target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube";
   9         model = "Speedport W 504V Typ A";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_green;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_green;
  19                 led-upgrade = &power_green;
  20
  21                 led-dsl = &dsl_green;
  22                 led-internet = &online_green;
  23                 led-wifi = &wireless_green;
  24         };
  25
  26         memory@0 {
  27                 device_type = "memory";
  28                 reg = <0x0 0x4000000>;
  29         };
  30
  31         gpio-keys-polled {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 wlan {
  36                         label = "wlan";
  37                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                 };
  40                 reset {
  41                         label = "reset";
  42                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_RESTART>;
  44                 };
  45                 /* key DECT is missing */
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 power_green: power-green {
  52                         label = "arv8539pw22:green:power";
  53                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
  54                         default-state = "keep";
  55                 };
  56                 power_red: power-red {
  57                         label = "arv8539pw22:red:power";
  58                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 dsl_green: dsl-green {
  62                         label = "arv8539pw22:green:dsl";
  63                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 online_green: online-green {
  67                         label = "arv8539pw22:green:online";
  68                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wireless_green: wireless-green {
  72                         label = "arv8539pw22:green:wlan";
  73                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  74                 };
  75                 /*
  76                         telefonie green is missing
  77                 */
  78         };
  79
  80         usb_vbus: regulator-usb-vbus {
  81                 compatible = "regulator-fixed";
  82
  83                 regulator-name = "USB_VBUS";
  84
  85                 regulator-min-microvolt = <5000000>;
  86                 regulator-max-microvolt = <5000000>;
  87
  88                 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
  89                 enable-active-high;
  90         };
  91 };
  92
  93 &gpio {
  94         pinctrl-names = "default";
  95         pinctrl-0 = <&state_default>;
  96
  97         state_default: pinmux {
  98                 pci_in {
  99                         lantiq,groups = "req1";
 100                         lantiq,function = "pci";
 101                         lantiq,open-drain = <1>;
 102                         lantiq,pull = <2>;
 103                         lantiq,output = <0>;
 104                 };
 105                 pci_out {
 106                         lantiq,groups = "gnt1";
 107                         lantiq,function = "pci";
 108                         lantiq,output = <1>;
 109                 };
 110                 pci_rst {
 111                         lantiq,pins = "io21";
 112                         lantiq,pull = <2>;
 113                         lantiq,output = <1>;
 114                 };
 115                 relay {
 116                         lantiq,pins = "io31";
 117                         lantiq,output = <1>;
 118                 };
 119         };
 120 };
 121
 122 &gsw {
 123         phy-mode = "mii";
 124         mtd-mac-address = <&art 0x16>;
 125 };
 126
 127 &localbus {
 128         nor@0 {
 129                 compatible = "lantiq,nor";
 130                 bank-width = <2>;
 131                 reg = <0 0x0 0x800000>;
 132
 133                 partitions {
 134                         compatible = "fixed-partitions";
 135                         #address-cells = <1>;
 136                         #size-cells = <1>;
 137
 138                         partition@0 {
 139                                 label = "uboot";
 140                                 reg = <0x00000 0x30000>;        /* 192 KiB */
 141                                 read-only;
 142                         };
 143
 144                         partition@30000 {
 145                                 label = "uboot";
 146                                 reg = <0x30000 0x10000>;        /* 64 KiB */
 147                                 read-only;
 148                         };
 149
 150                         partition@40000 {
 151                                 label = "firmware";
 152                                 reg = <0x40000 0x7B0000>;       /* 7872 KiB */
 153                         };
 154
 155                         art: partition@7F0000 {
 156                                 label = "art";
 157                                 reg = <0x7F0000 0x10000>;       /* 64 KiB*/
 158                                 read-only;
 159                         };
 160                 };
 161         };
 162 };
 163
 164 &pci0 {
 165         status = "okay";
 166         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 167
 168         wifi@168c,0029 {
 169                 compatible = "pci168c,0029";
 170                 reg = <0x7000 0 0 0 0>;
 171                 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
 172                 mtd-mac-address = <&art 0x16>;
 173                 mtd-mac-address-increment = <1>;
 174         };
 175 };
 176
 177 &usb_phy {
 178         status = "okay";
 179 };
 180
 181 &usb {
 182         status = "okay";
 183         vbus-supply = <&usb_vbus>;
 184 };
 185
 186 &vmmc {
 187         status = "okay";
 188         gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
 189 };