target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370-REV2.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   5
   6 / {
   7         compatible = "avm,fritz3370-rev2", "lantiq,xway", "lantiq,vr9";
   8         model = "AVM Fritz!Box WLAN 3370 Rev. 2";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18                 led-upgrade = &power_green;
  19
  20                 led-dsl = &dsl;
  21                 led-internet = &info_green;
  22                 led-wifi = &wifi;
  23         };
  24
  25         memory@0 {
  26                 reg = <0x0 0x8000000>;
  27         };
  28
  29         gpio-poweroff {
  30                 compatible = "gpio-poweroff";
  31                 gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
  32         };
  33
  34         gpio-keys-polled {
  35                 compatible = "gpio-keys-polled";
  36                 #address-cells = <1>;
  37                 #size-cells = <0>;
  38                 poll-interval = <100>;
  39
  40                 power {
  41                         label = "power";
  42                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  43                         linux,code = <KEY_POWER>;
  44                 };
  45
  46                 wifi {
  47                         label = "wlan";
  48                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
  49                         linux,code = <KEY_WLAN>;
  50                 };
  51         };
  52
  53         gpio-leds {
  54                 compatible = "gpio-leds";
  55
  56                 power_green: power {
  57                         label = "fritz3370:green:power";
  58                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  59                         default-state = "keep";
  60                 };
  61
  62                 power_red: power2 {
  63                         label = "fritz3370:red:power";
  64                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 info_red {
  68                         label = "fritz3370:red:info";
  69                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 wifi: wifi {
  73                         label = "fritz3370:green:wlan";
  74                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  75                 };
  76
  77                 dsl: dsl {
  78                         label = "fritz3370:green:dsl";
  79                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  80                 };
  81
  82                 lan {
  83                         label = "fritz3370:green:lan";
  84                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  85                 };
  86
  87                 info_green: info_green {
  88                         label = "fritz3370:green:info";
  89                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  90                 };
  91         };
  92
  93         usb0_vbus: regulator-usb0-vbus {
  94                 compatible = "regulator-fixed";
  95
  96                 regulator-name = "USB0_VBUS";
  97
  98                 regulator-min-microvolt = <5000000>;
  99                 regulator-max-microvolt = <5000000>;
 100
 101                 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
 102                 enable-active-high;
 103         };
 104
 105         usb1_vbus: regulator-usb1-vbus {
 106                 compatible = "regulator-fixed";
 107
 108                 regulator-name = "USB1_VBUS";
 109
 110                 regulator-min-microvolt = <5000000>;
 111                 regulator-max-microvolt = <5000000>;
 112
 113                 gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
 114                 enable-active-high;
 115         };
 116 };
 117
 118 &eth0 {
 119         lan: interface@0 {
 120                 compatible = "lantiq,xrx200-pdi";
 121                 #address-cells = <1>;
 122                 #size-cells = <0>;
 123                 reg = <0>;
 124                 lantiq,switch;
 125
 126                 ethernet@0 {
 127                         compatible = "lantiq,xrx200-pdi-port";
 128                         reg = <0>;
 129                         phy-mode = "rgmii";
 130                         phy-handle = <&phy0>;
 131                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 132                 };
 133
 134                 ethernet@1 {
 135                         compatible = "lantiq,xrx200-pdi-port";
 136                         reg = <1>;
 137                         phy-mode = "rgmii";
 138                         phy-handle = <&phy1>;
 139                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
 140                 };
 141
 142                 ethernet@2 {
 143                         compatible = "lantiq,xrx200-pdi-port";
 144                         reg = <2>;
 145                         phy-mode = "gmii";
 146                         phy-handle = <&phy11>;
 147                 };
 148
