target/linux/ipq40xx/patches-4.14/084-ARM-dts-ipq4019-Add-a-default-chosen-node.patch

   1 From c696a020193e7f96ead97b6b19a2bcd929b299d3 Mon Sep 17 00:00:00 2001
   2 From: Sricharan R <sricharan@codeaurora.org>
   3 Date: Fri, 25 May 2018 11:41:11 +0530
   4 Subject: [PATCH] ARM: dts: ipq4019: Add a default chosen node
   5
   6 Add a 'chosen' node to select the serial console.
   7 This is needed when bootloaders do not pass the
   8 'console=' bootargs.
   9
  10 Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
  11 Signed-off-by: Sricharan R <sricharan@codeaurora.org>
  12 Signed-off-by: Andy Gross <andy.gross@linaro.org>
  13 ---
  14  arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 8 ++++++++
  15  arch/arm/boot/dts/qcom-ipq4019.dtsi           | 2 +-
  16  2 files changed, 9 insertions(+), 1 deletion(-)
  17
  18 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
  19 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
  20 @@ -20,6 +20,14 @@
  21         model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
  22         compatible = "qcom,ipq4019";
  23
  24 +       aliases {
  25 +               serial0 = &blsp1_uart1;
  26 +       };
  27 +
  28 +       chosen {
  29 +               stdout-path = "serial0:115200n8";
  30 +       };
  31 +
  32         soc {
  33                 rng@22000 {
  34                         status = "ok";
  35 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
  36 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
  37 @@ -350,7 +350,7 @@
  38                         regulator;
  39                 };
  40
  41 -               serial@78af000 {
  42 +               blsp1_uart1: serial@78af000 {
  43                         compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
  44                         reg = <0x78af000 0x200>;
  45                         interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;