add rb532 support
[openwrt/staging/mkresin.git] / openwrt / target / linux / rb532-2.6 / patches / 210-pci_fixes.patch
1 diff -urN linux.old/drivers/pci/probe.c linux.dev/drivers/pci/probe.c
2 --- linux.old/drivers/pci/probe.c 2006-06-08 20:21:20.000000000 +0200
3 +++ linux.dev/drivers/pci/probe.c 2006-06-08 20:19:40.000000000 +0200
4 @@ -760,15 +760,22 @@
5 u32 l;
6 u8 hdr_type;
7 int delay = 1;
8 -
9 - if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
10 - return NULL;
11 -
12 - /* some broken boards return 0 or ~0 if a slot is empty: */
13 - if (l == 0xffffffff || l == 0x00000000 ||
14 - l == 0x0000ffff || l == 0xffff0000)
15 - return NULL;
16 -
17 + do {
18 + if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l))
19 + return NULL;
20 + /* some broken boards return 0 or ~0 if a slot is empty: */
21 + if (l == 0xffffffff || l == 0x00000000 ||
22 + l == 0x0000ffff || l == 0xffff0000){
23 + if (delay > 4)
24 + return NULL;
25 + /* But that could also be the previous dev not settled */
26 + pr_debug("PCI: retrying scan at 0x%x, because config is 0x%x\n",devfn,l);
27 + msleep(delay);
28 + delay *=2;
29 + l=0;
30 + }
31 + }while (l==0);
32 +
33 /* Configuration request Retry Status */
34 while (l == 0xffff0001) {
35 msleep(delay);
36 @@ -903,7 +910,10 @@
37
38 /* Go find them, Rover! */
39 for (devfn = 0; devfn < 0x100; devfn += 8)
40 + {
41 + if (bus->number == 0 && (devfn >> 3) > 21) break;
42 pci_scan_slot(bus, devfn);
43 + }
44
45 /*
46 * After performing arch-dependent fixup of the bus, look behind