c0bca8403149a3d3ca3debf355129f7a50f8742d
[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / ARV7506PW11.dts
1 /dts-v1/;
2
3 #include "danube.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube";
9 model = "Alice/O2 IAD 4421";
10
11 chosen {
12 bootargs = "console=ttyLTQ0,115200";
13 };
14
15 aliases {
16 led-boot = &power;
17 led-failsafe = &power_red;
18 led-running = &power;
19 led-upgrade = &power;
20
21 led-dsl = &dsl;
22 led-internet = &internet;
23 led-wifi = &wlan;
24 };
25
26 memory@0 {
27 device_type = "memory";
28 reg = <0x0 0x4000000>;
29 };
30
31 keys {
32 compatible = "gpio-keys-polled";
33 poll-interval = <100>;
34
35 rfkill {
36 label = "rfkill";
37 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RFKILL>;
39 };
40 reset {
41 label = "reset";
42 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_RESTART>;
44 };
45 };
46
47 leds {
48 compatible = "gpio-leds";
49 wlan: wlan {
50 label = "arv7506pw11:green:wlan";
51 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
52 };
53 power: power {
54 label = "arv7506pw11:green:power";
55 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
56 default-state = "keep";
57 };
58 dsl: dsl {
59 label = "arv7506pw11:green:dsl";
60 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
61 };
62 internet: internet {
63 label = "arv7506pw11:green:internet";
64 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
65 };
66 power_red: power_red {
67 label = "arv7506pw11:red:power";
68 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
69 };
70 internet_red {
71 label = "arv7506pw11:red:internet";
72 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
73 };
74 info {
75 label = "arv7506pw11:green:info";
76 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
77 };
78 telefon {
79 label = "arv7506pw11:green:telefon";
80 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
81 };
82 info_red {
83 label = "arv7506pw11:red:info";
84 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
85 };
86 };
87 };
88
89 &gpio {
90 pinctrl-names = "default";
91 pinctrl-0 = <&state_default>;
92
93 state_default: pinmux {
94 pci {
95 lantiq,groups = "gnt1";
96 lantiq,function = "pci";
97 lantiq,output = <1>;
98 };
99 pci_rst {
100 lantiq,pins = "io21";
101 lantiq,pull = <2>;
102 lantiq,output = <1>;
103 };
104 };
105 };
106
107 /* GPIO 19: switch reset */
108 &gsw {
109 phy-mode = "rmii";
110 mtd-mac-address = <&boardconfig 0x16>;
111 };
112
113 &localbus {
114 flash@0 {
115 compatible = "lantiq,nor";
116 bank-width = <2>;
117 reg = <0 0x0 0x800000>;
118
119 partitions {
120 compatible = "fixed-partitions";
121 #address-cells = <1>;
122 #size-cells = <1>;
123
124 partition@0 {
125 label = "uboot";
126 reg = <0x00000 0x40000>;
127 read-only;
128 };
129
130 partition@40000 {
131 label = "uboot_env";
132 reg = <0x40000 0x10000>;
133 read-only;
134 };
135
136 partition@50000 {
137 label = "firmware";
138 reg = <0x50000 0x7a0000>;
139 };
140
141 boardconfig: partition@7f0000 {
142 label = "board_config";
143 reg = <0x7f0000 0x10000>;
144 read-only;
145 };
146 };
147 };
148 };
149
150 &pci0 {
151 status = "okay";
152 lantiq,external-clock;
153 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
154
155 wifi@1814,3592 {
156 compatible = "pci1814,3592";
157 reg = <0x7000 0 0 0 0>;
158 ralink,mtd-eeprom = <&boardconfig 0x410>;
159 ralink,mtd-eeprom-swap;
160 mtd-mac-address = <&boardconfig 0x16>;
161 mtd-mac-address-increment = <1>;
162 };
163 };