ramips: add support for Planex CS-QR10
authorJohn Crispin <john@openwrt.org>
Tue, 26 Apr 2016 11:43:01 +0000 (11:43 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 26 Apr 2016 11:43:01 +0000 (11:43 +0000)
CS-QR10 is MT7620A based IP Camera.

the camera and sound does not work with kernel 4.4.
 - camera chip is sn9c291.
 - sound chip is wm8960.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 49234

target/linux/ramips/base-files/etc/board.d/01_leds
target/linux/ramips/base-files/etc/board.d/02_network
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/base-files/lib/upgrade/platform.sh
target/linux/ramips/dts/CS-QR10.dts [new file with mode: 0644]
target/linux/ramips/image/mt7620.mk
target/linux/ramips/mt7620/profiles/planex.mk

index e3b8500d373bc91a6aa1caed4bdb4aa81fc09ea3..367801d29c6f10dedc851b945a13d8b0bf08c4ea 100755 (executable)
@@ -30,7 +30,8 @@ br-6475nd|\
 mzk-w300nh2)
        set_wifi_led "$board:amber:wlan"
        ;;
-a5-v11)
+a5-v11|\
+cs-qr10)
        ucidef_set_led_default "power" "POWER" "$board:red:power" "1"
        ;;
 ai-br100)
index 3c958ae06b69ef06bc4cb6abe8f61ede5ed756f3..dc3d1bc2ad36371f4396ae4f5f8248833857281e 100755 (executable)
@@ -160,6 +160,7 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
                ;;
+       cs-qr10|\
        d105|\
        hpm|\
        na930|\
index bd0ff05c72909b8a0f92f45633502859c822a85f..2d43f54fbb23380366640bd2b6aa18f3fbff2b45 100644 (file)
@@ -33,6 +33,7 @@ get_status_led() {
                status_led="$board:green:power"
                ;;
        a5-v11|\
+       cs-qr10|\
        d105|\
        dcs-930l-b1|\
        ex2700|\
index 550ec55cd2c96bf9969b642b219c3ce9a18c5e6c..73dd599605ed50629dae18781843db0152b4fb58 100755 (executable)
@@ -88,6 +88,9 @@ ramips_board_detect() {
        *"CF-WR800N")
                name="cf-wr800n"
                ;;
+       *"CS-QR10")
+               name="cs-qr10"
+               ;;
        *"CY-SWR1100")
                name="cy-swr1100"
                ;;
index 73ba6e61b529a1d3bbda4c1b4f7bdb856493bd60..f153b0289ef879302739346f04ab89f2578d1c69 100755 (executable)
@@ -34,6 +34,7 @@ platform_check_image() {
        broadway|\
        carambola|\
        cf-wr800n|\
+       cs-qr10|\
        d105|\
        dap-1350|\
        db-wrt01|\
diff --git a/target/linux/ramips/dts/CS-QR10.dts b/target/linux/ramips/dts/CS-QR10.dts
new file mode 100644 (file)
index 0000000..08299e3
--- /dev/null
@@ -0,0 +1,163 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-soc";
+       model = "Planex CS-QR10";
+
+       palmbus@10000000 {
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               gpio1: gpio@638 {
+                       status = "okay";
+               };
+
+               gpio2: gpio@660 {
+                       status = "okay";
+               };
+
+               gpio3: gpio@688 {
+                       status = "okay";
+               };
+
+               i2c@900 {
+                       status = "okay";
+               };
+
+               i2s: i2s@a00 {
+                       status = "okay";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pcm_i2s_pins>;
+               };
+
+               spi@b00 {
+                       status = "okay";
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "jedec,spi-nor";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l6405d";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x7b0000>;
+                               };
+                       };
+               };
+
+               pcm@2000 {
+                       status = "okay";
+               };
+
+               gdma@2800 {
+                       status = "okay";
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi refclk", "rgmii1";
+                               ralink,function = "gpio";
+                       };
+                       wdt {
+                               ralink,group = "wdt";
+                               ralink,function = "wdt refclk";
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&ephy_pins>;
+               mtd-mac-address = <&factory 0x4>;
+               mediatek,portmap = "llllw";
+       };
+
+       gsw@10110000 {
+               ralink,port4 = "ephy";
+       };
+
+       sdhci@10130000 {
+               status = "okay";
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+
+       wmac@10180000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
+       pcie@10140000 {
+               status = "okay";
+       };
+
+       sound {
+               compatible = "mediatek,mt7620-audio-wm8960";
+               model = "mt7620-wm8960";
+               i2s-controller = <&i2s>;
+               audio-routing =
+               "Ext Spk", "SPK_LP",
+               "Ext Spk", "SPK_LN",
+               "Ext Spk", "SPK_RP",
+               "Ext Spk", "SPK_RN";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "cs-qr10:red:power";
+                       gpios = <&gpio1 4 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               s1 {
+                       label = "reset";
+                       gpios = <&gpio1 1 1>;
+                       linux,code = <0x198>;
+               };
+
+               s2 {
+                       label = "wps";
+                       gpios = <&gpio1 3 1>;
+                       linux,code = <0x211>;
+               };
+       };
+};
index c76e98e80974bc48d156d5c6228632ff4833d32f..d7421514015269ea5439c9a7d3dd2b65d2799e83 100644 (file)
@@ -95,6 +95,7 @@ whr_1166d_mtd_size=15400960
 Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166d_mtd_size))
 dlink810l_mtd_size=6881280
 Image/Build/Profile/CF-WR800N=$(call BuildFirmware/Default8M/$(1),$(1),cf-wr800n,CF-WR800N)
+Image/Build/Profile/CS-QR10=$(call BuildFirmware/Default8M/$(1),$(1),cs-qr10,CS-QR10)
 Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
 na930_mtd_size=20971520
 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
@@ -138,6 +139,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/MT7620a_V22SG,$(1))
        $(call Image/Build/Profile/AI-BR100,$(1))
        $(call Image/Build/Profile/CF-WR800N,$(1))
+       $(call Image/Build/Profile/CS-QR10,$(1))
        $(call Image/Build/Profile/RP-N53,$(1))
        $(call Image/Build/Profile/DIR-810L,$(1))
        $(call Image/Build/Profile/WHR300HP2,$(1))
index f6f2cf187cb964c2ce1385ae69ed263f13f7f4c0..15560ab50df613cda998e51a2db22447bf5f7ea0 100644 (file)
@@ -5,6 +5,20 @@
 # See /LICENSE for more information.
 #
 
+define Profile/CS-QR10
+       NAME:=Planex CS-QR10
+       PACKAGES:=\
+               kmod-usb-core kmod-usb2 kmod-usb-ohci \
+               i2c-core kmod-i2c-ralink kmod-sound-core kmod-sound-mtk \
+               kmod-sdhci-mt7620
+endef
+
+define Profile/CS-QR10/Description
+       Package set optimized for the Planex CS-QR10.
+endef
+$(eval $(call Profile,CS-QR10))
+
+
 define Profile/MZK-750DHP
        NAME:=Planex MZK-750DHP
        PACKAGES:= kmod-mt76 kmod-mt7610e