lantiq: dts: drop falcon clock node
[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / FRITZ7312.dts
1 /dts-v1/;
2
3 #include "ar9.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 compatible = "avm,fritz7312", "lantiq,xway", "lantiq,ar9";
9 model = "AVM FRITZ!Box 7312";
10
11 chosen {
12 bootargs = "console=ttyLTQ0,115200";
13 };
14
15 aliases {
16 led-boot = &power;
17 led-failsafe = &power;
18 led-running = &power;
19 led-upgrade = &power;
20
21 led-internet = &info_green;
22 led-dsl = &power;
23 led-wifi = &wlan;
24 };
25
26 memory@0 {
27 device_type = "memory";
28 reg = <0x0 0x4000000>;
29 };
30
31 gpio-keys-polled {
32 compatible = "gpio-keys-polled";
33 poll-interval = <100>;
34
35 wlan {
36 label = "wlan";
37 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
38 linux,code = <KEY_RFKILL>;
39 };
40 dect {
41 label = "dect";
42 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_PHONE>;
44 };
45 };
46
47 gpio-leds {
48 compatible = "gpio-leds";
49
50 power: power {
51 label = "fritz7312:green:power";
52 gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
53 default-state = "keep";
54 };
55 voice {
56 label = "fritz7312:green:fon";
57 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
58 };
59 dect {
60 label = "fritz7312:green:dect";
61 gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
62 };
63 wlan: wlan {
64 label = "fritz7312:green:wlan";
65 gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
66 };
67 info_green: info_green {
68 label = "fritz7312:green:info";
69 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
70 };
71 };
72 };
73
74 &gpio {
75 pinctrl-names = "default";
76 pinctrl-0 = <&state_default>;
77
78 state_default: pinmux {
79 pci {
80 lantiq,groups = "gnt1", "req1", "req2", "req4", "gnt2", "gnt3", "gnt4";
81 lantiq,function = "pci";
82 };
83 pci-in {
84 lantiq,groups = "req1", "req2", "req4";
85 lantiq,output = <0>;
86 lantiq,open-drain = <1>;
87 lantiq,pull = <2>;
88 };
89 pci-out {
90 lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
91 lantiq,output = <1>;
92 lantiq,pull = <0>;
93 };
94 ar8030-intr {
95 lantiq,groups = "exin3";
96 lantiq,function = "exin";
97 lantiq,pull = <2>;
98 lantiq,output = <0>;
99 };
100 ar8030-clk {
101 lantiq,groups = "clkout2";
102 lantiq,output = <1>;
103 lantiq,open-drain;
104 };
105 ar8030-rst {
106 lantiq,pins = "io34";
107 lantiq,output = <1>;
108 lantiq,pull = <2>;
109 lantiq,open-drain;
110 };
111 };
112 };
113
114 &gsw {
115 phy-mode = "rmii";
116 phy-handle = <&phy0>;
117 mtd-mac-address = <&ath9k_cal 0xa91>;
118 mtd-mac-address-increment = <(-2)>;
119
120 mdio-bus {
121 #address-cells = <1>;
122 #size-cells = <0>;
123
124 phy0: ethernet-phy@0 {
125 reg = <0>;
126 reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
127 };
128 };
129 };
130
131 &localbus {
132 nor@0 {
133 compatible = "lantiq,nor";
134 bank-width = <2>;
135 reg = <0 0x0 0x1000000>;
136
137 partitions {
138 compatible = "fixed-partitions";
139 #address-cells = <1>;
140 #size-cells = <1>;
141
142 ath9k_cal: partition@0 {
143 label = "urlader";
144 reg = <0x00000 0x20000>;
145 read-only;
146 };
147
148 partition@20000 {
149 label = "firmware";
150 reg = <0x20000 0xf60000>;
151 };
152
153 partition@f80000 {
154 label = "tffs (1)";
155 reg = <0xf80000 0x40000>;
156 read-only;
157 };
158
159 partition@fc0000 {
160 label = "tffs (2)";
161 reg = <0xfc0000 0x40000>;
162 read-only;
163 };
164 };
165 };
166 };
167
168 &pci0 {
169 status = "okay";
170 req-mask = <0xf>;
171 gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>;
172
173 wifi@0,0 {
174 compatible = "pci0,0";
175 reg = <0x7000 0 0 0 0>;
176 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
177 };
178 };