target/linux/brcm63xx/patches-3.3/459_board_CPVA502plus.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -1072,6 +1072,44 @@ static struct board_info __initdata boar
   4         },
   5  };
   6
   7 +static struct board_info __initdata board_CPVA502plus = {
   8 +       .name                           = "CPVA502+",
   9 +       .expected_cpu_id                = 0x6348,
  10 +
  11 +       .has_uart0                      = 1,
  12 +       .has_enet0                      = 1,
  13 +       .has_enet1                      = 1,
  14 +       .has_pci                        = 1,
  15 +
  16 +       .enet0 = {
  17 +               .has_phy                = 1,
  18 +               .use_internal_phy       = 1,
  19 +       },
  20 +       .enet1 = {
  21 +               .force_speed_100        = 1,
  22 +               .force_duplex_full      = 1,
  23 +       },
  24 +
  25 +       .has_udc0                       = 1,
  26 +
  27 +       .leds = {
  28 +               {
  29 +                       .name           = "phone",
  30 +                       .gpio           = 0,
  31 +                       .active_low     = 1,
  32 +               },
  33 +               {
  34 +                       .name           = "link",
  35 +                       .gpio           = 5,
  36 +                       .active_low     = 1,
  37 +               },
  38 +               {
  39 +                       .name           = "feth1", /* FIXME:does gpio4 enable eth1 phy? */
  40 +                       .gpio           = 4,
  41 +                       .active_low     = 1,
  42 +               },
  43 +       },
  44 +};
  45  #endif
  46
  47  /*
  48 @@ -2132,6 +2170,7 @@ static const struct board_info __initdat
  49         &board_V2110,
  50         &board_ct536_ct5621,
  51         &board_96348A_122,
  52 +       &board_CPVA502plus,
  53  #endif
  54
  55  #ifdef CONFIG_BCM63XX_CPU_6358