config cycles but is not necessary for outbound io/mem regions.
+
+This patch removes the calls that inappropriately re-configures the ATU
+viewport for outbound memory and IO after config cycles and removes them
+altogether as they are not necessary.
+
+This resolves issues with PCI devices behind switches and has been tested with
+a Gige device behind a PLX PEX860x switch.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/pci/host/pcie-designware.c | 41 +++---------------------------------
+ 1 file changed, 3 insertions(+), 38 deletions(-)
+
+--- a/drivers/pci/host/pcie-designware.c
++++ b/drivers/pci/host/pcie-designware.c
+@@ -43,7 +43,6 @@
+ #define PCIE_ATU_VIEWPORT 0x900
+ #define PCIE_ATU_REGION_INBOUND (0x1 << 31)
+ #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
+-#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
+ #define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
+ #define PCIE_ATU_CR1 0x904
+ #define PCIE_ATU_TYPE_MEM (0x0 << 0)
+@@ -264,8 +263,8 @@ static void dw_pcie_prog_viewport_cfg0(s
+
+ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
+ {
+- /* Program viewport 1 : OUTBOUND : CFG1 */
+- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
++ /* Program viewport 0 : OUTBOUND : CFG1 */
++ dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
+ PCIE_ATU_VIEWPORT);
+ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
+ dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+@@ -275,38 +274,8 @@ static void dw_pcie_prog_viewport_cfg1(s
+ PCIE_ATU_LIMIT);
+ dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
+ dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
+-}
+-
+-static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
+-{
+- /* Program viewport 0 : OUTBOUND : MEM */
+- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
+- PCIE_ATU_VIEWPORT);
+- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
+- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+- dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
+- dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
+- dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
+- PCIE_ATU_LIMIT);
+- dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
+- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
+- PCIE_ATU_UPPER_TARGET);
+-}
+-
+-static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
+-{
+- /* Program viewport 1 : OUTBOUND : IO */
+- dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
+- PCIE_ATU_VIEWPORT);
+- dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
++ dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
+ dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
+- dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
+- dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
+- dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
+- PCIE_ATU_LIMIT);
+- dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
+- dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
+- PCIE_ATU_UPPER_TARGET);
+ }
+
+ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
+@@ -322,11 +291,9 @@ static int dw_pcie_rd_other_conf(struct
+ if (bus->parent->number == pp->root_bus_nr) {
+ dw_pcie_prog_viewport_cfg0(pp, busdev);
+ ret = cfg_read(pp->va_cfg0_base + address, where, size, val);
+- dw_pcie_prog_viewport_mem_outbound(pp);
+ } else {
+ dw_pcie_prog_viewport_cfg1(pp, busdev);
+ ret = cfg_read(pp->va_cfg1_base + address, where, size, val);
+- dw_pcie_prog_viewport_io_outbound(pp);
+ }
+
+ return ret;
+@@ -345,11 +312,9 @@ static int dw_pcie_wr_other_conf(struct
+ if (bus->parent->number == pp->root_bus_nr) {
+ dw_pcie_prog_viewport_cfg0(pp, busdev);
+ ret = cfg_write(pp->va_cfg0_base + address, where, size, val);
+- dw_pcie_prog_viewport_mem_outbound(pp);
+ } else {
+ dw_pcie_prog_viewport_cfg1(pp, busdev);
+ ret = cfg_write(pp->va_cfg1_base + address, where, size, val);
+- dw_pcie_prog_viewport_io_outbound(pp);
+ }
+
+ return ret;
--- /dev/null
+From 8590081d5328fe59d4f72aaadafb47fb91d8dc7c Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 17 Oct 2013 15:52:16 -0700
+Subject: [PATCH] PCI: imx6: fix imprecise abort handler
+
+An imprecise abort is triggered when a port behind a switch is accessed
+and no device is present. At enumeration, imprecise aborts are not enabled
+thus this ends up getting deferred until the kernel has completed init. At
+that point we must not adjust PC - the handler must do nothing, but a handler
+must exist.
+
+This fixes random crashes that occur right after freeing init.
+This is against linux-pci/host-imx6.
+
+Acked-by: Marek Vasut <marex@denx.de>
+Tested-by: Marek Vasut <marex@denx.de>
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/pci/host/pci-imx6.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/pci/host/pci-imx6.c
++++ b/drivers/pci/host/pci-imx6.c
+@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *
+ static int imx6q_pcie_abort_handler(unsigned long addr,
+ unsigned int fsr, struct pt_regs *regs)
+ {
+- /*
+- * If it was an imprecise abort, then we need to correct the
+- * return address to be _after_ the instruction.
+- */
+- if (fsr & (1 << 10))
+- regs->ARM_pc += 4;
+ return 0;
+ }
+
projects / openwrt / staging / lynxis / omap.git / commitdiff