build: add new option to add disabled feeds commented out to opkg.conf
[openwrt/staging/mkresin.git] / package / base-files / image-config.in
1 # Copyright (C) 2006-2012 OpenWrt.org
2 # Copyright (C) 2010 Vertical Communications
3 #
4 # This is free software, licensed under the GNU General Public License v2.
5 # See /LICENSE for more information.
6 #
7
8 menuconfig PREINITOPT
9 bool "Preinit configuration options" if IMAGEOPT
10 default n
11 help
12 These options are used to control the environment used to initialize
13 the system before running init (which typically mean /sbin/init which
14 switches to multiuser mode).
15
16 config TARGET_PREINIT_SUPPRESS_STDERR
17 bool "Suppress stderr messages during preinit" if PREINITOPT
18 default y
19 help
20 Sends stderr to null during preinit. This is the default behaviour
21 in previous versions of OpenWRT. This also prevents init process
22 itself from displaying stderr, however processes launched by init
23 in multiuser through inittab will use the current terminal (e.g.
24 the ash shell launched by inittab will display stderr). That's
25 the same behaviour as seen in previous version of OpenWRT.
26
27 config TARGET_PREINIT_TIMEOUT
28 int
29 prompt "Failsafe wait timeout" if PREINITOPT
30 default 2
31 help
32 How long to wait for failsafe mode to be entered before
33 continuing with a regular boot if failsafe not selected.
34
35 config TARGET_PREINIT_SHOW_NETMSG
36 bool
37 prompt "Show all preinit network messages" if PREINITOPT
38 default n
39 help
40 Show preinit all network messages (via netmsg broadcast), not only
41 the message indicating to press reset to enter failsafe. Note that
42 if the architecture doesn't define an interface, and there is no
43 'Preinit network interface' defined, then no messages will be
44 emitted, even if this is set.
45
46 config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG
47 bool
48 prompt "Suppress network message indicating failsafe" if PREINITOPT
49 default n
50 help
51 If "Show all preinit network messages" above is not set, then
52 setting this option suppresses the only message that would be
53 emitted otherwise, name the network message to enter failsafe
54 (via netmsg).
55
56 config TARGET_PREINIT_IFNAME
57 string
58 prompt "Preinit network interface" if PREINITOPT
59 default ""
60 help
61 Interface for sending preinit messages to network, and any other
62 default networking in failsafe or preinit. If empty
63 uses $ifname (if defined in /etc/preinit.arch).
64
65 config TARGET_PREINIT_IP
66 string
67 prompt "IP address for preinit network messages" if PREINITOPT
68 default "192.168.1.1"
69 help
70 IP address used to configure interface for preinit network
71 messages, including failsafe messages
72
73 config TARGET_PREINIT_NETMASK
74 string
75 prompt "Netmask for preinit network messages" if PREINITOPT
76 default "255.255.255.0"
77 help
78 Netmask used to configure interface for preinit network
79 messages, including failsafes messages
80
81 config TARGET_PREINIT_BROADCAST
82 string
83 prompt "Broadcast address for preinit network messages" if PREINITOPT
84 default "192.168.1.255"
85 help
86 Broadcast address to which to send preinit network messages, as
87 as failsafe messages
88
89
90 menuconfig INITOPT
91 bool "Init configuration options" if IMAGEOPT
92 default n
93 help
94 These option choose the command that will run as the 'init' command
95 (that is which is responsible for controlling the system once preinit
96 transfers control to it) as well as some options controlling its
97 behaviour. Normally init is /sbin/init.
98
99 config TARGET_INIT_PATH
100 string
101 prompt "PATH for regular boot" if INITOPT
102 default "/bin:/sbin:/usr/bin:/usr/sbin"
103 help
104 Default PATH used during normal operation
105
106 config TARGET_INIT_ENV
107 string
108 prompt "Environment variables to set when starting init (start with none)" if INITOPT
109 default ""
110 help
111 Should be a space seperated list of variable assignments. These
112 variables will be present in the environment. Spaces may not be
113 present (including through expansion) even in a quoted string
114 (env doesn't understanding quoting).
115
116 config TARGET_INIT_CMD
117 string
118 prompt "Init command" if INITOPT
119 default "/sbin/init"
120 help
121 The executable to run as the init process. Is 'exec'd by
122 preinit (which is the init that the kernel launches on boot).
