lantiq: dts: drop falcon clock node
[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / DM200.dts
1 /dts-v1/;
2
3 #include "vr9.dtsi"
4
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
7
8 / {
9 compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
10 model = "Netgear DM200";
11
12 chosen {
13 bootargs = "console=ttyLTQ0,115200";
14 };
15
16 aliases {
17 led-boot = &power_green;
18 led-failsafe = &power_amber;
19 led-running = &power_green;
20 led-upgrade = &power_green;
21
22 led-dsl = &dsl_green;
23 };
24
25 memory@0 {
26 device_type = "memory";
27 reg = <0x0 0x4000000>;
28 };
29
30 gpio-keys-polled {
31 compatible = "gpio-keys-polled";
32 poll-interval = <100>;
33 reset {
34 label = "reset";
35 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
36 linux,code = <KEY_RESTART>;
37 };
38 };
39
40 gpio_export {
41 compatible = "gpio-export";
42 #size-cells = <0>;
43
44 annexa {
45 gpio-export,name = "annexa";
46 gpio-export,output = <0>;
47 gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
48 };
49 annexb {
50 gpio-export,name = "annexb";
51 gpio-export,output = <0>;
52 gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
53 };
54 };
55
56 gpio-leds {
57 compatible = "gpio-leds";
58
59 power_amber: power_amber {
60 label = "dm200:amber:power";
61 gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
62 };
63 power_green: power_green {
64 label = "dm200:green:power";
65 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
66 };
67
68 lan_amber {
69 label = "dm200:amber:lan";
70 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
71 };
72 lan_green {
73 label = "dm200:green:lan";
74 gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
75 };
76
77 dsl_amber {
78 label = "dm200:amber:dsl";
79 gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
80 };
81 dsl_green: dsl_green {
82 label = "dm200:green:dsl";
83 gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
84 };
85 };
86 };
87
88 &eth0 {
89 lantiq,phys = <&gphy1>;
90
91 lan: interface@0 {
92 compatible = "lantiq,xrx200-pdi";
93 #address-cells = <1>;
94 #size-cells = <0>;
95 reg = <0>;
96
97 ethernet@4 {
98 compatible = "lantiq,xrx200-pdi-port";
99 reg = <4>;
100 phy-mode = "mii";
101 phy-handle = <&phy13>;
102 };
103 };
104
105 mdio {
106 #address-cells = <1>;
107 #size-cells = <0>;
108 compatible = "lantiq,xrx200-mdio";
109
110 phy13: ethernet-phy@13 {
111 reg = <0x13>;
112 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
113 };
114 };
115 };
116
117 &gphy1 {
118 lantiq,gphy-mode = <GPHY_MODE_FE>;
119 };
120
121 &gpio {
122 pinctrl-names = "default";
123 pinctrl-0 = <&state_default>;
124
125 state_default: pinmux {
126 mdio {
127 lantiq,groups = "mdio";
128 lantiq,function = "mdio";
129 };
130 };
131
132 pins_spi_default: pins_spi_default {
133 spi_in {
134 lantiq,groups = "spi_di";
135 lantiq,function = "spi";
136 };
137 spi_out {
138 lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
139 lantiq,function = "spi";
140 lantiq,output = <1>;
141 };
142 };
143 };
144
145 &pcie0 {
146 status = "disabled";
147 };
148
149 &spi {
150 status = "okay";
151
152 pinctrl-names = "default";
153 pinctrl-0 = <&pins_spi_default>;
154
155 m25p80@4 {
156 compatible = "jedec,spi-nor";
157 reg = <4>;
158 spi-max-frequency = <10000000>;
159
160 partitions {
161 #address-cells = <1>;
162 #size-cells = <1>;
163 compatible = "fixed-partitions";
164
165 partition@0 {
166 reg = <0x0 0x20000>;
167 label = "uboot";
168 read-only;
169 };
170
171 partition@20000 {
172 reg = <0x20000 0x10000>;
173 label = "gphyfirmware";
174 read-only;
175 };
176
177 partition@30000 {
178 reg = <0x30000 0x7b0000>;
179 label = "firmware";
180 };
181
182 partition@7e0000 {
183 reg = <0x7e0000 0x10000>;
184 label = "sysconfig";
185 read-only;
186 };
187
188 partition@7f0000 {
189 reg = <0x7f0000 0x2000>;
190 label = "ubootconfig";
191 read-only;
192 };
193
194 partition@7f2000 {
195 reg = <0x7f2000 0x1000>;
196 label = "ART";
197 read-only;
198 };
199
200 partition@7f3000 {
201 reg = <0x7f3000 0x1000>;
202 label = "pot";
203 read-only;
204 };
205
206 partition@7f4000 {
207 reg = <0x7f4000 0xc000>;
208 label = "ret";
209 read-only;
210 };
211 };
212 };
213 };