target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9531_glinet_ar300m.dtsi"
   7
   8 / {
   9         compatible = "glinet,ar300m-nor", "qca,qca9531";
  10         model = "GL.iNet GL-AR300M (NOR)";
  11 };
  12
  13 &spi {
  14         status = "okay";
  15         num-cs = <0>;
  16
  17         flash@0 {
  18                 compatible = "winbond,w25q128", "jedec,spi-nor";
  19                 reg = <0>;
  20                 spi-max-frequency = <25000000>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x000000 0x040000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@1 {
  34                                 label = "u-boot-env";
  35                                 reg = <0x040000 0x010000>;
  36                         };
  37
  38                         partition@2 {
  39                                 compatible = "denx,uimage";
  40                                 label = "firmware";
  41                                 reg = <0x050000 0xfa0000>;
  42                         };
  43
  44                         art: partition@3 {
  45                                 label = "art";
  46                                 reg = <0xff0000 0x010000>;
  47                         };
  48                 };
  49         };
  50 };