lantiq: dts: move partitions into partition node
[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / FRITZ3370-REV2.dtsi
1 #include "vr9.dtsi"
2
3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
5
6 / {
7 compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
8 model = "AVM FRITZ!Box 3370 Rev. 2";
9
10 chosen {
11 bootargs = "console=ttyLTQ0,115200";
12 };
13
14 aliases {
15 led-boot = &power_green;
16 led-failsafe = &power_red;
17 led-running = &power_green;
18 led-upgrade = &power_green;
19
20 led-dsl = &dsl;
21 led-internet = &info_green;
22 led-wifi = &wifi;
23 };
24
25 memory@0 {
26 device_type = "memory";
27 reg = <0x0 0x8000000>;
28 };
29
30 gpio-poweroff {
31 compatible = "gpio-poweroff";
32 gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
33 };
34
35 gpio-keys-polled {
36 compatible = "gpio-keys-polled";
37 #address-cells = <1>;
38 #size-cells = <0>;
39 poll-interval = <100>;
40
41 power {
42 label = "power";
43 gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
44 linux,code = <KEY_POWER>;
45 };
46
47 wifi {
48 label = "wlan";
49 gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
50 linux,code = <KEY_WLAN>;
51 };
52 };
53
54 gpio-leds {
55 compatible = "gpio-leds";
56
57 power_green: power {
58 label = "fritz3370:green:power";
59 gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
60 default-state = "keep";
61 };
62
63 power_red: power2 {
64 label = "fritz3370:red:power";
65 gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
66 };
67
68 info_red {
69 label = "fritz3370:red:info";
70 gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
71 };
72
73 wifi: wifi {
74 label = "fritz3370:green:wlan";
75 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
76 };
77
78 dsl: dsl {
79 label = "fritz3370:green:dsl";
80 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
81 };
82
83 lan {
84 label = "fritz3370:green:lan";
85 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
86 };
87
88 info_green: info_green {
89 label = "fritz3370:green:info";
90 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
91 };
92 };
93
94 usb0_vbus: regulator-usb0-vbus {
95 compatible = "regulator-fixed";
96
97 regulator-name = "USB0_VBUS";
98
99 regulator-min-microvolt = <5000000>;
100 regulator-max-microvolt = <5000000>;
101
102 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
103 enable-active-high;
104 };
105
106 usb1_vbus: regulator-usb1-vbus {
107 compatible = "regulator-fixed";
108
109 regulator-name = "USB1_VBUS";
110
111 regulator-min-microvolt = <5000000>;
112 regulator-max-microvolt = <5000000>;
113
114 gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
115 enable-active-high;
116 };
117 };
118
119 &eth0 {
120 lan: interface@0 {
121 compatible = "lantiq,xrx200-pdi";
122 #address-cells = <1>;
123 #size-cells = <0>;
124 reg = <0>;
125 lantiq,switch;
126
127 ethernet@0 {
128 compatible = "lantiq,xrx200-pdi-port";
129 reg = <0>;
130 phy-mode = "rgmii";
131 phy-handle = <&phy0>;
132 gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
133 };
134
135 ethernet@1 {
136 compatible = "lantiq,xrx200-pdi-port";
137 reg = <1>;
138 phy-mode = "rgmii";
139 phy-handle = <&phy1>;
140 gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
141 };
142
143 ethernet@2 {
144 compatible = "lantiq,xrx200-pdi-port";
145 reg = <2>;
146 phy-mode = "gmii";
147 phy-handle = <&phy11>;
148 };
149
150 ethernet@4 {
151 compatible = "lantiq,xrx200-pdi-port";
152 reg = <4>;
153 phy-mode = "gmii";
154 phy-handle = <&phy13>;
155 };
156 };
157
158 mdio {
159 #address-cells = <1>;
160 #size-cells = <0>;
161 compatible = "lantiq,xrx200-mdio";
162
163 phy0: ethernet-phy@0 {
164 reg = <0x0>;
165 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
166 };
167
168 phy1: ethernet-phy@1 {
169 reg = <0x1>;
170 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
171 };
172
173 phy11: ethernet-phy@11 {
174 reg = <0x11>;
175 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
176 };
177
178 phy13: ethernet-phy@13 {
179 reg = <0x13>;
180 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
181 };
182 };
183 };
184
185 &gphy0 {
186 lantiq,gphy-mode = <GPHY_MODE_GE>;
187 };
188
189 &gphy1 {
190 lantiq,gphy-mode = <GPHY_MODE_GE>;
191 };
192
193 &gpio {
194 pinctrl-names = "default";
195 pinctrl-0 = <&state_default>;
196
197 state_default: pinmux {
198 mdio {
199 lantiq,groups = "mdio";
200 lantiq,function = "mdio";
201 };
202
203 nand {
204 lantiq,groups = "nand cle", "nand ale",
205 "nand rd", "nand cs1", "nand rdy";
206 lantiq,function = "ebu";
207 lantiq,pull = <1>;
208 };
209
210 phy-rst {
211 lantiq,pins = "io37", "io44";
212 lantiq,pull = <0>;
213 lantiq,open-drain = <0>;
214 lantiq,output = <1>;
215 };
216
217 pcie-rst {
218 lantiq,pins = "io21";
219 lantiq,pull = <0>;
220 lantiq,output = <1>;
221 };
222 };
223
224 pins_spi_default: pins_spi_default {
225 spi_in {
226 lantiq,groups = "spi_di";
227 lantiq,function = "spi";
228 };
229
230 spi_out {
231 lantiq,groups = "spi_do", "spi_clk",
232 "spi_cs4";
233 lantiq,function = "spi";
234 lantiq,output = <1>;
235 };
236 };
237 };
238
239 &pcie0 {
240 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
241
242 pcie@0 {
243 reg = <0 0 0 0 0>;
244 #interrupt-cells = <1>;
245 #size-cells = <2>;
246 #address-cells = <3>;
247 device_type = "pci";
248
249 wifi@0,0 {
250 compatible = "pci0,0";
251 reg = <0 0 0 0 0>;
252 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
253 };
254 };
255 };
256
257 &spi {
258 status = "okay";
259
260 pinctrl-names = "default";
261 pinctrl-0 = <&pins_spi_default>;
262
263 m25p80@4 {
264 compatible = "jedec,spi-nor";
265 reg = <4>;
266 spi-max-frequency = <1000000>;
267
268 partitions {
269 compatible = "fixed-partitions";
270 #address-cells = <1>;
271 #size-cells = <1>;
272
273 urlader: partition@0 {
274 reg = <0x0 0x20000>;
275 label = "urlader";
276 read-only;
277 };
278
279 partition@20000 {
280 reg = <0x20000 0x10000>;
281 label = "tffs (1)";
282 read-only;
283 };
284
285 partition@30000 {
286 reg = <0x30000 0x10000>;
287 label = "tffs (2)";
288 read-only;
289 };
290 };
291 };
292 };
293
294 &usb_phy0 {
295 status = "okay";
296 };
297
298 &usb_phy1 {
299 status = "okay";
300 };
301
302 &usb0 {
303 status = "okay";
304 vbus-supply = <&usb0_vbus>;
305 };
306
307 &usb1 {
308 status = "okay";
309 vbus-supply = <&usb1_vbus>;
310 };