target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
   9         model = "Arcor 801";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_blue;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_blue;
  19                 led-upgrade = &power_blue;
  20
  21                 led-dsl = &dsl_blue;
  22                 led-usb = &led_usb;
  23                 led-wifi = &wifi;
  24         };
  25
  26         memory@0 {
  27                 reg = <0x0 0x2000000>;
  28         };
  29
  30         ath5k_eep {
  31                 compatible = "ath5k,eeprom";
  32                 ath,eep-flash = <&boardconfig 0x400>;
  33                 ath,mac-offset = <0x0>;
  34                 ath,eep-swap;
  35         };
  36
  37         gpio-keys-polled {
  38                 compatible = "gpio-keys-polled";
  39                 #address-cells = <1>;
  40                 #size-cells = <0>;
  41                 poll-interval = <100>;
  42
  43                 rfkill {
  44                         label = "rfkill";
  45                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_RFKILL>;
  47                 };
  48                 wps {
  49                         label = "wps";
  50                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_WPS_BUTTON>;
  52                 };
  53                 reset {
  54                         label = "reset";
  55                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_RESTART>;
  57                 };
  58         };
  59
  60         gpio-leds {
  61                 compatible = "gpio-leds";
  62                 power_blue: power0 {
  63                         label = "arv452cqw:blue:power";
  64                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  65                         default-state = "keep";
  66                 };
  67                 dsl_blue: dsl {
  68                         label = "arv452cqw:blue:dsl";
  69                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  70                 };
  71                 isdn {
  72                         label = "arv452cqw:blue:isdn";
  73                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  74                 };
  75                 power_red: power1 {
  76                         label = "arv452cqw:red:power";
  77                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  78                 };
  79                 wps {
  80                         label = "arv452cqw:blue:wps";
  81                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  82                 };
  83                 wps1 {
  84                         label = "arv452cqw:yellow:wps";
  85                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  86                 };
  87                 fxs1 {
  88                         label = "arv452cqw:blue:telefon1";
  89                         gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
  90                 };
  91                 fxs2 {
  92                         label = "arv452cqw:blue:telefon2";
  93                         gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
  94                 };
  95                 wps2 {
  96                         label = "arv452cqw:red:wps";
  97                         gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
  98                 };
  99                 fxo {
 100                         label = "arv452cqw:blue:line";
 101                         gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
 102                 };
 103                 voice {
 104                         label = "arv452cqw:blue:sprache";
 105                         gpios = <&gpiomm 4 1>;
 106                 };
 107                 led_usb: usb {
 108                         label = "arv452cqw:blue:usb";
 109                         gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
 110                 };
 111                 wifi: wifi {
 112                         label = "arv452cqw:blue:wlan";
 113                         gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
 114                 };
 115                 /*
 116                         internet blue and internet red are missing
 117                         dsl2 and dsl3 are not referenced in manual
 118                 */
 119                 dsl2 {
 120                         label = "arv452cqw:yellow:dsl";
 121                         gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
 122                 };
 123                 dsl3 {
 124                         label = "arv452cqw:red:dsl";
 125                         gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
 126                 };
 127         };
 128
 129         usb_vbus: regulator-usb-vbus {
 130                 compatible = "regulator-fixed";
 131
 132                 regulator-name = "USB_VBUS";
 133
 134                 regulator-min-microvolt = <5000000>;
 135                 regulator-max-microvolt = <5000000>;
 136
 137                 gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
 138                 enable-active-high;
 139         };
 140 };
 141
 142 &gpio {
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&state_default>;
 145
 146         state_default: pinmux {
 147                 ebu {
 148                         lantiq,groups = "ebu cs1";
 149                         lantiq,function = "ebu";
 150                 };
 151                 pci_in {
 152                         lantiq,groups = "req1";
 153                         lantiq,function = "pci";
 154                         lantiq,open-drain = <1>;
 155                         lantiq,pull = <2>;
 156                         lantiq,output = <0>;
 157                 };
 158                 pci_out {
 159                         lantiq,groups = "gnt1";
 160                         lantiq,function = "pci";
 161                         lantiq,output = <1>;
 162                 };
 163                 pci_rst {
 164                         lantiq,pins = "io21";
 165                         lantiq,pull = <0>;
 166                         lantiq,output = <1>;
 167                 };
 168                 leds {
 169                         lantiq,pins = "io3", "io5", "io6", "io7", "io9";
 170                         lantiq,output = <1>;
 171                 };
 172         };
 173 };
 174
 175 &gpiomm {
 176         status = "okay";
 177         lantiq,shadow = <0x77f>;
 178 };
 179
 180 /*
 181 #define ARV452CPW_SWITCH_RESET          110
 182 */
 183 &gsw {
 184         phy-mode = "rmii";
 185         mtd-mac-address = <&boardconfig 0x16>;
 186 };
 187
 188 &localbus {
 189         nor@0 {
 190                 compatible = "lantiq,nor";
 191                 bank-width = <2>;
 192                 reg = <0 0x0 0x400000>;
 193                 #address-cells = <1>;
 194                 #size-cells = <1>;
 195
 196                 partitions {
 197                         compatible = "fixed-partitions";
 198                         #address-cells = <1>;
 199                         #size-cells = <1>;
 200
 201                         partition@0 {
 202                                 label = "uboot";
 203                                 reg = <0x00000 0x10000>;
 204                                 read-only;
 205                         };
 206
 207                         partition@10000 {
 208                                 label = "uboot_env";
 209                                 reg = <0x10000 0x10000>;
 210                                 read-only;
 211                         };
 212
 213                         partition@20000 {
 214                                 label = "firmware";
 215                                 reg = <0x20000 0x3d0000>;
 216                         };
 217
 218                         boardconfig: partition@3f0000 {
 219                                 label = "boardconfig";
 220                                 reg = <0x3f0000 0x10000>;
 221                                 read-only;
 222                         };
 223                 };
 224         };
 225 };
 226
 227 &pci0 {
 228         status = "okay";
 229         lantiq,external-clock;
 230         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 231 };
 232
 233 &usb_phy {
 234         status = "okay";
 235 };
 236
 237 &usb {
 238         status = "okay";
 239         vbus-supply = <&usb_vbus>;
 240 };
 241
 242 &vmmc {
 243         status = "okay";
 244         gpios = <&gpio 31 GPIO_ACTIVE_HIGH
 245                 &gpiomm 7 GPIO_ACTIVE_HIGH>;
 246 };