target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370-REV2.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   5
   6 / {
   7         compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
   8         model = "AVM FRITZ!Box 3370 Rev. 2";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18                 led-upgrade = &power_green;
  19
  20                 led-dsl = &dsl;
  21                 led-internet = &info_green;
  22                 led-wifi = &wifi;
  23         };
  24
  25         memory@0 {
  26                 device_type = "memory";
  27                 reg = <0x0 0x8000000>;
  28         };
  29
  30         gpio-poweroff {
  31                 compatible = "gpio-poweroff";
  32                 gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
  33         };
  34
  35         gpio-keys-polled {
  36                 compatible = "gpio-keys-polled";
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 poll-interval = <100>;
  40
  41                 power {
  42                         label = "power";
  43                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  44                         linux,code = <KEY_POWER>;
  45                 };
  46
  47                 wifi {
  48                         label = "wlan";
  49                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
  50                         linux,code = <KEY_WLAN>;
  51                 };
  52         };
  53
  54         gpio-leds {
  55                 compatible = "gpio-leds";
  56
  57                 power_green: power {
  58                         label = "fritz3370:green:power";
  59                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  60                         default-state = "keep";
  61                 };
  62
  63                 power_red: power2 {
  64                         label = "fritz3370:red:power";
  65                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 info_red {
  69                         label = "fritz3370:red:info";
  70                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 wifi: wifi {
  74                         label = "fritz3370:green:wlan";
  75                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 dsl: dsl {
  79                         label = "fritz3370:green:dsl";
  80                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  81                 };
  82
  83                 lan {
  84                         label = "fritz3370:green:lan";
  85                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 info_green: info_green {
  89                         label = "fritz3370:green:info";
  90                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  91                 };
  92         };
  93
  94         usb0_vbus: regulator-usb0-vbus {
  95                 compatible = "regulator-fixed";
  96
  97                 regulator-name = "USB0_VBUS";
  98
  99                 regulator-min-microvolt = <5000000>;
 100                 regulator-max-microvolt = <5000000>;
 101
 102                 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
 103                 enable-active-high;
 104         };
 105
 106         usb1_vbus: regulator-usb1-vbus {
 107                 compatible = "regulator-fixed";
 108
 109                 regulator-name = "USB1_VBUS";
 110
 111                 regulator-min-microvolt = <5000000>;
 112                 regulator-max-microvolt = <5000000>;
 113
 114                 gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
 115                 enable-active-high;
 116         };
 117 };
 118
 119 &eth0 {
 120         lan: interface@0 {
 121                 compatible = "lantiq,xrx200-pdi";
 122                 #address-cells = <1>;
 123                 #size-cells = <0>;
 124                 reg = <0>;
 125                 lantiq,switch;
 126
 127                 ethernet@0 {
 128                         compatible = "lantiq,xrx200-pdi-port";
 129                         reg = <0>;
 130                         phy-mode = "rgmii";
 131                         phy-handle = <&phy0>;
 132                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 133                 };
 134
 135                 ethernet@1 {
 136                         compatible = "lantiq,xrx200-pdi-port";
 137                         reg = <1>;
 138                         phy-mode = "rgmii";
 139                         phy-handle = <&phy1>;
 140                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
 141                 };
 142
 143                 ethernet@2 {
 144                         compatible = "lantiq,xrx200-pdi-port";
 145                         reg = <2>;
 146                         phy-mode = "gmii";
 147                         phy-handle = <&phy11>;
 148                 };
 149
 150                 ethernet@4 {
 151                         compatible = "lantiq,xrx200-pdi-port";
 152                         reg = <4>;
 153                         phy-mode = "gmii";