123
124 config TARGET_INIT_SUPPRESS_STDERR
125 bool
126 prompt "Suppress stderr messages of init" if INITOPT
127 default y
128 help
129 Prevents showing stderr messages for init command if not already
130 suppressed during preinit. This is the default behaviour in
131 previous versions of OpenWRT. Removing this does nothing if
132 stderr is suppressed during preinit (which is the default).
133
134
135 menuconfig VERSIONOPT
136 bool "Version configuration options" if IMAGEOPT
137 default n
138 help
139 These options allow to override the version information embedded in
140 the /etc/openwrt_version, /etc/openwrt_release, /etc/banner and
141 /etc/opkg.conf files. Usually there is no need to set these, but
142 they're useful for release builds or custom OpenWrt redistributions
143 that should carry custom version tags.
144
145 if VERSIONOPT
146
147 config VERSION_DIST
148 string
149 prompt "Release distribution"
150 default "OpenWrt"
151 help
152 This is the name of the release distribution.
153 If unspecified, it defaults to OpenWrt.
154
155 config VERSION_NICK
156 string
157 prompt "Release version nickname"
158 help
159 This is the release codename embedded in the image.
160 If unspecified, it defaults to the name of source branch.
161
162 config VERSION_NUMBER
163 string
164 prompt "Release version number"
165 help
166 This is the release version number embedded in the image.
167 If unspecified, it defaults to the svn or git-svn revision
168 of the build tree.
169
170 config VERSION_REPO
171 string
172 prompt "Release repository"
173 default "http://downloads.openwrt.org/snapshots/trunk/%T/packages"
174 help
175 This is the repository address embedded in the image, it defaults
176 to the trunk snapshot repo; the url may contain the following placeholders:
177 %R .. Revision number
178 %V .. Release version or revision number, uppercase
179 %v .. Release version or revision number, lowercase
180 %C .. Release version or "Bleeding Edge", uppercase
181 %c .. Release version or "bleeding_edge", lowercase
182 %N .. Release name, uppercase
183 %n .. Release name, lowercase
184 %D .. Distribution name or "OpenWrt", uppercase
185 %d .. Distribution name or "openwrt", lowercase
186 %T .. Target name
187 %S .. Target/Subtarget name
188
189 config VERSION_MANUFACTURER
190 string
191 prompt "Manufacturer name"
192 help
193 This is the manufacturer name embedded in /etc/device_info
194 Useful for OEMs building OpenWrt based firmware
195
196 config VERSION_PRODUCT
197 string
198 prompt "Product name"
199 help
200 This is the product name embedded in /etc/device_info
201 Useful for OEMs building OpenWrt based firmware
202
203 config VERSION_HWREV
204 string
205 prompt "Hardware revision"
206 help
207 This is the hardware revision string embedded in /etc/device_info
208 Useful for OEMs building OpenWrt based firmware
209 endif
210
211
212 menuconfig PER_FEED_REPO
213 bool "Separate feed repositories" if IMAGEOPT
214 default n
215 help
216 If set, a separate repository is generated within bin/*/packages/
217 for the core packages and each enabled feed.
218
219 config PER_FEED_REPO_ADD_DISABLED
220 bool "Add installed but disabled feeds to opkg.conf"
221 default y
222 depends on PER_FEED_REPO
223 help
224 Add installed but disabled feeds as commented out source lines to opkg.conf.
225
226 source "tmp/.config-feeds.in"
227
228
229 menuconfig SMIMEOPT
230 bool "Package signing options" if IMAGEOPT
231 default n
232 help
233 These options configure the signing key and certificate to
234 be used for signing and verifying packages.
235
236 config OPKGSMIME_CERT
237 string
238 prompt "Path to certificate (PEM certificate format)" if SMIMEOPT
239 help
240 Path to the certificate to use for signature verification
241
242 config OPKGSMIME_KEY
243 string
244 prompt "Path to signing key (PEM private key format)" if SMIMEOPT
245 help
246 Path to the key to use for signing packages
247
248 config OPKGSMIME_PASSPHRASE
249 bool
250 default y
251 prompt "Wait for a passphrase when signing packages?" if SMIMEOPT
252 help
253 If this value is set, then the build will pause and request a passphrase
254 from the command line when signing packages. This SHOULD NOT be used with
255 automatic builds. If this value is not set, a file can be specified from
256 which the passphrase will be read.
257
258 config OPKGSMIME_PASSFILE
259 string
260 prompt "Path to a file containing the passphrase" if SMIMEOPT
261 depends on !OPKGSMIME_PASSPHRASE
262 help
263 Path to a file containing the passphrase for the signing key.
264 If the signing key is not encrypted and does not require a passphrase,
265 this option may be left blank.