 149                 ethernet@4 {
 150                         compatible = "lantiq,xrx200-pdi-port";
 151                         reg = <4>;
 152                         phy-mode = "gmii";
 153                         phy-handle = <&phy13>;
 154                 };
 155         };
 156
 157         mdio@0 {
 158                 #address-cells = <1>;
 159                 #size-cells = <0>;
 160                 compatible = "lantiq,xrx200-mdio";
 161                 reg = <0>;
 162
 163                 phy0: ethernet-phy@0 {
 164                         reg = <0x0>;
 165                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 166                 };
 167
 168                 phy1: ethernet-phy@1 {
 169                         reg = <0x1>;
 170                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 171                 };
 172
 173                 phy11: ethernet-phy@11 {
 174                         reg = <0x11>;
 175                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 176                 };
 177
 178                 phy13: ethernet-phy@13 {
 179                         reg = <0x13>;
 180                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 181                 };
 182         };
 183 };
 184
 185 &gphy0 {
 186         lantiq,gphy-mode = <GPHY_MODE_GE>;
 187 };
 188
 189 &gphy1 {
 190         lantiq,gphy-mode = <GPHY_MODE_GE>;
 191 };
 192
 193 &gpio {
 194         pinctrl-names = "default";
 195         pinctrl-0 = <&state_default>;
 196
 197         state_default: pinmux {
 198                 mdio {
 199                         lantiq,groups = "mdio";
 200                         lantiq,function = "mdio";
 201                 };
 202
 203                 nand {
 204                         lantiq,groups = "nand cle", "nand ale",
 205                                         "nand rd", "nand cs1", "nand rdy";
 206                         lantiq,function = "ebu";
 207                         lantiq,pull = <1>;
 208                 };
 209
 210                 phy-rst {
 211                         lantiq,pins = "io37", "io44";
 212                         lantiq,pull = <0>;
 213                         lantiq,open-drain = <0>;
 214                         lantiq,output = <1>;
 215                 };
 216
 217                 pcie-rst {
 218                         lantiq,pins = "io21";
 219                         lantiq,pull = <0>;
 220                         lantiq,output = <1>;
 221                 };
 222         };
 223
 224         pins_spi_default: pins_spi_default {
 225                 spi_in {
 226                         lantiq,groups = "spi_di";
 227                         lantiq,function = "spi";
 228                 };
 229
 230                 spi_out {
 231                         lantiq,groups = "spi_do", "spi_clk",
 232                                 "spi_cs4";
 233                         lantiq,function = "spi";
 234                         lantiq,output = <1>;
 235                 };
 236         };
 237 };
 238
 239 &pcie0 {
 240         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 241
 242         pcie@0 {
 243                 reg = <0 0 0 0 0>;
 244                 #interrupt-cells = <1>;
 245                 #size-cells = <2>;
 246                 #address-cells = <3>;
 247                 device_type = "pci";
 248
 249                 wifi@0,0 {
 250                         compatible = "pci0,0";
 251                         reg = <0 0 0 0 0>;
 252                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 253                 };
 254         };
 255 };
 256
 257 &spi {
 258         status = "okay";
 259
 260         pinctrl-names = "default";
 261         pinctrl-0 = <&pins_spi_default>;
 262
 263         m25p80@4 {
 264                 #address-cells = <1>;
 265                 #size-cells = <1>;
 266                 compatible = "jedec,spi-nor";
 267                 reg = <4 0>;
 268                 spi-max-frequency = <1000000>;
 269
 270                 urlader: partition@0 {
 271                         reg = <0x0 0x20000>;
 272                         label = "urlader";
 273                         read-only;
 274                 };
 275
 276                 partition@20000 {
 277                         reg = <0x20000 0x10000>;
 278                         label = "tffs (1)";
 279                         read-only;
 280                 };
 281
 282                 partition@30000 {
 283                         reg = <0x30000 0x10000>;
 284                         label = "tffs (2)";
 285                         read-only;
 286                 };
 287         };
 288 };
 289
 290 &usb_phy0 {
 291         status = "okay";
 292 };
 293
 294 &usb_phy1 {
 295         status = "okay";
 296 };
 297
 298 &usb0 {
 299         status = "okay";
 300         vbus-supply = <&usb0_vbus>;
 301 };
 302
 303 &usb1 {
 304         status = "okay";
 305         vbus-supply = <&usb1_vbus>;
 306 };