target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
  11         model = "Buffalo WZR-HP-G450H";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x4000000>;
  16         };
  17
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 poll-interval = <20>;
  24                 button@0 {
  25                         label = "usb";
  26                         linux,code = <BTN_2>;
  27                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  28                         debounce-interval = <60>;
  29                 };
  30
  31                 button@1 {
  32                         label = "reset";
  33                         linux,code = <KEY_RESTART>;
  34                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  35                         debounce-interval = <60>;
  36                 };
  37
  38                 button@2 {
  39                         label = "movie_engine";
  40                         linux,code = <KEY_RESTART>;
  41                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  42                         debounce-interval = <60>;
  43                 };
  44
  45                 button@3 {
  46                         label = "aoss";
  47                         linux,code = <KEY_WPS_BUTTON>;
  48                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  49                         debounce-interval = <60>;
  50                 };
  51
  52                 button@4 {
  53                         label = "router_off";
  54                         linux,code = <BTN_5>;
  55                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  56                         debounce-interval = <60>;
  57                 };
  58
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63                 led@0 {
  64                         label = "buffalo:orange:security";
  65                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 led@1 {
  69                         label = "buffalo:red:diag";
  70                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  71                 };
  72         };
  73
  74         gpio-export {
  75                 compatible = "gpio-export";
  76                 #size-cells = <0>;
  77
  78                 gpio_usb_power {
  79                         gpio-export,name = "wzr-hp-g450h:usb-power";
  80                         gpio-export,output = <1>;
  81                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  82                 };
  83         };
  84 };
  85
  86 &mdio0 {
  87         status = "okay";
  88         phy-mask = <0x1>;
  89
  90         phy0: ethernet-phy@0 {
  91                 reg = <0>;
  92                 phy-mode = "rgmii";
  93         };
  94 };
  95
  96 &eth0 {
  97         status = "okay";
  98
  99         phy-mode = "rgmii";
 100         pll-data = <0x62000000 0 0>;
 101
 102         fixed-link {
 103                 speed = <1000>;
 104                 full-duplex;
 105         };
 106 };
 107
 108 &uart {
 109         status = "okay";
 110 };
 111
 112 &usb_phy {
 113         status = "okay";
 114 };
 115
 116 &usb {
 117         status = "okay";
 118 };
 119
 120 &pcie {
 121         status = "okay";
 122
 123         ath9k@0000 {
 124                 reg = <0x0000 0 0 0 0>;
 125                 qca,no-eeprom;
 126         };
 127 };