 154                         phy-handle = <&phy13>;
 155                 };
 156         };
 157
 158         mdio {
 159                 #address-cells = <1>;
 160                 #size-cells = <0>;
 161                 compatible = "lantiq,xrx200-mdio";
 162
 163                 phy0: ethernet-phy@0 {
 164                         reg = <0x0>;
 165                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 166                 };
 167
 168                 phy1: ethernet-phy@1 {
 169                         reg = <0x1>;
 170                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 171                 };
 172
 173                 phy11: ethernet-phy@11 {
 174                         reg = <0x11>;
 175                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 176                 };
 177
 178                 phy13: ethernet-phy@13 {
 179                         reg = <0x13>;
 180                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 181                 };
 182         };
 183 };
 184
 185 &gphy0 {
 186         lantiq,gphy-mode = <GPHY_MODE_GE>;
 187 };
 188
 189 &gphy1 {
 190         lantiq,gphy-mode = <GPHY_MODE_GE>;
 191 };
 192
 193 &gpio {
 194         pinctrl-names = "default";
 195         pinctrl-0 = <&state_default>;
 196
 197         state_default: pinmux {
 198                 mdio {
 199                         lantiq,groups = "mdio";
 200                         lantiq,function = "mdio";
 201                 };
 202
 203                 nand {
 204                         lantiq,groups = "nand cle", "nand ale",
 205                                         "nand rd", "nand cs1", "nand rdy";
 206                         lantiq,function = "ebu";
 207                         lantiq,pull = <1>;
 208                 };
 209
 210                 phy-rst {
 211                         lantiq,pins = "io37", "io44";
 212                         lantiq,pull = <0>;
 213                         lantiq,open-drain = <0>;
 214                         lantiq,output = <1>;
 215                 };
 216
 217                 pcie-rst {
 218                         lantiq,pins = "io21";
 219                         lantiq,pull = <0>;
 220                         lantiq,output = <1>;
 221                 };
 222         };
 223
 224         pins_spi_default: pins_spi_default {
 225                 spi_in {
 226                         lantiq,groups = "spi_di";
 227                         lantiq,function = "spi";
 228                 };
 229
 230                 spi_out {
 231                         lantiq,groups = "spi_do", "spi_clk",
 232                                 "spi_cs4";
 233                         lantiq,function = "spi";
 234                         lantiq,output = <1>;
 235                 };
 236         };
 237 };
 238
 239 &pcie0 {
 240         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 241
 242         pcie@0 {
 243                 reg = <0 0 0 0 0>;
 244                 #interrupt-cells = <1>;
 245                 #size-cells = <2>;
 246                 #address-cells = <3>;
 247                 device_type = "pci";
 248
 249                 wifi@0,0 {
 250                         compatible = "pci0,0";
 251                         reg = <0 0 0 0 0>;
 252                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 253                 };
 254         };
 255 };
 256
 257 &spi {
 258         status = "okay";
 259
 260         pinctrl-names = "default";
 261         pinctrl-0 = <&pins_spi_default>;
 262
 263         m25p80@4 {
 264                 compatible = "jedec,spi-nor";
 265                 reg = <4>;
 266                 spi-max-frequency = <1000000>;
 267
 268                 partitions {
 269                         compatible = "fixed-partitions";
 270                         #address-cells = <1>;
 271                         #size-cells = <1>;
 272
 273                         urlader: partition@0 {
 274                                 reg = <0x0 0x20000>;
 275                                 label = "urlader";
 276                                 read-only;
 277                         };
 278
 279                         partition@20000 {
 280                                 reg = <0x20000 0x10000>;
 281                                 label = "tffs (1)";
 282                                 read-only;
 283                         };
 284
 285                         partition@30000 {
 286                                 reg = <0x30000 0x10000>;
 287                                 label = "tffs (2)";
 288                                 read-only;
 289                         };
 290                 };
 291         };
 292 };
 293
 294 &usb_phy0 {
 295         status = "okay";
 296 };
 297
 298 &usb_phy1 {
 299         status = "okay";
 300 };
 301
 302 &usb0 {
 303         status = "okay";
 304         vbus-supply = <&usb0_vbus>;
 305 };
 306
 307 &usb1 {
 308         status = "okay";
 309         vbus-supply = <&usb1_vbus>;
 310 };