12a08873b5a4c164845b3ac2eedd0acc517f132e
[openwrt/staging/mkresin.git] / target / linux / brcm63xx / patches-3.10 / 531-board_96328A-1441N1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -180,6 +180,79 @@ static struct board_info __initdata boar
4 },
5 };
6
7 +static struct board_info __initdata board_96328A_1441N1 = {
8 + .name = "96328A-1441N1",
9 + .expected_cpu_id = 0x6328,
10 +
11 + .has_uart0 = 1,
12 + .has_pci = 1,
13 + .has_ohci0 = 1,
14 + .has_ehci0 = 1,
15 + .num_usbh_ports = 1,
16 + .has_enetsw = 1,
17 +
18 + .enetsw = {
19 + .used_ports = {
20 + [0] = {
21 + .used = 1,
22 + .phy_id = 1,
23 + .name = "Port 1",
24 + },
25 + [1] = {
26 + .used = 1,
27 + .phy_id = 2,
28 + .name = "Port 2",
29 + },
30 + [2] = {
31 + .used = 1,
32 + .phy_id = 3,
33 + .name = "Port 3",
34 + },
35 + [3] = {
36 + .used = 1,
37 + .phy_id = 4,
38 + .name = "Port 4",
39 + },
40 + },
41 + },
42 +
43 + .leds = {
44 + {
45 + .name = "96328A-1441N1:green:power",
46 + .gpio = 8,
47 + .default_trigger = "default-on",
48 + },
49 + {
50 + .name = "96328A-1441N1:red:power",
51 + .gpio = 4,
52 + },
53 + {
54 + .name = "96328A-1441N1:green:inet",
55 + .gpio = 7,
56 + },
57 + {
58 + .name = "96328A-1441N1:red:inet",
59 + .gpio = 1,
60 + },
61 + {
62 + .name = "96328A-1441N1:green:dsl",
63 + .gpio = 11,
64 + .active_low = 1,
65 + },
66 + },
67 +
68 + .buttons = {
69 + {
70 + .desc = "reset",
71 + .gpio = 23,
72 + .active_low = 1,
73 + .type = EV_KEY,
74 + .code = KEY_RESTART,
75 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
76 + },
77 + },
78 +};
79 +
80 static struct board_info __initdata board_963281TAN = {
81 .name = "963281TAN",
82 .expected_cpu_id = 0x6328,
83 @@ -3098,6 +3171,7 @@ static const struct board_info __initcon
84 #endif
85 #ifdef CONFIG_BCM63XX_CPU_6328
86 &board_96328avng,
87 + &board_96328A_1441N1,
88 &board_963281TAN,
89 &board_963281T_TEF,
90 &board_dsl_274xb_f1,